Commit 0f8e7414 authored by Stephan Gerhold's avatar Stephan Gerhold Committed by Linus Walleij

ARM: dts: ux500: Move generic pin configs out of ste-href-family-pinctrl.dtsi

All existing Ux500 boards make use of ste-href-family-pinctrl.dtsi,
which contains shared pin configurations for UART, I2C and SDI.
Most of these can be also used for devices not based on HREF.

Move the generic pin configs into a new device tree include
"ste-dbx5x0-pinctrl.dtsi". There is no functional change (yet),
as a next step we will rename the pin configs to use more generic
names.
Signed-off-by: default avatarStephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191125122256.53482-1-stephan@gerhold.netSigned-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 6cfeb611
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2013 Linaro Ltd.
*/
#include "ste-nomadik-pinctrl.dtsi"
&pinctrl {
/* Settings for all UART default and sleep states */
uart0 {
uart0_default_mode: uart0_default {
default_mux {
function = "u0";
groups = "u0_a_1";
};
default_cfg1 {
pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
ste,config = <&in_pu>;
};
default_cfg2 {
pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
ste,config = <&out_hi>;
};
};
uart0_sleep_mode: uart0_sleep {
sleep_cfg1 {
pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
ste,config = <&slpm_in_wkup_pdis>;
};
sleep_cfg2 {
pins = "GPIO1_AJ3"; /* RTS */
ste,config = <&slpm_out_hi_wkup_pdis>;
};
sleep_cfg3 {
pins = "GPIO3_AH3"; /* TXD */
ste,config = <&slpm_out_wkup_pdis>;
};
};
};
uart1 {
uart1_default_mode: uart1_default {
default_mux {
function = "u1";
groups = "u1rxtx_a_1";
};
default_cfg1 {
pins = "GPIO4_AH6"; /* RXD */
ste,config = <&in_pu>;
};
default_cfg2 {
pins = "GPIO5_AG6"; /* TXD */
ste,config = <&out_hi>;
};
};
uart1_sleep_mode: uart1_sleep {
sleep_cfg1 {
pins = "GPIO4_AH6"; /* RXD */
ste,config = <&slpm_in_wkup_pdis>;
};
sleep_cfg2 {
pins = "GPIO5_AG6"; /* TXD */
ste,config = <&slpm_out_wkup_pdis>;
};
};
};
uart2 {
uart2_default_mode: uart2_default {
default_mux {
function = "u2";
groups = "u2rxtx_c_1";
};
default_cfg1 {
pins = "GPIO29_W2"; /* RXD */
ste,config = <&in_pu>;
};
default_cfg2 {
pins = "GPIO30_W3"; /* TXD */
ste,config = <&out_hi>;
};
};
uart2_sleep_mode: uart2_sleep {
sleep_cfg1 {
pins = "GPIO29_W2"; /* RXD */
ste,config = <&in_wkup_pdis>;
};
sleep_cfg2 {
pins = "GPIO30_W3"; /* TXD */
ste,config = <&out_wkup_pdis>;
};
};
};
/* Settings for all I2C default and sleep states */
i2c0 {
i2c0_default_mode: i2c_default {
default_mux {
function = "i2c0";
groups = "i2c0_a_1";
};
default_cfg1 {
pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c0_sleep_mode: i2c_sleep {
sleep_cfg1 {
pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
i2c1 {
i2c1_default_mode: i2c_default {
default_mux {
function = "i2c1";
groups = "i2c1_b_2";
};
default_cfg1 {
pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c1_sleep_mode: i2c_sleep {
sleep_cfg1 {
pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
i2c2 {
i2c2_default_mode: i2c_default {
default_mux {
function = "i2c2";
groups = "i2c2_b_2";
};
default_cfg1 {
pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c2_sleep_mode: i2c_sleep {
sleep_cfg1 {
pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
i2c3 {
i2c3_default_mode: i2c_default {
default_mux {
function = "i2c3";
groups = "i2c3_c_2";
};
default_cfg1 {
pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c3_sleep_mode: i2c_sleep {
sleep_cfg1 {
pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
/*
* Activating I2C4 will conflict with UART1 about the same pins so do not
* enable I2C4 and UART1 at the same time.
*/
i2c4 {
i2c4_default_mode: i2c_default {
default_mux {
function = "i2c4";
groups = "i2c4_b_1";
};
default_cfg1 {
pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c4_sleep_mode: i2c_sleep {
sleep_cfg1 {
pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
/* Settings for all MMC/SD/SDIO default and sleep states */
sdi0 {
/* This is the external SD card slot, 4 bits wide */
sdi0_default_mode: sdi0_default {
default_mux {
function = "mc0";
groups = "mc0_a_1";
};
default_cfg1 {
pins =
"GPIO18_AC2", /* CMDDIR */
"GPIO19_AC1", /* DAT0DIR */
"GPIO20_AB4"; /* DAT2DIR */
ste,config = <&out_hi>;
};
default_cfg2 {
pins = "GPIO22_AA3"; /* FBCLK */
ste,config = <&in_nopull>;
};
default_cfg3 {
pins = "GPIO23_AA4"; /* CLK */
ste,config = <&out_lo>;
};
default_cfg4 {
pins =
"GPIO24_AB2", /* CMD */
"GPIO25_Y4", /* DAT0 */
"GPIO26_Y2", /* DAT1 */
"GPIO27_AA2", /* DAT2 */
"GPIO28_AA1"; /* DAT3 */
ste,config = <&in_pu>;
};
};
sdi0_sleep_mode: sdi0_sleep {
sleep_cfg1 {
pins =
"GPIO18_AC2", /* CMDDIR */
"GPIO19_AC1", /* DAT0DIR */
"GPIO20_AB4"; /* DAT2DIR */
ste,config = <&slpm_out_hi_wkup_pdis>;
};
sleep_cfg2 {
pins =
"GPIO22_AA3", /* FBCLK */
"GPIO24_AB2", /* CMD */
"GPIO25_Y4", /* DAT0 */
"GPIO26_Y2", /* DAT1 */
"GPIO27_AA2", /* DAT2 */
"GPIO28_AA1"; /* DAT3 */
ste,config = <&slpm_in_wkup_pdis>;
};
sleep_cfg3 {
pins = "GPIO23_AA4"; /* CLK */
ste,config = <&slpm_out_lo_wkup_pdis>;
};
};
};
sdi1 {
/* This is the WLAN SDIO 4 bits wide */
sdi1_default_mode: sdi1_default {
default_mux {
function = "mc1";
groups = "mc1_a_1";
};
default_cfg1 {
pins = "GPIO208_AH16"; /* CLK */
ste,config = <&out_lo>;
};
default_cfg2 {
pins = "GPIO209_AG15"; /* FBCLK */
ste,config = <&in_nopull>;
};
default_cfg3 {
pins =
"GPIO210_AJ15", /* CMD */
"GPIO211_AG14", /* DAT0 */
"GPIO212_AF13", /* DAT1 */
"GPIO213_AG13", /* DAT2 */
"GPIO214_AH15"; /* DAT3 */
ste,config = <&in_pu>;
};
};
sdi1_sleep_mode: sdi1_sleep {
sleep_cfg1 {
pins = "GPIO208_AH16"; /* CLK */
ste,config = <&slpm_out_lo_wkup_pdis>;
};
sleep_cfg2 {
pins =
"GPIO209_AG15", /* FBCLK */
"GPIO210_AJ15", /* CMD */
"GPIO211_AG14", /* DAT0 */
"GPIO212_AF13", /* DAT1 */
"GPIO213_AG13", /* DAT2 */
"GPIO214_AH15"; /* DAT3 */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
sdi2 {
/* This is the eMMC 8 bits wide, usually PoP eMMC */
sdi2_default_mode: sdi2_default {
default_mux {
function = "mc2";
groups = "mc2_a_1";
};
default_cfg1 {
pins = "GPIO128_A5"; /* CLK */
ste,config = <&out_lo>;
};
default_cfg2 {
pins = "GPIO130_C8"; /* FBCLK */
ste,config = <&in_nopull>;
};
default_cfg3 {
pins =
"GPIO129_B4", /* CMD */
"GPIO131_A12", /* DAT0 */
"GPIO132_C10", /* DAT1 */
"GPIO133_B10", /* DAT2 */
"GPIO134_B9", /* DAT3 */
"GPIO135_A9", /* DAT4 */
"GPIO136_C7", /* DAT5 */
"GPIO137_A7", /* DAT6 */
"GPIO138_C5"; /* DAT7 */
ste,config = <&in_pu>;
};
};
sdi2_sleep_mode: sdi2_sleep {
sleep_cfg1 {
pins = "GPIO128_A5"; /* CLK */
ste,config = <&out_lo_wkup_pdis>;
};
sleep_cfg2 {
pins =
"GPIO130_C8", /* FBCLK */
"GPIO129_B4"; /* CMD */
ste,config = <&in_wkup_pdis_en>;
};
sleep_cfg3 {
pins =
"GPIO131_A12", /* DAT0 */
"GPIO132_C10", /* DAT1 */
"GPIO133_B10", /* DAT2 */
"GPIO134_B9", /* DAT3 */
"GPIO135_A9", /* DAT4 */
"GPIO136_C7", /* DAT5 */
"GPIO137_A7", /* DAT6 */
"GPIO138_C5"; /* DAT7 */
ste,config = <&in_wkup_pdis>;
};
};
};
sdi4 {
/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
sdi4_default_mode: sdi4_default {
default_mux {
function = "mc4";
groups = "mc4_a_1";
};
default_cfg1 {
pins = "GPIO203_AE23"; /* CLK */
ste,config = <&out_lo>;
};
default_cfg2 {
pins = "GPIO202_AF25"; /* FBCLK */
ste,config = <&in_nopull>;
};
default_cfg3 {
pins =
"GPIO201_AF24", /* CMD */
"GPIO200_AH26", /* DAT0 */
"GPIO199_AH23", /* DAT1 */
"GPIO198_AG25", /* DAT2 */
"GPIO197_AH24", /* DAT3 */
"GPIO207_AJ23", /* DAT4 */
"GPIO206_AG24", /* DAT5 */
"GPIO205_AG23", /* DAT6 */
"GPIO204_AF23"; /* DAT7 */
ste,config = <&in_pu>;
};
};
sdi4_sleep_mode: sdi4_sleep {
sleep_cfg1 {
pins = "GPIO203_AE23"; /* CLK */
ste,config = <&out_lo_wkup_pdis>;
};
sleep_cfg2 {
pins =
"GPIO202_AF25", /* FBCLK */
"GPIO201_AF24", /* CMD */
"GPIO200_AH26", /* DAT0 */
"GPIO199_AH23", /* DAT1 */
"GPIO198_AG25", /* DAT2 */
"GPIO197_AH24", /* DAT3 */
"GPIO207_AJ23", /* DAT4 */
"GPIO206_AG24", /* DAT5 */
"GPIO205_AG23", /* DAT6 */
"GPIO204_AF23"; /* DAT7 */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
/*
* Multi-rate serial ports (MSPs) - MSP3 output is internal and
* cannot be muxed onto any pins.
*/
msp0 {
msp0_default_mode: msp0_default {
default_msp0_mux {
function = "msp0";
groups = "msp0txrx_a_1", "msp0tfstck_a_1";
};
default_msp0_cfg {
pins =
"GPIO12_AC4", /* TXD */
"GPIO15_AC3", /* RXD */
"GPIO13_AF3", /* TFS */
"GPIO14_AE3"; /* TCK */
ste,config = <&in_nopull>;
};
};
};
msp1 {
msp1_default_mode: msp1_default {
default_mux {
function = "msp1";
groups = "msp1txrx_a_1", "msp1_a_1";
};
default_cfg1 {
pins = "GPIO33_AF2";
ste,config = <&out_lo>;
};
default_cfg2 {
pins =
"GPIO34_AE1",
"GPIO35_AE2",
"GPIO36_AG2";
ste,config = <&in_nopull>;
};
};
};
msp2 {
msp2_default_mode: msp2_default {
/* MSP2 usually used for HDMI audio */
default_mux {
function = "msp2";
groups = "msp2_a_1";
};
default_cfg1 {
pins =
"GPIO193_AH27", /* TXD */
"GPIO194_AF27", /* TCK */
"GPIO195_AG28"; /* TFS */
ste,config = <&in_pd>;
};
default_cfg2 {
pins = "GPIO196_AG26"; /* RXD */
ste,config = <&out_lo>;
};
};
};
musb {
musb_default_mode: musb_default {
default_mux {
function = "usb";
groups = "usb_a_1";
};
default_cfg1 {
pins =
"GPIO256_AF28", /* NXT */
"GPIO258_AD29", /* XCLK */
"GPIO259_AC29", /* DIR */
"GPIO260_AD28", /* DAT7 */
"GPIO261_AD26", /* DAT6 */
"GPIO262_AE26", /* DAT5 */
"GPIO263_AG29", /* DAT4 */
"GPIO264_AE27", /* DAT3 */
"GPIO265_AD27", /* DAT2 */
"GPIO266_AC28", /* DAT1 */
"GPIO267_AC27"; /* DAT0 */
ste,config = <&in_nopull>;
};
default_cfg2 {
pins = "GPIO257_AE29"; /* STP */
ste,config = <&out_hi>;
};
};
musb_sleep_mode: musb_sleep {
sleep_cfg1 {
pins =
"GPIO256_AF28", /* NXT */
"GPIO258_AD29", /* XCLK */
"GPIO259_AC29"; /* DIR */
ste,config = <&slpm_wkup_pdis_en>;
};
sleep_cfg2 {
pins = "GPIO257_AE29"; /* STP */
ste,config = <&slpm_out_hi_wkup_pdis>;
};
sleep_cfg3 {
pins =
"GPIO260_AD28", /* DAT7 */
"GPIO261_AD26", /* DAT6 */
"GPIO262_AE26", /* DAT5 */
"GPIO263_AG29", /* DAT4 */
"GPIO264_AE27", /* DAT3 */
"GPIO265_AD27", /* DAT2 */
"GPIO266_AC28", /* DAT1 */
"GPIO267_AC27"; /* DAT0 */
ste,config = <&slpm_in_wkup_pdis_en>;
};
};
};
};
...@@ -3,212 +3,11 @@ ...@@ -3,212 +3,11 @@
* Copyright 2013 Linaro Ltd. * Copyright 2013 Linaro Ltd.
*/ */
#include "ste-nomadik-pinctrl.dtsi" #include "ste-dbx5x0-pinctrl.dtsi"
/ { / {
soc { soc {
pinctrl { pinctrl {
/* Settings for all UART default and sleep states */
uart0 {
uart0_default_mode: uart0_default {
default_mux {
function = "u0";
groups = "u0_a_1";
};
default_cfg1 {
pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
ste,config = <&in_pu>;
};
default_cfg2 {
pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
ste,config = <&out_hi>;
};
};
uart0_sleep_mode: uart0_sleep {
sleep_cfg1 {
pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
ste,config = <&slpm_in_wkup_pdis>;
};
sleep_cfg2 {
pins = "GPIO1_AJ3"; /* RTS */
ste,config = <&slpm_out_hi_wkup_pdis>;
};
sleep_cfg3 {
pins = "GPIO3_AH3"; /* TXD */
ste,config = <&slpm_out_wkup_pdis>;
};
};
};
uart1 {
uart1_default_mode: uart1_default {
default_mux {
function = "u1";
groups = "u1rxtx_a_1";
};
default_cfg1 {
pins = "GPIO4_AH6"; /* RXD */
ste,config = <&in_pu>;
};
default_cfg2 {
pins = "GPIO5_AG6"; /* TXD */
ste,config = <&out_hi>;
};
};
uart1_sleep_mode: uart1_sleep {
sleep_cfg1 {
pins = "GPIO4_AH6"; /* RXD */
ste,config = <&slpm_in_wkup_pdis>;
};
sleep_cfg2 {
pins = "GPIO5_AG6"; /* TXD */
ste,config = <&slpm_out_wkup_pdis>;
};
};
};
uart2 {
uart2_default_mode: uart2_default {
default_mux {
function = "u2";
groups = "u2rxtx_c_1";
};
default_cfg1 {
pins = "GPIO29_W2"; /* RXD */
ste,config = <&in_pu>;
};
default_cfg2 {
pins = "GPIO30_W3"; /* TXD */
ste,config = <&out_hi>;
};
};
uart2_sleep_mode: uart2_sleep {
sleep_cfg1 {
pins = "GPIO29_W2"; /* RXD */
ste,config = <&in_wkup_pdis>;
};
sleep_cfg2 {
pins = "GPIO30_W3"; /* TXD */
ste,config = <&out_wkup_pdis>;
};
};
};
/* Settings for all I2C default and sleep states */
i2c0 {
i2c0_default_mode: i2c_default {
default_mux {
function = "i2c0";
groups = "i2c0_a_1";
};
default_cfg1 {
pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c0_sleep_mode: i2c_sleep {
sleep_cfg1 {
pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
i2c1 {
i2c1_default_mode: i2c_default {
default_mux {
function = "i2c1";
groups = "i2c1_b_2";
};
default_cfg1 {
pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c1_sleep_mode: i2c_sleep {
sleep_cfg1 {
pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
i2c2 {
i2c2_default_mode: i2c_default {
default_mux {
function = "i2c2";
groups = "i2c2_b_2";
};
default_cfg1 {
pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c2_sleep_mode: i2c_sleep {
sleep_cfg1 {
pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
i2c3 {
i2c3_default_mode: i2c_default {
default_mux {
function = "i2c3";
groups = "i2c3_c_2";
};
default_cfg1 {
pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c3_sleep_mode: i2c_sleep {
sleep_cfg1 {
pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
/*
* Activating I2C4 will conflict with UART1 about the same pins so do not
* enable I2C4 and UART1 at the same time.
*/
i2c4 {
i2c4_default_mode: i2c_default {
default_mux {
function = "i2c4";
groups = "i2c4_b_1";
};
default_cfg1 {
pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
ste,config = <&in_pu>;
};
};
i2c4_sleep_mode: i2c_sleep {
sleep_cfg1 {
pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
/* Settings for all SPI default and sleep states */ /* Settings for all SPI default and sleep states */
spi2 { spi2 {
spi2_default_mode: spi_default { spi2_default_mode: spi_default {
...@@ -270,335 +69,6 @@ sleep_cfg3 { ...@@ -270,335 +69,6 @@ sleep_cfg3 {
}; };
}; };
/* Settings for all MMC/SD/SDIO default and sleep states */
sdi0 {
/* This is the external SD card slot, 4 bits wide */
sdi0_default_mode: sdi0_default {
default_mux {
function = "mc0";
groups = "mc0_a_1";
};
default_cfg1 {
pins =
"GPIO18_AC2", /* CMDDIR */
"GPIO19_AC1", /* DAT0DIR */
"GPIO20_AB4"; /* DAT2DIR */
ste,config = <&out_hi>;
};
default_cfg2 {
pins = "GPIO22_AA3"; /* FBCLK */
ste,config = <&in_nopull>;
};
default_cfg3 {
pins = "GPIO23_AA4"; /* CLK */
ste,config = <&out_lo>;
};
default_cfg4 {
pins =
"GPIO24_AB2", /* CMD */
"GPIO25_Y4", /* DAT0 */
"GPIO26_Y2", /* DAT1 */
"GPIO27_AA2", /* DAT2 */
"GPIO28_AA1"; /* DAT3 */
ste,config = <&in_pu>;
};
};
sdi0_sleep_mode: sdi0_sleep {
sleep_cfg1 {
pins =
"GPIO18_AC2", /* CMDDIR */
"GPIO19_AC1", /* DAT0DIR */
"GPIO20_AB4"; /* DAT2DIR */
ste,config = <&slpm_out_hi_wkup_pdis>;
};
sleep_cfg2 {
pins =
"GPIO22_AA3", /* FBCLK */
"GPIO24_AB2", /* CMD */
"GPIO25_Y4", /* DAT0 */
"GPIO26_Y2", /* DAT1 */
"GPIO27_AA2", /* DAT2 */
"GPIO28_AA1"; /* DAT3 */
ste,config = <&slpm_in_wkup_pdis>;
};
sleep_cfg3 {
pins = "GPIO23_AA4"; /* CLK */
ste,config = <&slpm_out_lo_wkup_pdis>;
};
};
};
sdi1 {
/* This is the WLAN SDIO 4 bits wide */
sdi1_default_mode: sdi1_default {
default_mux {
function = "mc1";
groups = "mc1_a_1";
};
default_cfg1 {
pins = "GPIO208_AH16"; /* CLK */
ste,config = <&out_lo>;
};
default_cfg2 {
pins = "GPIO209_AG15"; /* FBCLK */
ste,config = <&in_nopull>;
};
default_cfg3 {
pins =
"GPIO210_AJ15", /* CMD */
"GPIO211_AG14", /* DAT0 */
"GPIO212_AF13", /* DAT1 */
"GPIO213_AG13", /* DAT2 */
"GPIO214_AH15"; /* DAT3 */
ste,config = <&in_pu>;
};
};
sdi1_sleep_mode: sdi1_sleep {
sleep_cfg1 {
pins = "GPIO208_AH16"; /* CLK */
ste,config = <&slpm_out_lo_wkup_pdis>;
};
sleep_cfg2 {
pins =
"GPIO209_AG15", /* FBCLK */
"GPIO210_AJ15", /* CMD */
"GPIO211_AG14", /* DAT0 */
"GPIO212_AF13", /* DAT1 */
"GPIO213_AG13", /* DAT2 */
"GPIO214_AH15"; /* DAT3 */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
sdi2 {
/* This is the eMMC 8 bits wide, usually PoP eMMC */
sdi2_default_mode: sdi2_default {
default_mux {
function = "mc2";
groups = "mc2_a_1";
};
default_cfg1 {
pins = "GPIO128_A5"; /* CLK */
ste,config = <&out_lo>;
};
default_cfg2 {
pins = "GPIO130_C8"; /* FBCLK */
ste,config = <&in_nopull>;
};
default_cfg3 {
pins =
"GPIO129_B4", /* CMD */
"GPIO131_A12", /* DAT0 */
"GPIO132_C10", /* DAT1 */
"GPIO133_B10", /* DAT2 */
"GPIO134_B9", /* DAT3 */
"GPIO135_A9", /* DAT4 */
"GPIO136_C7", /* DAT5 */
"GPIO137_A7", /* DAT6 */
"GPIO138_C5"; /* DAT7 */
ste,config = <&in_pu>;
};
};
sdi2_sleep_mode: sdi2_sleep {
sleep_cfg1 {
pins = "GPIO128_A5"; /* CLK */
ste,config = <&out_lo_wkup_pdis>;
};
sleep_cfg2 {
pins =
"GPIO130_C8", /* FBCLK */
"GPIO129_B4"; /* CMD */
ste,config = <&in_wkup_pdis_en>;
};
sleep_cfg3 {
pins =
"GPIO131_A12", /* DAT0 */
"GPIO132_C10", /* DAT1 */
"GPIO133_B10", /* DAT2 */
"GPIO134_B9", /* DAT3 */
"GPIO135_A9", /* DAT4 */
"GPIO136_C7", /* DAT5 */
"GPIO137_A7", /* DAT6 */
"GPIO138_C5"; /* DAT7 */
ste,config = <&in_wkup_pdis>;
};
};
};
sdi4 {
/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
sdi4_default_mode: sdi4_default {
default_mux {
function = "mc4";
groups = "mc4_a_1";
};
default_cfg1 {
pins = "GPIO203_AE23"; /* CLK */
ste,config = <&out_lo>;
};
default_cfg2 {
pins = "GPIO202_AF25"; /* FBCLK */
ste,config = <&in_nopull>;
};
default_cfg3 {
pins =
"GPIO201_AF24", /* CMD */
"GPIO200_AH26", /* DAT0 */
"GPIO199_AH23", /* DAT1 */
"GPIO198_AG25", /* DAT2 */
"GPIO197_AH24", /* DAT3 */
"GPIO207_AJ23", /* DAT4 */
"GPIO206_AG24", /* DAT5 */
"GPIO205_AG23", /* DAT6 */
"GPIO204_AF23"; /* DAT7 */
ste,config = <&in_pu>;
};
};
sdi4_sleep_mode: sdi4_sleep {
sleep_cfg1 {
pins = "GPIO203_AE23"; /* CLK */
ste,config = <&out_lo_wkup_pdis>;
};
sleep_cfg2 {
pins =
"GPIO202_AF25", /* FBCLK */
"GPIO201_AF24", /* CMD */
"GPIO200_AH26", /* DAT0 */
"GPIO199_AH23", /* DAT1 */
"GPIO198_AG25", /* DAT2 */
"GPIO197_AH24", /* DAT3 */
"GPIO207_AJ23", /* DAT4 */
"GPIO206_AG24", /* DAT5 */
"GPIO205_AG23", /* DAT6 */
"GPIO204_AF23"; /* DAT7 */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
/*
* Multi-rate serial ports (MSPs) - MSP3 output is internal and
* cannot be muxed onto any pins.
*/
msp0 {
msp0_default_mode: msp0_default {
default_msp0_mux {
function = "msp0";
groups = "msp0txrx_a_1", "msp0tfstck_a_1";
};
default_msp0_cfg {
pins =
"GPIO12_AC4", /* TXD */
"GPIO15_AC3", /* RXD */
"GPIO13_AF3", /* TFS */
"GPIO14_AE3"; /* TCK */
ste,config = <&in_nopull>;
};
};
};
msp1 {
msp1_default_mode: msp1_default {
default_mux {
function = "msp1";
groups = "msp1txrx_a_1", "msp1_a_1";
};
default_cfg1 {
pins = "GPIO33_AF2";
ste,config = <&out_lo>;
};
default_cfg2 {
pins =
"GPIO34_AE1",
"GPIO35_AE2",
"GPIO36_AG2";
ste,config = <&in_nopull>;
};
};
};
msp2 {
msp2_default_mode: msp2_default {
/* MSP2 usually used for HDMI audio */
default_mux {
function = "msp2";
groups = "msp2_a_1";
};
default_cfg1 {
pins =
"GPIO193_AH27", /* TXD */
"GPIO194_AF27", /* TCK */
"GPIO195_AG28"; /* TFS */
ste,config = <&in_pd>;
};
default_cfg2 {
pins = "GPIO196_AG26"; /* RXD */
ste,config = <&out_lo>;
};
};
};
musb {
musb_default_mode: musb_default {
default_mux {
function = "usb";
groups = "usb_a_1";
};
default_cfg1 {
pins =
"GPIO256_AF28", /* NXT */
"GPIO258_AD29", /* XCLK */
"GPIO259_AC29", /* DIR */
"GPIO260_AD28", /* DAT7 */
"GPIO261_AD26", /* DAT6 */
"GPIO262_AE26", /* DAT5 */
"GPIO263_AG29", /* DAT4 */
"GPIO264_AE27", /* DAT3 */
"GPIO265_AD27", /* DAT2 */
"GPIO266_AC28", /* DAT1 */
"GPIO267_AC27"; /* DAT0 */
ste,config = <&in_nopull>;
};
default_cfg2 {
pins = "GPIO257_AE29"; /* STP */
ste,config = <&out_hi>;
};
};
musb_sleep_mode: musb_sleep {
sleep_cfg1 {
pins =
"GPIO256_AF28", /* NXT */
"GPIO258_AD29", /* XCLK */
"GPIO259_AC29"; /* DIR */
ste,config = <&slpm_wkup_pdis_en>;
};
sleep_cfg2 {
pins = "GPIO257_AE29"; /* STP */
ste,config = <&slpm_out_hi_wkup_pdis>;
};
sleep_cfg3 {
pins =
"GPIO260_AD28", /* DAT7 */
"GPIO261_AD26", /* DAT6 */
"GPIO262_AE26", /* DAT5 */
"GPIO263_AG29", /* DAT4 */
"GPIO264_AE27", /* DAT3 */
"GPIO265_AD27", /* DAT2 */
"GPIO266_AC28", /* DAT1 */
"GPIO267_AC27"; /* DAT0 */
ste,config = <&slpm_in_wkup_pdis_en>;
};
};
};
mcde { mcde {
lcd_default_mode: lcd_default { lcd_default_mode: lcd_default {
default_mux1 { default_mux1 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment