Commit 12d7ce18 authored by Frank Schaefer's avatar Frank Schaefer Committed by Mauro Carvalho Chehab

[media] em28xx-i2c: replace printk() with the corresponding em28xx macros

Reduces the number of characters/lines, unifies the code and improves readability.
Signed-off-by: default avatarFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent d7a80eaa
......@@ -394,7 +394,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
/* Check if board has eeprom */
err = i2c_master_recv(&dev->i2c_client, &buf, 0);
if (err < 0) {
em28xx_errdev("board has no eeprom\n");
em28xx_info("board has no eeprom\n");
memset(eedata, 0, len);
return -ENODEV;
}
......@@ -403,8 +403,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
err = i2c_master_send(&dev->i2c_client, &buf, 1);
if (err != 1) {
printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
dev->name, err);
em28xx_errdev("failed to read eeprom (err=%d)\n", err);
return err;
}
......@@ -421,9 +420,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
if (block !=
(err = i2c_master_recv(&dev->i2c_client, p, block))) {
printk(KERN_WARNING
"%s: i2c eeprom read error (err=%d)\n",
dev->name, err);
em28xx_errdev("i2c eeprom read error (err=%d)\n", err);
return err;
}
size -= block;
......@@ -431,7 +428,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
}
for (i = 0; i < len; i++) {
if (0 == (i % 16))
printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i);
em28xx_info("i2c eeprom %02x:", i);
printk(" %02x", eedata[i]);
if (15 == (i % 16))
printk("\n");
......@@ -440,51 +437,47 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
if (em_eeprom->id == 0x9567eb1a)
dev->hash = em28xx_hash_mem(eedata, len, 32);
printk(KERN_INFO "%s: EEPROM ID= 0x%08x, EEPROM hash = 0x%08lx\n",
dev->name, em_eeprom->id, dev->hash);
em28xx_info("EEPROM ID = 0x%08x, EEPROM hash = 0x%08lx\n",
em_eeprom->id, dev->hash);
printk(KERN_INFO "%s: EEPROM info:\n", dev->name);
em28xx_info("EEPROM info:\n");
switch (em_eeprom->chip_conf >> 4 & 0x3) {
case 0:
printk(KERN_INFO "%s:\tNo audio on board.\n", dev->name);
em28xx_info("\tNo audio on board.\n");
break;
case 1:
printk(KERN_INFO "%s:\tAC97 audio (5 sample rates)\n",
dev->name);
em28xx_info("\tAC97 audio (5 sample rates)\n");
break;
case 2:
printk(KERN_INFO "%s:\tI2S audio, sample rate=32k\n",
dev->name);
em28xx_info("\tI2S audio, sample rate=32k\n");
break;
case 3:
printk(KERN_INFO "%s:\tI2S audio, 3 sample rates\n",
dev->name);
em28xx_info("\tI2S audio, 3 sample rates\n");
break;
}
if (em_eeprom->chip_conf & 1 << 3)
printk(KERN_INFO "%s:\tUSB Remote wakeup capable\n", dev->name);
em28xx_info("\tUSB Remote wakeup capable\n");
if (em_eeprom->chip_conf & 1 << 2)
printk(KERN_INFO "%s:\tUSB Self power capable\n", dev->name);
em28xx_info("\tUSB Self power capable\n");
switch (em_eeprom->chip_conf & 0x3) {
case 0:
printk(KERN_INFO "%s:\t500mA max power\n", dev->name);
em28xx_info("\t500mA max power\n");
break;
case 1:
printk(KERN_INFO "%s:\t400mA max power\n", dev->name);
em28xx_info("\t400mA max power\n");
break;
case 2:
printk(KERN_INFO "%s:\t300mA max power\n", dev->name);
em28xx_info("\t300mA max power\n");
break;
case 3:
printk(KERN_INFO "%s:\t200mA max power\n", dev->name);
em28xx_info("\t200mA max power\n");
break;
}
printk(KERN_INFO "%s:\tTable at 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
dev->name,
em28xx_info("\tTable at offset 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
em_eeprom->string_idx_table,
em_eeprom->string1,
em_eeprom->string2,
......@@ -565,8 +558,8 @@ void em28xx_do_i2c_scan(struct em28xx *dev)
if (rc < 0)
continue;
i2c_devicelist[i] = i;
printk(KERN_INFO "%s: found i2c device @ 0x%x [%s]\n",
dev->name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
em28xx_info("found i2c device @ 0x%x [%s]\n",
i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
}
dev->i2c_hash = em28xx_hash_mem(i2c_devicelist,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment