net: ethernet: mediatek: fix inconsistency of port number carried in TXD

Fix port inconsistency on TXD due to hardware BUG that would cause
different port number is carried on the same TXD between tx_map()
and tx_unmap() with the iperf test. It would cause confusing BQL
logic which leads to kernel panic when dual GMAC runs concurrently.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mediatek/mtk_eth_soc.c

@@ -648,6 +648,8 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev,
 
 	WRITE_ONCE(itxd->txd1, mapped_addr);
 	itx_buf->flags |= MTK_TX_FLAGS_SINGLE0;
+	itx_buf->flags |= (!mac->id) ? MTK_TX_FLAGS_FPORT0 :
+			  MTK_TX_FLAGS_FPORT1;
 	dma_unmap_addr_set(itx_buf, dma_addr0, mapped_addr);
 	dma_unmap_len_set(itx_buf, dma_len0, skb_headlen(skb));
 
@@ -689,6 +691,9 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev,
 			memset(tx_buf, 0, sizeof(*tx_buf));
 			tx_buf->skb = (struct sk_buff *)MTK_DMA_DUMMY_DESC;
 			tx_buf->flags |= MTK_TX_FLAGS_PAGE0;
+			tx_buf->flags |= (!mac->id) ? MTK_TX_FLAGS_FPORT0 :
+					 MTK_TX_FLAGS_FPORT1;
+
 			dma_unmap_addr_set(tx_buf, dma_addr0, mapped_addr);
 			dma_unmap_len_set(tx_buf, dma_len0, frag_map_size);
 			frag_size -= frag_map_size;
@@ -1011,17 +1016,16 @@ static int mtk_poll_tx(struct mtk_eth *eth, int budget)
 
 	while ((cpu != dma) && budget) {
 		u32 next_cpu = desc->txd2;
-		int mac;
+		int mac = 0;
 
 		desc = mtk_qdma_phys_to_virt(ring, desc->txd2);
 		if ((desc->txd3 & TX_DMA_OWNER_CPU) == 0)
 			break;
 
-		mac = (desc->txd4 >> TX_DMA_FPORT_SHIFT) &
-		       TX_DMA_FPORT_MASK;
-		mac--;
-
 		tx_buf = mtk_desc_to_tx_buf(ring, desc);
+		if (tx_buf->flags & MTK_TX_FLAGS_FPORT1)
+			mac = 1;
+
 		skb = tx_buf->skb;
 		if (!skb) {
 			condition = 1;

drivers/net/ethernet/mediatek/mtk_eth_soc.h

@@ -406,12 +406,18 @@ struct mtk_hw_stats {
 	struct u64_stats_sync	syncp;
 };
 
-/* PDMA descriptor can point at 1-2 segments. This enum allows us to track how
- * memory was allocated so that it can be freed properly
- */
 enum mtk_tx_flags {
+	/* PDMA descriptor can point at 1-2 segments. This enum allows us to
+	 * track how memory was allocated so that it can be freed properly.
+	 */
 	MTK_TX_FLAGS_SINGLE0	= 0x01,
 	MTK_TX_FLAGS_PAGE0	= 0x02,
+
+	/* MTK_TX_FLAGS_FPORTx allows tracking which port the transmitted
+	 * SKB out instead of looking up through hardware TX descriptor.
+	 */
+	MTK_TX_FLAGS_FPORT0	= 0x04,
+	MTK_TX_FLAGS_FPORT1	= 0x08,
 };
 
 /* This enum allows us to identify how the clock is defined on the array of the