Commit 12315576 authored by Yakir Yang's avatar Yakir Yang

ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver

After exynos_dp have been split the common IP code into analogix_dp driver,
the analogix_dp driver have deprecated some Samsung platform properties which
could be dynamically parsed from EDID/MODE/DPCD message, so this is an update
for Exynos DTS file for dp-controller.

Beside the backward compatibility is fully preserved, so there are no
bisectability break that make this change in a separate patch.
Reviewed-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: default avatarYakir Yang <ykk@rock-chips.com>
parent 70433061
...@@ -124,8 +124,6 @@ &cpu0 { ...@@ -124,8 +124,6 @@ &cpu0 {
&dp { &dp {
status = "okay"; status = "okay";
samsung,color-space = <0>; samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>; samsung,color-depth = <1>;
samsung,link-rate = <0x0a>; samsung,link-rate = <0x0a>;
samsung,lane-count = <4>; samsung,lane-count = <4>;
......
...@@ -80,8 +80,6 @@ &cpu0 { ...@@ -80,8 +80,6 @@ &cpu0 {
&dp { &dp {
samsung,color-space = <0>; samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>; samsung,color-depth = <1>;
samsung,link-rate = <0x0a>; samsung,link-rate = <0x0a>;
samsung,lane-count = <4>; samsung,lane-count = <4>;
......
...@@ -236,12 +236,10 @@ &dp { ...@@ -236,12 +236,10 @@ &dp {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>; pinctrl-0 = <&dp_hpd>;
samsung,color-space = <0>; samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>; samsung,color-depth = <1>;
samsung,link-rate = <0x0a>; samsung,link-rate = <0x0a>;
samsung,lane-count = <2>; samsung,lane-count = <2>;
samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
ports { ports {
port@0 { port@0 {
......
...@@ -74,12 +74,10 @@ &dp { ...@@ -74,12 +74,10 @@ &dp {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&dp_hpd_gpio>; pinctrl-0 = <&dp_hpd_gpio>;
samsung,color-space = <0>; samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>; samsung,color-depth = <1>;
samsung,link-rate = <0x0a>; samsung,link-rate = <0x0a>;
samsung,lane-count = <1>; samsung,lane-count = <1>;
samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>; hpd-gpios = <&gpc3 0 GPIO_ACTIVE_HIGH>;
}; };
&ehci { &ehci {
......
...@@ -148,12 +148,10 @@ &dp { ...@@ -148,12 +148,10 @@ &dp {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&dp_hpd_gpio>; pinctrl-0 = <&dp_hpd_gpio>;
samsung,color-space = <0>; samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>; samsung,color-depth = <1>;
samsung,link-rate = <0x06>; samsung,link-rate = <0x06>;
samsung,lane-count = <2>; samsung,lane-count = <2>;
samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
ports { ports {
port@0 { port@0 {
......
...@@ -93,8 +93,6 @@ &dp { ...@@ -93,8 +93,6 @@ &dp {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>; pinctrl-0 = <&dp_hpd>;
samsung,color-space = <0>; samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>; samsung,color-depth = <1>;
samsung,link-rate = <0x0a>; samsung,link-rate = <0x0a>;
samsung,lane-count = <4>; samsung,lane-count = <4>;
......
...@@ -148,8 +148,6 @@ &dp { ...@@ -148,8 +148,6 @@ &dp {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&dp_hpd_gpio>; pinctrl-0 = <&dp_hpd_gpio>;
samsung,color-space = <0>; samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>; samsung,color-depth = <1>;
samsung,link-rate = <0x0a>; samsung,link-rate = <0x0a>;
samsung,lane-count = <2>; samsung,lane-count = <2>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment