scsi: smartpqi: ensure controller is in SIS mode at init

put in SIS mode during initialization.
support kexec/kdump
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/smartpqi/smartpqi.h

@@ -964,7 +964,7 @@ struct pqi_ctrl_info {
 };
 
 enum pqi_ctrl_mode {
-	UNKNOWN,
+	SIS_MODE = 0,
 	PQI_MODE
 };
 

drivers/scsi/smartpqi/smartpqi_init.c

@@ -5245,38 +5245,50 @@ static int pqi_get_ctrl_firmware_version(struct pqi_ctrl_info *ctrl_info)
 	return rc;
 }
 
-static int pqi_kdump_init(struct pqi_ctrl_info *ctrl_info)
+/* Switches the controller from PQI mode back into SIS mode. */
+
+static int pqi_revert_to_sis_mode(struct pqi_ctrl_info *ctrl_info)
 {
-	if (!sis_is_firmware_running(ctrl_info))
-		return -ENXIO;
+	int rc;
 
-	if (pqi_get_ctrl_mode(ctrl_info) == PQI_MODE) {
 	sis_disable_msix(ctrl_info);
-		if (pqi_reset(ctrl_info) == 0)
+	rc = pqi_reset(ctrl_info);
+	if (rc)
+		return rc;
 	sis_reenable_sis_mode(ctrl_info);
-	}
+	pqi_save_ctrl_mode(ctrl_info, SIS_MODE);
 
 	return 0;
 }
 
+/*
+ * If the controller isn't already in SIS mode, this function forces it into
+ * SIS mode.
+ */
+
+static int pqi_force_sis_mode(struct pqi_ctrl_info *ctrl_info)
+{
+	if (!sis_is_firmware_running(ctrl_info))
+		return -ENXIO;
+
+	if (pqi_get_ctrl_mode(ctrl_info) == SIS_MODE)
+		return 0;
+
+	if (sis_is_kernel_up(ctrl_info)) {
+		pqi_save_ctrl_mode(ctrl_info, SIS_MODE);
+		return 0;
+	}
+
+	return pqi_revert_to_sis_mode(ctrl_info);
+}
+
 static int pqi_ctrl_init(struct pqi_ctrl_info *ctrl_info)
 {
 	int rc;
 
-	if (reset_devices) {
-		rc = pqi_kdump_init(ctrl_info);
+	rc = pqi_force_sis_mode(ctrl_info);
 	if (rc)
 		return rc;
-	}
-
-	/*
-	 * When the controller comes out of reset, it is always running
-	 * in legacy SIS mode.  This is so that it can be compatible
-	 * with legacy drivers shipped with OSes.  So we have to talk
-	 * to it using SIS commands at first.  Once we are satisified
-	 * that the controller supports PQI, we transition it into PQI
-	 * mode.
-	 */
 
 	/*
 	 * Wait until the controller is ready to start accepting SIS
@@ -5594,12 +5606,8 @@ static void pqi_remove_ctrl(struct pqi_ctrl_info *ctrl_info)
 	cancel_delayed_work_sync(&ctrl_info->update_time_work);
 	pqi_remove_all_scsi_devices(ctrl_info);
 	pqi_unregister_scsi(ctrl_info);
-
-	if (ctrl_info->pqi_mode_enabled) {
-		sis_disable_msix(ctrl_info);
-		if (pqi_reset(ctrl_info) == 0)
-			sis_reenable_sis_mode(ctrl_info);
-	}
+	if (ctrl_info->pqi_mode_enabled)
+		pqi_revert_to_sis_mode(ctrl_info);
 	pqi_free_ctrl_resources(ctrl_info);
 }
 

drivers/scsi/smartpqi/smartpqi_sis.c

@@ -127,6 +127,12 @@ bool sis_is_firmware_running(struct pqi_ctrl_info *ctrl_info)
 	return running;
 }
 
+bool sis_is_kernel_up(struct pqi_ctrl_info *ctrl_info)
+{
+	return readl(&ctrl_info->registers->sis_firmware_status) &
+				SIS_CTRL_KERNEL_UP;
+}
+
 /* used for passing command parameters/results when issuing SIS commands */
 struct sis_sync_cmd_params {
 	u32	mailbox[6];	/* mailboxes 0-5 */

drivers/scsi/smartpqi/smartpqi_sis.h

@@ -21,6 +21,7 @@
 
 int sis_wait_for_ctrl_ready(struct pqi_ctrl_info *ctrl_info);
 bool sis_is_firmware_running(struct pqi_ctrl_info *ctrl_info);
+bool sis_is_kernel_up(struct pqi_ctrl_info *ctrl_info);
 int sis_get_ctrl_properties(struct pqi_ctrl_info *ctrl_info);
 int sis_get_pqi_capabilities(struct pqi_ctrl_info *ctrl_info);
 int sis_init_base_struct_addr(struct pqi_ctrl_info *ctrl_info);