Merge flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5

into flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5-rmk

arch/arm/common/sa1111-pcibuf.c

@@ -54,7 +54,7 @@ struct safe_buffer {
 	dma_addr_t	safe_dma_addr;
 };
 
-LIST_HEAD(safe_buffers);
+static LIST_HEAD(safe_buffers);
 
 
 #define SIZE_SMALL	1024

arch/arm/common/sa1111.c

@@ -218,7 +218,7 @@ static void sa1111_unmask_lowirq(unsigned int irq)
  * be triggered.  In fact, its very difficult, if not impossible to get
  * INTSET to re-trigger the interrupt.
  */
-static void sa1111_rerun_lowirq(unsigned int irq)
+static int sa1111_retrigger_lowirq(unsigned int irq)
 {
 	unsigned int mask = SA1111_IRQMASK_LO(irq);
 	int i;
@@ -233,6 +233,7 @@ static void sa1111_rerun_lowirq(unsigned int irq)
 	if (i == 8)
 		printk(KERN_ERR "Danger Will Robinson: failed to "
 			"re-trigger IRQ%d\n", irq);
+	return i == 8 ? -1 : 0;
 }
 
 static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
@@ -270,7 +271,7 @@ static struct irqchip sa1111_low_chip = {
 	.ack		= sa1111_ack_irq,
 	.mask		= sa1111_mask_lowirq,
 	.unmask		= sa1111_unmask_lowirq,
-	.rerun		= sa1111_rerun_lowirq,
+	.retrigger	= sa1111_retrigger_lowirq,
 	.type		= sa1111_type_lowirq,
 	.wake		= sa1111_wake_lowirq,
 };
@@ -292,7 +293,7 @@ static void sa1111_unmask_highirq(unsigned int irq)
  * be triggered.  In fact, its very difficult, if not impossible to get
  * INTSET to re-trigger the interrupt.
  */
-static void sa1111_rerun_highirq(unsigned int irq)
+static int sa1111_retrigger_highirq(unsigned int irq)
 {
 	unsigned int mask = SA1111_IRQMASK_HI(irq);
 	int i;
@@ -307,6 +308,7 @@ static void sa1111_rerun_highirq(unsigned int irq)
 	if (i == 8)
 		printk(KERN_ERR "Danger Will Robinson: failed to "
 			"re-trigger IRQ%d\n", irq);
+	return i == 8 ? -1 : 0;
 }
 
 static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
@@ -344,7 +346,7 @@ static struct irqchip sa1111_high_chip = {
 	.ack		= sa1111_ack_irq,
 	.mask		= sa1111_mask_highirq,
 	.unmask		= sa1111_unmask_highirq,
-	.rerun		= sa1111_rerun_highirq,
+	.retrigger	= sa1111_retrigger_highirq,
 	.type		= sa1111_type_highirq,
 	.wake		= sa1111_wake_highirq,
 };

arch/arm/def-configs/epxa10db

 #
-# Automatically generated by make menuconfig: don't edit
+# Automatically generated make config: don't edit
 #
 CONFIG_ARM=y
-# CONFIG_EISA is not set
-# CONFIG_SBUS is not set
-# CONFIG_MCA is not set
+CONFIG_MMU=y
+CONFIG_SWAP=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_GENERIC_BUST_SPINLOCK is not set
-# CONFIG_GENERIC_ISA_DMA is not set
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_OBSOLETE is not set
+
+#
+# General setup
+#
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
 
 #
 # Loadable module support
 #
 CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_KMOD is not set
 
 #
@@ -33,6 +37,7 @@ CONFIG_MODULES=y
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_CAMELOT=y
 # CONFIG_ARCH_FOOTBRIDGE is not set
@@ -46,106 +51,71 @@ CONFIG_ARCH_CAMELOT=y
 #
 # Archimedes/A5000 Implementations
 #
-# CONFIG_ARCH_ARC is not set
-# CONFIG_ARCH_A5K is not set
+
+#
+# Archimedes/A5000 Implementations (select only ONE)
+#
+
+#
+# CLPS711X/EP721X Implementations
+#
+
+#
+# Epxa10db
+#
+
+#
+# PLD hotswap support
+#
+CONFIG_PLD=y
+# CONFIG_PLD_HOTSWAP is not set
 
 #
 # Footbridge Implementations
 #
-# CONFIG_ARCH_CATS is not set
-# CONFIG_ARCH_PERSONAL_SERVER is not set
-# CONFIG_ARCH_EBSA285_ADDIN is not set
-# CONFIG_ARCH_EBSA285_HOST is not set
-# CONFIG_ARCH_NETWINDER is not set
+
+#
+# IOP310 Implementation Options
+#
+
+#
+# IOP310 Chipset Features
+#
+
+#
+# Intel PXA250/210 Implementations
+#
 
 #
 # SA11x0 Implementations
 #
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_ASSABET_NEPONSET is not set
-# CONFIG_SA1100_ADSBITSY is not set
-# CONFIG_SA1100_BRUTUS is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
-# CONFIG_SA1100_H3XXX is not set
-# CONFIG_SA1100_EXTENEX1 is not set
-# CONFIG_SA1100_FLEXANET is not set
-# CONFIG_SA1100_FREEBIRD is not set
-# CONFIG_SA1100_GRAPHICSCLIENT is not set
-# CONFIG_SA1100_GRAPHICSMASTER is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HUW_WEBPANEL is not set
-# CONFIG_SA1100_ITSY is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_NANOENGINE is not set
-# CONFIG_SA1100_OMNIMETER is not set
-# CONFIG_SA1100_PANGOLIN is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_PT_SYSTEM3 is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SHERMAN is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_PFS168 is not set
-# CONFIG_SA1100_VICTOR is not set
-# CONFIG_SA1100_XP860 is not set
-# CONFIG_SA1100_YOPY is not set
-# CONFIG_SA1100_USB is not set
-# CONFIG_SA1100_USB_NETLINK is not set
-# CONFIG_SA1100_USB_CHAR is not set
-# CONFIG_H3600_SLEEVE is not set
 
 #
-# CLPS711X/EP721X Implementations
+# Processor Type
 #
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CLEP7312 is not set
-# CONFIG_ARCH_EDB7211 is not set
-# CONFIG_ARCH_P720T is not set
-# CONFIG_ARCH_FORTUNET is not set
-# CONFIG_ARCH_EP7211 is not set
-# CONFIG_ARCH_EP7212 is not set
-# CONFIG_ARCH_ACORN is not set
-# CONFIG_FOOTBRIDGE is not set
-# CONFIG_FOOTBRIDGE_HOST is not set
-# CONFIG_FOOTBRIDGE_ADDIN is not set
 CONFIG_CPU_32=y
-# CONFIG_CPU_26 is not set
-# CONFIG_CPU_32v3 is not set
-CONFIG_CPU_32v4=y
-# CONFIG_CPU_ARM610 is not set
-# CONFIG_CPU_ARM710 is not set
-# CONFIG_CPU_ARM720T is not set
-# CONFIG_CPU_ARM920T is not set
 CONFIG_CPU_ARM922T=y
-CONFIG_CPU_ARM922_CPU_IDLE=y
-CONFIG_CPU_ARM922_I_CACHE_ON=y
-CONFIG_CPU_ARM922_D_CACHE_ON=y
-# CONFIG_CPU_ARM922_WRITETHROUGH is not set
-# CONFIG_CPU_ARM926T is not set
-# CONFIG_CPU_ARM1020 is not set
-# CONFIG_CPU_SA110 is not set
-# CONFIG_CPU_SA1100 is not set
-# CONFIG_XSCALE_PMU is not set
+CONFIG_CPU_32v4=y
+
+#
+# Processor Features
+#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 
 #
 # General setup
 #
-# CONFIG_PCI is not set
-# CONFIG_ISA is not set
-# CONFIG_ISA_DMA is not set
-# CONFIG_FIQ is not set
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
 # CONFIG_HOTPLUG is not set
-# CONFIG_PCMCIA is not set
-CONFIG_NET=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+
+#
+# At least one math emulation must be selected
+#
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_FASTFPE is not set
 CONFIG_KCORE_ELF=y
@@ -154,7 +124,7 @@ CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_PM is not set
-# CONFIG_APM is not set
+# CONFIG_PREEMPT is not set
 # CONFIG_ARTHUR is not set
 CONFIG_CMDLINE="mem=32M console=ttyUA0,38400 root=/dev/mtdblock0 rw"
 CONFIG_ALIGNMENT_TRAP=y
@@ -171,9 +141,14 @@ CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=0
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_BOOTLDR_PARTS=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
@@ -192,9 +167,6 @@ CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
 # CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_AMDSTD is not set
-# CONFIG_MTD_SHARP is not set
-# CONFIG_MTD_JEDEC is not set
 
 #
 # Mapping drivers for chip access
@@ -202,24 +174,23 @@ CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_NORA is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_CDB89712 is not set
-# CONFIG_MTD_SA1100 is not set
-# CONFIG_MTD_DC21285 is not set
-# CONFIG_MTD_IQ80310 is not set
 CONFIG_MTD_EPXA10DB=y
-# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_UCLINUX is not set
 
 #
 # Self-contained MTD device drivers
 #
-# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
 # CONFIG_MTD_DOC1000 is not set
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOCPROBE is not set
 
 #
 # NAND Flash Device Drivers
@@ -227,21 +198,14 @@ CONFIG_MTD_EPXA10DB=y
 # CONFIG_MTD_NAND is not set
 
 #
-# Plug and Play configuration
+# Plug and Play support
 #
 # CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
 
 #
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
@@ -252,23 +216,22 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # Multi-device support (RAID and LVM)
 #
 # CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK is not set
+# CONFIG_NETLINK_DEV is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_FILTER is not set
 CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -278,19 +241,26 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
 # CONFIG_INET_ECN is not set
 # CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_XFRM_USER is not set
 # CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IPV6_SCTP__=y
+# CONFIG_IP_SCTP is not set
 # CONFIG_ATM is not set
 # CONFIG_VLAN_8021Q is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
+# CONFIG_LLC is not set
 # CONFIG_DECNET is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_LLC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -303,54 +273,27 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_SCHED is not set
 
 #
-# Network device support
+# Network testing
 #
+# CONFIG_NET_PKTGEN is not set
 CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
 
 #
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-# CONFIG_ARM_AM79C961A is not set
 CONFIG_ETHER00=m
-# CONFIG_SUNLANCE is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNLANCE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
 #
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
 CONFIG_PPP_SYNC_TTY=y
 # CONFIG_PPP_DEFLATE is not set
@@ -364,11 +307,8 @@ CONFIG_PPP_SYNC_TTY=y
 # CONFIG_NET_RADIO is not set
 
 #
-# Token Ring devices
+# Token Ring devices (depends on LLC=y)
 #
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
 # CONFIG_SHAPER is not set
 
 #
@@ -377,21 +317,19 @@ CONFIG_PPP_SYNC_TTY=y
 # CONFIG_WAN is not set
 
 #
-# Amateur Radio support
+# IrDA (infrared) support
 #
-# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
 
 #
-# IrDA (infrared) support
+# Amateur Radio support
 #
-# CONFIG_IRDA is not set
+# CONFIG_HAMRADIO is not set
 
 #
-# ATA/IDE/MFM/RLL support
+# ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI support
@@ -402,59 +340,48 @@ CONFIG_PPP_SYNC_TTY=y
 # I2O device support
 #
 # CONFIG_I2O is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
 
 #
 # ISDN subsystem
 #
-# CONFIG_ISDN is not set
+# CONFIG_ISDN_BOOL is not set
 
 #
-# Input core support
+# Input device support
 #
 # CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+
+#
+# Userland interfaces
+#
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+# CONFIG_SERIO is not set
+
+#
+# Input Device Drivers
+#
 
 #
 # Character devices
 #
-# CONFIG_VT is not set
-# CONFIG_SERIAL is not set
-# CONFIG_SERIAL_EXTENDED is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_ANAKIN is not set
-# CONFIG_SERIAL_ANAKIN_CONSOLE is not set
-# CONFIG_SERIAL_AMBA is not set
-# CONFIG_SERIAL_AMBA_CONSOLE is not set
-# CONFIG_SERIAL_CLPS711X is not set
-# CONFIG_SERIAL_CLPS711X_CONSOLE is not set
-# CONFIG_SERIAL_21285 is not set
-# CONFIG_SERIAL_21285_OLD is not set
-# CONFIG_SERIAL_21285_CONSOLE is not set
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_DZ is not set
 CONFIG_SERIAL_UART00=y
 CONFIG_SERIAL_UART00_CONSOLE=y
-# CONFIG_SERIAL_SA1100 is not set
-# CONFIG_SERIAL_SA1100_CONSOLE is not set
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SERIAL_8250_CONSOLE is not set
-# CONFIG_ATOMWIDE_SERIAL is not set
-# CONFIG_DUALSP_SERIAL is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_SHARE_IRQ is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -465,34 +392,37 @@ CONFIG_UNIX98_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# I2C Hardware Sensors Mainboard support
+#
+
+#
+# I2C Hardware Sensors Chip support
+#
+
 #
 # L3 serial bus support
 #
 # CONFIG_L3 is not set
-# CONFIG_L3_ALGOBIT is not set
-# CONFIG_L3_BIT_SA1100_GPIO is not set
-# CONFIG_L3_SA1111 is not set
-# CONFIG_BIT_SA1100_GPIO is not set
 
 #
 # Mice
 #
 # CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
+# CONFIG_QIC02_TAPE is not set
 
 #
-# Joysticks
+# IPMI
 #
-# CONFIG_INPUT_GAMEPORT is not set
-# CONFIG_QIC02_TAPE is not set
+# CONFIG_IPMI_HANDLER is not set
 
 #
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -503,6 +433,7 @@ CONFIG_UNIX98_PTY_COUNT=256
 # CONFIG_FTAPE is not set
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
 
 #
 # Multimedia devices
@@ -516,50 +447,39 @@ CONFIG_UNIX98_PTY_COUNT=256
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
+# CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
-# CONFIG_JBD_DEBUG is not set
 # CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_NAND is not set
 # CONFIG_CRAMFS is not set
 CONFIG_TMPFS=y
 CONFIG_RAMFS=y
 # CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
 # CONFIG_HPFS_FS is not set
 CONFIG_PROC_FS=y
 # CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
 CONFIG_DEVPTS_FS=y
 # CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
 CONFIG_ROMFS_FS=y
 CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_XFS_FS is not set
 
 #
 # Network File Systems
@@ -568,107 +488,52 @@ CONFIG_EXT2_FS=y
 # CONFIG_INTERMEZZO_FS is not set
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_ROOT_NFS is not set
 # CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_GSS is not set
 CONFIG_LOCKD=y
+# CONFIG_EXPORTFS is not set
+# CONFIG_CIFS is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-# CONFIG_ZLIB_FS_INFLATE is not set
+# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SMB_NLS is not set
-# CONFIG_NLS is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Misc devices
+#
 
 #
 # Multimedia Capabilities Port drivers
 #
 # CONFIG_MCP is not set
-# CONFIG_MCP_SA1100 is not set
-# CONFIG_MCP_UCB1200 is not set
-# CONFIG_MCP_UCB1200_AUDIO is not set
-# CONFIG_MCP_UCB1200_TS is not set
+
+#
+# Console Switches
+#
+# CONFIG_SWITCHES is not set
 
 #
 # USB support
 #
-# CONFIG_USB is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_UHCI is not set
-# CONFIG_USB_UHCI_ALT is not set
-# CONFIG_USB_OHCI is not set
-# CONFIG_USB_OHCI_SA1111 is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_DC2XX is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDCETHER is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_AUERSWALD is not set
 
 #
 # Bluetooth support
@@ -681,19 +546,21 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_NO_PGT_CACHE is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_WAITQ is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_DC21285_PORT is not set
-# CONFIG_DEBUG_CLPS711X_UART2 is not set
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 # CONFIG_CRC32 is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

arch/arm/kernel/irq.c

@@ -29,6 +29,7 @@
 #include <linux/init.h>
 #include <linux/seq_file.h>
 #include <linux/errno.h>
+#include <linux/list.h>
 
 #include <asm/irq.h>
 #include <asm/system.h>
@@ -45,6 +46,7 @@
 
 static volatile unsigned long irq_err_count;
 static spinlock_t irq_controller_lock;
+static LIST_HEAD(irq_pending);
 
 struct irqdesc irq_desc[NR_IRQS];
 void (*init_arch_irq)(void) __initdata = NULL;
@@ -71,7 +73,8 @@ static struct irqchip bad_chip = {
 static struct irqdesc bad_irq_desc = {
 	.chip		= &bad_chip,
 	.handle		= do_bad_IRQ,
-	.depth	= 1,
+	.pend		= LIST_HEAD_INIT(bad_irq_desc.pend),
+	.disable_depth	= 1,
 };
 
 /**
@@ -90,6 +93,7 @@ void disable_irq(unsigned int irq)
 
 	spin_lock_irqsave(&irq_controller_lock, flags);
 	desc->disable_depth++;
+	list_del_init(&desc->pend);
 	spin_unlock_irqrestore(&irq_controller_lock, flags);
 }
 
@@ -122,9 +126,11 @@ void enable_irq(unsigned int irq)
 		 * from here since the caller might be in an
 		 * interrupt-protected region.
 		 */
-		if (desc->pending) {
+		if (desc->pending && list_empty(&desc->pend)) {
 			desc->pending = 0;
-			desc->chip->rerun(irq);
+			if (!desc->chip->retrigger ||
+			    desc->chip->retrigger(irq))
+				list_add(&desc->pend, &irq_pending);
 		}
 	}
 	spin_unlock_irqrestore(&irq_controller_lock, flags);
@@ -346,6 +352,40 @@ do_level_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
 	}
 }
 
+static void do_pending_irqs(struct pt_regs *regs)
+{
+	struct list_head head, *l, *n;
+
+	do {
+		struct irqdesc *desc;
+
+		/*
+		 * First, take the pending interrupts off the list.
+		 * The act of calling the handlers may add some IRQs
+		 * back onto the list.
+		 */
+		head = irq_pending;
+		INIT_LIST_HEAD(&irq_pending);
+		head.next->prev = &head;
+		head.prev->next = &head;
+
+		/*
+		 * Now run each entry.  We must delete it from our
+		 * list before calling the handler.
+		 */
+		list_for_each_safe(l, n, &head) {
+			desc = list_entry(l, struct irqdesc, pend);
+			list_del_init(&desc->pend);
+			desc->handle(desc - irq_desc, desc, regs);
+		}
+
+		/*
+		 * The list must be empty.
+		 */
+		BUG_ON(!list_empty(&head));
+	} while (!list_empty(&irq_pending));
+}
+
 /*
  * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
  * come via this function.  Instead, they should provide their
@@ -365,6 +405,13 @@ asmlinkage void asm_do_IRQ(int irq, struct pt_regs *regs)
 	irq_enter();
 	spin_lock(&irq_controller_lock);
 	desc->handle(irq, desc, regs);
+
+	/*
+	 * Now re-run any pending interrupts.
+	 */
+	if (!list_empty(&irq_pending))
+		do_pending_irqs(regs);
+
 	spin_unlock(&irq_controller_lock);
 	irq_exit();
 }
@@ -740,8 +787,10 @@ void __init init_IRQ(void)
 	extern void init_dma(void);
 	int irq;
 
-	for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++)
+	for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) {
 		*desc = bad_irq_desc;
+		INIT_LIST_HEAD(&desc->pend);
+	}
 
 	init_arch_irq();
 	init_dma();

arch/arm/kernel/traps.c

@@ -52,9 +52,14 @@ static const char *handler[]= { "prefetch abort", "data abort", "address excepti
 
 void dump_backtrace_entry(unsigned long where, unsigned long from)
 {
+#ifdef CONFIG_KALLSYMS
+	printk("[<%08lx>] ", where);
+	print_symbol("(%s) ", where);
+	printk("from [<%08lx>] ", from);
+	print_symbol("(%s)\n", from);
+#else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
-	print_symbol("  %s", where);
-	printk("\n");
+#endif
 }
 
 /*
@@ -503,11 +508,11 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
 	die_if_kernel("unknown data abort code", regs, instr);
 }
 
-void __bug(const char *file, int line, void *data)
+volatile void __bug(const char *file, int line, void *data)
 {
 	printk(KERN_CRIT"kernel BUG at %s:%d!", file, line);
 	if (data)
-		printk(KERN_CRIT" - extra data = %p", data);
+		printk(" - extra data = %p", data);
 	printk("\n");
 	*(int *)0 = 0;
 }

arch/arm/mach-epxa10db/irq.c

@@ -19,6 +19,9 @@
  */
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/stddef.h>
+#include <linux/timer.h>
+#include <linux/list.h>
 #include <asm/io.h>
 #include <asm/hardware.h>
 #include <asm/irq.h>

arch/arm/mach-footbridge/irq.c

@@ -15,6 +15,7 @@
  *   16-Mar-1999 RMK	Added autodetect of ISA PICs
  */
 #include <linux/ioport.h>
+#include <linux/list.h>
 #include <linux/init.h>
 
 #include <asm/mach/irq.h>

arch/arm/mach-footbridge/isa-irq.c

@@ -16,6 +16,7 @@
  */
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
+#include <linux/list.h>
 #include <linux/init.h>
 
 #include <asm/mach/irq.h>

arch/arm/mach-iop310/iop310-irq.c

@@ -15,6 +15,7 @@
  */
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/list.h>
 
 #include <asm/mach/irq.h>
 #include <asm/irq.h>

arch/arm/mach-iop310/iop310-pci.c

@@ -360,6 +360,8 @@ int iop310_setup(int nr, struct pci_sys_data *sys)
 	if (!res)
 		panic("PCI: unable to alloc resources");
 
+	memset(res, 0, sizeof(struct resource) * 2);
+
 	switch (nr) {
 	case 0:
 		res[0].start = IOP310_PCIPRI_LOWER_IO + 0x6e000000;

arch/arm/mach-iop310/iq80310-irq.c

@@ -15,6 +15,7 @@
  *     Fixes for various revision boards - DS
  */
 #include <linux/init.h>
+#include <linux/list.h>
 
 #include <asm/irq.h>
 #include <asm/mach/irq.h>

arch/arm/mach-iop310/xs80200-irq.c

@@ -11,6 +11,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/init.h>
+#include <linux/list.h>
 
 #include <asm/mach/irq.h>
 #include <asm/irq.h>

arch/arm/mach-pxa/irq.c

@@ -85,19 +85,6 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 	return 0;
 }
 
-/*
- * Since we can't actually physically mask edge triggered interrupts
- * without the risk of missing transitions, we therefore logically mask
- * them and defer their processing through tis function.
- */
-
-static void pxa_manual_rerun(unsigned int irq)
-{
-	struct pt_regs regs;
-	memset(&regs, 0, sizeof(regs));
-	irq_desc[irq].handle(irq, &irq_desc[irq], &regs);
-}
-
 /*
  * GPIO IRQs must be acknoledged.  This is for GPIO 0 and 1.
  */
@@ -111,7 +98,6 @@ static struct irqchip pxa_low_gpio_chip = {
 	.ack		= pxa_ack_low_gpio,
 	.mask		= pxa_mask_irq,
 	.unmask		= pxa_unmask_irq,
-	.rerun		= pxa_manual_rerun,
 	.type		= pxa_gpio_irq_type,
 };
 

arch/arm/mach-rpc/irq.c

 #include <linux/init.h>
+#include <linux/list.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/iomd.h>

arch/arm/mach-sa1100/irq.c

@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/ptrace.h>
+#include <linux/device.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -24,20 +25,12 @@
 /*
  * SA1100 GPIO edge detection for IRQs:
  * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * This must be called *before* the appropriate IRQ is registered.
  * Use this instead of directly setting GRER/GFER.
  */
 static int GPIO_IRQ_rising_edge;
 static int GPIO_IRQ_falling_edge;
 static int GPIO_IRQ_mask = (1 << 11) - 1;
 
-static void sa1100_manual_rerun(unsigned int irq)
-{
-	struct pt_regs regs;
-	memset(&regs, 0, sizeof(regs));
-	irq_desc[irq].handle(irq, &irq_desc[irq], &regs);
-}
-
 /*
  * To get the GPIO number from an IRQ number
  */
@@ -105,7 +98,6 @@ static struct irqchip sa1100_low_gpio_chip = {
 	.ack		= sa1100_low_gpio_ack,
 	.mask		= sa1100_low_gpio_mask,
 	.unmask		= sa1100_low_gpio_unmask,
-	.rerun		= sa1100_manual_rerun,
 	.type		= sa1100_gpio_type,
 	.wake		= sa1100_low_gpio_wake,
 };
@@ -189,7 +181,6 @@ static struct irqchip sa1100_high_gpio_chip = {
 	.ack		= sa1100_high_gpio_ack,
 	.mask		= sa1100_high_gpio_mask,
 	.unmask		= sa1100_high_gpio_unmask,
-	.rerun		= sa1100_manual_rerun,
 	.type		= sa1100_gpio_type,
 	.wake		= sa1100_high_gpio_wake,
 };
@@ -212,7 +203,6 @@ static struct irqchip sa1100_normal_chip = {
 	.ack		= sa1100_mask_irq,
 	.mask		= sa1100_mask_irq,
 	.unmask		= sa1100_unmask_irq,
-	/* rerun should never be called */
 };
 
 static struct resource irq_resource = {
@@ -267,10 +257,4 @@ void __init sa1100_init_irq(void)
 	 */
 	set_irq_chip(IRQ_GPIO11_27, &sa1100_normal_chip);
 	set_irq_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler);
-
-	/*
-	 * We generally don't want the LCD IRQ being
-	 * enabled as soon as we request it.
-	 */
-	set_irq_flags(IRQ_LCD, IRQF_VALID/* | IRQF_NOAUTOEN*/);
 }

arch/arm/mach-sa1100/xp860.c

@@ -15,9 +15,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
+#include <asm/hardware/sa1111.h>
 
 #include "generic.h"
-#include "sa1111.h"
 
 
 static void xp860_power_off(void)

arch/arm/mm/consistent.c

@@ -83,7 +83,7 @@ static void vm_region_dump(struct vm_region *head, char *fn)
 	struct vm_region *c;
 
 	printk("Consistent Allocation Map (%s):\n", fn);
-	list_for_each_entry(c, &head->list, vm_list) {
+	list_for_each_entry(c, &head->vm_list, vm_list) {
 		printk(" %p:  %08lx - %08lx   (0x%08x)\n", c,
 		       c->vm_start, c->vm_end, c->vm_end - c->vm_start);
 	}

arch/arm/mm/proc-xscale.S

@@ -678,7 +678,7 @@ __xscale_setup:
 	mcr	p15, 0, r0, c15, c1, 0		@ affects USR or SVC modes
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
 	bic	r0, r0, #0x0200			@ .... ..R. .... ....
-	bic	r0, r0, #0x0082			@ .... .... B... ..A.
+	bic	r0, r0, #0x0002			@ .... .... .... ..A.
 	orr	r0, r0, #0x0005			@ .... .... .... .C.M
 	orr	r0, r0, #0x3900			@ ..VI Z..S .... ....
 	mov	pc, lr

arch/arm/vmlinux-armv.lds.in

@@ -7,7 +7,11 @@
 	
 OUTPUT_ARCH(arm)
 ENTRY(stext)
+#ifndef __ARMEB__
 jiffies = jiffies_64;
+#else
+jiffies = jiffies_64 + 4;
+#endif
 SECTIONS
 {
 	. = TEXTADDR;

include/asm-arm/arch-iop310/serial.h

@@ -24,8 +24,8 @@
 
 #define STD_SERIAL_PORT_DEFNS			\
        /* UART CLK      PORT        IRQ        FLAGS        */			\
-	{ 0, BASE_BAUD, 0xfe810000, IRQ_UART2, STD_COM_FLAGS },  /* ttyS0 */	\
-	{ 0, BASE_BAUD, 0xfe800000, IRQ_UART1, STD_COM_FLAGS }  /* ttyS1 */
+	{ 0, BASE_BAUD, IQ80310_UART2, IRQ_UART2, STD_COM_FLAGS },  /* ttyS0 */	\
+	{ 0, BASE_BAUD, IQ80310_UART1, IRQ_UART1, STD_COM_FLAGS }  /* ttyS1 */
 
 #endif // CONFIG_ARCH_IQ80310
 

include/asm-arm/mach/irq.h

@@ -33,9 +33,12 @@ struct irqchip {
 	 */
 	void (*unmask)(unsigned int);
 	/*
-	 * Re-run the IRQ
+	 * Ask the hardware to re-trigger the IRQ.
+	 * Note: This method _must_ _not_ call the interrupt handler.
+	 * If you are unable to retrigger the interrupt, do not
+	 * provide a function, or if you do, return non-zero.
 	 */
-	void (*rerun)(unsigned int);
+	int (*retrigger)(unsigned int);
 	/*
 	 * Set the type of the IRQ.
 	 */
@@ -50,6 +53,7 @@ struct irqdesc {
 	irq_handler_t	handle;
 	struct irqchip	*chip;
 	struct irqaction *action;
+	struct list_head pend;
 	unsigned int	disable_depth;
 
 	unsigned int	triggered: 1;		/* IRQ has occurred	      */

include/asm-arm/proc-armv/processor.h

@@ -23,7 +23,7 @@
 #define KERNEL_STACK_SIZE	PAGE_SIZE
 
 #define INIT_EXTRA_THREAD_INFO						\
-	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_CLIENT) |	\
+	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
 			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\
 			  domain_val(DOMAIN_IO, DOMAIN_CLIENT)
 

include/asm-arm/proc-armv/system.h

@@ -14,9 +14,14 @@
 
 #define set_cr(x)					\
 	__asm__ __volatile__(				\
-	"mcr	p15, 0, %0, c1, c0	@ set CR"	\
+	"mcr	p15, 0, %0, c1, c0, 0	@ set CR"	\
 	: : "r" (x))
 
+#define get_cr(x)					\
+	__asm__ __volatile__(				\
+	"mrc	p15, 0, %0, c1, c0, 0	@ get CR"	\
+	: "=r" (x))
+
 #define CR_M	(1 << 0)	/* MMU enable				*/
 #define CR_A	(1 << 1)	/* Alignment abort enable		*/
 #define CR_C	(1 << 2)	/* Dcache enable			*/
@@ -24,9 +29,9 @@
 #define CR_P	(1 << 4)	/* 32-bit exception handler		*/
 #define CR_D	(1 << 5)	/* 32-bit data address range		*/
 #define CR_L	(1 << 6)	/* Implementation defined		*/
-#define CD_B	(1 << 7)	/* Big endian				*/
+#define CR_B	(1 << 7)	/* Big endian				*/
 #define CR_S	(1 << 8)	/* System MMU protection		*/
-#define CD_R	(1 << 9)	/* ROM MMU protection			*/
+#define CR_R	(1 << 9)	/* ROM MMU protection			*/
 #define CR_F	(1 << 10)	/* Implementation defined		*/
 #define CR_Z	(1 << 11)	/* Implementation defined		*/
 #define CR_I	(1 << 12)	/* Icache enable			*/