Commit 1186fa85 authored by Paulo Zanoni's avatar Paulo Zanoni

drm/i915/gen9: minimum scanlines for Y tile is not always 4

During watermarks calculations, this value is used in 3 different
places. Only one of them was not using a hardcoded 4. Move the code up
so everybody can benefit from the actual value.

This should only help on situations with Y tiling + 90/270 rotation +
1 or 2 bpp or NV12.

Cc: stable@vger.kernel.org
Reviewed-by: default avatarMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-6-git-send-email-paulo.r.zanoni@intel.com
parent 0727e40a
......@@ -3495,7 +3495,8 @@ static uint32_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp, uint32_t latenc
static uint32_t skl_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal,
uint32_t horiz_pixels, uint8_t cpp,
uint64_t tiling, uint32_t latency)
uint64_t tiling, uint32_t latency,
uint32_t y_min_scanlines)
{
uint32_t ret;
uint32_t plane_bytes_per_line, plane_blocks_per_line;
......@@ -3508,9 +3509,9 @@ static uint32_t skl_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal,
if (tiling == I915_FORMAT_MOD_Y_TILED ||
tiling == I915_FORMAT_MOD_Yf_TILED) {
plane_bytes_per_line *= 4;
plane_bytes_per_line *= y_min_scanlines;
plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
plane_blocks_per_line /= 4;
plane_blocks_per_line /= y_min_scanlines;
} else if (tiling == DRM_FORMAT_MOD_NONE) {
plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512) + 1;
} else {
......@@ -3567,6 +3568,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
uint8_t cpp;
uint32_t width = 0, height = 0;
uint32_t plane_pixel_rate;
uint32_t y_min_scanlines;
if (latency == 0 || !cstate->base.active || !intel_pstate->base.visible) {
*enabled = false;
......@@ -3582,21 +3584,6 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
cpp = drm_format_plane_cpp(fb->pixel_format, 0);
plane_pixel_rate = skl_adjusted_plane_pixel_rate(cstate, intel_pstate);
method1 = skl_wm_method1(plane_pixel_rate, cpp, latency);
method2 = skl_wm_method2(plane_pixel_rate,
cstate->base.adjusted_mode.crtc_htotal,
width,
cpp,
fb->modifier[0],
latency);
plane_bytes_per_line = width * cpp;
plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED) {
uint32_t min_scanlines = 4;
uint32_t y_tile_minimum;
if (intel_rotation_90_or_270(pstate->rotation)) {
int cpp = (fb->pixel_format == DRM_FORMAT_NV12) ?
drm_format_plane_cpp(fb->pixel_format, 1) :
......@@ -3604,16 +3591,37 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
switch (cpp) {
case 1:
min_scanlines = 16;
y_min_scanlines = 16;
break;
case 2:
min_scanlines = 8;
y_min_scanlines = 8;
break;
case 8:
default:
WARN(1, "Unsupported pixel depth for rotation");
case 4:
y_min_scanlines = 4;
break;
}
} else {
y_min_scanlines = 4;
}
y_tile_minimum = plane_blocks_per_line * min_scanlines;
method1 = skl_wm_method1(plane_pixel_rate, cpp, latency);
method2 = skl_wm_method2(plane_pixel_rate,
cstate->base.adjusted_mode.crtc_htotal,
width,
cpp,
fb->modifier[0],
latency,
y_min_scanlines);
plane_bytes_per_line = width * cpp;
plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED) {
uint32_t y_tile_minimum = plane_blocks_per_line *
y_min_scanlines;
selected_result = max(method2, y_tile_minimum);
} else {
if ((ddb_allocation / plane_blocks_per_line) >= 1)
......@@ -3628,7 +3636,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
if (level >= 1 && level <= 7) {
if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED)
res_lines += 4;
res_lines += y_min_scanlines;
else
res_blocks++;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment