usb:hsotg:samsung: Remove platform dependency from s3c-hsotg

This code removes platform dependency from s3c-hsotg driver.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

arch/arm/mach-exynos/mach-nuri.c

@@ -44,6 +44,7 @@
 #include <plat/fb.h>
 #include <plat/sdhci.h>
 #include <plat/ehci.h>
+#include <linux/platform_data/s3c-hsotg.h>
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>

arch/arm/mach-exynos/mach-universal_c210.c

@@ -42,6 +42,7 @@
 #include <plat/fimc-core.h>
 #include <plat/camport.h>
 #include <plat/mipi_csis.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <mach/map.h>
 

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -61,7 +61,7 @@
 #include <plat/sdhci.h>
 #include <plat/gpio-cfg.h>
 #include <plat/s3c64xx-spi.h>
-#include <plat/udc-hs.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <plat/keypad.h>
 #include <plat/clock.h>

arch/arm/mach-s3c64xx/mach-smartq.c

@@ -33,7 +33,7 @@
 #include <plat/gpio-cfg.h>
 #include <plat/hwmon.h>
 #include <plat/regs-serial.h>
-#include <plat/udc-hs.h>
+#include <linux/platform_data/s3c-hsotg.h>
 #include <plat/usb-control.h>
 #include <plat/sdhci.h>
 #include <plat/ts.h>

arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -72,7 +72,7 @@
 #include <plat/keypad.h>
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
-#include <plat/udc-hs.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include "common.h"
 

arch/arm/mach-s5pv210/mach-goni.c

@@ -49,6 +49,7 @@
 #include <plat/mfc.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/camport.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <media/v4l2-mediabus.h>
 #include <media/s5p_fimc.h>

arch/arm/plat-samsung/devs.c

@@ -57,7 +57,7 @@
 #include <plat/sdhci.h>
 #include <plat/ts.h>
 #include <plat/udc.h>
-#include <plat/udc-hs.h>
+#include <linux/platform_data/s3c-hsotg.h>
 #include <plat/usb-control.h>
 #include <plat/usb-phy.h>
 #include <plat/regs-iic.h>

drivers/usb/gadget/s3c-hsotg.c

@@ -34,9 +34,9 @@
 #include <mach/map.h>
 
 #include <plat/regs-usb-hsotg-phy.h>
-#include <plat/regs-usb-hsotg.h>
+#include "s3c-hsotg.h"
+#include <linux/platform_data/s3c-hsotg.h>
 #include <mach/regs-sys.h>
-#include <plat/udc-hs.h>
 #include <plat/cpu.h>
 
 #define DMA_ADDR_INVALID (~((dma_addr_t)0))

arch/arm/plat-samsung/include/plat/udc-hs.h → include/linux/platform_data/s3c-hsotg.h

-/* arch/arm/plat-s3c/include/plat/udc-hs.h
+/* include/linux/platform_data/s3c-hsotg.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
@@ -25,7 +25,8 @@ enum s3c_hsotg_dmamode {
  */
 struct s3c_hsotg_plat {
 	enum s3c_hsotg_dmamode	dma;
-	unsigned int		is_osc : 1;
+	unsigned int		is_osc:1;
+	int                     phy_type;
 
 	int (*phy_init)(struct platform_device *pdev, int type);
 	int (*phy_exit)(struct platform_device *pdev, int type);