Merge tags 'renesas-pinmux-for-v3.11' and 'renesas-soc-for-v3.11' into cleanup

This merge has been performed in order to provide the pre-requisites for
a cleanup patch for the lager board to annotate various structures
with __initdata.

Conflicts:
	arch/arm/mach-shmobile/Kconfig
	arch/arm/mach-shmobile/include/mach/r8a7778.h
	arch/arm/mach-shmobile/setup-r8a7778.c

arch/arm/Kconfig

@@ -645,7 +645,7 @@ config ARCH_SHMOBILE
 	select MULTI_IRQ_HANDLER
 	select NEED_MACH_MEMORY_H
 	select NO_IOPORT
-	select PINCTRL if ARCH_WANT_OPTIONAL_GPIOLIB
+	select PINCTRL
 	select PM_GENERIC_DOMAINS if PM
 	select SPARSE_IRQ
 	help

arch/arm/mach-shmobile/Kconfig

@@ -36,7 +36,8 @@ config ARCH_R8A7740
 	select RENESAS_INTC_IRQPIN
 
 config ARCH_R8A7778
-	bool "R-Car M1 (R8A77780)"
+	bool "R-Car M1A (R8A77781)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select CPU_V7
 	select SH_CLK_CPG
 	select ARM_GIC
@@ -169,6 +170,8 @@ config MACH_KZM9D
 config MACH_KZM9G
 	bool "KZM-A9-GT board"
 	depends on ARCH_SH73A0
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD

arch/arm/mach-shmobile/board-ap4evb.c

@@ -1026,10 +1026,8 @@ static void __init hdmi_init_pm_clock(void)
 
 /* TouchScreen */
 #ifdef CONFIG_AP4EVB_QHD
-# define GPIO_TSC_IRQ	GPIO_FN_IRQ28_123
 # define GPIO_TSC_PORT	123
 #else /* WVGA */
-# define GPIO_TSC_IRQ	GPIO_FN_IRQ7_40
 # define GPIO_TSC_PORT	40
 #endif
 
@@ -1037,22 +1035,12 @@ static void __init hdmi_init_pm_clock(void)
 #define IRQ7	evt2irq(0x02e0) /* IRQ7A */
 static int ts_get_pendown_state(void)
 {
-	int val;
-
-	gpio_free(GPIO_TSC_IRQ);
-
-	gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL);
-
-	val = gpio_get_value(GPIO_TSC_PORT);
-
-	gpio_request(GPIO_TSC_IRQ, NULL);
-
-	return !val;
+	return !gpio_get_value(GPIO_TSC_PORT);
 }
 
 static int ts_init(void)
 {
-	gpio_request(GPIO_TSC_IRQ, NULL);
+	gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL);
 
 	return 0;
 }
@@ -1086,11 +1074,42 @@ static struct i2c_board_info i2c1_devices[] = {
 
 
 static const struct pinctrl_map ap4evb_pinctrl_map[] = {
+	/* CEU */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+				  "ceu_clk_0", "ceu"),
+	/* FSIA (AK4643) */
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+				  "fsia_sclk_in", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+				  "fsia_data_in", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+				  "fsia_data_out", "fsia"),
+	/* FSIB (HDMI) */
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372",
+				  "fsib_mclk_in", "fsib"),
+	/* HDMI */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-sh7372",
+				  "hdmi", "hdmi"),
+	/* KEYSC */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc", "pfc-sh7372",
+				  "keysc_in04_0", "keysc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc", "pfc-sh7372",
+				  "keysc_out5", "keysc"),
+#ifndef CONFIG_AP4EVB_QHD
+	/* LCDC */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
+				  "lcd_data18", "lcd"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
+				  "lcd_sync", "lcd"),
+#endif
 	/* MMCIF */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
 				  "mmc0_data8_0", "mmc0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
 				  "mmc0_ctrl_0", "mmc0"),
+	/* SCIFA0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372",
+				  "scifa0_data", "scifa0"),
 	/* SDHI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
 				  "sdhi0_data4", "sdhi0"),
@@ -1105,6 +1124,26 @@ static const struct pinctrl_map ap4evb_pinctrl_map[] = {
 				  "sdhi1_data4", "sdhi1"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
 				  "sdhi1_ctrl", "sdhi1"),
+	/* SMSC911X */
+	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
+				  "bsc_cs5a", "bsc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
+				  "intc_irq6_0", "intc"),
+	/* TSC2007 */
+#ifdef CONFIG_AP4EVB_QHD
+	PIN_MAP_MUX_GROUP_DEFAULT("1-0048", "pfc-sh7372",
+				  "intc_irq28_0", "intc"),
+#else /* WVGA */
+	PIN_MAP_MUX_GROUP_DEFAULT("1-0048", "pfc-sh7372",
+				  "intc_irq7_0", "intc"),
+#endif
+	/* USBHS1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372",
+				  "usb1_vbus", "usb1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372",
+				  "usb1_otg_id_0", "usb1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372",
+				  "usb1_otg_ctrl_0", "usb1"),
 };
 
 #define GPIO_PORT9CR	IOMEM(0xE6051009)
@@ -1137,36 +1176,16 @@ static void __init ap4evb_init(void)
 				  ARRAY_SIZE(ap4evb_pinctrl_map));
 	sh7372_pinmux_init();
 
-	/* enable SCIFA0 */
-	gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
-	gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
-
-	/* enable SMSC911X */
-	gpio_request(GPIO_FN_CS5A,	NULL);
-	gpio_request(GPIO_FN_IRQ6_39,	NULL);
-
 	/* enable Debug switch (S6) */
 	gpio_request_one(32, GPIOF_IN | GPIOF_EXPORT, NULL);
 	gpio_request_one(33, GPIOF_IN | GPIOF_EXPORT, NULL);
 	gpio_request_one(34, GPIOF_IN | GPIOF_EXPORT, NULL);
 	gpio_request_one(35, GPIOF_IN | GPIOF_EXPORT, NULL);
 
-	/* USB enable */
-	gpio_request(GPIO_FN_VBUS0_1,    NULL);
-	gpio_request(GPIO_FN_IDIN_1_18,  NULL);
-	gpio_request(GPIO_FN_PWEN_1_115, NULL);
-	gpio_request(GPIO_FN_OVCN_1_114, NULL);
-	gpio_request(GPIO_FN_EXTLP_1,    NULL);
-	gpio_request(GPIO_FN_OVCN2_1,    NULL);
-
 	/* setup USB phy */
 	__raw_writew(0x8a0a, IOMEM(0xE6058130));	/* USBCR4 */
 
-	/* enable FSI2 port A (ak4643) */
-	gpio_request(GPIO_FN_FSIAIBT,	NULL);
-	gpio_request(GPIO_FN_FSIAILR,	NULL);
-	gpio_request(GPIO_FN_FSIAISLD,	NULL);
-	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
+	/* FSI2 port A (ak4643) */
 	gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
 
 	gpio_request(9, NULL);
@@ -1177,8 +1196,7 @@ static void __init ap4evb_init(void)
 	/* card detect pin for MMC slot (CN7) */
 	gpio_request_one(41, GPIOF_IN, NULL);
 
-	/* setup FSI2 port B (HDMI) */
-	gpio_request(GPIO_FN_FSIBCK, NULL);
+	/* FSI2 port B (HDMI) */
 	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
 
 	/* set SPU2 clock to 119.6 MHz */
@@ -1208,18 +1226,6 @@ static void __init ap4evb_init(void)
 	 * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON.
 	 */
 
-	/* enable KEYSC */
-	gpio_request(GPIO_FN_KEYOUT0, NULL);
-	gpio_request(GPIO_FN_KEYOUT1, NULL);
-	gpio_request(GPIO_FN_KEYOUT2, NULL);
-	gpio_request(GPIO_FN_KEYOUT3, NULL);
-	gpio_request(GPIO_FN_KEYOUT4, NULL);
-	gpio_request(GPIO_FN_KEYIN0_136, NULL);
-	gpio_request(GPIO_FN_KEYIN1_135, NULL);
-	gpio_request(GPIO_FN_KEYIN2_134, NULL);
-	gpio_request(GPIO_FN_KEYIN3_133, NULL);
-	gpio_request(GPIO_FN_KEYIN4,     NULL);
-
 	/* enable TouchScreen */
 	irq_set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
 
@@ -1241,28 +1247,6 @@ static void __init ap4evb_init(void)
 	 * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and
 	 * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF.
 	 */
-
-	gpio_request(GPIO_FN_LCDD17,   NULL);
-	gpio_request(GPIO_FN_LCDD16,   NULL);
-	gpio_request(GPIO_FN_LCDD15,   NULL);
-	gpio_request(GPIO_FN_LCDD14,   NULL);
-	gpio_request(GPIO_FN_LCDD13,   NULL);
-	gpio_request(GPIO_FN_LCDD12,   NULL);
-	gpio_request(GPIO_FN_LCDD11,   NULL);
-	gpio_request(GPIO_FN_LCDD10,   NULL);
-	gpio_request(GPIO_FN_LCDD9,    NULL);
-	gpio_request(GPIO_FN_LCDD8,    NULL);
-	gpio_request(GPIO_FN_LCDD7,    NULL);
-	gpio_request(GPIO_FN_LCDD6,    NULL);
-	gpio_request(GPIO_FN_LCDD5,    NULL);
-	gpio_request(GPIO_FN_LCDD4,    NULL);
-	gpio_request(GPIO_FN_LCDD3,    NULL);
-	gpio_request(GPIO_FN_LCDD2,    NULL);
-	gpio_request(GPIO_FN_LCDD1,    NULL);
-	gpio_request(GPIO_FN_LCDD0,    NULL);
-	gpio_request(GPIO_FN_LCDDISP,  NULL);
-	gpio_request(GPIO_FN_LCDDCK,   NULL);
-
 	gpio_request_one(189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */
 	gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 
@@ -1288,8 +1272,6 @@ static void __init ap4evb_init(void)
 	 */
 
 	/* MIPI-CSI stuff */
-	gpio_request(GPIO_FN_VIO_CKO, NULL);
-
 	clk = clk_get(NULL, "vck1_clk");
 	if (!IS_ERR(clk)) {
 		clk_set_rate(clk, clk_round_rate(clk, 13000000));
@@ -1299,10 +1281,6 @@ static void __init ap4evb_init(void)
 
 	sh7372_add_standard_devices();
 
-	/* HDMI */
-	gpio_request(GPIO_FN_HDMI_HPD, NULL);
-	gpio_request(GPIO_FN_HDMI_CEC, NULL);
-
 	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
 #define SRCR4 IOMEM(0xe61580bc)
 	srcr4 = __raw_readl(SRCR4);

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -584,7 +584,7 @@ static struct regulator_init_data vcc_sdhi0_init_data = {
 static struct fixed_voltage_config vcc_sdhi0_info = {
 	.supply_name = "SDHI0 Vcc",
 	.microvolts = 3300000,
-	.gpio = GPIO_PORT75,
+	.gpio = 75,
 	.enable_high = 1,
 	.init_data = &vcc_sdhi0_init_data,
 };
@@ -615,7 +615,7 @@ static struct regulator_init_data vccq_sdhi0_init_data = {
 };
 
 static struct gpio vccq_sdhi0_gpios[] = {
-	{GPIO_PORT17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" },
+	{17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" },
 };
 
 static struct gpio_regulator_state vccq_sdhi0_states[] = {
@@ -626,7 +626,7 @@ static struct gpio_regulator_state vccq_sdhi0_states[] = {
 static struct gpio_regulator_config vccq_sdhi0_info = {
 	.supply_name = "vqmmc",
 
-	.enable_gpio = GPIO_PORT74,
+	.enable_gpio = 74,
 	.enable_high = 1,
 	.enabled_at_boot = 0,
 
@@ -664,7 +664,7 @@ static struct regulator_init_data vcc_sdhi1_init_data = {
 static struct fixed_voltage_config vcc_sdhi1_info = {
 	.supply_name = "SDHI1 Vcc",
 	.microvolts = 3300000,
-	.gpio = GPIO_PORT16,
+	.gpio = 16,
 	.enable_high = 1,
 	.init_data = &vcc_sdhi1_init_data,
 };
@@ -693,7 +693,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_POWER_OFF_CARD,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
-	.cd_gpio	= GPIO_PORT167,
+	.cd_gpio	= 167,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -736,7 +736,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = {
 			  MMC_CAP_POWER_OFF_CARD,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
 	/* Port72 cannot generate IRQs, will be used in polling mode. */
-	.cd_gpio	= GPIO_PORT72,
+	.cd_gpio	= 72,
 };
 
 static struct resource sdhi1_resources[] = {
@@ -1046,6 +1046,35 @@ static struct platform_device *eva_devices[] __initdata = {
 };
 
 static const struct pinctrl_map eva_pinctrl_map[] = {
+	/* CEU0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
+				  "ceu0_data_0_7", "ceu0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
+				  "ceu0_clk_0", "ceu0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
+				  "ceu0_sync", "ceu0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
+				  "ceu0_field", "ceu0"),
+	/* FSIA */
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
+				  "fsia_sclk_in", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
+				  "fsia_mclk_out", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
+				  "fsia_data_in_1", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
+				  "fsia_data_out_0", "fsia"),
+	/* FSIB */
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
+				  "fsib_mclk_in", "fsib"),
+	/* GETHER */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+				  "gether_mii", "gether"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+				  "gether_int", "gether"),
+	/* HDMI */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",
+				  "hdmi", "hdmi"),
 	/* LCD0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
 				  "lcd0_data24_0", "lcd0"),
@@ -1058,6 +1087,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
 				  "mmc0_data8_1", "mmc0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740",
 				  "mmc0_ctrl_1", "mmc0"),
+	/* SCIFA1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
+				  "scifa1_data", "scifa1"),
 	/* SDHI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
 				  "sdhi0_data4", "sdhi0"),
@@ -1065,6 +1097,12 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
 				  "sdhi0_ctrl", "sdhi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
 				  "sdhi0_wp", "sdhi0"),
+	/* ST1232 */
+	PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740",
+				  "intc_irq10", "intc"),
+	/* USBHS */
+	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740",
+				  "intc_irq7_1", "intc"),
 };
 
 static void __init eva_clock_init(void)
@@ -1119,40 +1157,14 @@ static void __init eva_init(void)
 	r8a7740_pinmux_init();
 	r8a7740_meram_workaround();
 
-	/* SCIFA1 */
-	gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
-	gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
-
 	/* LCDC0 */
-	gpio_request(GPIO_FN_LCDC0_SELECT,	NULL);
-
 	gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 	gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */
 
 	/* Touchscreen */
-	gpio_request(GPIO_FN_IRQ10,	NULL); /* TP_INT */
+	gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
 
 	/* GETHER */
-	gpio_request(GPIO_FN_ET_CRS,		NULL);
-	gpio_request(GPIO_FN_ET_MDC,		NULL);
-	gpio_request(GPIO_FN_ET_MDIO,		NULL);
-	gpio_request(GPIO_FN_ET_TX_ER,		NULL);
-	gpio_request(GPIO_FN_ET_RX_ER,		NULL);
-	gpio_request(GPIO_FN_ET_ERXD0,		NULL);
-	gpio_request(GPIO_FN_ET_ERXD1,		NULL);
-	gpio_request(GPIO_FN_ET_ERXD2,		NULL);
-	gpio_request(GPIO_FN_ET_ERXD3,		NULL);
-	gpio_request(GPIO_FN_ET_TX_CLK,		NULL);
-	gpio_request(GPIO_FN_ET_TX_EN,		NULL);
-	gpio_request(GPIO_FN_ET_ETXD0,		NULL);
-	gpio_request(GPIO_FN_ET_ETXD1,		NULL);
-	gpio_request(GPIO_FN_ET_ETXD2,		NULL);
-	gpio_request(GPIO_FN_ET_ETXD3,		NULL);
-	gpio_request(GPIO_FN_ET_PHY_INT,	NULL);
-	gpio_request(GPIO_FN_ET_COL,		NULL);
-	gpio_request(GPIO_FN_ET_RX_DV,		NULL);
-	gpio_request(GPIO_FN_ET_RX_CLK,		NULL);
-
 	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
 
 	/* USB */
@@ -1163,34 +1175,17 @@ static void __init eva_init(void)
 	} else {
 		/* USB Func */
 		/*
-		 * A1 chip has 2 IRQ7 pin and it was controled by MSEL register.
-		 * OTOH, usbhs interrupt needs its value (HI/LOW) to decide
-		 * USB connection/disconnection (usbhsf_get_vbus()).
-		 * This means we needs to select GPIO_FN_IRQ7_PORT209 first,
-		 * and select GPIO 209 here
+		 * The USBHS interrupt handlers needs to read the IRQ pin value
+		 * (HI/LOW) to diffentiate USB connection and disconnection
+		 * events (usbhsf_get_vbus()). We thus need to select both the
+		 * intc_irq7_1 pin group and GPIO 209 here.
 		 */
-		gpio_request(GPIO_FN_IRQ7_PORT209, NULL);
 		gpio_request_one(209, GPIOF_IN, NULL);
 
 		platform_device_register(&usbhsf_device);
 		usb = &usbhsf_device;
 	}
 
-	/* CEU0 */
-	gpio_request(GPIO_FN_VIO0_D7,		NULL);
-	gpio_request(GPIO_FN_VIO0_D6,		NULL);
-	gpio_request(GPIO_FN_VIO0_D5,		NULL);
-	gpio_request(GPIO_FN_VIO0_D4,		NULL);
-	gpio_request(GPIO_FN_VIO0_D3,		NULL);
-	gpio_request(GPIO_FN_VIO0_D2,		NULL);
-	gpio_request(GPIO_FN_VIO0_D1,		NULL);
-	gpio_request(GPIO_FN_VIO0_D0,		NULL);
-	gpio_request(GPIO_FN_VIO0_CLK,		NULL);
-	gpio_request(GPIO_FN_VIO0_HD,		NULL);
-	gpio_request(GPIO_FN_VIO0_VD,		NULL);
-	gpio_request(GPIO_FN_VIO0_FIELD,	NULL);
-	gpio_request(GPIO_FN_VIO_CKO,		NULL);
-
 	/* CON1/CON15 Camera */
 	gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL);  /* STANDBY */
 	gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */
@@ -1198,24 +1193,11 @@ static void __init eva_init(void)
 	gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL);  /* CAM_PON */
 
 	/* FSI-WM8978 */
-	gpio_request(GPIO_FN_FSIAIBT,		NULL);
-	gpio_request(GPIO_FN_FSIAILR,		NULL);
-	gpio_request(GPIO_FN_FSIAOMC,		NULL);
-	gpio_request(GPIO_FN_FSIAOSLD,		NULL);
-	gpio_request(GPIO_FN_FSIAISLD_PORT5,	NULL);
-
 	gpio_request(7, NULL);
 	gpio_request(8, NULL);
 	gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */
 	gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */
 
-	/* FSI-HDMI */
-	gpio_request(GPIO_FN_FSIBCK,		NULL);
-
-	/* HDMI */
-	gpio_request(GPIO_FN_HDMI_HPD,		NULL);
-	gpio_request(GPIO_FN_HDMI_CEC,		NULL);
-
 	/*
 	 * CAUTION
 	 *

arch/arm/mach-shmobile/board-bockw.c

@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/pinctrl/machine.h>
 #include <linux/platform_device.h>
 #include <linux/smsc911x.h>
 #include <mach/common.h>
@@ -37,6 +38,14 @@ static struct resource smsc911x_resources[] = {
 	DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
 };
 
+static const struct pinctrl_map bockw_pinctrl_map[] = {
+	/* SCIF0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
+				  "scif0_data_a", "scif0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
+				  "scif0_ctrl", "scif0"),
+};
+
 #define IRQ0MR	0x30
 static void __init bockw_init(void)
 {
@@ -46,6 +55,10 @@ static void __init bockw_init(void)
 	r8a7778_init_irq_extpin(1);
 	r8a7778_add_standard_devices();
 
+	pinctrl_register_mappings(bockw_pinctrl_map,
+				  ARRAY_SIZE(bockw_pinctrl_map));
+	r8a7778_pinmux_init();
+
 	fpga = ioremap_nocache(0x18200000, SZ_1M);
 	if (fpga) {
 		/*

arch/arm/mach-shmobile/board-bonito.c

@@ -330,12 +330,6 @@ static struct platform_device smsc_device = {
 	.num_resources	= ARRAY_SIZE(smsc_resources),
 };
 
-/*
- * core board devices
- */
-static struct platform_device *bonito_core_devices[] __initdata = {
-};
-
 /*
  * base board devices
  */
@@ -375,12 +369,37 @@ static void __init bonito_map_io(void)
 #define VCCQ1CR		IOMEM(0xE6058140)
 #define VCCQ1LCDCR	IOMEM(0xE6058186)
 
+/*
+ * HACK: The FPGA mappings should be associated with the FPGA device, but we
+ * don't have one at the moment. Associate them with the PFC device to make
+ * sure they will be applied.
+ */
+static const struct pinctrl_map fpga_pinctrl_map[] = {
+	/* FPGA */
+	PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740",
+				  "bsc_cs5a_0", "bsc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740",
+				  "bsc_cs5b", "bsc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740",
+				  "bsc_cs6a", "bsc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740",
+				  "intc_irq10", "intc"),
+};
+
+static const struct pinctrl_map scifa5_pinctrl_map[] = {
+	/* SCIFA5 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.5", "pfc-r8a7740",
+				  "scifa5_data_2", "scifa5"),
+};
+
 static void __init bonito_init(void)
 {
 	u16 val;
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 
+	pinctrl_register_mappings(fpga_pinctrl_map,
+				  ARRAY_SIZE(fpga_pinctrl_map));
 	r8a7740_pinmux_init();
 	bonito_fpga_init();
 
@@ -397,9 +416,6 @@ static void __init bonito_init(void)
 
 	r8a7740_add_standard_devices();
 
-	platform_add_devices(bonito_core_devices,
-			     ARRAY_SIZE(bonito_core_devices));
-
 	/*
 	 * base board settings
 	 */
@@ -409,14 +425,6 @@ static void __init bonito_init(void)
 		u16 bsw3;
 		u16 bsw4;
 
-		/*
-		 * FPGA
-		 */
-		gpio_request(GPIO_FN_CS5B,		NULL);
-		gpio_request(GPIO_FN_CS6A,		NULL);
-		gpio_request(GPIO_FN_CS5A_PORT105,	NULL);
-		gpio_request(GPIO_FN_IRQ10,		NULL);
-
 		val = bonito_fpga_read(BVERR);
 		pr_info("bonito version: cpu %02x, base %02x\n",
 			((val >> 8) & 0xFF),
@@ -432,8 +440,8 @@ static void __init bonito_init(void)
 		if (BIT_OFF(bsw2, 1) &&	/* S38.3 = ON */
 		    BIT_OFF(bsw3, 9) &&	/* S39.6 = ON */
 		    BIT_OFF(bsw4, 4)) {	/* S43.1 = ON */
-			gpio_request(GPIO_FN_SCIFA5_TXD_PORT91,	NULL);
-			gpio_request(GPIO_FN_SCIFA5_RXD_PORT92,	NULL);
+			pinctrl_register_mappings(scifa5_pinctrl_map,
+						  ARRAY_SIZE(scifa5_pinctrl_map));
 		}
 
 		/*
@@ -443,7 +451,6 @@ static void __init bonito_init(void)
 		    BIT_ON(bsw2, 2)) {	/* S38.2 = OFF */
 			pinctrl_register_mappings(lcdc0_pinctrl_map,
 						  ARRAY_SIZE(lcdc0_pinctrl_map));
-			gpio_request(GPIO_FN_LCDC0_SELECT, NULL);
 
 			gpio_request_one(61, GPIOF_OUT_INIT_HIGH,
 					 NULL); /* LCDDON */

arch/arm/mach-shmobile/board-kzm9g-reference.c

@@ -79,7 +79,6 @@ static void __init kzm_init(void)
 	sh73a0_pinmux_init();
 
 	/* enable SD */
-	gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON,	NULL);
 	gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
 
 	gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */

arch/arm/mach-shmobile/board-kzm9g.c

@@ -663,13 +663,13 @@ static unsigned long pin_pullup_conf[] = {
 
 static const struct pinctrl_map kzm_pinctrl_map[] = {
 	/* FSIA (AK4648) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
 				  "fsia_mclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
 				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
 				  "fsia_data_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
 				  "fsia_data_out", "fsia"),
 	/* I2C3 */
 	PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
@@ -788,9 +788,6 @@ static void __init kzm_init(void)
 	/* Touchscreen */
 	gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */
 
-	/* enable SD */
-	gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON,	NULL);
-
 #ifdef CONFIG_CACHE_L2X0
 	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
 	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);

arch/arm/mach-shmobile/board-lager.c

@@ -21,15 +21,30 @@
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
 #include <linux/kernel.h>
+#include <linux/pinctrl/machine.h>
 #include <linux/platform_device.h>
 #include <mach/common.h>
 #include <mach/r8a7790.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+static const struct pinctrl_map lager_pinctrl_map[] = {
+	/* SCIF0 (CN19: DEBUG SERIAL0) */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
+				  "scif0_data", "scif0"),
+	/* SCIF1 (CN20: DEBUG SERIAL1) */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
+				  "scif1_data", "scif1"),
+};
+
 static void __init lager_add_standard_devices(void)
 {
 	r8a7790_clock_init();
+
+	pinctrl_register_mappings(lager_pinctrl_map,
+				  ARRAY_SIZE(lager_pinctrl_map));
+	r8a7790_pinmux_init();
+
 	r8a7790_add_standard_devices();
 }
 

arch/arm/mach-shmobile/board-mackerel.c

@@ -1309,6 +1309,49 @@ static struct i2c_board_info i2c1_devices[] = {
 };
 
 static const struct pinctrl_map mackerel_pinctrl_map[] = {
+	/* ADXL34X */
+	PIN_MAP_MUX_GROUP_DEFAULT("1-0053", "pfc-sh7372",
+				  "intc_irq21", "intc"),
+	/* CEU */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+				  "ceu_data_0_7", "ceu"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+				  "ceu_clk_0", "ceu"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+				  "ceu_sync", "ceu"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+				  "ceu_field", "ceu"),
+	/* FLCTL */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
+				  "flctl_data", "flctl"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
+				  "flctl_ce0", "flctl"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
+				  "flctl_ctrl", "flctl"),
+	/* FSIA (AK4643) */
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+				  "fsia_sclk_in", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+				  "fsia_data_in", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+				  "fsia_data_out", "fsia"),
+	/* FSIB (HDMI) */
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372",
+				  "fsib_mclk_in", "fsib"),
+	/* HDMI */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-sh7372",
+				  "hdmi", "hdmi"),
+	/* LCDC */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
+				  "lcd_data24", "lcd"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
+				  "lcd_sync", "lcd"),
+	/* SCIFA0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372",
+				  "scifa0_data", "scifa0"),
+	/* SCIFA2 (GT-720F GPS module) */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh7372",
+				  "scifa2_data", "scifa2"),
 	/* SDHI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
 				  "sdhi0_data4", "sdhi0"),
@@ -1316,6 +1359,8 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = {
 				  "sdhi0_ctrl", "sdhi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
 				  "sdhi0_wp", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
+				  "intc_irq26_1", "intc"),
 	/* SDHI1 */
 #if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
@@ -1334,6 +1379,25 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = {
 				  "sdhi2_data4", "sdhi2"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372",
 				  "sdhi2_ctrl", "sdhi2"),
+	/* SMSC911X */
+	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
+				  "bsc_cs5a", "bsc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
+				  "intc_irq6_0", "intc"),
+	/* ST1232 */
+	PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-sh7372",
+				  "intc_irq7_0", "intc"),
+	/* TCA6416 */
+	PIN_MAP_MUX_GROUP_DEFAULT("0-0020", "pfc-sh7372",
+				  "intc_irq9_0", "intc"),
+	/* USBHS0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372",
+				  "usb0_vbus", "usb0"),
+	/* USBHS1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
+				  "usb1_vbus", "usb1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
+				  "usb1_otg_id_0", "usb1"),
 };
 
 #define GPIO_PORT9CR	IOMEM(0xE6051009)
@@ -1377,61 +1441,18 @@ static void __init mackerel_init(void)
 				  ARRAY_SIZE(mackerel_pinctrl_map));
 	sh7372_pinmux_init();
 
-	/* enable SCIFA0 */
-	gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
-	gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
-
-	/* enable SMSC911X */
-	gpio_request(GPIO_FN_CS5A,	NULL);
-	gpio_request(GPIO_FN_IRQ6_39,	NULL);
-
-	/* LCDC */
-	gpio_request(GPIO_FN_LCDD23,   NULL);
-	gpio_request(GPIO_FN_LCDD22,   NULL);
-	gpio_request(GPIO_FN_LCDD21,   NULL);
-	gpio_request(GPIO_FN_LCDD20,   NULL);
-	gpio_request(GPIO_FN_LCDD19,   NULL);
-	gpio_request(GPIO_FN_LCDD18,   NULL);
-	gpio_request(GPIO_FN_LCDD17,   NULL);
-	gpio_request(GPIO_FN_LCDD16,   NULL);
-	gpio_request(GPIO_FN_LCDD15,   NULL);
-	gpio_request(GPIO_FN_LCDD14,   NULL);
-	gpio_request(GPIO_FN_LCDD13,   NULL);
-	gpio_request(GPIO_FN_LCDD12,   NULL);
-	gpio_request(GPIO_FN_LCDD11,   NULL);
-	gpio_request(GPIO_FN_LCDD10,   NULL);
-	gpio_request(GPIO_FN_LCDD9,    NULL);
-	gpio_request(GPIO_FN_LCDD8,    NULL);
-	gpio_request(GPIO_FN_LCDD7,    NULL);
-	gpio_request(GPIO_FN_LCDD6,    NULL);
-	gpio_request(GPIO_FN_LCDD5,    NULL);
-	gpio_request(GPIO_FN_LCDD4,    NULL);
-	gpio_request(GPIO_FN_LCDD3,    NULL);
-	gpio_request(GPIO_FN_LCDD2,    NULL);
-	gpio_request(GPIO_FN_LCDD1,    NULL);
-	gpio_request(GPIO_FN_LCDD0,    NULL);
-	gpio_request(GPIO_FN_LCDDISP,  NULL);
-	gpio_request(GPIO_FN_LCDDCK,   NULL);
-
 	/* backlight, off by default */
 	gpio_request_one(31, GPIOF_OUT_INIT_LOW, NULL);
 
 	gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 
 	/* USBHS0 */
-	gpio_request(GPIO_FN_VBUS0_0, NULL);
 	gpio_request_pulldown(GPIO_PORT168CR); /* VBUS0_0 pull down */
 
 	/* USBHS1 */
-	gpio_request(GPIO_FN_VBUS0_1, NULL);
 	gpio_request_pulldown(GPIO_PORT167CR); /* VBUS0_1 pull down */
-	gpio_request(GPIO_FN_IDIN_1_113, NULL);
 
-	/* enable FSI2 port A (ak4643) */
-	gpio_request(GPIO_FN_FSIAIBT,	NULL);
-	gpio_request(GPIO_FN_FSIAILR,	NULL);
-	gpio_request(GPIO_FN_FSIAISLD,	NULL);
-	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
+	/* FSI2 port A (ak4643) */
 	gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
 
 	gpio_request(9,  NULL);
@@ -1441,8 +1462,7 @@ static void __init mackerel_init(void)
 
 	intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
 
-	/* setup FSI2 port B (HDMI) */
-	gpio_request(GPIO_FN_FSIBCK, NULL);
+	/* FSI2 port B (HDMI) */
 	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
 
 	/* set SPU2 clock to 119.6 MHz */
@@ -1452,68 +1472,15 @@ static void __init mackerel_init(void)
 		clk_put(clk);
 	}
 
-	/* enable Keypad */
-	gpio_request(GPIO_FN_IRQ9_42,	NULL);
+	/* Keypad */
 	irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
 
-	/* enable Touchscreen */
-	gpio_request(GPIO_FN_IRQ7_40,	NULL);
+	/* Touchscreen */
 	irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
 
-	/* enable Accelerometer */
-	gpio_request(GPIO_FN_IRQ21,	NULL);
+	/* Accelerometer */
 	irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
 
-	/* SDHI0 PORT172 card-detect IRQ26 */
-	gpio_request(GPIO_FN_IRQ26_172, NULL);
-
-	/* FLCTL */
-	gpio_request(GPIO_FN_D0_NAF0, NULL);
-	gpio_request(GPIO_FN_D1_NAF1, NULL);
-	gpio_request(GPIO_FN_D2_NAF2, NULL);
-	gpio_request(GPIO_FN_D3_NAF3, NULL);
-	gpio_request(GPIO_FN_D4_NAF4, NULL);
-	gpio_request(GPIO_FN_D5_NAF5, NULL);
-	gpio_request(GPIO_FN_D6_NAF6, NULL);
-	gpio_request(GPIO_FN_D7_NAF7, NULL);
-	gpio_request(GPIO_FN_D8_NAF8, NULL);
-	gpio_request(GPIO_FN_D9_NAF9, NULL);
-	gpio_request(GPIO_FN_D10_NAF10, NULL);
-	gpio_request(GPIO_FN_D11_NAF11, NULL);
-	gpio_request(GPIO_FN_D12_NAF12, NULL);
-	gpio_request(GPIO_FN_D13_NAF13, NULL);
-	gpio_request(GPIO_FN_D14_NAF14, NULL);
-	gpio_request(GPIO_FN_D15_NAF15, NULL);
-	gpio_request(GPIO_FN_FCE0, NULL);
-	gpio_request(GPIO_FN_WE0_FWE, NULL);
-	gpio_request(GPIO_FN_FRB, NULL);
-	gpio_request(GPIO_FN_A4_FOE, NULL);
-	gpio_request(GPIO_FN_A5_FCDE, NULL);
-	gpio_request(GPIO_FN_RD_FSC, NULL);
-
-	/* enable GPS module (GT-720F) */
-	gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
-	gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
-
-	/* CEU */
-	gpio_request(GPIO_FN_VIO_CLK, NULL);
-	gpio_request(GPIO_FN_VIO_VD, NULL);
-	gpio_request(GPIO_FN_VIO_HD, NULL);
-	gpio_request(GPIO_FN_VIO_FIELD, NULL);
-	gpio_request(GPIO_FN_VIO_CKO, NULL);
-	gpio_request(GPIO_FN_VIO_D7, NULL);
-	gpio_request(GPIO_FN_VIO_D6, NULL);
-	gpio_request(GPIO_FN_VIO_D5, NULL);
-	gpio_request(GPIO_FN_VIO_D4, NULL);
-	gpio_request(GPIO_FN_VIO_D3, NULL);
-	gpio_request(GPIO_FN_VIO_D2, NULL);
-	gpio_request(GPIO_FN_VIO_D1, NULL);
-	gpio_request(GPIO_FN_VIO_D0, NULL);
-
-	/* HDMI */
-	gpio_request(GPIO_FN_HDMI_HPD, NULL);
-	gpio_request(GPIO_FN_HDMI_CEC, NULL);
-
 	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
 	srcr4 = __raw_readl(SRCR4);
 	__raw_writel(srcr4 | (1 << 13), SRCR4);

arch/arm/mach-shmobile/board-marzen.c

@@ -28,6 +28,7 @@
 #include <linux/leds.h>
 #include <linux/dma-mapping.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/gpio-rcar.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
@@ -173,15 +174,15 @@ static struct platform_device usb_phy_device = {
 static struct gpio_led marzen_leds[] = {
 	{
 		.name		= "led2",
-		.gpio		= 157,
+		.gpio		= RCAR_GP_PIN(4, 29),
 		.default_state	= LEDS_GPIO_DEFSTATE_ON,
 	}, {
 		.name		= "led3",
-		.gpio		= 158,
+		.gpio		= RCAR_GP_PIN(4, 30),
 		.default_state	= LEDS_GPIO_DEFSTATE_ON,
 	}, {
 		.name		= "led4",
-		.gpio		= 159,
+		.gpio		= RCAR_GP_PIN(4, 31),
 		.default_state	= LEDS_GPIO_DEFSTATE_ON,
 	},
 };

arch/arm/mach-shmobile/clock-r8a7740.c

@@ -266,7 +266,7 @@ static struct clk fsiack_clk = {
 static struct clk fsibck_clk = {
 };
 
-struct clk *main_clks[] = {
+static struct clk *main_clks[] = {
 	&extalr_clk,
 	&extal1_clk,
 	&extal2_clk,
@@ -317,7 +317,7 @@ enum {
 	DIV4_NR
 };
 
-struct clk div4_clks[DIV4_NR] = {
+static struct clk div4_clks[DIV4_NR] = {
 	[DIV4_I]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
 	[DIV4_ZG]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
 	[DIV4_B]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  8, 0x6fff, CLK_ENABLE_ON_INIT),
@@ -461,7 +461,7 @@ enum {
 
 	MSTP329, MSTP328, MSTP323, MSTP320,
 	MSTP314, MSTP313, MSTP312,
-	MSTP309,
+	MSTP309, MSTP304,
 
 	MSTP416, MSTP415, MSTP407, MSTP406,
 
@@ -499,6 +499,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 12, 0), /* MMC */
 	[MSTP309] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3,  9, 0), /* GEther */
+	[MSTP304] = SH_CLK_MSTP32(&div4_clks[DIV4_CP],	SMSTPCR3,  4, 0), /* TPU0 */
 
 	[MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 16, 0), /* USBHOST */
 	[MSTP415] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 15, 0), /* SDHI2 */
@@ -551,6 +552,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_tmu.4",		&mstp_clks[MSTP111]),
 	CLKDEV_DEV_ID("sh_tmu.5",		&mstp_clks[MSTP111]),
 	CLKDEV_DEV_ID("i2c-sh_mobile.0",	&mstp_clks[MSTP116]),
+	CLKDEV_DEV_ID("fff20000.i2c",		&mstp_clks[MSTP116]),
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1",	&mstp_clks[MSTP117]),
 	CLKDEV_DEV_ID("sh_tmu.0",		&mstp_clks[MSTP125]),
 	CLKDEV_DEV_ID("sh_tmu.1",		&mstp_clks[MSTP125]),
@@ -584,6 +586,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_cmt.10",		&mstp_clks[MSTP329]),
 	CLKDEV_DEV_ID("sh_fsi2",		&mstp_clks[MSTP328]),
 	CLKDEV_DEV_ID("i2c-sh_mobile.1",	&mstp_clks[MSTP323]),
+	CLKDEV_DEV_ID("e6c20000.i2c",		&mstp_clks[MSTP323]),
 	CLKDEV_DEV_ID("renesas_usbhs",		&mstp_clks[MSTP320]),
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0",	&mstp_clks[MSTP314]),
 	CLKDEV_DEV_ID("e6850000.sdhi",          &mstp_clks[MSTP314]),
@@ -592,6 +595,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mmcif",		&mstp_clks[MSTP312]),
 	CLKDEV_DEV_ID("e6bd0000.mmcif",         &mstp_clks[MSTP312]),
 	CLKDEV_DEV_ID("sh-eth",			&mstp_clks[MSTP309]),
+	CLKDEV_DEV_ID("e9a00000.sh-eth",	&mstp_clks[MSTP309]),
+	CLKDEV_DEV_ID("renesas_tpu_pwm",	&mstp_clks[MSTP304]),
 
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2",	&mstp_clks[MSTP415]),
 	CLKDEV_DEV_ID("e6870000.sdhi",          &mstp_clks[MSTP415]),

arch/arm/mach-shmobile/clock-r8a7778.c

@@ -23,9 +23,23 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+/*
+ *     MD      MD      MD      MD       PLLA   PLLB    EXTAL   clki    clkz
+ *     19      18      12      11                      (HMz)   (MHz)   (MHz)
+ *----------------------------------------------------------------------------
+ *     1       0       0       0       x21     x21     38.00   800     800
+ *     1       0       0       1       x24     x24     33.33   800     800
+ *     1       0       1       0       x28     x28     28.50   800     800
+ *     1       0       1       1       x32     x32     25.00   800     800
+ *     1       1       0       1       x24     x21     33.33   800     700
+ *     1       1       1       0       x28     x21     28.50   800     600
+ *     1       1       1       1       x32     x24     25.00   800     600
+ */
+
 #include <linux/io.h>
 #include <linux/sh_clk.h>
 #include <linux/clkdev.h>
+#include <mach/clock.h>
 #include <mach/common.h>
 
 #define MSTPCR0		IOMEM(0xffc80030)
@@ -37,6 +51,9 @@
 #define MSTPCR4		IOMEM(0xffc80050)
 #define MSTPCR5		IOMEM(0xffc80054)
 #define MSTPCR6		IOMEM(0xffc80058)
+#define MODEMR		0xFFCC0020
+
+#define MD(nr)	BIT(nr)
 
 /* ioremap() through clock mapping mandatory to avoid
  * collision with ARM coherent DMA virtual memory range.
@@ -47,36 +64,71 @@ static struct clk_mapping cpg_mapping = {
 	.len	= 0x80,
 };
 
-static struct clk clkp = {
-	.rate   = 62500000, /* FIXME: shortcut */
-	.flags  = CLK_ENABLE_ON_INIT,
+static struct clk extal_clk = {
+	/* .rate will be updated on r8a7778_clock_init() */
 	.mapping = &cpg_mapping,
 };
 
+/*
+ * clock ratio of these clock will be updated
+ * on r8a7778_clock_init()
+ */
+SH_FIXED_RATIO_CLK_SET(plla_clk,	extal_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(pllb_clk,	extal_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(i_clk,		plla_clk,  1, 1);
+SH_FIXED_RATIO_CLK_SET(s_clk,		plla_clk,  1, 1);
+SH_FIXED_RATIO_CLK_SET(s1_clk,		plla_clk,  1, 1);
+SH_FIXED_RATIO_CLK_SET(s3_clk,		plla_clk,  1, 1);
+SH_FIXED_RATIO_CLK_SET(s4_clk,		plla_clk,  1, 1);
+SH_FIXED_RATIO_CLK_SET(b_clk,		plla_clk,  1, 1);
+SH_FIXED_RATIO_CLK_SET(out_clk,		plla_clk,  1, 1);
+SH_FIXED_RATIO_CLK_SET(p_clk,		plla_clk,  1, 1);
+SH_FIXED_RATIO_CLK_SET(g_clk,		plla_clk,  1, 1);
+SH_FIXED_RATIO_CLK_SET(z_clk,		pllb_clk,  1, 1);
+
 static struct clk *main_clks[] = {
-	&clkp,
+	&extal_clk,
+	&plla_clk,
+	&pllb_clk,
+	&i_clk,
+	&s_clk,
+	&s1_clk,
+	&s3_clk,
+	&s4_clk,
+	&b_clk,
+	&out_clk,
+	&p_clk,
+	&g_clk,
+	&z_clk,
 };
 
 enum {
+	MSTP323, MSTP322, MSTP321,
 	MSTP114,
 	MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
 	MSTP016, MSTP015,
 	MSTP_NR };
 
 static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP114] = SH_CLK_MSTP32(&clkp, MSTPCR1, 14, 0), /* Ether */
-	[MSTP026] = SH_CLK_MSTP32(&clkp, MSTPCR0, 26, 0), /* SCIF0 */
-	[MSTP025] = SH_CLK_MSTP32(&clkp, MSTPCR0, 25, 0), /* SCIF1 */
-	[MSTP024] = SH_CLK_MSTP32(&clkp, MSTPCR0, 24, 0), /* SCIF2 */
-	[MSTP023] = SH_CLK_MSTP32(&clkp, MSTPCR0, 23, 0), /* SCIF3 */
-	[MSTP022] = SH_CLK_MSTP32(&clkp, MSTPCR0, 22, 0), /* SCIF4 */
-	[MSTP021] = SH_CLK_MSTP32(&clkp, MSTPCR0, 21, 0), /* SCIF5 */
-	[MSTP016] = SH_CLK_MSTP32(&clkp, MSTPCR0, 16, 0), /* TMU0 */
-	[MSTP015] = SH_CLK_MSTP32(&clkp, MSTPCR0, 15, 0), /* TMU1 */
+	[MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */
+	[MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
+	[MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
+	[MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
+	[MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */
+	[MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */
+	[MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */
+	[MSTP023] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 23, 0), /* SCIF3 */
+	[MSTP022] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 22, 0), /* SCIF4 */
+	[MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
+	[MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
+	[MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
 };
 
 static struct clk_lookup lookups[] = {
 	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
 	CLKDEV_DEV_ID("sh-eth",	&mstp_clks[MSTP114]), /* Ether */
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
@@ -90,8 +142,86 @@ static struct clk_lookup lookups[] = {
 
 void __init r8a7778_clock_init(void)
 {
+	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
+	u32 mode;
 	int k, ret = 0;
 
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	switch (mode & (MD(19) | MD(18) | MD(12) | MD(11))) {
+	case MD(19):
+		extal_clk.rate = 38000000;
+		SH_CLK_SET_RATIO(&plla_clk_ratio,	21, 1);
+		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
+		break;
+	case MD(19) | MD(11):
+		extal_clk.rate = 33333333;
+		SH_CLK_SET_RATIO(&plla_clk_ratio,	24, 1);
+		SH_CLK_SET_RATIO(&pllb_clk_ratio,	24, 1);
+		break;
+	case MD(19) | MD(12):
+		extal_clk.rate = 28500000;
+		SH_CLK_SET_RATIO(&plla_clk_ratio,	28, 1);
+		SH_CLK_SET_RATIO(&pllb_clk_ratio,	28, 1);
+		break;
+	case MD(19) | MD(12) | MD(11):
+		extal_clk.rate = 25000000;
+		SH_CLK_SET_RATIO(&plla_clk_ratio,	32, 1);
+		SH_CLK_SET_RATIO(&pllb_clk_ratio,	32, 1);
+		break;
+	case MD(19) | MD(18) | MD(11):
+		extal_clk.rate = 33333333;
+		SH_CLK_SET_RATIO(&plla_clk_ratio,	24, 1);
+		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
+		break;
+	case MD(19) | MD(18) | MD(12):
+		extal_clk.rate = 28500000;
+		SH_CLK_SET_RATIO(&plla_clk_ratio,	28, 1);
+		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
+		break;
+	case MD(19) | MD(18) | MD(12) | MD(11):
+		extal_clk.rate = 25000000;
+		SH_CLK_SET_RATIO(&plla_clk_ratio,	32, 1);
+		SH_CLK_SET_RATIO(&pllb_clk_ratio,	24, 1);
+		break;
+	default:
+		BUG();
+	}
+
+	if (mode & MD(1)) {
+		SH_CLK_SET_RATIO(&i_clk_ratio,	1, 1);
+		SH_CLK_SET_RATIO(&s_clk_ratio,	1, 3);
+		SH_CLK_SET_RATIO(&s1_clk_ratio,	1, 6);
+		SH_CLK_SET_RATIO(&s3_clk_ratio,	1, 4);
+		SH_CLK_SET_RATIO(&s4_clk_ratio,	1, 8);
+		SH_CLK_SET_RATIO(&p_clk_ratio,	1, 12);
+		SH_CLK_SET_RATIO(&g_clk_ratio,	1, 12);
+		if (mode & MD(2)) {
+			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 18);
+			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 18);
+		} else {
+			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 12);
+			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 12);
+		}
+	} else {
+		SH_CLK_SET_RATIO(&i_clk_ratio,	1, 1);
+		SH_CLK_SET_RATIO(&s_clk_ratio,	1, 4);
+		SH_CLK_SET_RATIO(&s1_clk_ratio,	1, 8);
+		SH_CLK_SET_RATIO(&s3_clk_ratio,	1, 4);
+		SH_CLK_SET_RATIO(&s4_clk_ratio,	1, 8);
+		SH_CLK_SET_RATIO(&p_clk_ratio,	1, 16);
+		SH_CLK_SET_RATIO(&g_clk_ratio,	1, 12);
+		if (mode & MD(2)) {
+			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 16);
+			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 16);
+		} else {
+			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 12);
+			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 12);
+		}
+	}
+
 	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
 		ret = clk_register(main_clks[k]);
 

arch/arm/mach-shmobile/clock-r8a7779.c

@@ -112,7 +112,7 @@ static struct clk *main_clks[] = {
 };
 
 enum { MSTP323, MSTP322, MSTP321, MSTP320,
-	MSTP115, MSTP114,
+	MSTP116, MSTP115, MSTP114,
 	MSTP103, MSTP101, MSTP100,
 	MSTP030,
 	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
@@ -125,6 +125,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP322] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */
 	[MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */
+	[MSTP116] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 16, 0), /* PCIe */
 	[MSTP115] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 15, 0), /* SATA */
 	[MSTP114] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 14, 0), /* Ether */
 	[MSTP103] = SH_CLK_MSTP32(&clks_clk, MSTPCR1,  3, 0), /* DU */
@@ -161,6 +162,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("peripheral_clk",	&clkp_clk),
 
 	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("rcar-pcie", &mstp_clks[MSTP116]), /* PCIe */
 	CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */
 	CLKDEV_DEV_ID("fc600000.sata", &mstp_clks[MSTP115]), /* SATA w/DT */
 	CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP114]), /* Ether */

arch/arm/mach-shmobile/clock-r8a7790.c

@@ -22,39 +22,174 @@
 #include <linux/kernel.h>
 #include <linux/sh_clk.h>
 #include <linux/clkdev.h>
+#include <mach/clock.h>
 #include <mach/common.h>
 
+/*
+ *   MD		EXTAL		PLL0	PLL1	PLL3
+ * 14 13 19	(MHz)		*1	*1
+ *---------------------------------------------------
+ * 0  0  0	15 x 1		x172/2	x208/2	x106
+ * 0  0  1	15 x 1		x172/2	x208/2	x88
+ * 0  1  0	20 x 1		x130/2	x156/2	x80
+ * 0  1  1	20 x 1		x130/2	x156/2	x66
+ * 1  0  0	26 / 2		x200/2	x240/2	x122
+ * 1  0  1	26 / 2		x200/2	x240/2	x102
+ * 1  1  0	30 / 2		x172/2	x208/2	x106
+ * 1  1  1	30 / 2		x172/2	x208/2	x88
+ *
+ * *1 :	Table 7.6 indicates VCO ouput (PLLx = VCO/2)
+ *	see "p1 / 2" on R8A7790_CLOCK_ROOT() below
+ */
+
+#define MD(nr)	(1 << nr)
+
 #define CPG_BASE 0xe6150000
 #define CPG_LEN 0x1000
 
 #define SMSTPCR2 0xe6150138
+#define SMSTPCR3 0xe615013c
 #define SMSTPCR7 0xe615014c
 
+#define MODEMR		0xE6160060
+#define SDCKCR		0xE6150074
+#define SD2CKCR		0xE6150078
+#define SD3CKCR		0xE615007C
+#define MMC0CKCR	0xE6150240
+#define MMC1CKCR	0xE6150244
+#define SSPCKCR		0xE6150248
+#define SSPRSCKCR	0xE615024C
+
 static struct clk_mapping cpg_mapping = {
 	.phys   = CPG_BASE,
 	.len    = CPG_LEN,
 };
 
-static struct clk p_clk = {
-	.rate	= 65000000, /* shortcut for now */
+static struct clk extal_clk = {
+	/* .rate will be updated on r8a7790_clock_init() */
 	.mapping	= &cpg_mapping,
 };
 
-static struct clk mp_clk = {
-	.rate	= 52000000,  /* shortcut for now */
-	.mapping	= &cpg_mapping,
+static struct sh_clk_ops followparent_clk_ops = {
+	.recalc	= followparent_recalc,
+};
+
+static struct clk main_clk = {
+	/* .parent will be set r8a73a4_clock_init */
+	.ops	= &followparent_clk_ops,
 };
 
+/*
+ * clock ratio of these clock will be updated
+ * on r8a7790_clock_init()
+ */
+SH_FIXED_RATIO_CLK_SET(pll1_clk,		main_clk,	1, 1);
+SH_FIXED_RATIO_CLK_SET(pll3_clk,		main_clk,	1, 1);
+SH_FIXED_RATIO_CLK_SET(lb_clk,			pll1_clk,	1, 1);
+SH_FIXED_RATIO_CLK_SET(qspi_clk,		pll1_clk,	1, 1);
+
+/* fixed ratio clock */
+SH_FIXED_RATIO_CLK_SET(extal_div2_clk,		extal_clk,	1, 2);
+SH_FIXED_RATIO_CLK_SET(cp_clk,			extal_clk,	1, 2);
+
+SH_FIXED_RATIO_CLK_SET(pll1_div2_clk,		pll1_clk,	1, 2);
+SH_FIXED_RATIO_CLK_SET(zg_clk,			pll1_clk,	1, 3);
+SH_FIXED_RATIO_CLK_SET(zx_clk,			pll1_clk,	1, 3);
+SH_FIXED_RATIO_CLK_SET(zs_clk,			pll1_clk,	1, 6);
+SH_FIXED_RATIO_CLK_SET(hp_clk,			pll1_clk,	1, 12);
+SH_FIXED_RATIO_CLK_SET(i_clk,			pll1_clk,	1, 2);
+SH_FIXED_RATIO_CLK_SET(b_clk,			pll1_clk,	1, 12);
+SH_FIXED_RATIO_CLK_SET(p_clk,			pll1_clk,	1, 24);
+SH_FIXED_RATIO_CLK_SET(cl_clk,			pll1_clk,	1, 48);
+SH_FIXED_RATIO_CLK_SET(m2_clk,			pll1_clk,	1, 8);
+SH_FIXED_RATIO_CLK_SET(imp_clk,			pll1_clk,	1, 4);
+SH_FIXED_RATIO_CLK_SET(rclk_clk,		pll1_clk,	1, (48 * 1024));
+SH_FIXED_RATIO_CLK_SET(oscclk_clk,		pll1_clk,	1, (12 * 1024));
+
+SH_FIXED_RATIO_CLK_SET(zb3_clk,			pll3_clk,	1, 4);
+SH_FIXED_RATIO_CLK_SET(zb3d2_clk,		pll3_clk,	1, 8);
+SH_FIXED_RATIO_CLK_SET(ddr_clk,			pll3_clk,	1, 8);
+SH_FIXED_RATIO_CLK_SET(mp_clk,			pll1_div2_clk,	1, 15);
+
 static struct clk *main_clks[] = {
+	&extal_clk,
+	&extal_div2_clk,
+	&main_clk,
+	&pll1_clk,
+	&pll1_div2_clk,
+	&pll3_clk,
+	&lb_clk,
+	&qspi_clk,
+	&zg_clk,
+	&zx_clk,
+	&zs_clk,
+	&hp_clk,
+	&i_clk,
+	&b_clk,
 	&p_clk,
+	&cl_clk,
+	&m2_clk,
+	&imp_clk,
+	&rclk_clk,
+	&oscclk_clk,
+	&zb3_clk,
+	&zb3d2_clk,
+	&ddr_clk,
 	&mp_clk,
+	&cp_clk,
+};
+
+/* SDHI (DIV4) clock */
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum {
+	DIV4_SDH, DIV4_SD0, DIV4_SD1, DIV4_NR
+};
+
+static struct clk div4_clks[DIV4_NR] = {
+	[DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
+	[DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
+	[DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1de0, CLK_ENABLE_ON_INIT),
+};
+
+/* DIV6 clocks */
+enum {
+	DIV6_SD2, DIV6_SD3,
+	DIV6_MMC0, DIV6_MMC1,
+	DIV6_SSP, DIV6_SSPRS,
+	DIV6_NR
+};
+
+static struct clk div6_clks[DIV6_NR] = {
+	[DIV6_SD2]	= SH_CLK_DIV6(&pll1_div2_clk, SD2CKCR, 0),
+	[DIV6_SD3]	= SH_CLK_DIV6(&pll1_div2_clk, SD3CKCR, 0),
+	[DIV6_MMC0]	= SH_CLK_DIV6(&pll1_div2_clk, MMC0CKCR, 0),
+	[DIV6_MMC1]	= SH_CLK_DIV6(&pll1_div2_clk, MMC1CKCR, 0),
+	[DIV6_SSP]	= SH_CLK_DIV6(&pll1_div2_clk, SSPCKCR, 0),
+	[DIV6_SSPRS]	= SH_CLK_DIV6(&pll1_div2_clk, SSPRSCKCR, 0),
+};
+
+/* MSTP */
+enum {
+	MSTP721, MSTP720,
+	MSTP304,
+	MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
+	MSTP_NR
 };
 
-enum { MSTP721, MSTP720,
-	MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP_NR };
 static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
 	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+	[MSTP304] = SH_CLK_MSTP32(&cp_clk, SMSTPCR3, 4, 0), /* TPU0 */
 	[MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
 	[MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
 	[MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
@@ -64,6 +199,48 @@ static struct clk mstp_clks[MSTP_NR] = {
 };
 
 static struct clk_lookup lookups[] = {
+
+	/* main clocks */
+	CLKDEV_CON_ID("extal",		&extal_clk),
+	CLKDEV_CON_ID("extal_div2",	&extal_div2_clk),
+	CLKDEV_CON_ID("main",		&main_clk),
+	CLKDEV_CON_ID("pll1",		&pll1_clk),
+	CLKDEV_CON_ID("pll1_div2",	&pll1_div2_clk),
+	CLKDEV_CON_ID("pll3",		&pll3_clk),
+	CLKDEV_CON_ID("zg",		&zg_clk),
+	CLKDEV_CON_ID("zx",		&zx_clk),
+	CLKDEV_CON_ID("zs",		&zs_clk),
+	CLKDEV_CON_ID("hp",		&hp_clk),
+	CLKDEV_CON_ID("i",		&i_clk),
+	CLKDEV_CON_ID("b",		&b_clk),
+	CLKDEV_CON_ID("lb",		&lb_clk),
+	CLKDEV_CON_ID("p",		&p_clk),
+	CLKDEV_CON_ID("cl",		&cl_clk),
+	CLKDEV_CON_ID("m2",		&m2_clk),
+	CLKDEV_CON_ID("imp",		&imp_clk),
+	CLKDEV_CON_ID("rclk",		&rclk_clk),
+	CLKDEV_CON_ID("oscclk",		&oscclk_clk),
+	CLKDEV_CON_ID("zb3",		&zb3_clk),
+	CLKDEV_CON_ID("zb3d2",		&zb3d2_clk),
+	CLKDEV_CON_ID("ddr",		&ddr_clk),
+	CLKDEV_CON_ID("mp",		&mp_clk),
+	CLKDEV_CON_ID("qspi",		&qspi_clk),
+	CLKDEV_CON_ID("cp",		&cp_clk),
+
+	/* DIV4 */
+	CLKDEV_CON_ID("sdh",		&div4_clks[DIV4_SDH]),
+	CLKDEV_CON_ID("sd0",		&div4_clks[DIV4_SD0]),
+	CLKDEV_CON_ID("sd1",		&div4_clks[DIV4_SD1]),
+
+	/* DIV6 */
+	CLKDEV_CON_ID("sd2",		&div6_clks[DIV6_SD2]),
+	CLKDEV_CON_ID("sd3",		&div6_clks[DIV6_SD3]),
+	CLKDEV_CON_ID("mmc0",		&div6_clks[DIV6_MMC0]),
+	CLKDEV_CON_ID("mmc1",		&div6_clks[DIV6_MMC1]),
+	CLKDEV_CON_ID("ssp",		&div6_clks[DIV6_SSP]),
+	CLKDEV_CON_ID("ssprs",		&div6_clks[DIV6_SSPRS]),
+
+	/* MSTP */
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
@@ -74,13 +251,60 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
 };
 
+#define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
+	extal_clk.rate	= e * 1000 * 1000;			\
+	main_clk.parent	= m;					\
+	SH_CLK_SET_RATIO(&pll1_clk_ratio, p1 / 2, 1);		\
+	if (mode & MD(19))					\
+		SH_CLK_SET_RATIO(&pll3_clk_ratio, p31, 1);	\
+	else							\
+		SH_CLK_SET_RATIO(&pll3_clk_ratio, p30, 1)
+
+
 void __init r8a7790_clock_init(void)
 {
+	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
+	u32 mode;
 	int k, ret = 0;
 
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	switch (mode & (MD(14) | MD(13))) {
+	case 0:
+		R8A7790_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
+		break;
+	case MD(13):
+		R8A7790_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66);
+		break;
+	case MD(14):
+		R8A7790_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102);
+		break;
+	case MD(13) | MD(14):
+		R8A7790_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88);
+		break;
+	}
+
+	if (mode & (MD(18)))
+		SH_CLK_SET_RATIO(&lb_clk_ratio, 1, 36);
+	else
+		SH_CLK_SET_RATIO(&lb_clk_ratio, 1, 24);
+
+	if ((mode & (MD(3) | MD(2) | MD(1))) == MD(2))
+		SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 16);
+	else
+		SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 20);
+
 	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
 		ret = clk_register(main_clks[k]);
 
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
 	if (!ret)
 		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
 

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -228,6 +228,11 @@ enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
 
 static struct clk div4_clks[DIV4_NR] = {
 	[DIV4_I] = DIV4(FRQCRA, 20, 0xdff, CLK_ENABLE_ON_INIT),
+	/*
+	 * ZG clock is dividing PLL0 frequency to supply SGX. Make sure not to
+	 * exceed maximum frequencies of 201.5MHz for VDD_DVFS=1.175 and
+	 * 239.2MHz for VDD_DVFS=1.315V.
+	 */
 	[DIV4_ZG] = SH_CLK_DIV4(&pll0_clk, FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT),
 	[DIV4_M3] = DIV4(FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT),
 	[DIV4_B] = DIV4(FRQCRA, 8, 0xdff, CLK_ENABLE_ON_INIT),
@@ -252,6 +257,101 @@ static struct clk twd_clk = {
 	.ops = &twd_clk_ops,
 };
 
+static struct sh_clk_ops zclk_ops, kicker_ops;
+static const struct sh_clk_ops *div4_clk_ops;
+
+static int zclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret;
+
+	if (!clk->parent || !__clk_get(clk->parent))
+		return -ENODEV;
+
+	if (readl(FRQCRB) & (1 << 31))
+		return -EBUSY;
+
+	if (rate == clk_get_rate(clk->parent)) {
+		/* 1:1 - switch off divider */
+		__raw_writel(__raw_readl(FRQCRB) & ~(1 << 28), FRQCRB);
+		/* nullify the divider to prepare for the next time */
+		ret = div4_clk_ops->set_rate(clk, rate / 2);
+		if (!ret)
+			ret = frqcr_kick();
+		if (ret > 0)
+			ret = 0;
+	} else {
+		/* Enable the divider */
+		__raw_writel(__raw_readl(FRQCRB) | (1 << 28), FRQCRB);
+
+		ret = frqcr_kick();
+		if (ret >= 0)
+			/*
+			 * set the divider - call the DIV4 method, it will kick
+			 * FRQCRB too
+			 */
+			ret = div4_clk_ops->set_rate(clk, rate);
+		if (ret < 0)
+			goto esetrate;
+	}
+
+esetrate:
+	__clk_put(clk->parent);
+	return ret;
+}
+
+static long zclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long div_freq = div4_clk_ops->round_rate(clk, rate),
+		parent_freq = clk_get_rate(clk->parent);
+
+	if (rate > div_freq && abs(parent_freq - rate) < rate - div_freq)
+		return parent_freq;
+
+	return div_freq;
+}
+
+static unsigned long zclk_recalc(struct clk *clk)
+{
+	/*
+	 * Must recalculate frequencies in case PLL0 has been changed, even if
+	 * the divisor is unused ATM!
+	 */
+	unsigned long div_freq = div4_clk_ops->recalc(clk);
+
+	if (__raw_readl(FRQCRB) & (1 << 28))
+		return div_freq;
+
+	return clk_get_rate(clk->parent);
+}
+
+static int kicker_set_rate(struct clk *clk, unsigned long rate)
+{
+	if (__raw_readl(FRQCRB) & (1 << 31))
+		return -EBUSY;
+
+	return div4_clk_ops->set_rate(clk, rate);
+}
+
+static void div4_clk_extend(void)
+{
+	int i;
+
+	div4_clk_ops = div4_clks[0].ops;
+
+	/* Add a kicker-busy check before changing the rate */
+	kicker_ops = *div4_clk_ops;
+	/* We extend the DIV4 clock with a 1:1 pass-through case */
+	zclk_ops = *div4_clk_ops;
+
+	kicker_ops.set_rate = kicker_set_rate;
+	zclk_ops.set_rate = zclk_set_rate;
+	zclk_ops.round_rate = zclk_round_rate;
+	zclk_ops.recalc = zclk_recalc;
+
+	for (i = 0; i < DIV4_NR; i++)
+		div4_clks[i].ops = i == DIV4_Z ? &zclk_ops : &kicker_ops;
+}
+
 enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1,
 	DIV6_FLCTL, DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2,
 	DIV6_FSIA, DIV6_FSIB, DIV6_SUB,
@@ -450,7 +550,7 @@ static struct clk *late_main_clks[] = {
 };
 
 enum { MSTP001,
-	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
+	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP112, MSTP100,
 	MSTP219, MSTP218, MSTP217,
 	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
 	MSTP331, MSTP329, MSTP328, MSTP325, MSTP323, MSTP322,
@@ -471,6 +571,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
 	[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */
 	[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
+	[MSTP112] = MSTP(&div4_clks[DIV4_ZG], SMSTPCR1, 12, 0), /* SGX */
 	[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
 	[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
 	[MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
@@ -513,6 +614,9 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("r_clk", &r_clk),
 	CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */
 
+	/* DIV4 clocks */
+	CLKDEV_DEV_ID("cpufreq-cpu0", &div4_clks[DIV4_Z]),
+
 	/* DIV6 clocks */
 	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
 	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
@@ -604,8 +708,11 @@ void __init sh73a0_clock_init(void)
 	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
 		ret = clk_register(main_clks[k]);
 
-	if (!ret)
+	if (!ret) {
 		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+		if (!ret)
+			div4_clk_extend();
+	}
 
 	if (!ret)
 		ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);

arch/arm/mach-shmobile/include/mach/clock.h

@@ -24,16 +24,16 @@ struct clk name = {			\
 }
 
 #define SH_FIXED_RATIO_CLK(name, p, r)		\
-static SH_FIXED_RATIO_CLKg(name, p, r);
+static SH_FIXED_RATIO_CLKg(name, p, r)
 
 #define SH_FIXED_RATIO_CLK_SET(name, p, m, d)	\
 	SH_CLK_RATIO(name, m, d);		\
-	SH_FIXED_RATIO_CLK(name, p, name);
+	SH_FIXED_RATIO_CLK(name, p, name)
 
 #define SH_CLK_SET_RATIO(p, m, d)	\
-{			\
+do {			\
 	(p)->mul = m;	\
 	(p)->div = d;	\
-}
+} while (0)
 
 #endif

arch/arm/mach-shmobile/include/mach/irqs.h

@@ -16,4 +16,9 @@
 #define IRQPIN_BASE		2000
 #define irq_pin(nr)		((nr) + IRQPIN_BASE)
 
+/* GPIO IRQ */
+#define _GPIO_IRQ_BASE		2500
+#define GPIO_IRQ_BASE(x)	(_GPIO_IRQ_BASE + (32 * x))
+#define GPIO_IRQ(x, y)		(_GPIO_IRQ_BASE + (32 * x) + y)
+
 #endif /* __ASM_MACH_IRQS_H */

arch/arm/mach-shmobile/include/mach/r8a7778.h

@@ -18,6 +18,7 @@
 #ifndef __ASM_R8A7778_H__
 #define __ASM_R8A7778_H__
 
+#include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/sh_eth.h>
 
 extern void r8a7778_add_standard_devices(void);
@@ -28,5 +29,7 @@ extern void r8a7778_init_irq(void);
 extern void r8a7778_init_irq_dt(void);
 extern void r8a7778_clock_init(void);
 extern void r8a7778_init_irq_extpin(int irlm);
+extern void r8a7778_pinmux_init(void);
+extern void r8a7778_sdhi_init(int id, struct sh_mobile_sdhi_info *info);
 
 #endif /* __ASM_R8A7778_H__ */

arch/arm/mach-shmobile/setup-r8a7740.c

@@ -70,29 +70,15 @@ void __init r8a7740_map_io(void)
 }
 
 /* PFC */
-static struct resource r8a7740_pfc_resources[] = {
-	[0] = {
-		.start	= 0xe6050000,
-		.end	= 0xe6057fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xe605800c,
-		.end	= 0xe605802b,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device r8a7740_pfc_device = {
-	.name		= "pfc-r8a7740",
-	.id		= -1,
-	.resource	= r8a7740_pfc_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_pfc_resources),
+static const struct resource pfc_resources[] = {
+	DEFINE_RES_MEM(0xe6050000, 0x8000),
+	DEFINE_RES_MEM(0xe605800c, 0x0020),
 };
 
 void __init r8a7740_pinmux_init(void)
 {
-	platform_device_register(&r8a7740_pfc_device);
+	platform_device_register_simple("pfc-r8a7740", -1, pfc_resources,
+					ARRAY_SIZE(pfc_resources));
 }
 
 static struct renesas_intc_irqpin_config irqpin0_platform_data = {

arch/arm/mach-shmobile/setup-r8a7778.c

@@ -24,6 +24,7 @@
 #include <linux/irqchip/arm-gic.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <linux/platform_device.h>
 #include <linux/irqchip.h>
@@ -80,12 +81,6 @@ static struct sh_timer_config sh_tmu1_platform_data = {
 	.clocksource_rating	= 200,
 };
 
-/* Ether */
-static struct resource ether_resources[] = {
-	DEFINE_RES_MEM(0xfde00000, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x89)),
-};
-
 #define r8a7778_register_tmu(idx)			\
 	platform_device_register_resndata(		\
 		&platform_bus, "sh_tmu", idx,		\
@@ -94,6 +89,90 @@ static struct resource ether_resources[] = {
 		&sh_tmu##idx##_platform_data,		\
 		sizeof(sh_tmu##idx##_platform_data))
 
+/* Ether */
+static struct resource ether_resources[] = {
+	DEFINE_RES_MEM(0xfde00000, 0x400),
+	DEFINE_RES_IRQ(gic_iid(0x89)),
+};
+
+void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata)
+{
+	platform_device_register_resndata(&platform_bus, "sh_eth", -1,
+					  ether_resources,
+					  ARRAY_SIZE(ether_resources),
+					  pdata, sizeof(*pdata));
+}
+
+/* PFC/GPIO */
+static struct resource pfc_resources[] = {
+	DEFINE_RES_MEM(0xfffc0000, 0x118),
+};
+
+#define R8A7778_GPIO(idx)						\
+static struct resource r8a7778_gpio##idx##_resources[] = {		\
+	DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30),		\
+	DEFINE_RES_IRQ(gic_iid(0x87)),					\
+};									\
+									\
+static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = {	\
+	.gpio_base	= 32 * (idx),					\
+	.irq_base	= GPIO_IRQ_BASE(idx),				\
+	.number_of_pins	= 32,						\
+	.pctl_name	= "pfc-r8a7778",				\
+}
+
+R8A7778_GPIO(0);
+R8A7778_GPIO(1);
+R8A7778_GPIO(2);
+R8A7778_GPIO(3);
+R8A7778_GPIO(4);
+
+#define r8a7778_register_gpio(idx)				\
+	platform_device_register_resndata(			\
+		&platform_bus, "gpio_rcar", idx,		\
+		r8a7778_gpio##idx##_resources,			\
+		ARRAY_SIZE(r8a7778_gpio##idx##_resources),	\
+		&r8a7778_gpio##idx##_platform_data,		\
+		sizeof(r8a7778_gpio##idx##_platform_data))
+
+void __init r8a7778_pinmux_init(void)
+{
+	platform_device_register_simple(
+		"pfc-r8a7778", -1,
+		pfc_resources,
+		ARRAY_SIZE(pfc_resources));
+
+	r8a7778_register_gpio(0);
+	r8a7778_register_gpio(1);
+	r8a7778_register_gpio(2);
+	r8a7778_register_gpio(3);
+	r8a7778_register_gpio(4);
+};
+
+/* SDHI */
+static struct resource sdhi_resources[] = {
+	/* SDHI0 */
+	DEFINE_RES_MEM(0xFFE4C000, 0x100),
+	DEFINE_RES_IRQ(gic_iid(0x77)),
+	/* SDHI1 */
+	DEFINE_RES_MEM(0xFFE4D000, 0x100),
+	DEFINE_RES_IRQ(gic_iid(0x78)),
+	/* SDHI2 */
+	DEFINE_RES_MEM(0xFFE4F000, 0x100),
+	DEFINE_RES_IRQ(gic_iid(0x76)),
+};
+
+void __init r8a7778_sdhi_init(int id,
+			      struct sh_mobile_sdhi_info *info)
+{
+	BUG_ON(id < 0 || id > 2);
+
+	platform_device_register_resndata(
+		&platform_bus, "sh_mobile_sdhi", id,
+		sdhi_resources + (2 * id), 2,
+		info, sizeof(*info));
+}
+
 void __init r8a7778_add_standard_devices(void)
 {
 	int i;
@@ -118,14 +197,6 @@ void __init r8a7778_add_standard_devices(void)
 	r8a7778_register_tmu(1);
 }
 
-void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata)
-{
-	platform_device_register_resndata(&platform_bus, "sh_eth", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  pdata, sizeof(*pdata));
-}
-
 static struct renesas_intc_irqpin_config irqpin_platform_data = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 	.sense_bitfield_width = 2,

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -65,11 +65,7 @@ void __init r8a7779_map_io(void)
 }
 
 static struct resource r8a7779_pfc_resources[] = {
-	[0] = {
-		.start	= 0xfffc0000,
-		.end	= 0xfffc023b,
-		.flags	= IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM(0xfffc0000, 0x023c),
 };
 
 static struct platform_device r8a7779_pfc_device = {
@@ -81,15 +77,8 @@ static struct platform_device r8a7779_pfc_device = {
 
 #define R8A7779_GPIO(idx, npins) \
 static struct resource r8a7779_gpio##idx##_resources[] = {		\
-	[0] = {								\
-		.start	= 0xffc40000 + 0x1000 * (idx),			\
-		.end	= 0xffc4002b + 0x1000 * (idx),			\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-	[1] = {								\
-		.start	= gic_iid(0xad + (idx)),			\
-		.flags	= IORESOURCE_IRQ,				\
-	}								\
+	DEFINE_RES_MEM(0xffc40000 + (0x1000 * (idx)), 0x002c),		\
+	DEFINE_RES_IRQ(gic_iid(0xad + (idx))),				\
 };									\
 									\
 static struct gpio_rcar_config r8a7779_gpio##idx##_platform_data = {	\

arch/arm/mach-shmobile/setup-r8a7790.c

@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/serial_sci.h>
+#include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
@@ -31,13 +32,46 @@
 
 static const struct resource pfc_resources[] = {
 	DEFINE_RES_MEM(0xe6060000, 0x250),
-	DEFINE_RES_MEM(0xe6050000, 0x5050),
 };
 
+#define R8A7790_GPIO(idx)						\
+static struct resource r8a7790_gpio##idx##_resources[] = {		\
+	DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50),		\
+	DEFINE_RES_IRQ(gic_spi(4 + (idx))),				\
+};									\
+									\
+static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data = {	\
+	.gpio_base	= 32 * (idx),					\
+	.irq_base	= 0,						\
+	.number_of_pins	= 32,						\
+	.pctl_name	= "pfc-r8a7790",				\
+	.has_both_edge_trigger = 1,					\
+};									\
+
+R8A7790_GPIO(0);
+R8A7790_GPIO(1);
+R8A7790_GPIO(2);
+R8A7790_GPIO(3);
+R8A7790_GPIO(4);
+R8A7790_GPIO(5);
+
+#define r8a7790_register_gpio(idx)					\
+	platform_device_register_resndata(&platform_bus, "gpio_rcar", idx, \
+		r8a7790_gpio##idx##_resources,				\
+		ARRAY_SIZE(r8a7790_gpio##idx##_resources),		\
+		&r8a7790_gpio##idx##_platform_data,			\
+		sizeof(r8a7790_gpio##idx##_platform_data))
+
 void __init r8a7790_pinmux_init(void)
 {
 	platform_device_register_simple("pfc-r8a7790", -1, pfc_resources,
 					ARRAY_SIZE(pfc_resources));
+	r8a7790_register_gpio(0);
+	r8a7790_register_gpio(1);
+	r8a7790_register_gpio(2);
+	r8a7790_register_gpio(3);
+	r8a7790_register_gpio(4);
+	r8a7790_register_gpio(5);
 }
 
 #define SCIF_COMMON(scif_type, baseaddr, irq)			\

arch/arm/mach-shmobile/setup-sh73a0.c

@@ -252,7 +252,7 @@ static struct sh_timer_config cmt10_platform_data = {
 	.name = "CMT10",
 	.channel_offset = 0x10,
 	.timer_bit = 0,
-	.clockevent_rating = 125,
+	.clockevent_rating = 80,
 	.clocksource_rating = 125,
 };
 
@@ -288,12 +288,7 @@ static struct sh_timer_config tmu00_platform_data = {
 };
 
 static struct resource tmu00_resources[] = {
-	[0] = {
-		.name	= "TMU00",
-		.start	= 0xfff60008,
-		.end	= 0xfff60013,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM_NAMED(0xfff60008, 0xc, "TMU00"),
 	[1] = {
 		.start	= intcs_evt2irq(0x0e80), /* TMU0_TUNI00 */
 		.flags	= IORESOURCE_IRQ,
@@ -318,12 +313,7 @@ static struct sh_timer_config tmu01_platform_data = {
 };
 
 static struct resource tmu01_resources[] = {
-	[0] = {
-		.name	= "TMU01",
-		.start	= 0xfff60014,
-		.end	= 0xfff6001f,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM_NAMED(0xfff60014, 0xc, "TMU00"),
 	[1] = {
 		.start	= intcs_evt2irq(0x0ea0), /* TMU0_TUNI01 */
 		.flags	= IORESOURCE_IRQ,
@@ -341,12 +331,7 @@ static struct platform_device tmu01_device = {
 };
 
 static struct resource i2c0_resources[] = {
-	[0] = {
-		.name	= "IIC0",
-		.start	= 0xe6820000,
-		.end	= 0xe6820425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM_NAMED(0xe6820000, 0x426, "IIC0"),
 	[1] = {
 		.start	= gic_spi(167),
 		.end	= gic_spi(170),
@@ -355,12 +340,7 @@ static struct resource i2c0_resources[] = {
 };
 
 static struct resource i2c1_resources[] = {
-	[0] = {
-		.name	= "IIC1",
-		.start	= 0xe6822000,
-		.end	= 0xe6822425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM_NAMED(0xe6822000, 0x426, "IIC1"),
 	[1] = {
 		.start	= gic_spi(51),
 		.end	= gic_spi(54),
@@ -369,12 +349,7 @@ static struct resource i2c1_resources[] = {
 };
 
 static struct resource i2c2_resources[] = {
-	[0] = {
-		.name	= "IIC2",
-		.start	= 0xe6824000,
-		.end	= 0xe6824425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM_NAMED(0xe6824000, 0x426, "IIC2"),
 	[1] = {
 		.start	= gic_spi(171),
 		.end	= gic_spi(174),
@@ -383,12 +358,7 @@ static struct resource i2c2_resources[] = {
 };
 
 static struct resource i2c3_resources[] = {
-	[0] = {
-		.name	= "IIC3",
-		.start	= 0xe6826000,
-		.end	= 0xe6826425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM_NAMED(0xe6826000, 0x426, "IIC3"),
 	[1] = {
 		.start	= gic_spi(183),
 		.end	= gic_spi(186),
@@ -397,12 +367,7 @@ static struct resource i2c3_resources[] = {
 };
 
 static struct resource i2c4_resources[] = {
-	[0] = {
-		.name	= "IIC4",
-		.start	= 0xe6828000,
-		.end	= 0xe6828425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM_NAMED(0xe6828000, 0x426, "IIC4"),
 	[1] = {
 		.start	= gic_spi(187),
 		.end	= gic_spi(190),
@@ -623,12 +588,7 @@ static struct sh_dmae_pdata sh73a0_dmae_platform_data = {
 };
 
 static struct resource sh73a0_dmae_resources[] = {
-	{
-		/* Registers including DMAOR and channels including DMARSx */
-		.start  = 0xfe000020,
-		.end    = 0xfe008a00 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM(0xfe000020, 0x89e0),
 	{
 		.name	= "error_irq",
 		.start  = gic_spi(129),
@@ -727,18 +687,10 @@ static struct sh_dmae_pdata sh73a0_mpdma_platform_data = {
 
 /* Resource order important! */
 static struct resource sh73a0_mpdma_resources[] = {
-	{
 	/* Channel registers and DMAOR */
-		.start	= 0xec618020,
-		.end	= 0xec61828f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
+	DEFINE_RES_MEM(0xec618020, 0x270),
 	/* DMARSx */
-		.start	= 0xec619000,
-		.end	= 0xec61900b,
-		.flags	= IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM(0xec619000, 0xc),
 	{
 		.name	= "error_irq",
 		.start	= gic_spi(181),
@@ -785,12 +737,7 @@ static struct platform_device pmu_device = {
 
 /* an IPMMU module for ICB */
 static struct resource ipmmu_resources[] = {
-	[0] = {
-		.name	= "IPMMU",
-		.start	= 0xfe951000,
-		.end	= 0xfe9510ff,
-		.flags	= IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM_NAMED(0xfe951000, 0x100, "IPMMU"),
 };
 
 static const char * const ipmmu_dev_names[] = {
@@ -982,11 +929,17 @@ void __init sh73a0_add_standard_devices(void)
 			    ARRAY_SIZE(sh73a0_late_devices));
 }
 
+void __init sh73a0_init_delay(void)
+{
+	shmobile_setup_delay(1196, 44, 46); /* Cortex-A9 @ 1196MHz */
+}
+
 /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
 void __init __weak sh73a0_register_twd(void) { }
 
 void __init sh73a0_earlytimer_init(void)
 {
+	sh73a0_init_delay();
 	sh73a0_clock_init();
 	shmobile_earlytimer_init();
 	sh73a0_register_twd();
@@ -1005,17 +958,14 @@ void __init sh73a0_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-void __init sh73a0_init_delay(void)
-{
-	shmobile_setup_delay(1196, 44, 46); /* Cortex-A9 @ 1196MHz */
-}
-
 static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = {
 	{},
 };
 
 void __init sh73a0_add_standard_devices_dt(void)
 {
+	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, };
+
 	/* clocks are setup late during boot in the case of DT */
 	sh73a0_clock_init();
 
@@ -1023,6 +973,9 @@ void __init sh73a0_add_standard_devices_dt(void)
 			     ARRAY_SIZE(sh73a0_devices_dt));
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     sh73a0_auxdata_lookup, NULL);
+
+	/* Instantiate cpufreq-cpu0 */
+	platform_device_register_full(&devinfo);
 }
 
 static const char *sh73a0_boards_compat_dt[] __initdata = {

drivers/gpio/gpio-rcar.c

@@ -49,6 +49,7 @@ struct gpio_rcar_priv {
 #define POSNEG 0x20
 #define EDGLEVEL 0x24
 #define FILONOFF 0x28
+#define BOTHEDGE 0x4c
 
 static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs)
 {
@@ -91,7 +92,8 @@ static void gpio_rcar_irq_enable(struct irq_data *d)
 static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
 						  unsigned int hwirq,
 						  bool active_high_rising_edge,
-						  bool level_trigger)
+						  bool level_trigger,
+						  bool both)
 {
 	unsigned long flags;
 
@@ -108,6 +110,10 @@ static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
 	/* Configure edge or level trigger in EDGLEVEL */
 	gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger);
 
+	/* Select one edge or both edges in BOTHEDGE */
+	if (p->config.has_both_edge_trigger)
+		gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both);
+
 	/* Select "Interrupt Input Mode" in IOINTSEL */
 	gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true);
 
@@ -127,16 +133,26 @@ static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
 
 	switch (type & IRQ_TYPE_SENSE_MASK) {
 	case IRQ_TYPE_LEVEL_HIGH:
-		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true);
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true,
+						      false);
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
-		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true);
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true,
+						      false);
 		break;
 	case IRQ_TYPE_EDGE_RISING:
-		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false);
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
+						      false);
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
-		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false);
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false,
+						      false);
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		if (!p->config.has_both_edge_trigger)
+			return -EINVAL;
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
+						      true);
 		break;
 	default:
 		return -EINVAL;
@@ -333,7 +349,7 @@ static int gpio_rcar_probe(struct platform_device *pdev)
 	}
 
 	if (devm_request_irq(&pdev->dev, irq->start,
-			     gpio_rcar_irq_handler, 0, name, p)) {
+			     gpio_rcar_irq_handler, IRQF_SHARED, name, p)) {
 		dev_err(&pdev->dev, "failed to request IRQ\n");
 		ret = -ENOENT;
 		goto err1;

drivers/pinctrl/sh-pfc/Kconfig

@@ -5,8 +5,6 @@
 if ARCH_SHMOBILE || SUPERH
 
 config PINCTRL_SH_PFC
-	# XXX move off the gpio dependency
-	depends on GPIOLIB
 	select GPIO_SH_PFC if ARCH_REQUIRE_GPIOLIB
 	select PINMUX
 	select PINCONF
@@ -32,11 +30,21 @@ config PINCTRL_PFC_R8A7740
 	depends on ARCH_R8A7740
 	select PINCTRL_SH_PFC
 
+config PINCTRL_PFC_R8A7778
+	def_bool y
+	depends on ARCH_R8A7778
+	select PINCTRL_SH_PFC
+
 config PINCTRL_PFC_R8A7779
 	def_bool y
 	depends on ARCH_R8A7779
 	select PINCTRL_SH_PFC
 
+config PINCTRL_PFC_R8A7790
+	def_bool y
+	depends on ARCH_R8A7790
+	select PINCTRL_SH_PFC
+
 config PINCTRL_PFC_SH7203
 	def_bool y
 	depends on CPU_SUBTYPE_SH7203
@@ -64,6 +72,7 @@ config PINCTRL_PFC_SH73A0
 	def_bool y
 	depends on ARCH_SH73A0
 	select PINCTRL_SH_PFC
+	select REGULATOR
 
 config PINCTRL_PFC_SH7720
 	def_bool y

drivers/pinctrl/sh-pfc/Makefile

@@ -5,7 +5,9 @@ endif
 obj-$(CONFIG_PINCTRL_SH_PFC)	+= sh-pfc.o
 obj-$(CONFIG_PINCTRL_PFC_R8A73A4)	+= pfc-r8a73a4.o
 obj-$(CONFIG_PINCTRL_PFC_R8A7740)	+= pfc-r8a7740.o
+obj-$(CONFIG_PINCTRL_PFC_R8A7778)	+= pfc-r8a7778.o
 obj-$(CONFIG_PINCTRL_PFC_R8A7779)	+= pfc-r8a7779.o
+obj-$(CONFIG_PINCTRL_PFC_R8A7790)	+= pfc-r8a7790.o
 obj-$(CONFIG_PINCTRL_PFC_SH7203)	+= pfc-sh7203.o
 obj-$(CONFIG_PINCTRL_PFC_SH7264)	+= pfc-sh7264.o
 obj-$(CONFIG_PINCTRL_PFC_SH7269)	+= pfc-sh7269.o

drivers/pinctrl/sh-pfc/core.c

@@ -372,6 +372,12 @@ static int sh_pfc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&pfc->lock);
 
+	if (info->ops && info->ops->init) {
+		ret = info->ops->init(pfc);
+		if (ret < 0)
+			return ret;
+	}
+
 	pinctrl_provide_dummies();
 
 	/*
@@ -379,7 +385,7 @@ static int sh_pfc_probe(struct platform_device *pdev)
 	 */
 	ret = sh_pfc_register_pinctrl(pfc);
 	if (unlikely(ret != 0))
-		return ret;
+		goto error;
 
 #ifdef CONFIG_GPIO_SH_PFC
 	/*
@@ -401,6 +407,11 @@ static int sh_pfc_probe(struct platform_device *pdev)
 	dev_info(pfc->dev, "%s support registered\n", info->name);
 
 	return 0;
+
+error:
+	if (info->ops && info->ops->exit)
+		info->ops->exit(pfc);
+	return ret;
 }
 
 static int sh_pfc_remove(struct platform_device *pdev)
@@ -412,6 +423,9 @@ static int sh_pfc_remove(struct platform_device *pdev)
 #endif
 	sh_pfc_unregister_pinctrl(pfc);
 
+	if (pfc->info->ops && pfc->info->ops->exit)
+		pfc->info->ops->exit(pfc);
+
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
@@ -424,9 +438,15 @@ static const struct platform_device_id sh_pfc_id_table[] = {
 #ifdef CONFIG_PINCTRL_PFC_R8A7740
 	{ "pfc-r8a7740", (kernel_ulong_t)&r8a7740_pinmux_info },
 #endif
+#ifdef CONFIG_PINCTRL_PFC_R8A7778
+	{ "pfc-r8a7778", (kernel_ulong_t)&r8a7778_pinmux_info },
+#endif
 #ifdef CONFIG_PINCTRL_PFC_R8A7779
 	{ "pfc-r8a7779", (kernel_ulong_t)&r8a7779_pinmux_info },
 #endif
+#ifdef CONFIG_PINCTRL_PFC_R8A7790
+	{ "pfc-r8a7790", (kernel_ulong_t)&r8a7790_pinmux_info },
+#endif
 #ifdef CONFIG_PINCTRL_PFC_SH7203
 	{ "pfc-sh7203", (kernel_ulong_t)&sh7203_pinmux_info },
 #endif

drivers/pinctrl/sh-pfc/core.h

@@ -11,6 +11,7 @@
 #define __SH_PFC_CORE_H__
 
 #include <linux/compiler.h>
+#include <linux/spinlock.h>
 #include <linux/types.h>
 
 #include "sh_pfc.h"
@@ -27,6 +28,7 @@ struct sh_pfc_pinctrl;
 struct sh_pfc {
 	struct device *dev;
 	const struct sh_pfc_soc_info *info;
+	void *soc_data;
 	spinlock_t lock;
 
 	unsigned int num_windows;
@@ -56,7 +58,9 @@ int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned mark, int pinmux_type);
 
 extern const struct sh_pfc_soc_info r8a73a4_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7740_pinmux_info;
+extern const struct sh_pfc_soc_info r8a7778_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7779_pinmux_info;
+extern const struct sh_pfc_soc_info r8a7790_pinmux_info;
 extern const struct sh_pfc_soc_info sh7203_pinmux_info;
 extern const struct sh_pfc_soc_info sh7264_pinmux_info;
 extern const struct sh_pfc_soc_info sh7269_pinmux_info;

drivers/pinctrl/sh-pfc/sh_pfc.h

@@ -11,8 +11,8 @@
 #ifndef __SH_PFC_H
 #define __SH_PFC_H
 
+#include <linux/bug.h>
 #include <linux/stringify.h>
-#include <asm-generic/gpio.h>
 
 typedef unsigned short pinmux_enum_t;
 
@@ -129,6 +129,8 @@ struct pinmux_range {
 struct sh_pfc;
 
 struct sh_pfc_soc_operations {
+	int (*init)(struct sh_pfc *pfc);
+	void (*exit)(struct sh_pfc *pfc);
 	unsigned int (*get_bias)(struct sh_pfc *pfc, unsigned int pin);
 	void (*set_bias)(struct sh_pfc *pfc, unsigned int pin,
 			 unsigned int bias);

include/linux/platform_data/gpio-rcar.h

@@ -17,10 +17,13 @@
 #define __GPIO_RCAR_H__
 
 struct gpio_rcar_config {
-	unsigned int gpio_base;
+	int gpio_base;
 	unsigned int irq_base;
 	unsigned int number_of_pins;
 	const char *pctl_name;
+	unsigned has_both_edge_trigger:1;
 };
 
+#define RCAR_GP_PIN(bank, pin)		(((bank) * 32) + (pin))
+
 #endif /* __GPIO_RCAR_H__ */