Commit 1556f4b4 authored by Olof Johansson's avatar Olof Johansson

Merge tag 'davinci-for-v3.10/board-2-v2' of...

Merge tag 'davinci-for-v3.10/board-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/boards

From Sekhar Nori:
v3.10 board updates for DaVinci

This set of patches enables remoteproc support
on DA850 EVM and fixes some sparse warnings for
the same board.

* tag 'davinci-for-v3.10/board-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da850 evm: fix const qualifier placement
  ARM: davinci: da850 board: add remoteproc support
  ARM: davinci: ensure global variables are declared
  ARM: davinci: sram.c: fix incorrect type in assignment
  ARM: davinci: da8xx dt: make file local symbols static
  ARM: davinci: da8xx: add remoteproc support
  ARM: davinci: remove test for undefined Kconfig macro
  ARM: davinci: mmc: derive version information from device name
  ARM: davinci: da850: add ECAP & EHRPWM clock nodes
  ARM: davinci: clk framework support for enable/disable functionality
parents 392f9195 58b6c5a1
......@@ -44,6 +44,7 @@ parameter is applicable:
AVR32 AVR32 architecture is enabled.
AX25 Appropriate AX.25 support is enabled.
BLACKFIN Blackfin architecture is enabled.
CMA Contiguous Memory Area support is enabled.
DRM Direct Rendering Management support is enabled.
DYNAMIC_DEBUG Build in debug messages and enable them at runtime
EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
......@@ -2663,6 +2664,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Useful for devices that are detected asynchronously
(e.g. USB and MMC devices).
rproc_mem=nn[KMG][@address]
[KNL,ARM,CMA] Remoteproc physical memory block.
Memory area to be used by remote processor image,
managed by CMA.
rw [KNL] Mount root device read-write on boot
S [KNL] Run init in single mode
......
......@@ -246,7 +246,6 @@ static struct davinci_mmc_config da830_evm_mmc_config = {
.wires = 8,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_2,
};
static inline void da830_evm_init_mmc(void)
......
......@@ -396,7 +396,7 @@ enum da850_evm_ui_exp_pins {
DA850_EVM_UI_EXP_PB1,
};
static const char const *da850_evm_ui_exp[] = {
static const char * const da850_evm_ui_exp[] = {
[DA850_EVM_UI_EXP_SEL_C] = "sel_c",
[DA850_EVM_UI_EXP_SEL_B] = "sel_b",
[DA850_EVM_UI_EXP_SEL_A] = "sel_a",
......@@ -560,7 +560,7 @@ enum da850_evm_bb_exp_pins {
DA850_EVM_BB_EXP_USER_SW8
};
static const char const *da850_evm_bb_exp[] = {
static const char * const da850_evm_bb_exp[] = {
[DA850_EVM_BB_EXP_DEEP_SLEEP_EN] = "deep_sleep_en",
[DA850_EVM_BB_EXP_SW_RST] = "sw_rst",
[DA850_EVM_BB_EXP_TP_23] = "tp_23",
......@@ -797,7 +797,6 @@ static struct davinci_mmc_config da850_mmc_config = {
.wires = 4,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_2,
};
static const short da850_evm_mmcsd0_pins[] __initconst = {
......@@ -1367,7 +1366,6 @@ static struct davinci_mmc_config da850_wl12xx_mmc_config = {
.max_freq = 25000000,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_POWER_OFF_CARD,
.version = MMC_CTLR_VERSION_2,
};
static const short da850_wl12xx_pins[] __initconst = {
......@@ -1574,6 +1572,11 @@ static __init void da850_evm_init(void)
pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
da850_evm_setup_mac_addr();
ret = da8xx_register_rproc();
if (ret)
pr_warn("%s: dsp/rproc registration failed: %d\n",
__func__, ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
......@@ -1601,4 +1604,5 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = da8xx_restart,
.reserve = da8xx_rproc_reserve_cma,
MACHINE_END
......@@ -280,7 +280,6 @@ static struct davinci_mmc_config dm355evm_mmc_config = {
.wires = 4,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_1,
};
/* Don't connect anything to J10 unless you're only using USB host
......
......@@ -253,7 +253,6 @@ static struct davinci_mmc_config dm365evm_mmc_config = {
.wires = 4,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_2,
};
static void dm365evm_emac_configure(void)
......
......@@ -570,7 +570,6 @@ static struct davinci_mmc_config dm6446evm_mmc_config = {
.get_cd = dm6444evm_mmc_get_cd,
.get_ro = dm6444evm_mmc_get_ro,
.wires = 4,
.version = MMC_CTLR_VERSION_1
};
static struct i2c_board_info __initdata i2c_info[] = {
......
......@@ -164,7 +164,6 @@ static void __init davinci_ntosd2_map_io(void)
static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
.wires = 4,
.version = MMC_CTLR_VERSION_1
};
#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
......
......@@ -136,7 +136,6 @@ static struct davinci_mmc_config da850_mmc_config = {
.wires = 4,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_2,
};
static __init void omapl138_hawk_mmc_init(void)
......@@ -311,6 +310,11 @@ static __init void omapl138_hawk_init(void)
if (ret)
pr_warn("%s: watchdog registration failed: %d\n",
__func__, ret);
ret = da8xx_register_rproc();
if (ret)
pr_warn("%s: dsp/rproc registration failed: %d\n",
__func__, ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
......@@ -338,4 +342,5 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
.restart = da8xx_restart,
.reserve = da8xx_rproc_reserve_cma,
MACHINE_END
......@@ -85,7 +85,6 @@ static struct davinci_mmc_config mmc_config = {
.wires = 4,
.max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_1,
};
static const short sdio1_pins[] __initconst = {
......
......@@ -35,19 +35,26 @@ static void __clk_enable(struct clk *clk)
{
if (clk->parent)
__clk_enable(clk->parent);
if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
if (clk->usecount++ == 0) {
if (clk->flags & CLK_PSC)
davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
true, clk->flags);
else if (clk->clk_enable)
clk->clk_enable(clk);
}
}
static void __clk_disable(struct clk *clk)
{
if (WARN_ON(clk->usecount == 0))
return;
if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
(clk->flags & CLK_PSC))
if (--clk->usecount == 0) {
if (!(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC))
davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
false, clk->flags);
else if (clk->clk_disable)
clk->clk_disable(clk);
}
if (clk->parent)
__clk_disable(clk->parent);
}
......
......@@ -104,6 +104,8 @@ struct clk {
int (*set_rate) (struct clk *clk, unsigned long rate);
int (*round_rate) (struct clk *clk, unsigned long rate);
int (*reset) (struct clk *clk, bool reset);
void (*clk_enable) (struct clk *clk);
void (*clk_disable) (struct clk *clk);
};
/* Clock flags: SoC-specific flags start at BIT(16) */
......
......@@ -394,7 +394,7 @@ static struct clk_lookup da830_clks[] = {
CLK(NULL, "tpcc", &tpcc_clk),
CLK(NULL, "tptc0", &tptc0_clk),
CLK(NULL, "tptc1", &tptc1_clk),
CLK("davinci_mmc.0", NULL, &mmcsd_clk),
CLK("da830-mmc.0", NULL, &mmcsd_clk),
CLK(NULL, "uart0", &uart0_clk),
CLK(NULL, "uart1", &uart1_clk),
CLK(NULL, "uart2", &uart2_clk),
......
......@@ -383,6 +383,49 @@ static struct clk dsp_clk = {
.flags = PSC_LRST | PSC_FORCE,
};
static struct clk ehrpwm_clk = {
.name = "ehrpwm",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_PWM,
.gpsc = 1,
.flags = DA850_CLK_ASYNC3,
};
#define DA8XX_EHRPWM_TBCLKSYNC BIT(12)
static void ehrpwm_tblck_enable(struct clk *clk)
{
u32 val;
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
val |= DA8XX_EHRPWM_TBCLKSYNC;
writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
}
static void ehrpwm_tblck_disable(struct clk *clk)
{
u32 val;
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
val &= ~DA8XX_EHRPWM_TBCLKSYNC;
writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
}
static struct clk ehrpwm_tbclk = {
.name = "ehrpwm_tbclk",
.parent = &ehrpwm_clk,
.clk_enable = ehrpwm_tblck_enable,
.clk_disable = ehrpwm_tblck_disable,
};
static struct clk ecap_clk = {
.name = "ecap",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_ECAP,
.gpsc = 1,
.flags = DA850_CLK_ASYNC3,
};
static struct clk_lookup da850_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "pll0", &pll0_clk),
......@@ -420,8 +463,8 @@ static struct clk_lookup da850_clks[] = {
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("davinci-mcasp.0", NULL, &mcasp_clk),
CLK("da8xx_lcdc.0", "fck", &lcdc_clk),
CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
CLK(NULL, "aemif", &aemif_clk),
CLK(NULL, "usb11", &usb11_clk),
CLK(NULL, "usb20", &usb20_clk),
......@@ -430,6 +473,9 @@ static struct clk_lookup da850_clks[] = {
CLK("vpif", NULL, &vpif_clk),
CLK("ahci", NULL, &sata_clk),
CLK("davinci-rproc.0", NULL, &dsp_clk),
CLK("ehrpwm", "fck", &ehrpwm_clk),
CLK("ehrpwm", "tbclk", &ehrpwm_tbclk),
CLK("ecap", "fck", &ecap_clk),
CLK(NULL, NULL, NULL),
};
......
......@@ -20,7 +20,7 @@
#define DA8XX_NUM_UARTS 3
void __init da8xx_uart_clk_enable(void)
static void __init da8xx_uart_clk_enable(void)
{
int i;
for (i = 0; i < DA8XX_NUM_UARTS; i++)
......@@ -37,7 +37,7 @@ static void __init da8xx_init_irq(void)
of_irq_init(da8xx_irq_match);
}
struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL),
{}
......
......@@ -12,7 +12,7 @@
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/dma-contiguous.h>
#include <linux/serial_8250.h>
#include <linux/ahci_platform.h>
#include <linux/clk.h>
......@@ -664,7 +664,7 @@ static struct resource da8xx_mmcsd0_resources[] = {
};
static struct platform_device da8xx_mmcsd0_device = {
.name = "davinci_mmc",
.name = "da830-mmc",
.id = 0,
.num_resources = ARRAY_SIZE(da8xx_mmcsd0_resources),
.resource = da8xx_mmcsd0_resources,
......@@ -701,7 +701,7 @@ static struct resource da850_mmcsd1_resources[] = {
};
static struct platform_device da850_mmcsd1_device = {
.name = "davinci_mmc",
.name = "da830-mmc",
.id = 1,
.num_resources = ARRAY_SIZE(da850_mmcsd1_resources),
.resource = da850_mmcsd1_resources,
......@@ -714,6 +714,92 @@ int __init da850_register_mmcsd1(struct davinci_mmc_config *config)
}
#endif
static struct resource da8xx_rproc_resources[] = {
{ /* DSP boot address */
.start = DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG,
.end = DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG + 3,
.flags = IORESOURCE_MEM,
},
{ /* DSP interrupt registers */
.start = DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG,
.end = DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG + 7,
.flags = IORESOURCE_MEM,
},
{ /* dsp irq */
.start = IRQ_DA8XX_CHIPINT0,
.end = IRQ_DA8XX_CHIPINT0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da8xx_dsp = {
.name = "davinci-rproc",
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(da8xx_rproc_resources),
.resource = da8xx_rproc_resources,
};
#if IS_ENABLED(CONFIG_DA8XX_REMOTEPROC)
static phys_addr_t rproc_base __initdata;
static unsigned long rproc_size __initdata;
static int __init early_rproc_mem(char *p)
{
char *endp;
if (p == NULL)
return 0;
rproc_size = memparse(p, &endp);
if (*endp == '@')
rproc_base = memparse(endp + 1, NULL);
return 0;
}
early_param("rproc_mem", early_rproc_mem);
void __init da8xx_rproc_reserve_cma(void)
{
int ret;
if (!rproc_base || !rproc_size) {
pr_err("%s: 'rproc_mem=nn@address' badly specified\n"
" 'nn' and 'address' must both be non-zero\n",
__func__);
return;
}
pr_info("%s: reserving 0x%lx @ 0x%lx...\n",
__func__, rproc_size, (unsigned long)rproc_base);
ret = dma_declare_contiguous(&da8xx_dsp.dev, rproc_size, rproc_base, 0);
if (ret)
pr_err("%s: dma_declare_contiguous failed %d\n", __func__, ret);
}
#else
void __init da8xx_rproc_reserve_cma(void)
{
}
#endif
int __init da8xx_register_rproc(void)
{
int ret;
ret = platform_device_register(&da8xx_dsp);
if (ret)
pr_err("%s: can't register DSP device: %d\n", __func__, ret);
return ret;
};
static struct resource da8xx_rtc_resources[] = {
{
.start = DA8XX_RTC_BASE,
......
......@@ -218,7 +218,7 @@ static u64 mmc1_dma_mask = DMA_BIT_MASK(32);
static struct platform_device mmc_devices[2] = {
{
.name = "davinci_mmc",
.name = "dm6441-mmc",
.id = 0,
.dev = {
.dma_mask = &mmc0_dma_mask,
......@@ -228,7 +228,7 @@ static struct platform_device mmc_devices[2] = {
.resource = mmc0_resources
},
{
.name = "davinci_mmc",
.name = "dm6441-mmc",
.id = 1,
.dev = {
.dma_mask = &mmc1_dma_mask,
......
......@@ -150,7 +150,7 @@ static struct resource mmcsd0_resources[] = {
};
static struct platform_device davinci_mmcsd0_device = {
.name = "davinci_mmc",
.name = "dm6441-mmc",
.id = 0,
.dev = {
.dma_mask = &mmcsd0_dma_mask,
......@@ -187,7 +187,7 @@ static struct resource mmcsd1_resources[] = {
};
static struct platform_device davinci_mmcsd1_device = {
.name = "davinci_mmc",
.name = "dm6441-mmc",
.id = 1,
.dev = {
.dma_mask = &mmcsd1_dma_mask,
......@@ -235,6 +235,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
SZ_4K - 1;
mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1;
davinci_mmcsd1_device.name = "da830-mmc";
} else
break;
......@@ -256,6 +257,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
SZ_4K - 1;
mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0;
davinci_mmcsd0_device.name = "da830-mmc";
} else if (cpu_is_davinci_dm644x()) {
/* REVISIT: should this be in board-init code? */
/* Power-on 3.3V IO cells */
......
......@@ -361,8 +361,8 @@ static struct clk_lookup dm355_clks[] = {
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("davinci-mcbsp.0", NULL, &asp0_clk),
CLK("davinci-mcbsp.1", NULL, &asp1_clk),
CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
CLK("dm6441-mmc.0", NULL, &mmcsd0_clk),
CLK("dm6441-mmc.1", NULL, &mmcsd1_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK("spi_davinci.2", NULL, &spi2_clk),
......
......@@ -454,8 +454,8 @@ static struct clk_lookup dm365_clks[] = {
CLK(NULL, "uart0", &uart0_clk),
CLK(NULL, "uart1", &uart1_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK("spi_davinci.2", NULL, &spi2_clk),
......
......@@ -310,7 +310,7 @@ static struct clk_lookup dm644x_clks[] = {
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("palm_bk3710", NULL, &ide_clk),
CLK("davinci-mcbsp", NULL, &asp_clk),
CLK("davinci_mmc.0", NULL, &mmcsd_clk),
CLK("dm6441-mmc.0", NULL, &mmcsd_clk),
CLK(NULL, "spi", &spi_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK(NULL, "usb", &usb_clk),
......
......@@ -54,7 +54,10 @@ extern unsigned int da850_max_speed;
#define DA8XX_SYSCFG0_BASE (IO_PHYS + 0x14000)
#define DA8XX_SYSCFG0_VIRT(x) (da8xx_syscfg0_base + (x))
#define DA8XX_JTAG_ID_REG 0x18
#define DA8XX_HOST1CFG_REG 0x44
#define DA8XX_CHIPSIG_REG 0x174
#define DA8XX_CFGCHIP0_REG 0x17c
#define DA8XX_CFGCHIP1_REG 0x180
#define DA8XX_CFGCHIP2_REG 0x184
#define DA8XX_CFGCHIP3_REG 0x188
......@@ -104,6 +107,8 @@ int __init da850_register_vpif_display
int __init da850_register_vpif_capture
(struct vpif_capture_config *capture_config);
void da8xx_restart(char mode, const char *cmd);
void da8xx_rproc_reserve_cma(void);
int da8xx_register_rproc(void);
extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;
......
......@@ -24,8 +24,6 @@
#if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0)
#define UART_BASE DAVINCI_UART0_BASE
#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART0)
#define UART_BASE DA8XX_UART0_BASE
#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1)
#define UART_BASE DA8XX_UART1_BASE
#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2)
......
......@@ -19,6 +19,7 @@
#include <asm/delay.h>
#include <asm/io.h>
#include <mach/common.h>
#include <mach/da8xx.h>
#include <mach/sram.h>
#include <mach/pm.h>
......
......@@ -62,7 +62,7 @@ static int __init sram_init(void)
phys_addr_t phys = davinci_soc_info.sram_dma;
unsigned len = davinci_soc_info.sram_len;
int status = 0;
void *addr;
void __iomem *addr;
if (len) {
len = min_t(unsigned, len, SRAM_SIZE);
......@@ -75,7 +75,7 @@ static int __init sram_init(void)
addr = ioremap(phys, len);
if (!addr)
return -ENOMEM;
status = gen_pool_add_virt(sram_pool, (unsigned)addr,
status = gen_pool_add_virt(sram_pool, (unsigned long) addr,
phys, len, -1);
if (status < 0)
iounmap(addr);
......
......@@ -272,7 +272,7 @@ static struct clk_lookup clks[] = {
CLK("tnetv107x-keypad.0", NULL, &clk_keypad),
CLK(NULL, "clk_gpio", &clk_gpio),
CLK(NULL, "clk_mdio", &clk_mdio),
CLK("davinci_mmc.0", NULL, &clk_sdio0),
CLK("dm6441-mmc.0", NULL, &clk_sdio0),
CLK(NULL, "uart0", &clk_uart0),
CLK(NULL, "uart1", &clk_uart1),
CLK(NULL, "timer0", &clk_timer0),
......@@ -292,7 +292,7 @@ static struct clk_lookup clks[] = {
CLK(NULL, "clk_system", &clk_system),
CLK(NULL, "clk_imcop", &clk_imcop),
CLK(NULL, "clk_spare", &clk_spare),
CLK("davinci_mmc.1", NULL, &clk_sdio1),
CLK("dm6441-mmc.1", NULL, &clk_sdio1),
CLK(NULL, "clk_ddr2_vrst", &clk_ddr2_vrst),
CLK(NULL, "clk_ddr2_vctl_rst", &clk_ddr2_vctl_rst),
CLK(NULL, NULL, NULL),
......
......@@ -10,6 +10,7 @@
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/da8xx.h>
#include <linux/platform_data/usb-davinci.h>
#define DAVINCI_USB_OTG_BASE 0x01c64000
......
......@@ -1157,6 +1157,18 @@ static void __init init_mmcsd_host(struct mmc_davinci_host *host)
mmc_davinci_reset_ctrl(host, 0);
}
static struct platform_device_id davinci_mmc_devtype[] = {
{
.name = "dm6441-mmc",
.driver_data = MMC_CTLR_VERSION_1,
}, {
.name = "da830-mmc",
.driver_data = MMC_CTLR_VERSION_2,
},
{},
};
MODULE_DEVICE_TABLE(platform, davinci_mmc_devtype);
static int __init davinci_mmcsd_probe(struct platform_device *pdev)
{
struct davinci_mmc_config *pdata = pdev->dev.platform_data;
......@@ -1165,6 +1177,7 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev)
struct resource *r, *mem = NULL;
int ret = 0, irq = 0;
size_t mem_size;
const struct platform_device_id *id_entry;
/* REVISIT: when we're fully converted, fail if pdata is NULL */
......@@ -1237,7 +1250,9 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev)
if (pdata && (pdata->wires == 8))
mmc->caps |= (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA);
host->version = pdata->version;
id_entry = platform_get_device_id(pdev);
if (id_entry)
host->version = id_entry->driver_data;
mmc->ops = &mmc_davinci_ops;
mmc->f_min = 312500;
......@@ -1408,6 +1423,7 @@ static struct platform_driver davinci_mmcsd_driver = {
.pm = davinci_mmcsd_pm_ops,
},
.remove = __exit_p(davinci_mmcsd_remove),
.id_table = davinci_mmc_devtype,
};
static int __init davinci_mmcsd_init(void)
......
......@@ -23,9 +23,6 @@ struct davinci_mmc_config {
/* any additional host capabilities: OR'd in to mmc->f_caps */
u32 caps;
/* Version of the MMC/SD controller */
u8 version;
/* Number of sg segments */
u8 nr_sg;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment