[PATCH] USB: EHCI support on MIPS

 From Darwin Rambo, <drambo@broadcom.com>

   These get rid of 8 and 16 byte PCI access, which don't work
   on some MIPS platforms.

drivers/usb/host/ehci-dbg.c

@@ -63,6 +63,7 @@ static void dbg_hcs_params (struct ehci_hcd *ehci, char *label)
 
 		buf[0] = 0;
 		for (i = 0; i < HCS_N_PORTS (params); i++) {
+			// FIXME MIPS won't readb() ...
 			byte = readb (&ehci->caps->portroute[(i>>1)]);
 			sprintf(tmp, "%d ", 
 				((i & 0x1) ? ((byte)&0xf) : ((byte>>4)&0xf)));
@@ -591,7 +592,7 @@ show_registers (struct class_device *class_dev, char *buf)
 	spin_lock_irqsave (&ehci->lock, flags);
 
 	/* Capability Registers */
-	i = readw (&ehci->caps->hci_version);
+	i = HC_VERSION(readl (&ehci->caps->hc_capbase));
 	temp = snprintf (next, size,
 		"PCI device %s\nEHCI %x.%02x, hcd state %d (driver " DRIVER_VERSION ")\n",
 		pci_name(hcd->pdev),

drivers/usb/host/ehci-hcd.c

@@ -325,7 +325,7 @@ static int ehci_hc_reset (struct usb_hcd *hcd)
 
 	ehci->caps = (struct ehci_caps *) hcd->regs;
 	ehci->regs = (struct ehci_regs *) (hcd->regs + 
-				readb (&ehci->caps->length));
+				HC_LENGTH (readl (&ehci->caps->hc_capbase)));
 	dbg_hcs_params (ehci, "reset");
 	dbg_hcc_params (ehci, "reset");
 
@@ -489,7 +489,7 @@ static int ehci_start (struct usb_hcd *hcd)
 
         /* PCI Serial Bus Release Number is at 0x60 offset */
 	pci_read_config_byte (hcd->pdev, 0x60, &tempbyte);
-	temp = readw (&ehci->caps->hci_version);
+	temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
 	ehci_info (ehci,
 		"USB %x.%x enabled, EHCI %x.%02x, driver %s\n",
 		((tempbyte & 0xf0)>>4), (tempbyte & 0x0f),

drivers/usb/host/ehci.h

@@ -153,9 +153,12 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
 
 /* Section 2.2 Host Controller Capability Registers */
 struct ehci_caps {
-	u8		length;		/* CAPLENGTH - size of this struct */
-	u8		reserved;       /* offset 0x1 */
-	u16		hci_version;    /* HCIVERSION - offset 0x2 */
+	/* these fields are specified as 8 and 16 bit registers,
+	 * but some hosts can't perform 8 or 16 bit PCI accesses.
+	 */
+	u32	hc_capbase;
+#define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
+#define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
 	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
 #define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
 #define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */