Commit 145a40e8 authored by Heiner Kallweit's avatar Heiner Kallweit Committed by David S. Miller

r8169: remove struct rtl_cfg_info

Simplify the code by removing struct rtl_cfg_info. Only info we need
per PCI ID is whether it supports GBit or not.
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9fa0a8e1
......@@ -73,6 +73,8 @@ static const int multicast_filter_limit = 32;
#define R8169_TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc))
#define R8169_RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc))
#define RTL_CFG_NO_GBIT 1
/* write/read MMIO register */
#define RTL_W8(tp, reg, val8) writeb((val8), tp->mmio_addr + (reg))
#define RTL_W16(tp, reg, val16) writew((val16), tp->mmio_addr + (reg))
......@@ -200,32 +202,26 @@ static const struct {
[RTL_GIGA_MAC_VER_51] = {"RTL8168ep/8111ep" },
};
enum cfg_version {
RTL_CFG_0 = 0x00,
RTL_CFG_1,
RTL_CFG_2
};
static const struct pci_device_id rtl8169_pci_tbl[] = {
{ PCI_VDEVICE(REALTEK, 0x2502), RTL_CFG_1 },
{ PCI_VDEVICE(REALTEK, 0x2600), RTL_CFG_1 },
{ PCI_VDEVICE(REALTEK, 0x8129), RTL_CFG_0 },
{ PCI_VDEVICE(REALTEK, 0x8136), RTL_CFG_2 },
{ PCI_VDEVICE(REALTEK, 0x8161), RTL_CFG_1 },
{ PCI_VDEVICE(REALTEK, 0x8167), RTL_CFG_0 },
{ PCI_VDEVICE(REALTEK, 0x8168), RTL_CFG_1 },
{ PCI_VDEVICE(NCUBE, 0x8168), RTL_CFG_1 },
{ PCI_VDEVICE(REALTEK, 0x8169), RTL_CFG_0 },
{ PCI_VDEVICE(REALTEK, 0x2502) },
{ PCI_VDEVICE(REALTEK, 0x2600) },
{ PCI_VDEVICE(REALTEK, 0x8129) },
{ PCI_VDEVICE(REALTEK, 0x8136), RTL_CFG_NO_GBIT },
{ PCI_VDEVICE(REALTEK, 0x8161) },
{ PCI_VDEVICE(REALTEK, 0x8167) },
{ PCI_VDEVICE(REALTEK, 0x8168) },
{ PCI_VDEVICE(NCUBE, 0x8168) },
{ PCI_VDEVICE(REALTEK, 0x8169) },
{ PCI_VENDOR_ID_DLINK, 0x4300,
PCI_VENDOR_ID_DLINK, 0x4b10, 0, 0, RTL_CFG_1 },
{ PCI_VDEVICE(DLINK, 0x4300), RTL_CFG_0 },
{ PCI_VDEVICE(DLINK, 0x4302), RTL_CFG_0 },
{ PCI_VDEVICE(AT, 0xc107), RTL_CFG_0 },
{ PCI_VDEVICE(USR, 0x0116), RTL_CFG_0 },
PCI_VENDOR_ID_DLINK, 0x4b10, 0, 0 },
{ PCI_VDEVICE(DLINK, 0x4300), },
{ PCI_VDEVICE(DLINK, 0x4302), },
{ PCI_VDEVICE(AT, 0xc107), },
{ PCI_VDEVICE(USR, 0x0116), },
{ PCI_VENDOR_ID_LINKSYS, 0x1032,
PCI_ANY_ID, 0x0024, 0, 0, RTL_CFG_0 },
PCI_ANY_ID, 0x0024, 0, 0 },
{ 0x0001, 0x8168,
PCI_ANY_ID, 0x2410, 0, 0, RTL_CFG_2 },
PCI_ANY_ID, 0x2410, 0, 0, RTL_CFG_NO_GBIT },
{}
};
......@@ -6459,19 +6455,6 @@ static const struct net_device_ops rtl_netdev_ops = {
};
static const struct rtl_cfg_info {
unsigned int has_gmii:1;
} rtl_cfg_infos [] = {
[RTL_CFG_0] = {
.has_gmii = 1,
},
[RTL_CFG_1] = {
.has_gmii = 1,
},
[RTL_CFG_2] = {
}
};
static void rtl_set_irq_mask(struct rtl8169_private *tp)
{
tp->irq_mask = RTL_EVENT_NAPI | LinkChg;
......@@ -6695,7 +6678,6 @@ static int rtl_get_ether_clk(struct rtl8169_private *tp)
static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data;
/* align to u16 for is_valid_ether_addr() */
u8 mac_addr[ETH_ALEN] __aligned(2) = {};
struct rtl8169_private *tp;
......@@ -6713,7 +6695,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
tp->dev = dev;
tp->pci_dev = pdev;
tp->msg_enable = netif_msg_init(debug.msg_enable, R8169_MSG_DEFAULT);
tp->supports_gmii = cfg->has_gmii;
tp->supports_gmii = ent->driver_data == RTL_CFG_NO_GBIT ? 0 : 1;
/* Get the *optional* external "ether_clk" used on some boards */
rc = rtl_get_ether_clk(tp);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment