Commit 1562864f authored by Roger Quadros's avatar Roger Quadros Committed by Kishon Vijay Abraham I

phy: ti-pipe3: cleanup clock handling

As this driver is no longer USB specific, use generic clock names.
- Fix PLL_SD_SHIFT from 9 to 10
- Don't separate prepare/unprepare clock from enable/disable. This
  ensures optimal power savings.
Signed-off-by: default avatarRoger Quadros <rogerq@ti.com>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parent 51c9f4ad
......@@ -45,7 +45,7 @@
#define PLL_SELFREQDCO_MASK 0x0000000E
#define PLL_SELFREQDCO_SHIFT 0x1
#define PLL_SD_MASK 0x0003FC00
#define PLL_SD_SHIFT 0x9
#define PLL_SD_SHIFT 10
#define SET_PLL_GO 0x1
#define PLL_TICOPWDN 0x10000
#define PLL_LOCK 0x2
......@@ -72,7 +72,7 @@ struct ti_pipe3 {
struct device *control_dev;
struct clk *wkupclk;
struct clk *sys_clk;
struct clk *optclk;
struct clk *refclk;
};
struct pipe3_dpll_map {
......@@ -270,23 +270,21 @@ static int ti_pipe3_probe(struct platform_device *pdev)
phy->dev = &pdev->dev;
phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
dev_err(&pdev->dev, "unable to get wkupclk\n");
return PTR_ERR(phy->wkupclk);
}
clk_prepare(phy->wkupclk);
phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
if (IS_ERR(phy->optclk)) {
dev_err(&pdev->dev, "unable to get usb_otg_ss_refclk960m\n");
return PTR_ERR(phy->optclk);
phy->refclk = devm_clk_get(phy->dev, "refclk");
if (IS_ERR(phy->refclk)) {
dev_err(&pdev->dev, "unable to get refclk\n");
return PTR_ERR(phy->refclk);
}
clk_prepare(phy->optclk);
phy->sys_clk = devm_clk_get(phy->dev, "sys_clkin");
phy->sys_clk = devm_clk_get(phy->dev, "sysclk");
if (IS_ERR(phy->sys_clk)) {
pr_err("%s: unable to get sys_clkin\n", __func__);
dev_err(&pdev->dev, "unable to get sysclk\n");
return -EINVAL;
}
......@@ -326,10 +324,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
static int ti_pipe3_remove(struct platform_device *pdev)
{
struct ti_pipe3 *phy = platform_get_drvdata(pdev);
clk_unprepare(phy->wkupclk);
clk_unprepare(phy->optclk);
if (!pm_runtime_suspended(&pdev->dev))
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
......@@ -343,8 +337,10 @@ static int ti_pipe3_runtime_suspend(struct device *dev)
{
struct ti_pipe3 *phy = dev_get_drvdata(dev);
clk_disable(phy->wkupclk);
clk_disable(phy->optclk);
if (!IS_ERR(phy->wkupclk))
clk_disable_unprepare(phy->wkupclk);
if (!IS_ERR(phy->refclk))
clk_disable_unprepare(phy->refclk);
return 0;
}
......@@ -354,22 +350,27 @@ static int ti_pipe3_runtime_resume(struct device *dev)
u32 ret = 0;
struct ti_pipe3 *phy = dev_get_drvdata(dev);
ret = clk_enable(phy->optclk);
if (!IS_ERR(phy->refclk)) {
ret = clk_prepare_enable(phy->refclk);
if (ret) {
dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
goto err1;
}
}
ret = clk_enable(phy->wkupclk);
if (!IS_ERR(phy->wkupclk)) {
ret = clk_prepare_enable(phy->wkupclk);
if (ret) {
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
goto err2;
}
}
return 0;
err2:
clk_disable(phy->optclk);
if (!IS_ERR(phy->refclk))
clk_disable_unprepare(phy->refclk);
err1:
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment