Merge branch 'next/devel' of git://git.linaro.org/people/arnd/arm-soc

* 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits)
  ARM: tegra: update defconfig
  arm/tegra: Harmony: Configure PMC for low-level interrupts
  arm/tegra: device tree support for ventana board
  arm/tegra: add support for ventana pinmuxing
  arm/tegra: prepare Seaboard pinmux code for derived boards
  arm/tegra: pinmux: ioremap registers
  gpio/tegra: Convert to a platform device
  arm/tegra: Convert pinmux driver to a platform device
  arm/dt: Tegra: Add pinmux node to tegra20.dtsi
  arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
  ARM: mx5: fix clock usage for suspend
  ARM i.MX entry-macro.S: remove now unused code
  ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER
  ARM i.MX tzic: add handle_irq function
  ARM i.MX avic: add handle_irq function
  ARM: mx25: Add the missing IIM base definition
  ARM i.MX avic: convert to use generic irq chip
  mx31moboard: Add poweroff support
  ARM: mach-qong: Add watchdog support
  ARM: davinci: AM18x: Add wl1271/wlan support
  ...

Fix up conflicts in:
	arch/arm/mach-at91/at91sam9g45.c
	arch/arm/mach-mx5/devices-imx53.h
	arch/arm/plat-mxc/include/mach/memory.h

Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt

+NVIDIA Tegra 2 pinmux controller
+
+Required properties:
+- compatible : "nvidia,tegra20-pinmux"
+

arch/arm/Kconfig

@@ -417,6 +417,7 @@ config ARCH_MXC
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
 	select HAVE_SCHED_CLOCK
+	select MULTI_IRQ_HANDLER
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 

arch/arm/Makefile

@@ -157,9 +157,7 @@ machine-$(CONFIG_ARCH_LPC32XX)		:= lpc32xx
 machine-$(CONFIG_ARCH_MMP)		:= mmp
 machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
-machine-$(CONFIG_ARCH_MX1)		:= imx
-machine-$(CONFIG_ARCH_MX2)		:= imx
-machine-$(CONFIG_ARCH_MX25)		:= imx
+machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
 machine-$(CONFIG_ARCH_MX3)		:= imx
 machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXS)		:= mxs

arch/arm/boot/dts/tegra-ventana.dts

+/dts-v1/;
+
+/memreserve/ 0x1c000000 0x04000000;
+/include/ "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra2 Ventana evaluation board";
+	compatible = "nvidia,ventana", "nvidia,tegra20";
+
+	chosen {
+		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/ram rdinit=/sbin/init";
+	};
+
+	memory {
+		reg = < 0x00000000 0x40000000 >;
+	};
+
+	serial@70006300 {
+		clock-frequency = < 216000000 >;
+	};
+
+	sdhci@c8000400 {
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+	};
+
+	sdhci@c8000600 {
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		support-8bit;
+	};
+};

arch/arm/boot/dts/tegra20.dtsi

@@ -77,6 +77,14 @@ gpio: gpio@6000d000 {
 		gpio-controller;
 	};
 
+	pinmux: pinmux@70000000 {
+		compatible = "nvidia,tegra20-pinmux";
+		reg = < 0x70000014 0x10    /* Tri-state registers */
+			0x70000080 0x20    /* Mux registers */
+			0x700000a0 0x14    /* Pull-up/down registers */
+			0x70000868 0xa8 >; /* Pad control registers */
+	};
+
 	serial@70006000 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006000 0x40>;

arch/arm/configs/mx27_defconfig → arch/arm/configs/imx_v4_v5_defconfig

@@ -3,9 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
@@ -17,8 +15,12 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX2=y
-CONFIG_MACH_MX27=y
+CONFIG_ARCH_IMX_V4_V5=y
+CONFIG_ARCH_MX1ADS=y
+CONFIG_MACH_SCB9328=y
+CONFIG_MACH_MX21ADS=y
+CONFIG_MACH_MX25_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX25=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_CPUIMX27=y
@@ -29,6 +31,7 @@ CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_IMX27LITE=y
 CONFIG_MACH_PCA100=y
 CONFIG_MACH_MXT_TD60=y
+CONFIG_MACH_IMX27IPCAM=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
@@ -39,7 +42,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -55,8 +57,9 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -69,12 +72,15 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
-CONFIG_FEC=y
+CONFIG_SMC91X=y
+CONFIG_DM9000=y
+CONFIG_SMC911X=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -84,10 +90,10 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -98,19 +104,56 @@ CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_MC13XXX=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_MC13783=y
+CONFIG_REGULATOR_MC13892=y
 CONFIG_FB=y
 CONFIG_FB_IMX=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=m
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_MX27VIS_AIC32X4=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB_HID=m
+CONFIG_USB=y
 # CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_ULPI=y
 CONFIG_MMC=y
 CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_MC13783=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_IMXDI=y
+CONFIG_RTC_MXC=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
+CONFIG_IMX_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_TMPFS=y
@@ -119,12 +162,9 @@ CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
-CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/arm/configs/mx1_defconfig

-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX1=y
-CONFIG_ARCH_MX1ADS=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_IMX=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/arm/configs/mx21_defconfig

-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX2=y
-CONFIG_MACH_MX21ADS=y
-CONFIG_MXC_PWM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_IMX=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/arm/configs/mx51_defconfig → arch/arm/configs/mx5_defconfig

 CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_RELAY=y
@@ -13,21 +14,29 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX51=y
+CONFIG_ARCH_MX5=y
 CONFIG_MACH_MX51_BABBAGE=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51=y
+CONFIG_MACH_EUKREA_CPUIMX51SD=y
+CONFIG_MACH_MX51_EFIKAMX=y
+CONFIG_MACH_MX51_EFIKASB=y
+CONFIG_MACH_MX53_EVK=y
+CONFIG_MACH_MX53_SMD=y
+CONFIG_MACH_MX53_LOCO=y
+CONFIG_MACH_MX53_ARD=y
+CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_TEST_SUSPEND=y
 CONFIG_NET=y
@@ -42,13 +51,13 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 CONFIG_CONNECTOR=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
@@ -56,8 +65,10 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
 # CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=m
+CONFIG_ATA=y
+CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
+CONFIG_MII=m
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_QSEMI_PHY=y
@@ -71,49 +82,57 @@ CONFIG_REALTEK_PHY=y
 CONFIG_NATIONAL_PHY=y
 CONFIG_STE10XP=y
 CONFIG_LSI_ET1011C_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_GPIO=y
+CONFIG_MICREL_PHY=y
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_FEC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MMA8450=y
 CONFIG_SERIO_SERPORT=m
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_I2C_ALGOBIT=m
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_MC13XXX=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_MC13892=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK=m
-CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_MXC=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -127,7 +146,6 @@ CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_ISO9660_FS=m
@@ -151,17 +169,13 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 # CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
 CONFIG_SECURITYFS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_CCITT=m

arch/arm/configs/tegra_defconfig

@@ -25,6 +25,7 @@ CONFIG_MACH_KAEN=y
 CONFIG_MACH_PAZ00=y
 CONFIG_MACH_TRIMSLICE=y
 CONFIG_MACH_WARIO=y
+CONFIG_MACH_VENTANA=y
 CONFIG_TEGRA_DEBUG_UARTD=y
 CONFIG_ARM_ERRATA_742230=y
 CONFIG_NO_HZ=y
@@ -38,7 +39,6 @@ CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_VFP=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -65,6 +65,7 @@ CONFIG_IPV6_TUNNEL=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
 # CONFIG_WIRELESS is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_MISC_DEVICES=y
 CONFIG_AD525X_DPOT=y
@@ -72,34 +73,61 @@ CONFIG_AD525X_DPOT_I2C=y
 CONFIG_ICS932S401=y
 CONFIG_APDS9802ALS=y
 CONFIG_ISL29003=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_NET_ETHERNET=y
 CONFIG_R8169=y
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
 # CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_I2C_TEGRA=y
+CONFIG_SPI=y
+CONFIG_SPI_TEGRA=y
 CONFIG_SENSORS_LM90=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_TPS6586X=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_TEGRA=y
+CONFIG_SND_SOC_TEGRA_WM8903=y
+CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_TEGRA=y
 CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
 CONFIG_IIO=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_SENSORS_AK8975=y
@@ -123,18 +151,15 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_SG=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_ECB=y

arch/arm/mach-at91/at91cap9.c

@@ -219,6 +219,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	/* fake hclk clock */
+	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {

arch/arm/mach-at91/at91cap9_devices.c

@@ -80,6 +80,12 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 			at91_set_gpio_output(data->vbus_pin[i], 0);
 	}
 
+	/* Enable overcurrent notification */
+	for (i = 0; i < data->ports; i++) {
+		if (data->overcurrent_pin[i])
+			at91_set_gpio_input(data->overcurrent_pin[i], 1);
+	}
+
 	usbh_data = *data;
 	platform_device_register(&at91_usbh_device);
 }

arch/arm/mach-at91/at91rm9200.c

@@ -193,6 +193,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+	/* fake hclk clock */
+	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {

arch/arm/mach-at91/at91rm9200_devices.c

@@ -60,9 +60,17 @@ static struct platform_device at91rm9200_usbh_device = {
 
 void __init at91_add_device_usbh(struct at91_usbh_data *data)
 {
+	int i;
+
 	if (!data)
 		return;
 
+	/* Enable overcurrent notification */
+	for (i = 0; i < data->ports; i++) {
+		if (data->overcurrent_pin[i])
+			at91_set_gpio_input(data->overcurrent_pin[i], 1);
+	}
+
 	usbh_data = *data;
 	platform_device_register(&at91rm9200_usbh_device);
 }

arch/arm/mach-at91/at91sam9260.c

@@ -199,6 +199,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
+	/* fake hclk clock */
+	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {

arch/arm/mach-at91/at91sam9260_devices.c

@@ -61,9 +61,17 @@ static struct platform_device at91_usbh_device = {
 
 void __init at91_add_device_usbh(struct at91_usbh_data *data)
 {
+	int i;
+
 	if (!data)
 		return;
 
+	/* Enable overcurrent notification */
+	for (i = 0; i < data->ports; i++) {
+		if (data->overcurrent_pin[i])
+			at91_set_gpio_input(data->overcurrent_pin[i], 1);
+	}
+
 	usbh_data = *data;
 	platform_device_register(&at91_usbh_device);
 }

arch/arm/mach-at91/at91sam9261.c

@@ -129,6 +129,20 @@ static struct clk lcdc_clk = {
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 
+/* HClocks */
+static struct clk hck0 = {
+	.name		= "hck0",
+	.pmc_mask	= AT91_PMC_HCK0,
+	.type		= CLK_TYPE_SYSTEM,
+	.id		= 0,
+};
+static struct clk hck1 = {
+	.name		= "hck1",
+	.pmc_mask	= AT91_PMC_HCK1,
+	.type		= CLK_TYPE_SYSTEM,
+	.id		= 1,
+};
+
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
 	&pioB_clk,
@@ -161,6 +175,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -199,20 +214,6 @@ static struct clk pck3 = {
 	.id		= 3,
 };
 
-/* HClocks */
-static struct clk hck0 = {
-	.name		= "hck0",
-	.pmc_mask	= AT91_PMC_HCK0,
-	.type		= CLK_TYPE_SYSTEM,
-	.id		= 0,
-};
-static struct clk hck1 = {
-	.name		= "hck1",
-	.pmc_mask	= AT91_PMC_HCK1,
-	.type		= CLK_TYPE_SYSTEM,
-	.id		= 1,
-};
-
 static void __init at91sam9261_register_clocks(void)
 {
 	int i;

arch/arm/mach-at91/at91sam9261_devices.c

@@ -64,9 +64,17 @@ static struct platform_device at91sam9261_usbh_device = {
 
 void __init at91_add_device_usbh(struct at91_usbh_data *data)
 {
+	int i;
+
 	if (!data)
 		return;
 
+	/* Enable overcurrent notification */
+	for (i = 0; i < data->ports; i++) {
+		if (data->overcurrent_pin[i])
+			at91_set_gpio_input(data->overcurrent_pin[i], 1);
+	}
+
 	usbh_data = *data;
 	platform_device_register(&at91sam9261_usbh_device);
 }

arch/arm/mach-at91/at91sam9263.c

@@ -189,6 +189,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+	/* fake hclk clock */
+	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {

arch/arm/mach-at91/at91sam9263_devices.c

@@ -74,6 +74,12 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 			at91_set_gpio_output(data->vbus_pin[i], 0);
 	}
 
+	/* Enable overcurrent notification */
+	for (i = 0; i < data->ports; i++) {
+		if (data->overcurrent_pin[i])
+			at91_set_gpio_input(data->overcurrent_pin[i], 1);
+	}
+
 	usbh_data = *data;
 	platform_device_register(&at91_usbh_device);
 }

arch/arm/mach-at91/at91sam9g45.c

@@ -223,6 +223,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 	CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
+	/* fake hclk clock */
+	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -124,6 +124,12 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
 			at91_set_gpio_output(data->vbus_pin[i], 0);
 	}
 
+	/* Enable overcurrent notification */
+	for (i = 0; i < data->ports; i++) {
+		if (data->overcurrent_pin[i])
+			at91_set_gpio_input(data->overcurrent_pin[i], 1);
+	}
+
 	usbh_ohci_data = *data;
 	platform_device_register(&at91_usbh_ohci_device);
 }

arch/arm/mach-at91/include/mach/board.h

@@ -98,6 +98,11 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data);
 struct at91_usbh_data {
 	u8		ports;		/* number of ports on root hub */
 	u8		vbus_pin[2];	/* port power-control pin */
+	u8              vbus_pin_inverted;
+	u8              overcurrent_supported;
+	u8              overcurrent_pin[2];
+	u8              overcurrent_status[2];
+	u8              overcurrent_changed[2];
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);

arch/arm/mach-davinci/Kconfig

@@ -192,6 +192,16 @@ config DA850_UI_RMII
 
 endchoice
 
+config DA850_WL12XX
+	bool "AM18x wl1271 daughter board"
+	depends on MACH_DAVINCI_DA850_EVM
+	help
+	  The wl1271 daughter card for AM18x EVMs is a combo wireless
+	  connectivity add-on card, based on the LS Research TiWi module with
+	  Texas Instruments' wl1271 solution.
+	  Say Y if you want to use a wl1271 expansion card connected to the
+	  AM18x EVM.
+
 config GPIO_PCA953X
 	default MACH_DAVINCI_DA850_EVM
 

arch/arm/mach-davinci/board-da850-evm.c

@@ -31,6 +31,8 @@
 #include <linux/input/tps6507x-ts.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/delay.h>
+#include <linux/wl12xx.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -49,6 +51,9 @@
 #define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
 
+#define DA850_WLAN_EN			GPIO_TO_PIN(6, 9)
+#define DA850_WLAN_IRQ			GPIO_TO_PIN(6, 10)
+
 #define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
 
 static struct mtd_partition da850evm_spiflash_part[] = {
@@ -1143,6 +1148,110 @@ static __init int da850_evm_init_cpufreq(void)
 static __init int da850_evm_init_cpufreq(void) { return 0; }
 #endif
 
+#ifdef CONFIG_DA850_WL12XX
+
+static void wl12xx_set_power(int index, bool power_on)
+{
+	static bool power_state;
+
+	pr_debug("Powering %s wl12xx", power_on ? "on" : "off");
+
+	if (power_on == power_state)
+		return;
+	power_state = power_on;
+
+	if (power_on) {
+		/* Power up sequence required for wl127x devices */
+		gpio_set_value(DA850_WLAN_EN, 1);
+		usleep_range(15000, 15000);
+		gpio_set_value(DA850_WLAN_EN, 0);
+		usleep_range(1000, 1000);
+		gpio_set_value(DA850_WLAN_EN, 1);
+		msleep(70);
+	} else {
+		gpio_set_value(DA850_WLAN_EN, 0);
+	}
+}
+
+static struct davinci_mmc_config da850_wl12xx_mmc_config = {
+	.set_power	= wl12xx_set_power,
+	.wires		= 4,
+	.max_freq	= 25000000,
+	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
+			  MMC_CAP_POWER_OFF_CARD,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
+static const short da850_wl12xx_pins[] __initconst = {
+	DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2,
+	DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD,
+	DA850_GPIO6_9, DA850_GPIO6_10,
+	-1
+};
+
+static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
+	.irq			= -1,
+	.board_ref_clock	= WL12XX_REFCLOCK_38,
+	.platform_quirks	= WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
+};
+
+static __init int da850_wl12xx_init(void)
+{
+	int ret;
+
+	ret = davinci_cfg_reg_list(da850_wl12xx_pins);
+	if (ret) {
+		pr_err("wl12xx/mmc mux setup failed: %d\n", ret);
+		goto exit;
+	}
+
+	ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config);
+	if (ret) {
+		pr_err("wl12xx/mmc registration failed: %d\n", ret);
+		goto exit;
+	}
+
+	ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en");
+	if (ret) {
+		pr_err("Could not request wl12xx enable gpio: %d\n", ret);
+		goto exit;
+	}
+
+	ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq");
+	if (ret) {
+		pr_err("Could not request wl12xx irq gpio: %d\n", ret);
+		goto free_wlan_en;
+	}
+
+	da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ);
+
+	ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data);
+	if (ret) {
+		pr_err("Could not set wl12xx data: %d\n", ret);
+		goto free_wlan_irq;
+	}
+
+	return 0;
+
+free_wlan_irq:
+	gpio_free(DA850_WLAN_IRQ);
+
+free_wlan_en:
+	gpio_free(DA850_WLAN_EN);
+
+exit:
+	return ret;
+}
+
+#else /* CONFIG_DA850_WL12XX */
+
+static __init int da850_wl12xx_init(void)
+{
+	return 0;
+}
+
+#endif /* CONFIG_DA850_WL12XX */
+
 #define DA850EVM_SATA_REFCLKPN_RATE	(100 * 1000 * 1000)
 
 static __init void da850_evm_init(void)
@@ -1197,6 +1306,11 @@ static __init void da850_evm_init(void)
 		if (ret)
 			pr_warning("da850_evm_init: mmcsd0 registration failed:"
 					" %d\n", ret);
+
+		ret = da850_wl12xx_init();
+		if (ret)
+			pr_warning("da850_evm_init: wl12xx initialization"
+				   " failed: %d\n", ret);
 	}
 
 	davinci_serial_init(&da850_evm_uart_config);

arch/arm/mach-davinci/da850.c

@@ -536,6 +536,13 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, MMCSD0_DAT_3,	10,	20,	15,	2,	false)
 	MUX_CFG(DA850, MMCSD0_CLK,	10,	0,	15,	2,	false)
 	MUX_CFG(DA850, MMCSD0_CMD,	10,	4,	15,	2,	false)
+	/* MMC/SD1 function */
+	MUX_CFG(DA850, MMCSD1_DAT_0,	18,	8,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_DAT_1,	19,	16,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_DAT_2,	19,	12,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_DAT_3,	19,	8,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_CLK,	18,	12,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD1_CMD,	18,	16,	15,	2,	false)
 	/* EMIF2.5/EMIFA function */
 	MUX_CFG(DA850, EMA_D_7,		9,	0,	15,	1,	false)
 	MUX_CFG(DA850, EMA_D_6,		9,	4,	15,	1,	false)
@@ -594,6 +601,8 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, GPIO3_13,	7,	8,	15,	8,	false)
 	MUX_CFG(DA850, GPIO4_0,		10,	28,	15,	8,	false)
 	MUX_CFG(DA850, GPIO4_1,		10,	24,	15,	8,	false)
+	MUX_CFG(DA850, GPIO6_9,		13,	24,	15,	8,	false)
+	MUX_CFG(DA850, GPIO6_10,	13,	20,	15,	8,	false)
 	MUX_CFG(DA850, GPIO6_13,	13,	8,	15,	8,	false)
 	MUX_CFG(DA850, RTC_ALARM,	0,	28,	15,	2,	false)
 #endif

arch/arm/mach-davinci/include/mach/mmc.h

@@ -12,6 +12,9 @@ struct davinci_mmc_config {
 	/* get_cd()/get_wp() may sleep */
 	int	(*get_cd)(int module);
 	int	(*get_ro)(int module);
+
+	void	(*set_power)(int module, bool on);
+
 	/* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
 	u8	wires;
 

arch/arm/mach-davinci/include/mach/mux.h

@@ -857,6 +857,14 @@ enum davinci_da850_index {
 	DA850_MMCSD0_CLK,
 	DA850_MMCSD0_CMD,
 
+	/* MMC/SD1 function */
+	DA850_MMCSD1_DAT_0,
+	DA850_MMCSD1_DAT_1,
+	DA850_MMCSD1_DAT_2,
+	DA850_MMCSD1_DAT_3,
+	DA850_MMCSD1_CLK,
+	DA850_MMCSD1_CMD,
+
 	/* EMIF2.5/EMIFA function */
 	DA850_EMA_D_7,
 	DA850_EMA_D_6,
@@ -916,6 +924,8 @@ enum davinci_da850_index {
 	DA850_GPIO3_13,
 	DA850_GPIO4_0,
 	DA850_GPIO4_1,
+	DA850_GPIO6_9,
+	DA850_GPIO6_10,
 	DA850_GPIO6_13,
 	DA850_RTC_ALARM,
 };

arch/arm/mach-imx/Kconfig

@@ -5,6 +5,18 @@ config IMX_HAVE_DMA_V1
 # Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
 # To easily distinguish good and reviewed from unreviewed usages new (and IMHO
 # more sensible) names are used: SOC_IMX31 and SOC_IMX35
+config ARCH_MX1
+	bool
+
+config MACH_MX21
+	bool
+
+config ARCH_MX25
+	bool
+
+config MACH_MX27
+	bool
+
 config ARCH_MX31
 	bool
 
@@ -13,6 +25,7 @@ config ARCH_MX35
 
 config SOC_IMX1
 	bool
+	select ARCH_MX1
 	select CPU_ARM920T
 	select IMX_HAVE_DMA_V1
 	select IMX_HAVE_IOMUX_V1
@@ -20,6 +33,7 @@ config SOC_IMX1
 
 config SOC_IMX21
 	bool
+	select MACH_MX21
 	select CPU_ARM926T
 	select ARCH_MXC_AUDMUX_V1
 	select IMX_HAVE_DMA_V1
@@ -28,6 +42,7 @@ config SOC_IMX21
 
 config SOC_IMX25
 	bool
+	select ARCH_MX25
 	select CPU_ARM926T
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_MXC_IOMUX_V3
@@ -35,6 +50,7 @@ config SOC_IMX25
 
 config SOC_IMX27
 	bool
+	select MACH_MX27
 	select CPU_ARM926T
 	select ARCH_MXC_AUDMUX_V1
 	select IMX_HAVE_DMA_V1
@@ -59,7 +75,7 @@ config SOC_IMX35
 	select MXC_AVIC
 
 
-if ARCH_MX1
+if ARCH_IMX_V4_V5
 
 comment "MX1 platforms:"
 config MACH_MXLADS
@@ -87,30 +103,6 @@ config MACH_APF9328
 	help
 	  Say Yes here if you are using the Armadeus APF9328 development board
 
-endif
-
-if ARCH_MX2
-
-choice
-	prompt "CPUs:"
-	default MACH_MX21
-
-config MACH_MX21
-	bool "i.MX21 support"
-	help
-	  This enables support for Freescale's MX2 based i.MX21 processor.
-
-config MACH_MX27
-	bool "i.MX27 support"
-	help
-	  This enables support for Freescale's MX2 based i.MX27 processor.
-
-endchoice
-
-endif
-
-if MACH_MX21
-
 comment "MX21 platforms:"
 
 config MACH_MX21ADS
@@ -124,15 +116,12 @@ config MACH_MX21ADS
 	  Include support for MX21ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
-endif
-
-if ARCH_MX25
-
 comment "MX25 platforms:"
 
 config MACH_MX25_3DS
 	bool "Support MX25PDK (3DS) Platform"
 	select SOC_IMX25
+	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMXDI_RTC
@@ -174,10 +163,6 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD
 
 endchoice
 
-endif
-
-if MACH_MX27
-
 comment "MX27 platforms:"
 
 config MACH_MX27ADS
@@ -486,6 +471,7 @@ config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
 	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
 	  specific configurations for the board and its peripherals.

arch/arm/mach-imx/Makefile

@@ -3,7 +3,7 @@ obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
 obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o
 
-obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
 
 obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o

arch/arm/mach-imx/clock-imx25.c

@@ -263,6 +263,7 @@ DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
 DEFINE_CLOCK(csi_clk,    0, CCM_CGCR1,  4, get_rate_csi, NULL,  &csi_per_clk);
 DEFINE_CLOCK(can1_clk,	 0, CCM_CGCR1,  2, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(can2_clk,	 1, CCM_CGCR1,  3, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(iim_clk,    0, CCM_CGCR1, 26, NULL, NULL, NULL);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -310,6 +311,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
 	/* i.mx25 has the i.mx35 type sdma */
 	_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
+	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 };
 
 int __init mx25_clocks_init(void)
@@ -334,6 +336,10 @@ int __init mx25_clocks_init(void)
 	/* Clock source for gpt is ahb_div */
 	__raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
 
+	clk_enable(&iim_clk);
+	imx_print_silicon_rev("i.MX25", mx25_revision());
+	clk_disable(&iim_clk);
+
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
 	return 0;

arch/arm/mach-imx/clock-imx27.c

@@ -751,6 +751,8 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&gpio_clk);
 	clk_enable(&emi_clk);
 	clk_enable(&iim_clk);
+	imx_print_silicon_rev("i.MX27", mx27_revision());
+	clk_disable(&iim_clk);
 
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	clk_enable(&uart1_clk);

arch/arm/mach-imx/clock-imx31.c

@@ -611,11 +611,11 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_enable(&gpt_clk);
 	clk_enable(&emi_clk);
 	clk_enable(&iim_clk);
+	mx31_revision();
+	clk_disable(&iim_clk);
 
 	clk_enable(&serial_pll_clk);
 
-	mx31_read_cpu_rev();
-
 	if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
 		reg = __raw_readl(MXC_CCM_PMCR1);
 		/* No PLL restart on DVFS switch; enable auto EMI handshake */

arch/arm/mach-imx/clock-imx35.c

@@ -537,7 +537,8 @@ int __init mx35_clocks_init()
 	__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
 
 	clk_enable(&iim_clk);
-	mx35_read_cpu_rev();
+	imx_print_silicon_rev("i.MX35", mx35_revision());
+	clk_disable(&iim_clk);
 
 #ifdef CONFIG_MXC_USE_EPIT
 	epit_timer_init(&epit1_clk,

arch/arm/mach-imx/cpu-imx25.c

+/*
+ * MX25 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+static int mx25_cpu_rev = -1;
+
+static int mx25_read_cpu_rev(void)
+{
+	u32 rev;
+
+	rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV));
+	switch (rev) {
+	case 0x00:
+		return IMX_CHIP_REVISION_1_0;
+	case 0x01:
+		return IMX_CHIP_REVISION_1_1;
+	default:
+		return IMX_CHIP_REVISION_UNKNOWN;
+	}
+}
+
+int mx25_revision(void)
+{
+	if (mx25_cpu_rev == -1)
+		mx25_cpu_rev = mx25_read_cpu_rev();
+
+	return mx25_cpu_rev;
+}
+EXPORT_SYMBOL(mx25_revision);

arch/arm/mach-imx/cpu-imx27.c

@@ -26,12 +26,12 @@
 
 #include <mach/hardware.h>
 
-static int cpu_silicon_rev = -1;
-static int cpu_partnumber;
+static int mx27_cpu_rev = -1;
+static int mx27_cpu_partnumber;
 
 #define SYS_CHIP_ID             0x00    /* The offset of CHIP ID register */
 
-static void query_silicon_parameter(void)
+static int mx27_read_cpu_rev(void)
 {
 	u32 val;
 	/*
@@ -42,20 +42,18 @@ static void query_silicon_parameter(void)
 	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
 				+ SYS_CHIP_ID));
 
+	mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);
+
 	switch (val >> 28) {
 	case 0:
-		cpu_silicon_rev = IMX_CHIP_REVISION_1_0;
-		break;
+		return IMX_CHIP_REVISION_1_0;
 	case 1:
-		cpu_silicon_rev = IMX_CHIP_REVISION_2_0;
-		break;
+		return IMX_CHIP_REVISION_2_0;
 	case 2:
-		cpu_silicon_rev = IMX_CHIP_REVISION_2_1;
-		break;
+		return IMX_CHIP_REVISION_2_1;
 	default:
-		cpu_silicon_rev = IMX_CHIP_REVISION_UNKNOWN;
+		return IMX_CHIP_REVISION_UNKNOWN;
 	}
-	cpu_partnumber = (int)((val >> 12) & 0xFFFF);
 }
 
 /*
@@ -65,12 +63,12 @@ static void query_silicon_parameter(void)
  */
 int mx27_revision(void)
 {
-	if (cpu_silicon_rev == -1)
-		query_silicon_parameter();
+	if (mx27_cpu_rev == -1)
+		mx27_cpu_rev = mx27_read_cpu_rev();
 
-	if (cpu_partnumber != 0x8821)
+	if (mx27_cpu_partnumber != 0x8821)
 		return -EINVAL;
 
-	return cpu_silicon_rev;
+	return mx27_cpu_rev;
 }
 EXPORT_SYMBOL(mx27_revision);

arch/arm/mach-imx/cpu-imx31.c

@@ -13,45 +13,50 @@
 #include <linux/io.h>
 #include <mach/hardware.h>
 #include <mach/iim.h>
+#include <mach/common.h>
 
-unsigned int mx31_cpu_rev;
-EXPORT_SYMBOL(mx31_cpu_rev);
+static int mx31_cpu_rev = -1;
 
 static struct {
 	u8 srev;
 	const char *name;
-	const char *v;
 	unsigned int rev;
-} mx31_cpu_type[] __initdata = {
-	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = IMX_CHIP_REVISION_1_0	},
-	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
-	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
-	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = IMX_CHIP_REVISION_1_1	},
-	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = IMX_CHIP_REVISION_1_1	},
-	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = IMX_CHIP_REVISION_1_2	},
-	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = IMX_CHIP_REVISION_1_2	},
-	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = IMX_CHIP_REVISION_2_0	},
-	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = IMX_CHIP_REVISION_2_0	},
+} mx31_cpu_type[] = {
+	{ .srev = 0x00, .name = "i.MX31(L)", .rev = IMX_CHIP_REVISION_1_0 },
+	{ .srev = 0x10, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_1_1 },
+	{ .srev = 0x11, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_1_1 },
+	{ .srev = 0x12, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_1_1 },
+	{ .srev = 0x13, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_1_1 },
+	{ .srev = 0x14, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_1_2 },
+	{ .srev = 0x15, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_1_2 },
+	{ .srev = 0x28, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_2_0 },
+	{ .srev = 0x29, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_2_0 },
 };
 
-void __init mx31_read_cpu_rev(void)
+static int mx31_read_cpu_rev(void)
 {
 	u32 i, srev;
 
 	/* read SREV register from IIM module */
 	srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
+	srev &= 0xff;
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
 		if (srev == mx31_cpu_type[i].srev) {
-			printk(KERN_INFO
-				"CPU identified as %s, silicon rev %s\n",
-				mx31_cpu_type[i].name, mx31_cpu_type[i].v);
-
-			mx31_cpu_rev = mx31_cpu_type[i].rev;
-			return;
+			imx_print_silicon_rev(mx31_cpu_type[i].name,
+						mx31_cpu_type[i].rev);
+			return mx31_cpu_type[i].rev;
 		}
 
-	mx31_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+	imx_print_silicon_rev("i.MX31", IMX_CHIP_REVISION_UNKNOWN);
+	return IMX_CHIP_REVISION_UNKNOWN;
+}
+
+int mx31_revision(void)
+{
+	if (mx31_cpu_rev == -1)
+		mx31_cpu_rev = mx31_read_cpu_rev();
 
-	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
+	return mx31_cpu_rev;
 }
+EXPORT_SYMBOL(mx31_revision);

arch/arm/mach-imx/cpu-imx35.c

@@ -13,32 +13,30 @@
 #include <mach/hardware.h>
 #include <mach/iim.h>
 
-unsigned int mx35_cpu_rev;
-EXPORT_SYMBOL(mx35_cpu_rev);
+static int mx35_cpu_rev = -1;
 
-void __init mx35_read_cpu_rev(void)
+static int mx35_read_cpu_rev(void)
 {
 	u32 rev;
-	char *srev;
 
 	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
 	switch (rev) {
 	case 0x00:
-		mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
-		srev = "1.0";
-		break;
+		return IMX_CHIP_REVISION_1_0;
 	case 0x10:
-		mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
-		srev = "2.0";
-		break;
+		return IMX_CHIP_REVISION_2_0;
 	case 0x11:
-		mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
-		srev = "2.1";
-		break;
+		return IMX_CHIP_REVISION_2_1;
 	default:
-		mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
-		srev = "unknown";
+		return IMX_CHIP_REVISION_UNKNOWN;
 	}
+}
+
+int mx35_revision(void)
+{
+	if (mx35_cpu_rev == -1)
+		mx35_cpu_rev = mx35_read_cpu_rev();
 
-	printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
+	return mx35_cpu_rev;
 }
+EXPORT_SYMBOL(mx35_revision);

arch/arm/mach-imx/mach-apf9328.c

@@ -136,6 +136,7 @@ MACHINE_START(APF9328, "Armadeus APF9328")
 	.map_io       = mx1_map_io,
 	.init_early   = imx1_init_early,
 	.init_irq     = mx1_init_irq,
+	.handle_irq   = imx1_handle_irq,
 	.timer        = &apf9328_timer,
 	.init_machine = apf9328_init,
 MACHINE_END

arch/arm/mach-imx/mach-armadillo5x0.c

@@ -558,6 +558,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &armadillo5x0_timer,
 	.init_machine = armadillo5x0_init,
 MACHINE_END

arch/arm/mach-imx/mach-bug.c

@@ -62,6 +62,7 @@ MACHINE_START(BUG, "BugLabs BUGBase")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &bug_timer,
 	.init_machine = bug_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-cpuimx27.c

@@ -315,6 +315,7 @@ MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &eukrea_cpuimx27_timer,
 	.init_machine = eukrea_cpuimx27_init,
 MACHINE_END

arch/arm/mach-imx/mach-cpuimx35.c

@@ -198,6 +198,7 @@ MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
+	.handle_irq = imx35_handle_irq,
 	.timer = &eukrea_cpuimx35_timer,
 	.init_machine = eukrea_cpuimx35_init,
 MACHINE_END

arch/arm/mach-imx/mach-eukrea_cpuimx25.c

@@ -167,6 +167,7 @@ MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
 	.map_io = mx25_map_io,
 	.init_early = imx25_init_early,
 	.init_irq = mx25_init_irq,
+	.handle_irq = imx25_handle_irq,
 	.timer = &eukrea_cpuimx25_timer,
 	.init_machine = eukrea_cpuimx25_init,
 MACHINE_END

arch/arm/mach-imx/mach-imx27_visstrim_m10.c

@@ -279,6 +279,7 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &visstrim_m10_timer,
 	.init_machine = visstrim_m10_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-imx27ipcam.c

@@ -75,6 +75,7 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &mx27ipcam_timer,
 	.init_machine = mx27ipcam_init,
 MACHINE_END

arch/arm/mach-imx/mach-imx27lite.c

@@ -81,6 +81,7 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &mx27lite_timer,
 	.init_machine = mx27lite_init,
 MACHINE_END

arch/arm/mach-imx/mach-kzm_arm11_01.c

@@ -276,6 +276,7 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
 	.map_io = kzm_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &kzm_timer,
 	.init_machine = kzm_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx1ads.c

@@ -144,6 +144,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
+	.handle_irq = imx1_handle_irq,
 	.timer = &mx1ads_timer,
 	.init_machine = mx1ads_init,
 MACHINE_END
@@ -153,6 +154,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
+	.handle_irq = imx1_handle_irq,
 	.timer = &mx1ads_timer,
 	.init_machine = mx1ads_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx21ads.c

@@ -309,6 +309,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	.map_io = mx21ads_map_io,
 	.init_early = imx21_init_early,
 	.init_irq = mx21_init_irq,
+	.handle_irq = imx21_handle_irq,
 	.timer = &mx21ads_timer,
 	.init_machine = mx21ads_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx25_3ds.c

@@ -43,6 +43,8 @@
 
 #include "devices-imx25.h"
 
+#define MX25PDK_CAN_PWDN	IMX_GPIO_NR(4, 6)
+
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -108,6 +110,11 @@ static iomux_v3_cfg_t mx25pdk_pads[] = {
 	/* I2C1 */
 	MX25_PAD_I2C1_CLK__I2C1_CLK,
 	MX25_PAD_I2C1_DAT__I2C1_DAT,
+
+	/* CAN1 */
+	MX25_PAD_GPIO_A__CAN1_TX,
+	MX25_PAD_GPIO_B__CAN1_RX,
+	MX25_PAD_D14__GPIO_4_6,	/* CAN_PWDN */
 };
 
 static const struct fec_platform_data mx25_fec_pdata __initconst = {
@@ -240,6 +247,9 @@ static void __init mx25pdk_init(void)
 
 	imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
 	imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
+
+	gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn");
+	imx25_add_flexcan0(NULL);
 }
 
 static void __init mx25pdk_timer_init(void)
@@ -257,6 +267,7 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
 	.map_io = mx25_map_io,
 	.init_early = imx25_init_early,
 	.init_irq = mx25_init_irq,
+	.handle_irq = imx25_handle_irq,
 	.timer = &mx25pdk_timer,
 	.init_machine = mx25pdk_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -423,6 +423,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &mx27pdk_timer,
 	.init_machine = mx27pdk_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx27ads.c

@@ -348,6 +348,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.map_io = mx27ads_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &mx27ads_timer,
 	.init_machine = mx27ads_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx31_3ds.c

@@ -766,6 +766,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &mx31_3ds_timer,
 	.init_machine = mx31_3ds_init,
 	.reserve = mx31_3ds_reserve,

arch/arm/mach-imx/mach-mx31ads.c

@@ -539,6 +539,7 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	.map_io = mx31ads_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31ads_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &mx31ads_timer,
 	.init_machine = mx31ads_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx31lilly.c

@@ -299,6 +299,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &mx31lilly_timer,
 	.init_machine = mx31lilly_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx31lite.c

@@ -284,6 +284,7 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	.map_io = mx31lite_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &mx31lite_timer,
 	.init_machine = mx31lite_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx31moboard.c

@@ -28,6 +28,9 @@
 #include <linux/spi/spi.h>
 #include <linux/types.h>
 #include <linux/memblock.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
 
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -490,6 +493,18 @@ static int __init mx31moboard_init_cam(void)
 
 }
 
+static void mx31moboard_poweroff(void)
+{
+	struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
+
+	if (!IS_ERR(clk))
+		clk_enable(clk);
+
+	mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
+
+	__raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+}
+
 static int mx31moboard_baseboard;
 core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
 
@@ -528,6 +543,8 @@ static void __init mx31moboard_init(void)
 
 	moboard_usbh2_init();
 
+	pm_power_off = mx31moboard_poweroff;
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
@@ -572,6 +589,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &mx31moboard_timer,
 	.init_machine = mx31moboard_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx35_3ds.c

@@ -221,6 +221,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
+	.handle_irq = imx35_handle_irq,
 	.timer = &mx35pdk_timer,
 	.init_machine = mx35_3ds_init,
 MACHINE_END

arch/arm/mach-imx/mach-mxt_td60.c

@@ -271,6 +271,7 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &mxt_td60_timer,
 	.init_machine = mxt_td60_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-pca100.c

@@ -439,6 +439,7 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.init_machine = pca100_init,
 	.timer = &pca100_timer,
 MACHINE_END

arch/arm/mach-imx/mach-pcm037.c

@@ -693,6 +693,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &pcm037_timer,
 	.init_machine = pcm037_init,
 MACHINE_END

arch/arm/mach-imx/mach-pcm038.c

@@ -355,6 +355,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &pcm038_timer,
 	.init_machine = pcm038_init,
 MACHINE_END

arch/arm/mach-imx/mach-pcm043.c

@@ -422,6 +422,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
+	.handle_irq = imx35_handle_irq,
 	.timer = &pcm043_timer,
 	.init_machine = pcm043_init,
 MACHINE_END

arch/arm/mach-imx/mach-qong.c

@@ -252,6 +252,7 @@ static void __init qong_init(void)
 	mxc_init_imx_uart();
 	qong_init_nor_mtd();
 	qong_init_fpga();
+	imx31_add_imx2_wdt(NULL);
 }
 
 static void __init qong_timer_init(void)
@@ -269,6 +270,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &qong_timer,
 	.init_machine = qong_init,
 MACHINE_END

arch/arm/mach-imx/mach-scb9328.c

@@ -141,6 +141,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
+	.handle_irq = imx1_handle_irq,
 	.timer = &scb9328_timer,
 	.init_machine = scb9328_init,
 MACHINE_END

arch/arm/mach-imx/mach-vpr200.c

@@ -319,6 +319,7 @@ MACHINE_START(VPR200, "VPR200")
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
+	.handle_irq = imx35_handle_irq,
 	.timer = &vpr200_timer,
 	.init_machine = vpr200_board_init,
 MACHINE_END

arch/arm/mach-mx5/Kconfig

-if ARCH_MX503 || ARCH_MX51
+if ARCH_MX5
+
 # ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
 # image. So for most time, SOC_IMX50/51/53 should be used.
 
-config ARCH_MX5
+config ARCH_MX51
 	bool
 
 config ARCH_MX50
@@ -19,7 +20,6 @@ config SOC_IMX50
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_HAS_CPUFREQ
-	select ARCH_MX5
 	select ARCH_MX50
 
 config	SOC_IMX51
@@ -30,7 +30,7 @@ config	SOC_IMX51
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_HAS_CPUFREQ
-	select ARCH_MX5
+	select ARCH_MX51
 
 config	SOC_IMX53
 	bool
@@ -38,10 +38,8 @@ config	SOC_IMX53
 	select ARM_L1_CACHE_SHIFT_6
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
-	select ARCH_MX5
 	select ARCH_MX53
 
-if ARCH_MX50_SUPPORTED
 #comment "i.MX50 machines:"
 
 config MACH_MX50_RDP
@@ -56,9 +54,6 @@ config MACH_MX50_RDP
 	  Include support for MX50 reference design platform (RDP) board. This
 	  includes specific configurations for the board and its peripherals.
 
-endif # ARCH_MX50_SUPPORTED
-
-if ARCH_MX51
 comment "i.MX51 machines:"
 
 config MACH_MX51_BABBAGE
@@ -174,9 +169,6 @@ config MACH_MX51_EFIKASB
 	  Include support for Genesi Efika Smartbook. This includes specific
 	  configurations for the board and its peripherals.
 
-endif # ARCH_MX51
-
-if ARCH_MX53_SUPPORTED
 comment "i.MX53 machines:"
 
 config MACH_MX53_EVK
@@ -228,6 +220,4 @@ config MACH_MX53_ARD
 	  Include support for MX53 ARD platform. This includes specific
 	  configurations for the board and its peripherals.
 
-endif # ARCH_MX53_SUPPORTED
-
 endif

arch/arm/mach-mx5/board-cpuimx51.c

@@ -294,6 +294,7 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mxc_timer,
 	.init_machine = eukrea_cpuimx51_init,
 MACHINE_END

arch/arm/mach-mx5/board-cpuimx51sd.c

@@ -332,6 +332,7 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mxc_timer,
 	.init_machine = eukrea_cpuimx51sd_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx50_rdp.c

@@ -219,6 +219,7 @@ MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
 	.map_io = mx50_map_io,
 	.init_early = imx50_init_early,
 	.init_irq = mx50_init_irq,
+	.handle_irq = imx50_handle_irq,
 	.timer = &mx50_rdp_timer,
 	.init_machine = mx50_rdp_board_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx51_3ds.c

@@ -172,6 +172,7 @@ MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_3ds_timer,
 	.init_machine = mx51_3ds_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -418,6 +418,7 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_babbage_timer,
 	.init_machine = mx51_babbage_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx51_efikamx.c

@@ -161,6 +161,11 @@ static const struct gpio_led_platform_data
 	.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
 };
 
+static struct esdhc_platform_data sd_pdata = {
+	.cd_type = ESDHC_CD_CONTROLLER,
+	.wp_type = ESDHC_WP_CONTROLLER,
+};
+
 static struct gpio_keys_button mx51_efikamx_powerkey[] = {
 	{
 		.code = KEY_POWER,
@@ -237,9 +242,11 @@ static void __init mx51_efikamx_init(void)
 
 	/* on < 1.2 boards both SD controllers are used */
 	if (system_rev < 0x12) {
-		imx51_add_sdhci_esdhc_imx(1, NULL);
+		imx51_add_sdhci_esdhc_imx(0, NULL);
+		imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
 		mx51_efikamx_leds[2].default_trigger = "mmc1";
-	}
+	} else
+		imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
 
 	gpio_led_register_device(-1, &mx51_efikamx_leds_data);
 	imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
@@ -282,6 +289,7 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_efikamx_timer,
 	.init_machine = mx51_efikamx_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx51_efikasb.c

@@ -54,6 +54,7 @@
 #define EFIKASB_RFKILL		IMX_GPIO_NR(3, 1)
 
 #define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
+#define MX51_PAD_SD1_CD	IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
 
 static iomux_v3_cfg_t mx51efikasb_pads[] = {
 	/* USB HOST2 */
@@ -95,6 +96,8 @@ static iomux_v3_cfg_t mx51efikasb_pads[] = {
 
 	/* BT */
 	MX51_PAD_EIM_A17__GPIO2_11,
+
+	MX51_PAD_SD1_CD,
 };
 
 static int initialize_usbh2_port(struct platform_device *pdev)
@@ -180,6 +183,18 @@ static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst =
 	.nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
 };
 
+static struct esdhc_platform_data sd0_pdata = {
+#define EFIKASB_SD1_CD	IMX_GPIO_NR(2, 27)
+	.cd_gpio = EFIKASB_SD1_CD,
+	.cd_type = ESDHC_CD_GPIO,
+	.wp_type = ESDHC_WP_CONTROLLER,
+};
+
+static struct esdhc_platform_data sd1_pdata = {
+	.cd_type = ESDHC_CD_CONTROLLER,
+	.wp_type = ESDHC_WP_CONTROLLER,
+};
+
 static struct regulator *pwgt1, *pwgt2;
 
 static void mx51_efikasb_power_off(void)
@@ -248,7 +263,8 @@ static void __init efikasb_board_init(void)
 
 	mx51_efikasb_board_id();
 	mx51_efikasb_usb();
-	imx51_add_sdhci_esdhc_imx(1, NULL);
+	imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
+	imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
 
 	gpio_led_register_device(-1, &mx51_efikasb_leds_data);
 	imx_add_gpio_keys(&mx51_efikasb_keys_data);
@@ -268,6 +284,7 @@ MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.init_machine =  efikasb_board_init,
 	.timer = &mx51_efikasb_timer,
 MACHINE_END

arch/arm/mach-mx5/board-mx53_ard.c

@@ -250,6 +250,7 @@ MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
 	.map_io = mx53_map_io,
 	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
+	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_ard_timer,
 	.init_machine = mx53_ard_board_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx53_evk.c

@@ -167,6 +167,7 @@ MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
 	.map_io = mx53_map_io,
 	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
+	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_evk_timer,
 	.init_machine = mx53_evk_board_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx53_loco.c

@@ -22,6 +22,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/i2c.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
@@ -42,6 +43,7 @@
 #define LOCO_SD3_CD			IMX_GPIO_NR(3, 11)
 #define LOCO_SD3_WP			IMX_GPIO_NR(3, 12)
 #define LOCO_SD1_CD			IMX_GPIO_NR(3, 13)
+#define LOCO_ACCEL_EN			IMX_GPIO_NR(6, 14)
 
 static iomux_v3_cfg_t mx53_loco_pads[] = {
 	/* FEC */
@@ -64,6 +66,10 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
 	MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
 	MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
 	MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
+	/* I2C1 */
+	MX53_PAD_CSI0_DAT8__I2C1_SDA,
+	MX53_PAD_CSI0_DAT9__I2C1_SCL,
+	MX53_PAD_NANDF_CS1__GPIO6_14,	/* Accelerometer Enable */
 	/* I2C2 */
 	MX53_PAD_KEY_COL3__I2C2_SCL,
 	MX53_PAD_KEY_ROW3__I2C2_SDA,
@@ -257,8 +263,15 @@ static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
 	.num_leds	= ARRAY_SIZE(mx53loco_leds),
 };
 
+static struct i2c_board_info mx53loco_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("mma8450", 0x1C),
+	},
+};
+
 static void __init mx53_loco_board_init(void)
 {
+	int ret;
 	imx53_soc_init();
 
 	mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
@@ -267,6 +280,13 @@ static void __init mx53_loco_board_init(void)
 	mx53_loco_fec_reset();
 	imx53_add_fec(&mx53_loco_fec_data);
 	imx53_add_imx2_wdt(0, NULL);
+
+	ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
+	if (ret)
+		pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
+
+	i2c_register_board_info(0, mx53loco_i2c_devices,
+				ARRAY_SIZE(mx53loco_i2c_devices));
 	imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
 	imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
 	imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
@@ -289,6 +309,7 @@ MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
 	.map_io = mx53_map_io,
 	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
+	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_loco_timer,
 	.init_machine = mx53_loco_board_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx53_smd.c

@@ -156,6 +156,7 @@ MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
 	.map_io = mx53_map_io,
 	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
+	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_smd_timer,
 	.init_machine = mx53_smd_board_init,
 MACHINE_END

arch/arm/mach-mx5/clock-mx51-mx53.c

@@ -1573,9 +1573,8 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 	clk_enable(&main_bus_clk);
 
 	clk_enable(&iim_clk);
-	mx51_revision();
+	imx_print_silicon_rev("i.MX51", mx51_revision());
 	clk_disable(&iim_clk);
-	mx51_display_revision();
 
 	/* move usb_phy_clk to 24MHz */
 	clk_set_parent(&usb_phy1_clk, &osc_clk);
@@ -1617,9 +1616,8 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
 	clk_enable(&main_bus_clk);
 
 	clk_enable(&iim_clk);
-	mx53_revision();
+	imx_print_silicon_rev("i.MX53", mx53_revision());
 	clk_disable(&iim_clk);
-	mx53_display_revision();
 
 	/* Set SDHC parents to be PLL2 */
 	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);

arch/arm/mach-mx5/cpu.c

@@ -18,7 +18,7 @@
 #include <mach/hardware.h>
 #include <asm/io.h>
 
-static int cpu_silicon_rev = -1;
+static int mx5_cpu_rev = -1;
 
 #define IIM_SREV 0x24
 #define MX50_HW_ADADIG_DIGPROG	0xB0
@@ -28,11 +28,14 @@ static int get_mx51_srev(void)
 	void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
 	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
 
-	if (rev == 0x0)
+	switch (rev) {
+	case 0x0:
 		return IMX_CHIP_REVISION_2_0;
-	else if (rev == 0x10)
+	case 0x10:
 		return IMX_CHIP_REVISION_3_0;
-	return 0;
+	default:
+		return IMX_CHIP_REVISION_UNKNOWN;
+	}
 }
 
 /*
@@ -45,33 +48,13 @@ int mx51_revision(void)
 	if (!cpu_is_mx51())
 		return -EINVAL;
 
-	if (cpu_silicon_rev == -1)
-		cpu_silicon_rev = get_mx51_srev();
+	if (mx5_cpu_rev == -1)
+		mx5_cpu_rev = get_mx51_srev();
 
-	return cpu_silicon_rev;
+	return mx5_cpu_rev;
 }
 EXPORT_SYMBOL(mx51_revision);
 
-void mx51_display_revision(void)
-{
-	int rev;
-	char *srev;
-	rev = mx51_revision();
-
-	switch (rev) {
-	case IMX_CHIP_REVISION_2_0:
-		srev = IMX_CHIP_REVISION_2_0_STRING;
-		break;
-	case IMX_CHIP_REVISION_3_0:
-		srev = IMX_CHIP_REVISION_3_0_STRING;
-		break;
-	default:
-		srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
-	}
-	printk(KERN_INFO "CPU identified as i.MX51, silicon rev %s\n", srev);
-}
-EXPORT_SYMBOL(mx51_display_revision);
-
 #ifdef CONFIG_NEON
 
 /*
@@ -121,10 +104,10 @@ int mx53_revision(void)
 	if (!cpu_is_mx53())
 		return -EINVAL;
 
-	if (cpu_silicon_rev == -1)
-		cpu_silicon_rev = get_mx53_srev();
+	if (mx5_cpu_rev == -1)
+		mx5_cpu_rev = get_mx53_srev();
 
-	return cpu_silicon_rev;
+	return mx5_cpu_rev;
 }
 EXPORT_SYMBOL(mx53_revision);
 
@@ -134,7 +117,7 @@ static int get_mx50_srev(void)
 	u32 rev;
 
 	if (!anatop) {
-		cpu_silicon_rev = -EINVAL;
+		mx5_cpu_rev = -EINVAL;
 		return 0;
 	}
 
@@ -159,36 +142,13 @@ int mx50_revision(void)
 	if (!cpu_is_mx50())
 		return -EINVAL;
 
-	if (cpu_silicon_rev == -1)
-		cpu_silicon_rev = get_mx50_srev();
+	if (mx5_cpu_rev == -1)
+		mx5_cpu_rev = get_mx50_srev();
 
-	return cpu_silicon_rev;
+	return mx5_cpu_rev;
 }
 EXPORT_SYMBOL(mx50_revision);
 
-void mx53_display_revision(void)
-{
-	int rev;
-	char *srev;
-	rev = mx53_revision();
-
-	switch (rev) {
-	case IMX_CHIP_REVISION_1_0:
-		srev = IMX_CHIP_REVISION_1_0_STRING;
-		break;
-	case IMX_CHIP_REVISION_2_0:
-		srev = IMX_CHIP_REVISION_2_0_STRING;
-		break;
-	case IMX_CHIP_REVISION_2_1:
-		srev = IMX_CHIP_REVISION_2_1_STRING;
-		break;
-	default:
-		srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
-	}
-	printk(KERN_INFO "CPU identified as i.MX53, silicon rev %s\n", srev);
-}
-EXPORT_SYMBOL(mx53_display_revision);
-
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;

arch/arm/mach-mx5/devices-imx53.h

@@ -44,4 +44,5 @@ extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
 extern const struct imx_pata_imx_data imx53_pata_imx_data;
 #define imx53_add_pata_imx() \
 	imx_add_pata_imx(&imx53_pata_imx_data)
+
 extern struct platform_device *__init imx53_add_ahci_imx(void);

arch/arm/mach-mx5/mx51_efika.c

@@ -607,7 +607,6 @@ void __init efika_board_common_init(void)
 					ARRAY_SIZE(mx51efika_pads));
 	imx51_add_imx_uart(0, &uart_pdata);
 	mx51_efika_usb();
-	imx51_add_sdhci_esdhc_imx(0, NULL);
 
 	/* FIXME: comes from original code. check this. */
 	if (mx51_revision() < IMX_CHIP_REVISION_2_0)

arch/arm/mach-mxs/Kconfig

@@ -23,6 +23,7 @@ config MACH_STMP378X_DEVB
 	select MXS_HAVE_AMBA_DUART
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_MXS_MMC
+	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
 	help
 	  Include support for STMP378x-devb platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -34,6 +35,7 @@ config MACH_MX23EVK
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
+	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
 	help
 	  Include support for MX23EVK platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -48,6 +50,9 @@ config MACH_MX28EVK
 	select MXS_HAVE_PLATFORM_FLEXCAN
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
+	select MXS_HAVE_PLATFORM_MXS_SAIF
+	select MXS_HAVE_PLATFORM_MXS_I2C
+	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
 	select MXS_OCOTP
 	help
 	  Include support for MX28EVK platform. This includes specific
@@ -63,6 +68,7 @@ config MODULE_TX28
 	select MXS_HAVE_PLATFORM_MXS_I2C
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXS_PWM
+	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
 
 config MODULE_M28
 	bool

arch/arm/mach-mxs/clock-mx28.c

@@ -640,6 +640,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "lradc", lradc_clk)
 	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
 	_REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk)
+	_REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk)
+	_REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk)
 };
 
 static int clk_misc_init(void)
@@ -708,11 +710,11 @@ static int clk_misc_init(void)
 
 	/* SAIF has to use frac div for functional operation */
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
-	reg &= ~BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
+	reg |= BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
 
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
-	reg &= ~BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
+	reg |= BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
 
 	/*
@@ -780,6 +782,8 @@ int __init mx28_clocks_init(void)
 	clk_enable(&uart_clk);
 
 	clk_set_parent(&lcdif_clk, &ref_pix_clk);
+	clk_set_parent(&saif0_clk, &pll0_clk);
+	clk_set_parent(&saif1_clk, &pll0_clk);
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 

arch/arm/mach-mxs/devices-mx23.h

@@ -29,3 +29,5 @@ extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
 
 struct platform_device *__init mx23_add_mxsfb(
 		const struct mxsfb_platform_data *pdata);
+
+struct platform_device *__init mx23_add_rtc_stmp3xxx(void);

arch/arm/mach-mxs/devices-mx28.h

@@ -45,3 +45,8 @@ extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
 
 struct platform_device *__init mx28_add_mxsfb(
 		const struct mxsfb_platform_data *pdata);
+
+extern const struct mxs_saif_data mx28_saif_data[] __initconst;
+#define mx28_add_saif(id)              mxs_add_saif(&mx28_saif_data[id])
+
+struct platform_device *__init mx28_add_rtc_stmp3xxx(void);

arch/arm/mach-mxs/devices/Kconfig

@@ -23,3 +23,9 @@ config MXS_HAVE_PLATFORM_MXS_PWM
 
 config MXS_HAVE_PLATFORM_MXSFB
 	bool
+
+config MXS_HAVE_PLATFORM_MXS_SAIF
+	bool
+
+config MXS_HAVE_PLATFORM_RTC_STMP3XXX
+	bool

arch/arm/mach-mxs/devices/Makefile

@@ -8,3 +8,5 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
 obj-y += platform-gpio-mxs.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o

arch/arm/mach-mxs/devices/platform-mxs-saif.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_saif_data_entry_single(soc, _id)				\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _SAIF ## _id ## _BASE_ADDR,		\
+		.irq = soc ## _INT_SAIF ## _id,				\
+		.dma = soc ## _DMA_SAIF ## _id,				\
+		.dmairq = soc ## _INT_SAIF ## _id ##_DMA,		\
+	}
+
+#define mxs_saif_data_entry(soc, _id)					\
+	[_id] = mxs_saif_data_entry_single(soc, _id)
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_saif_data mx28_saif_data[] __initconst = {
+	mxs_saif_data_entry(MX28, 0),
+	mxs_saif_data_entry(MX28, 1),
+};
+#endif
+
+struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->dma,
+			.end = data->dma,
+			.flags = IORESOURCE_DMA,
+		}, {
+			.start = data->dmairq,
+			.end = data->dmairq,
+			.flags = IORESOURCE_IRQ,
+		},
+
+	};
+
+	return mxs_add_platform_device("mxs-saif", data->id, res,
+					ARRAY_SIZE(res), NULL, 0);
+}

arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c

+/*
+ * Copyright (C) 2011 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#ifdef CONFIG_SOC_IMX23
+struct platform_device *__init mx23_add_rtc_stmp3xxx(void)
+{
+	struct resource res[] = {
+		{
+			.start = MX23_RTC_BASE_ADDR,
+			.end = MX23_RTC_BASE_ADDR + SZ_8K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = MX23_INT_RTC_ALARM,
+			.end = MX23_INT_RTC_ALARM,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
+					NULL, 0);
+}
+#endif /* CONFIG_SOC_IMX23 */
+
+#ifdef CONFIG_SOC_IMX28
+struct platform_device *__init mx28_add_rtc_stmp3xxx(void)
+{
+	struct resource res[] = {
+		{
+			.start = MX28_RTC_BASE_ADDR,
+			.end = MX28_RTC_BASE_ADDR + SZ_8K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = MX28_INT_RTC_ALARM,
+			.end = MX28_INT_RTC_ALARM,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
+					NULL, 0);
+}
+#endif /* CONFIG_SOC_IMX28 */

arch/arm/mach-mxs/include/mach/devices-common.h

@@ -92,3 +92,15 @@ struct platform_device *__init mxs_add_mxs_mmc(
 /* pwm */
 struct platform_device *__init mxs_add_mxs_pwm(
 		resource_size_t iobase, int id);
+
+/* saif */
+struct mxs_saif_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t irq;
+	resource_size_t dma;
+	resource_size_t dmairq;
+};
+
+struct platform_device *__init mxs_add_saif(
+		const struct mxs_saif_data *data);

arch/arm/mach-mxs/mach-mx23evk.c

@@ -166,6 +166,7 @@ static void __init mx23evk_init(void)
 		gpio_set_value(MX23EVK_BL_ENABLE, 1);
 
 	mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
+	mx23_add_rtc_stmp3xxx();
 }
 
 static void __init mx23evk_timer_init(void)

arch/arm/mach-mxs/mach-mx28evk.c

@@ -17,6 +17,9 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -182,6 +185,24 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = {
 
 	/* led */
 	MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
+
+	/* I2C */
+	MX28_PAD_I2C0_SCL__I2C0_SCL |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_I2C0_SDA__I2C0_SDA |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+
+	/* saif0 & saif1 */
+	MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
 };
 
 /* led */
@@ -351,6 +372,50 @@ static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
 	},
 };
 
+static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("sgtl5000", 0x0a),
+	},
+};
+
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("VDDA", "0-000a"),
+	REGULATOR_SUPPLY("VDDIO", "0-000a"),
+};
+
+static struct regulator_init_data mx28evk_vdd_reg_init_data = {
+	.constraints	= {
+		.name	= "3V3",
+		.always_on = 1,
+	},
+	.consumer_supplies = mx28evk_audio_consumer_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config mx28evk_vdd_pdata = {
+	.supply_name	= "board-3V3",
+	.microvolts	= 3300000,
+	.gpio		= -EINVAL,
+	.enabled_at_boot = 1,
+	.init_data	= &mx28evk_vdd_reg_init_data,
+};
+static struct platform_device mx28evk_voltage_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &mx28evk_vdd_pdata,
+	},
+};
+static void __init mx28evk_add_regulators(void)
+{
+	platform_device_register(&mx28evk_voltage_regulator);
+}
+#else
+static void __init mx28evk_add_regulators(void) {}
+#endif
+
 static struct gpio mx28evk_lcd_gpios[] = {
 	{ MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
 	{ MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
@@ -389,6 +454,18 @@ static void __init mx28evk_init(void)
 	else
 		mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
 
+	mx28_add_saif(0);
+	mx28_add_saif(1);
+
+	mx28_add_mxs_i2c(0);
+	i2c_register_board_info(0, mxs_i2c0_board_info,
+				ARRAY_SIZE(mxs_i2c0_board_info));
+
+	mx28evk_add_regulators();
+
+	mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
+			NULL, 0);
+
 	/* power on mmc slot by writing 0 to the gpio */
 	ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
 			       "mmc0-slot-power");
@@ -403,6 +480,9 @@ static void __init mx28evk_init(void)
 	else
 		mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 
+	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+	mx28_add_rtc_stmp3xxx();
+
 	gpio_led_register_device(0, &mx28evk_led_data);
 }
 

arch/arm/mach-mxs/mach-stmp378x_devb.c

@@ -90,6 +90,7 @@ static void __init stmp378x_dvb_init(void)
 
 	mx23_add_duart();
 	mx23_add_auart0();
+	mx23_add_rtc_stmp3xxx();
 
 	/* power on mmc slot */
 	ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,

arch/arm/mach-mxs/mach-tx28.c

@@ -161,6 +161,7 @@ static void __init tx28_stk5v3_init(void)
 	i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
 			ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
 	mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
+	mx28_add_rtc_stmp3xxx();
 }
 
 static void __init tx28_timer_init(void)

arch/arm/mach-tegra/Kconfig

@@ -69,6 +69,12 @@ config MACH_WARIO
        help
          Support for the Wario version of Seaboard
 
+config MACH_VENTANA
+       bool "Ventana board"
+       select MACH_TEGRA_DT
+       help
+         Support for the nVidia Ventana development platform
+
 choice
         prompt "Low-level debug console UART"
         default TEGRA_DEBUG_UART_NONE

arch/arm/mach-tegra/Makefile

@@ -31,6 +31,7 @@ obj-${CONFIG_MACH_SEABOARD}             += board-seaboard-pinmux.o
 
 obj-${CONFIG_MACH_TEGRA_DT}             += board-dt.o
 obj-${CONFIG_MACH_TEGRA_DT}             += board-harmony-pinmux.o
+obj-${CONFIG_MACH_TEGRA_DT}             += board-seaboard-pinmux.o
 
 obj-${CONFIG_MACH_TRIMSLICE}            += board-trimslice.o
 obj-${CONFIG_MACH_TRIMSLICE}            += board-trimslice-pinmux.o

arch/arm/mach-tegra/Makefile.boot

@@ -4,3 +4,4 @@ initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00800000
 
 dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb
 dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
+dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb

arch/arm/mach-tegra/board-dt.c

@@ -47,7 +47,7 @@
 
 void harmony_pinmux_init(void);
 void seaboard_pinmux_init(void);
-
+void ventana_pinmux_init(void);
 
 struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
@@ -80,9 +80,19 @@ static struct of_device_id tegra_dt_gic_match[] __initdata = {
 	{}
 };
 
+static struct {
+	char *machine;
+	void (*init)(void);
+} pinmux_configs[] = {
+	{ "nvidia,harmony", harmony_pinmux_init },
+	{ "nvidia,seaboard", seaboard_pinmux_init },
+	{ "nvidia,ventana", ventana_pinmux_init },
+};
+
 static void __init tegra_dt_init(void)
 {
 	struct device_node *node;
+	int i;
 
 	node = of_find_matching_node_by_address(NULL, tegra_dt_gic_match,
 						TEGRA_ARM_INT_DIST_BASE);
@@ -91,10 +101,15 @@ static void __init tegra_dt_init(void)
 
 	tegra_clk_init_from_table(tegra_dt_clk_init_table);
 
-	if (of_machine_is_compatible("nvidia,harmony"))
-		harmony_pinmux_init();
-	else if (of_machine_is_compatible("nvidia,seaboard"))
-		seaboard_pinmux_init();
+	for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
+		if (of_machine_is_compatible(pinmux_configs[i].machine)) {
+			pinmux_configs[i].init();
+			break;
+		}
+	}
+
+	WARN(i == ARRAY_SIZE(pinmux_configs),
+		"Unknown platform! Pinmuxing not initialized\n");
 
 	/*
 	 * Finished with the static registrations now; fill in the missing
@@ -106,6 +121,7 @@ static void __init tegra_dt_init(void)
 static const char * tegra_dt_board_compat[] = {
 	"nvidia,harmony",
 	"nvidia,seaboard",
+	"nvidia,ventana",
 	NULL
 };
 

arch/arm/mach-tegra/board-harmony-pinmux.c

@@ -20,6 +20,7 @@
 
 #include "gpio-names.h"
 #include "board-harmony.h"
+#include "devices.h"
 
 static struct tegra_pingroup_config harmony_pinmux[] = {
 	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_IDE,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config harmony_pinmux[] = {
 	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 };
 
+static struct platform_device *pinmux_devices[] = {
+	&tegra_gpio_device,
+	&tegra_pinmux_device,
+};
+
 static struct tegra_gpio_table gpio_table[] = {
 	{ .gpio = TEGRA_GPIO_SD2_CD,		.enable = true	},
 	{ .gpio = TEGRA_GPIO_SD2_WP,		.enable = true	},
@@ -155,6 +161,8 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void harmony_pinmux_init(void)
 {
+	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
 	tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
 
 	tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));

arch/arm/mach-tegra/board-harmony-power.c

@@ -18,10 +18,11 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-
+#include <linux/io.h>
 #include <linux/regulator/machine.h>
 #include <linux/mfd/tps6586x.h>
 
+#include <mach/iomap.h>
 #include <mach/irqs.h>
 
 #include "board-harmony.h"
@@ -113,6 +114,16 @@ static struct i2c_board_info __initdata harmony_regulators[] = {
 
 int __init harmony_regulator_init(void)
 {
+	void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
+	u32 pmc_ctrl;
+
+	/*
+	 * Configure the power management controller to trigger PMU
+	 * interrupts when low
+	 */
+	pmc_ctrl = readl(pmc + PMC_CTRL);
+	writel(pmc_ctrl | PMC_CTRL_INTR_LOW, pmc + PMC_CTRL);
+
 	i2c_register_board_info(3, harmony_regulators, 1);
 
 	return 0;

arch/arm/mach-tegra/board-paz00-pinmux.c

@@ -20,6 +20,7 @@
 
 #include "gpio-names.h"
 #include "board-paz00.h"
+#include "devices.h"
 
 static struct tegra_pingroup_config paz00_pinmux[] = {
 	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config paz00_pinmux[] = {
 	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 };
 
+static struct platform_device *pinmux_devices[] = {
+	&tegra_gpio_device,
+	&tegra_pinmux_device,
+};
+
 static struct tegra_gpio_table gpio_table[] = {
 	{ .gpio = TEGRA_GPIO_SD1_CD,	.enable = true },
 	{ .gpio = TEGRA_GPIO_SD1_WP,	.enable = true },
@@ -152,6 +158,8 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void paz00_pinmux_init(void)
 {
+	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
 	tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
 
 	tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));

arch/arm/mach-tegra/board-seaboard-pinmux.c

 /*
- * Copyright (C) 2010 NVIDIA Corporation
+ * Copyright (C) 2010,2011 NVIDIA Corporation
+ * Copyright (C) 2011 Google, Inc.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -21,6 +22,7 @@
 
 #include "gpio-names.h"
 #include "board-seaboard.h"
+#include "devices.h"
 
 #define DEFAULT_DRIVE(_name)					\
 	{							\
@@ -157,10 +159,33 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {
 	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 };
 
+static __initdata struct tegra_pingroup_config ventana_pinmux[] = {
+	{TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3,     TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DDC,  TEGRA_MUX_RSVD2,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_DTA,  TEGRA_MUX_VI,       TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_DTB,  TEGRA_MUX_VI,       TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_DTC,  TEGRA_MUX_VI,       TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_DTD,  TEGRA_MUX_VI,       TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_GMD,  TEGRA_MUX_SFLASH,   TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LPW0, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LPW2, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LSC1, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LSCK, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LSDA, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_PTA,  TEGRA_MUX_RSVD2,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_SLXC, TEGRA_MUX_SDIO3,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_SLXK, TEGRA_MUX_SDIO3,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+};
 
+static struct platform_device *pinmux_devices[] = {
+	&tegra_gpio_device,
+	&tegra_pinmux_device,
+};
 
-
-static struct tegra_gpio_table gpio_table[] = {
+static struct tegra_gpio_table common_gpio_table[] = {
 	{ .gpio = TEGRA_GPIO_SD2_CD,		.enable = true },
 	{ .gpio = TEGRA_GPIO_SD2_WP,		.enable = true },
 	{ .gpio = TEGRA_GPIO_SD2_POWER,		.enable = true },
@@ -171,12 +196,46 @@ static struct tegra_gpio_table gpio_table[] = {
 	{ .gpio = TEGRA_GPIO_USB1,		.enable = true },
 };
 
-void __init seaboard_pinmux_init(void)
+static void __init update_pinmux(struct tegra_pingroup_config *newtbl, int size)
+{
+	int i, j;
+	struct tegra_pingroup_config *new_pingroup, *base_pingroup;
+
+	/* Update base seaboard pinmux table with secondary board
+	 * specific pinmux table table.
+	 */
+	for (i = 0; i < size; i++) {
+		new_pingroup = &newtbl[i];
+		for (j = 0; j < ARRAY_SIZE(seaboard_pinmux); j++) {
+			base_pingroup = &seaboard_pinmux[j];
+			if (new_pingroup->pingroup == base_pingroup->pingroup) {
+				*base_pingroup = *new_pingroup;
+				break;
+			}
+		}
+	}
+}
+
+void __init seaboard_common_pinmux_init(void)
 {
+	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
 	tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
 
 	tegra_drive_pinmux_config_table(seaboard_drive_pinmux,
 					ARRAY_SIZE(seaboard_drive_pinmux));
 
-	tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
+	tegra_gpio_config(common_gpio_table, ARRAY_SIZE(common_gpio_table));
 }
+
+void __init seaboard_pinmux_init(void)
+{
+	seaboard_common_pinmux_init();
+}
+
+void __init ventana_pinmux_init(void)
+{
+	update_pinmux(ventana_pinmux, ARRAY_SIZE(ventana_pinmux));
+	seaboard_common_pinmux_init();
+}
+

arch/arm/mach-tegra/board-trimslice-pinmux.c

@@ -21,6 +21,7 @@
 
 #include "gpio-names.h"
 #include "board-trimslice.h"
+#include "devices.h"
 
 static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
 	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_IDE,           TEGRA_PUPD_NORMAL,	TEGRA_TRI_TRISTATE},
@@ -141,6 +142,11 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
 	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
 };
 
+static struct platform_device *pinmux_devices[] = {
+	&tegra_gpio_device,
+	&tegra_pinmux_device,
+};
+
 static struct tegra_gpio_table gpio_table[] = {
 	{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true	}, /* mmc4 cd */
 	{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true	}, /* mmc4 wp */
@@ -151,6 +157,7 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void __init trimslice_pinmux_init(void)
 {
+	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
 	tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
 	tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
 }

arch/arm/mach-tegra/devices.c

@@ -33,6 +33,90 @@
 #include "gpio-names.h"
 #include "devices.h"
 
+static struct resource gpio_resource[] = {
+	[0] = {
+		.start	= TEGRA_GPIO_BASE,
+		.end	= TEGRA_GPIO_BASE + TEGRA_GPIO_SIZE-1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= INT_GPIO1,
+		.end	= INT_GPIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= INT_GPIO2,
+		.end	= INT_GPIO2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= INT_GPIO3,
+		.end	= INT_GPIO3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[4] = {
+		.start	= INT_GPIO4,
+		.end	= INT_GPIO4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[5] = {
+		.start	= INT_GPIO5,
+		.end	= INT_GPIO5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[6] = {
+		.start	= INT_GPIO6,
+		.end	= INT_GPIO6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[7] = {
+		.start	= INT_GPIO7,
+		.end	= INT_GPIO7,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device tegra_gpio_device = {
+	.name		= "tegra-gpio",
+	.id		= -1,
+	.resource	= gpio_resource,
+	.num_resources	= ARRAY_SIZE(gpio_resource),
+};
+
+static struct resource pinmux_resource[] = {
+	[0] = {
+		/* Tri-state registers */
+		.start	= TEGRA_APB_MISC_BASE + 0x14,
+		.end	= TEGRA_APB_MISC_BASE + 0x20 + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* Mux registers */
+		.start	= TEGRA_APB_MISC_BASE + 0x80,
+		.end	= TEGRA_APB_MISC_BASE + 0x9c + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		/* Pull-up/down registers */
+		.start	= TEGRA_APB_MISC_BASE + 0xa0,
+		.end	= TEGRA_APB_MISC_BASE + 0xb0 + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = {
+		/* Pad control registers */
+		.start	= TEGRA_APB_MISC_BASE + 0x868,
+		.end	= TEGRA_APB_MISC_BASE + 0x90c + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device tegra_pinmux_device = {
+	.name		= "tegra-pinmux",
+	.id		= -1,
+	.resource	= pinmux_resource,
+	.num_resources	= ARRAY_SIZE(pinmux_resource),
+};
+
 static struct resource i2c_resource1[] = {
 	[0] = {
 		.start	= INT_I2C,

arch/arm/mach-tegra/devices.h

@@ -21,6 +21,8 @@
 
 #include <linux/platform_device.h>
 
+extern struct platform_device tegra_gpio_device;
+extern struct platform_device tegra_pinmux_device;
 extern struct platform_device tegra_sdhci_device1;
 extern struct platform_device tegra_sdhci_device2;
 extern struct platform_device tegra_sdhci_device3;

arch/arm/mach-tegra/include/mach/pinmux.h

@@ -199,6 +199,7 @@ struct tegra_drive_pingroup_config {
 
 struct tegra_drive_pingroup_desc {
 	const char *name;
+	s16 reg_bank;
 	s16 reg;
 };
 
@@ -207,6 +208,9 @@ struct tegra_pingroup_desc {
 	int funcs[4];
 	int func_safe;
 	int vddio;
+	s16 tri_bank;	/* Register bank the tri_reg exists within */
+	s16 mux_bank;	/* Register bank the mux_reg exists within */
+	s16 pupd_bank;	/* Register bank the pupd_reg exists within */
 	s16 tri_reg; 	/* offset into the TRISTATE_REG_* register bank */
 	s16 mux_reg;	/* offset into the PIN_MUX_CTL_* register bank */
 	s16 pupd_reg;	/* offset into the PULL_UPDOWN_REG_* register bank */

arch/arm/mach-tegra/pinmux-t2-tables.c

@@ -31,10 +31,16 @@
 #include <mach/pinmux.h>
 #include <mach/suspend.h>
 
+#define TRISTATE_REG_A		0x14
+#define PIN_MUX_CTL_REG_A	0x80
+#define PULLUPDOWN_REG_A	0xa0
+#define PINGROUP_REG_A		0x868
+
 #define DRIVE_PINGROUP(pg_name, r)				\
 	[TEGRA_DRIVE_PINGROUP_ ## pg_name] = {			\
 		.name = #pg_name,				\
-		.reg = r					\
+		.reg_bank = 3,					\
+		.reg = ((r) - PINGROUP_REG_A)			\
 	}
 
 const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = {
@@ -90,11 +96,14 @@ const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE
 			TEGRA_MUX_ ## f3,			\
 		},						\
 		.func_safe = TEGRA_MUX_ ## f_safe,		\
-		.tri_reg = tri_r,				\
+		.tri_bank = 0,					\
+		.tri_reg = ((tri_r) - TRISTATE_REG_A),		\
 		.tri_bit = tri_b,				\
-		.mux_reg = mux_r,				\
+		.mux_bank = 1,					\
+		.mux_reg = ((mux_r) - PIN_MUX_CTL_REG_A),	\
 		.mux_bit = mux_b,				\
-		.pupd_reg = pupd_r,				\
+		.pupd_bank = 2,				\
+		.pupd_reg = ((pupd_r) - PULLUPDOWN_REG_A),	\
 		.pupd_bit = pupd_b,				\
 	}
 
@@ -217,62 +226,3 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = {
 	PINGROUP(XM2C,  DDR,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xA8, 30),
 	PINGROUP(XM2D,  DDR,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xA8, 28),
 };
-
-#ifdef CONFIG_PM
-#define TRISTATE_REG_A         0x14
-#define TRISTATE_REG_NUM       4
-#define PIN_MUX_CTL_REG_A      0x80
-#define PIN_MUX_CTL_REG_NUM    8
-#define PULLUPDOWN_REG_A       0xa0
-#define PULLUPDOWN_REG_NUM     5
-
-static u32 pinmux_reg[TRISTATE_REG_NUM + PIN_MUX_CTL_REG_NUM +
-		      PULLUPDOWN_REG_NUM +
-		      ARRAY_SIZE(tegra_soc_drive_pingroups)];
-
-static inline unsigned long pg_readl(unsigned long offset)
-{
-	return readl(IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
-}
-
-static inline void pg_writel(unsigned long value, unsigned long offset)
-{
-	writel(value, IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
-}
-
-void tegra_pinmux_suspend(void)
-{
-	unsigned int i;
-	u32 *ctx = pinmux_reg;
-
-	for (i = 0; i < PIN_MUX_CTL_REG_NUM; i++)
-		*ctx++ = pg_readl(PIN_MUX_CTL_REG_A + i*4);
-
-	for (i = 0; i < PULLUPDOWN_REG_NUM; i++)
-		*ctx++ = pg_readl(PULLUPDOWN_REG_A + i*4);
-
-	for (i = 0; i < TRISTATE_REG_NUM; i++)
-		*ctx++ = pg_readl(TRISTATE_REG_A + i*4);
-
-	for (i = 0; i < ARRAY_SIZE(tegra_soc_drive_pingroups); i++)
-		*ctx++ = pg_readl(tegra_soc_drive_pingroups[i].reg);
-}
-
-void tegra_pinmux_resume(void)
-{
-	unsigned int i;
-	u32 *ctx = pinmux_reg;
-
-	for (i = 0; i < PIN_MUX_CTL_REG_NUM; i++)
-		pg_writel(*ctx++, PIN_MUX_CTL_REG_A + i*4);
-
-	for (i = 0; i < PULLUPDOWN_REG_NUM; i++)
-		pg_writel(*ctx++, PULLUPDOWN_REG_A + i*4);
-
-	for (i = 0; i < TRISTATE_REG_NUM; i++)
-		pg_writel(*ctx++, TRISTATE_REG_A + i*4);
-
-	for (i = 0; i < ARRAY_SIZE(tegra_soc_drive_pingroups); i++)
-		pg_writel(*ctx++, tegra_soc_drive_pingroups[i].reg);
-}
-#endif

arch/arm/mach-tegra/pinmux.c

@@ -20,6 +20,7 @@
 #include <linux/errno.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 
 #include <mach/iomap.h>
 #include <mach/pinmux.h>
@@ -169,15 +170,17 @@ static const char *pupd_name(unsigned long val)
 	}
 }
 
+static int nbanks;
+static void __iomem **regs;
 
-static inline unsigned long pg_readl(unsigned long offset)
+static inline u32 pg_readl(u32 bank, u32 reg)
 {
-	return readl(IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
+	return readl(regs[bank] + reg);
 }
 
-static inline void pg_writel(unsigned long value, unsigned long offset)
+static inline void pg_writel(u32 val, u32 bank, u32 reg)
 {
-	writel(value, IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
+	writel(val, regs[bank] + reg);
 }
 
 static int tegra_pinmux_set_func(const struct tegra_pingroup_config *config)
@@ -217,10 +220,10 @@ static int tegra_pinmux_set_func(const struct tegra_pingroup_config *config)
 
 	spin_lock_irqsave(&mux_lock, flags);
 
-	reg = pg_readl(pingroups[pg].mux_reg);
+	reg = pg_readl(pingroups[pg].mux_bank, pingroups[pg].mux_reg);
 	reg &= ~(0x3 << pingroups[pg].mux_bit);
 	reg |= mux << pingroups[pg].mux_bit;
-	pg_writel(reg, pingroups[pg].mux_reg);
+	pg_writel(reg, pingroups[pg].mux_bank, pingroups[pg].mux_reg);
 
 	spin_unlock_irqrestore(&mux_lock, flags);
 
@@ -241,11 +244,11 @@ int tegra_pinmux_set_tristate(enum tegra_pingroup pg,
 
 	spin_lock_irqsave(&mux_lock, flags);
 
-	reg = pg_readl(pingroups[pg].tri_reg);
+	reg = pg_readl(pingroups[pg].tri_bank, pingroups[pg].tri_reg);
 	reg &= ~(0x1 << pingroups[pg].tri_bit);
 	if (tristate)
 		reg |= 1 << pingroups[pg].tri_bit;
-	pg_writel(reg, pingroups[pg].tri_reg);
+	pg_writel(reg, pingroups[pg].tri_bank, pingroups[pg].tri_reg);
 
 	spin_unlock_irqrestore(&mux_lock, flags);
 
@@ -272,10 +275,10 @@ int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg,
 
 	spin_lock_irqsave(&mux_lock, flags);
 
-	reg = pg_readl(pingroups[pg].pupd_reg);
+	reg = pg_readl(pingroups[pg].pupd_bank, pingroups[pg].pupd_reg);
 	reg &= ~(0x3 << pingroups[pg].pupd_bit);
 	reg |= pupd << pingroups[pg].pupd_bit;
-	pg_writel(reg, pingroups[pg].pupd_reg);
+	pg_writel(reg, pingroups[pg].pupd_bank, pingroups[pg].pupd_reg);
 
 	spin_unlock_irqrestore(&mux_lock, flags);
 
@@ -362,12 +365,12 @@ static int tegra_drive_pinmux_set_hsm(enum tegra_drive_pingroup pg,
 
 	spin_lock_irqsave(&mux_lock, flags);
 
-	reg = pg_readl(drive_pingroups[pg].reg);
+	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 	if (hsm == TEGRA_HSM_ENABLE)
 		reg |= (1 << 2);
 	else
 		reg &= ~(1 << 2);
-	pg_writel(reg, drive_pingroups[pg].reg);
+	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 
 	spin_unlock_irqrestore(&mux_lock, flags);
 
@@ -387,12 +390,12 @@ static int tegra_drive_pinmux_set_schmitt(enum tegra_drive_pingroup pg,
 
 	spin_lock_irqsave(&mux_lock, flags);
 
-	reg = pg_readl(drive_pingroups[pg].reg);
+	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 	if (schmitt == TEGRA_SCHMITT_ENABLE)
 		reg |= (1 << 3);
 	else
 		reg &= ~(1 << 3);
-	pg_writel(reg, drive_pingroups[pg].reg);
+	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 
 	spin_unlock_irqrestore(&mux_lock, flags);
 
@@ -412,10 +415,10 @@ static int tegra_drive_pinmux_set_drive(enum tegra_drive_pingroup pg,
 
 	spin_lock_irqsave(&mux_lock, flags);
 
-	reg = pg_readl(drive_pingroups[pg].reg);
+	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 	reg &= ~(0x3 << 4);
 	reg |= drive << 4;
-	pg_writel(reg, drive_pingroups[pg].reg);
+	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 
 	spin_unlock_irqrestore(&mux_lock, flags);
 
@@ -435,10 +438,10 @@ static int tegra_drive_pinmux_set_pull_down(enum tegra_drive_pingroup pg,
 
 	spin_lock_irqsave(&mux_lock, flags);
 
-	reg = pg_readl(drive_pingroups[pg].reg);
+	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 	reg &= ~(0x1f << 12);
 	reg |= pull_down << 12;
-	pg_writel(reg, drive_pingroups[pg].reg);
+	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 
 	spin_unlock_irqrestore(&mux_lock, flags);
 
@@ -458,10 +461,10 @@ static int tegra_drive_pinmux_set_pull_up(enum tegra_drive_pingroup pg,
 
 	spin_lock_irqsave(&mux_lock, flags);
 
-	reg = pg_readl(drive_pingroups[pg].reg);
+	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 	reg &= ~(0x1f << 12);
 	reg |= pull_up << 12;
-	pg_writel(reg, drive_pingroups[pg].reg);
+	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 
 	spin_unlock_irqrestore(&mux_lock, flags);
 
@@ -481,10 +484,10 @@ static int tegra_drive_pinmux_set_slew_rising(enum tegra_drive_pingroup pg,
 
 	spin_lock_irqsave(&mux_lock, flags);
 
-	reg = pg_readl(drive_pingroups[pg].reg);
+	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 	reg &= ~(0x3 << 28);
 	reg |= slew_rising << 28;
-	pg_writel(reg, drive_pingroups[pg].reg);
+	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 
 	spin_unlock_irqrestore(&mux_lock, flags);
 
@@ -504,10 +507,10 @@ static int tegra_drive_pinmux_set_slew_falling(enum tegra_drive_pingroup pg,
 
 	spin_lock_irqsave(&mux_lock, flags);
 
-	reg = pg_readl(drive_pingroups[pg].reg);
+	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 	reg &= ~(0x3 << 30);
 	reg |= slew_falling << 30;
-	pg_writel(reg, drive_pingroups[pg].reg);
+	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
 
 	spin_unlock_irqrestore(&mux_lock, flags);
 
@@ -665,6 +668,99 @@ void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *co
 	}
 }
 
+static int __devinit tegra_pinmux_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int i;
+	int config_bad = 0;
+
+	for (i = 0; ; i++) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
+			break;
+	}
+	nbanks = i;
+
+	for (i = 0; i < TEGRA_MAX_PINGROUP; i++) {
+		if (pingroups[i].tri_bank >= nbanks) {
+			dev_err(&pdev->dev, "pingroup %d: bad tri_bank\n", i);
+			config_bad = 1;
+		}
+
+		if (pingroups[i].mux_bank >= nbanks) {
+			dev_err(&pdev->dev, "pingroup %d: bad mux_bank\n", i);
+			config_bad = 1;
+		}
+
+		if (pingroups[i].pupd_bank >= nbanks) {
+			dev_err(&pdev->dev, "pingroup %d: bad pupd_bank\n", i);
+			config_bad = 1;
+		}
+	}
+
+	for (i = 0; i < TEGRA_MAX_DRIVE_PINGROUP; i++) {
+		if (drive_pingroups[i].reg_bank >= nbanks) {
+			dev_err(&pdev->dev,
+				"drive pingroup %d: bad reg_bank\n", i);
+			config_bad = 1;
+		}
+	}
+
+	if (config_bad)
+		return -ENODEV;
+
+	regs = devm_kzalloc(&pdev->dev, nbanks * sizeof(*regs), GFP_KERNEL);
+	if (!regs) {
+		dev_err(&pdev->dev, "Can't alloc regs pointer\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < nbanks; i++) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res) {
+			dev_err(&pdev->dev, "Missing MEM resource\n");
+			return -ENODEV;
+		}
+
+		if (!devm_request_mem_region(&pdev->dev, res->start,
+					    resource_size(res),
+					    dev_name(&pdev->dev))) {
+			dev_err(&pdev->dev,
+				"Couldn't request MEM resource %d\n", i);
+			return -ENODEV;
+		}
+
+		regs[i] = devm_ioremap(&pdev->dev, res->start,
+					resource_size(res));
+		if (!regs) {
+			dev_err(&pdev->dev, "Couldn't ioremap regs %d\n", i);
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static struct of_device_id tegra_pinmux_of_match[] __devinitdata = {
+	{ .compatible = "nvidia,tegra20-pinmux", },
+	{ },
+};
+
+static struct platform_driver tegra_pinmux_driver = {
+	.driver		= {
+		.name	= "tegra-pinmux",
+		.owner	= THIS_MODULE,
+		.of_match_table = tegra_pinmux_of_match,
+	},
+	.probe		= tegra_pinmux_probe,
+};
+
+static int __init tegra_pinmux_init(void)
+{
+	return platform_driver_register(&tegra_pinmux_driver);
+}
+postcore_initcall(tegra_pinmux_init);
+
 #ifdef	CONFIG_DEBUG_FS
 
 #include <linux/debugfs.h>
@@ -684,6 +780,7 @@ static int dbg_pinmux_show(struct seq_file *s, void *unused)
 	int len;
 
 	for (i = 0; i < TEGRA_MAX_PINGROUP; i++) {
+		unsigned long reg;
 		unsigned long tri;
 		unsigned long mux;
 		unsigned long pupd;
@@ -696,8 +793,9 @@ static int dbg_pinmux_show(struct seq_file *s, void *unused)
 			seq_printf(s, "TEGRA_MUX_NONE");
 			len = strlen("NONE");
 		} else {
-			mux = (pg_readl(pingroups[i].mux_reg) >>
-			       pingroups[i].mux_bit) & 0x3;
+			reg = pg_readl(pingroups[i].mux_bank,
+					pingroups[i].mux_reg);
+			mux = (reg >> pingroups[i].mux_bit) & 0x3;
 			if (pingroups[i].funcs[mux] == TEGRA_MUX_RSVD) {
 				seq_printf(s, "TEGRA_MUX_RSVD%1lu", mux+1);
 				len = 5;
@@ -713,8 +811,9 @@ static int dbg_pinmux_show(struct seq_file *s, void *unused)
 			seq_printf(s, "TEGRA_PUPD_NORMAL");
 			len = strlen("NORMAL");
 		} else {
-			pupd = (pg_readl(pingroups[i].pupd_reg) >>
-				pingroups[i].pupd_bit) & 0x3;
+			reg = pg_readl(pingroups[i].pupd_bank,
+					pingroups[i].pupd_reg);
+			pupd = (reg >> pingroups[i].pupd_bit) & 0x3;
 			seq_printf(s, "TEGRA_PUPD_%s", pupd_name(pupd));
 			len = strlen(pupd_name(pupd));
 		}
@@ -723,8 +822,9 @@ static int dbg_pinmux_show(struct seq_file *s, void *unused)
 		if (pingroups[i].tri_reg < 0) {
 			seq_printf(s, "TEGRA_TRI_NORMAL");
 		} else {
-			tri = (pg_readl(pingroups[i].tri_reg) >>
-			       pingroups[i].tri_bit) & 0x1;
+			reg = pg_readl(pingroups[i].tri_bank,
+					pingroups[i].tri_reg);
+			tri = (reg >> pingroups[i].tri_bit) & 0x1;
 
 			seq_printf(s, "TEGRA_TRI_%s", tri_name(tri));
 		}
@@ -759,7 +859,8 @@ static int dbg_drive_pinmux_show(struct seq_file *s, void *unused)
 		dbg_pad_field(s, 7 - len);
 
 
-		reg = pg_readl(drive_pingroups[i].reg);
+		reg = pg_readl(drive_pingroups[i].reg_bank,
+				drive_pingroups[i].reg);
 		if (HSM_EN(reg)) {
 			seq_printf(s, "TEGRA_HSM_ENABLE");
 			len = 16;

arch/arm/plat-mxc/Kconfig

@@ -4,50 +4,31 @@ source "arch/arm/plat-mxc/devices/Kconfig"
 
 menu "Freescale MXC Implementations"
 
-config ARCH_MX50_SUPPORTED
-	bool
-
-config ARCH_MX53_SUPPORTED
-	bool
-
 choice
 	prompt "Freescale CPU family:"
 	default ARCH_MX3
 
-config ARCH_MX1
-	bool "MX1-based"
-	help
-	  This enables support for systems based on the Freescale i.MX1 family
-
-config ARCH_MX2
-	bool "MX2-based"
-	help
-	  This enables support for systems based on the Freescale i.MX2 family
-
-config ARCH_MX25
-	bool "MX25-based"
+config ARCH_IMX_V4_V5
+	bool "i.MX1, i.MX21, i.MX25, i.MX27"
+	select AUTO_ZRELADDR
+	select ARM_PATCH_PHYS_VIRT
 	help
-	  This enables support for systems based on the Freescale i.MX25 family
+	  This enables support for systems based on the Freescale i.MX ARMv4
+	  and ARMv5 SoCs
 
 config ARCH_MX3
 	bool "MX3-based"
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
-config ARCH_MX503
-	bool "i.MX50 + i.MX53"
-	select ARCH_MX50_SUPPORTED
-	select ARCH_MX53_SUPPORTED
+config ARCH_MX5
+	bool "i.MX50, i.MX51, i.MX53"
+	select AUTO_ZRELADDR
+	select ARM_PATCH_PHYS_VIRT
 	help
 	  This enables support for machines using Freescale's i.MX50 and i.MX53
 	  processors.
 
-config ARCH_MX51
-	bool "i.MX51"
-	select ARCH_MX51_SUPPORTED
-	help
-	  This enables support for systems based on the Freescale i.MX51 family
-
 endchoice
 
 source "arch/arm/mach-imx/Kconfig"

arch/arm/plat-mxc/avic.c

@@ -50,6 +50,8 @@
 
 void __iomem *avic_base;
 
+static u32 avic_saved_mask_reg[2];
+
 #ifdef CONFIG_MXC_IRQ_PRIOR
 static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
 {
@@ -90,24 +92,8 @@ static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
 }
 #endif /* CONFIG_FIQ */
 
-/* Disable interrupt number "irq" in the AVIC */
-static void mxc_mask_irq(struct irq_data *d)
-{
-	__raw_writel(d->irq, avic_base + AVIC_INTDISNUM);
-}
-
-/* Enable interrupt number "irq" in the AVIC */
-static void mxc_unmask_irq(struct irq_data *d)
-{
-	__raw_writel(d->irq, avic_base + AVIC_INTENNUM);
-}
 
-static struct mxc_irq_chip mxc_avic_chip = {
-	.base = {
-		.irq_ack = mxc_mask_irq,
-		.irq_mask = mxc_mask_irq,
-		.irq_unmask = mxc_unmask_irq,
-	},
+static struct mxc_extra_irq avic_extra_irq = {
 #ifdef CONFIG_MXC_IRQ_PRIOR
 	.set_priority = avic_irq_set_priority,
 #endif
@@ -116,6 +102,68 @@ static struct mxc_irq_chip mxc_avic_chip = {
 #endif
 };
 
+#ifdef CONFIG_PM
+static void avic_irq_suspend(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = gc->chip_types;
+	int idx = gc->irq_base >> 5;
+
+	avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask);
+	__raw_writel(gc->wake_active, avic_base + ct->regs.mask);
+}
+
+static void avic_irq_resume(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = gc->chip_types;
+	int idx = gc->irq_base >> 5;
+
+	__raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
+}
+
+#else
+#define avic_irq_suspend NULL
+#define avic_irq_resume NULL
+#endif
+
+static __init void avic_init_gc(unsigned int irq_start)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	int idx = irq_start >> 5;
+
+	gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base,
+				    handle_level_irq);
+	gc->private = &avic_extra_irq;
+	gc->wake_enabled = IRQ_MSK(32);
+
+	ct = gc->chip_types;
+	ct->chip.irq_mask = irq_gc_mask_clr_bit;
+	ct->chip.irq_unmask = irq_gc_mask_set_bit;
+	ct->chip.irq_ack = irq_gc_mask_clr_bit;
+	ct->chip.irq_set_wake = irq_gc_set_wake;
+	ct->chip.irq_suspend = avic_irq_suspend;
+	ct->chip.irq_resume = avic_irq_resume;
+	ct->regs.mask = !idx ? AVIC_INTENABLEL : AVIC_INTENABLEH;
+	ct->regs.ack = ct->regs.mask;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
+}
+
+asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
+{
+	u32 nivector;
+
+	do {
+		nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16;
+		if (nivector == 0xffff)
+			break;
+
+		handle_IRQ(nivector, regs);
+	} while (1);
+}
+
 /*
  * This function initializes the AVIC hardware and disables all the
  * interrupts. It registers the interrupt enable and disable functions
@@ -140,11 +188,9 @@ void __init mxc_init_irq(void __iomem *irqbase)
 	/* all IRQ no FIQ */
 	__raw_writel(0, avic_base + AVIC_INTTYPEH);
 	__raw_writel(0, avic_base + AVIC_INTTYPEL);
-	for (i = 0; i < AVIC_NUM_IRQS; i++) {
-		irq_set_chip_and_handler(i, &mxc_avic_chip.base,
-					 handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
+
+	for (i = 0; i < AVIC_NUM_IRQS; i += 32)
+		avic_init_gc(i);
 
 	/* Set default priority value (0) for all IRQ's */
 	for (i = 0; i < 8; i++)
@@ -157,4 +203,3 @@ void __init mxc_init_irq(void __iomem *irqbase)
 
 	printk(KERN_INFO "MXC IRQ initialized\n");
 }
-

arch/arm/plat-mxc/cpu.c

 
 #include <linux/module.h>
+#include <mach/hardware.h>
 
 unsigned int __mxc_cpu_type;
 EXPORT_SYMBOL(__mxc_cpu_type);
@@ -9,3 +10,11 @@ void mxc_set_cpu_type(unsigned int type)
 	__mxc_cpu_type = type;
 }
 
+void imx_print_silicon_rev(const char *cpu, int srev)
+{
+	if (srev == IMX_CHIP_REVISION_UNKNOWN)
+		pr_info("CPU identified as %s, unknown revision\n", cpu);
+	else
+		pr_info("CPU identified as %s, silicon rev %d.%d\n",
+				cpu, (srev >> 4) & 0xf, srev & 0xf);
+}

arch/arm/plat-mxc/include/mach/common.h

@@ -82,4 +82,19 @@ enum mxc_cpu_pwr_mode {
 
 extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
 extern void (*imx_idle)(void);
+extern void imx_print_silicon_rev(const char *cpu, int srev);
+
+void avic_handle_irq(struct pt_regs *);
+void tzic_handle_irq(struct pt_regs *);
+
+#define imx1_handle_irq avic_handle_irq
+#define imx21_handle_irq avic_handle_irq
+#define imx25_handle_irq avic_handle_irq
+#define imx27_handle_irq avic_handle_irq
+#define imx31_handle_irq avic_handle_irq
+#define imx35_handle_irq avic_handle_irq
+#define imx50_handle_irq tzic_handle_irq
+#define imx51_handle_irq tzic_handle_irq
+#define imx53_handle_irq tzic_handle_irq
+
 #endif

arch/arm/plat-mxc/include/mach/entry-macro.S

@@ -9,72 +9,16 @@
  * published by the Free Software Foundation.
  */
 
-#include <mach/hardware.h>
+/* Unused, we use CONFIG_MULTI_IRQ_HANDLER */
 
-#define AVIC_NIMASK	0x04
-
-	@ this macro disables fast irq (not implemented)
 	.macro	disable_fiq
 	.endm
 
 	.macro  get_irqnr_preamble, base, tmp
-#ifndef CONFIG_MXC_TZIC
-	ldr	\base, =avic_base
-	ldr	\base, [\base]
-#ifdef CONFIG_MXC_IRQ_PRIOR
-	ldr	r4, [\base, #AVIC_NIMASK]
-#endif
-#elif defined CONFIG_MXC_TZIC
-	ldr	\base, =tzic_base
-	ldr	\base, [\base]
-#endif /* CONFIG_MXC_TZIC */
 	.endm
 
 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
 
-	@ this macro checks which interrupt occurred
-	@ and returns its number in irqnr
-	@ and returns if an interrupt occurred in irqstat
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-#ifndef CONFIG_MXC_TZIC
-	@ Load offset & priority of the highest priority
-	@ interrupt pending from AVIC_NIVECSR
-	ldr	\irqstat, [\base, #0x40]
-	@ Shift to get the decoded IRQ number, using ASR so
-	@ 'no interrupt pending' becomes 0xffffffff
-	mov	\irqnr, \irqstat, asr #16
-	@ set zero flag if IRQ + 1 == 0
-	adds	\tmp, \irqnr, #1
-#ifdef CONFIG_MXC_IRQ_PRIOR
-	bicne	\tmp, \irqstat, #0xFFFFFFE0
-	strne	\tmp, [\base, #AVIC_NIMASK]
-	streq	r4, [\base, #AVIC_NIMASK]
-#endif
-#elif defined CONFIG_MXC_TZIC
-	@ Load offset & priority of the highest priority
-	@ interrupt pending.
-	@ 0x080 is INTSEC0 register
-	@ 0xD80 is HIPND0 register
-	mov     \irqnr, #0
-1000:	add	\irqstat, \base, \irqnr, lsr #3
-	ldr	\tmp, [\irqstat, #0xd80]
-	ldr	\irqstat, [\irqstat, #0x080]
-	ands	\tmp, \tmp, \irqstat
-	bne	1001f
-	add	\irqnr, \irqnr, #32
-	cmp     \irqnr, #128
-	blo     1000b
-	b       2001f
-1001:	mov     \irqstat, #1
-1002:	tst     \tmp, \irqstat
-	bne     2002f
-	movs    \tmp, \tmp, lsr #1
-	addne   \irqnr, \irqnr, #1
-	bne     1002b
-2001:
-	mov  \irqnr, #0
-2002:
-	movs \irqnr, \irqnr
-#endif
 	.endm

arch/arm/plat-mxc/include/mach/iomux-mx3.h

@@ -735,6 +735,7 @@ enum iomux_pins {
 #define MX31_PIN_KEY_COL5_KEY_COL5	IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_KEY_COL6_KEY_COL6	IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_KEY_COL7_KEY_COL7	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_WATCHDOG_RST__WATCHDOG_RST	IOMUX_MODE(MX31_PIN_WATCHDOG_RST, IOMUX_CONFIG_FUNC)
 
 
 /*

arch/arm/plat-mxc/include/mach/mx25.h

@@ -41,6 +41,7 @@
 #define MX25_SSI2_BASE_ADDR		0x50014000
 #define MX25_SSI1_BASE_ADDR		0x50034000
 #define MX25_NFC_BASE_ADDR		0xbb000000
+#define MX25_IIM_BASE_ADDR		0x53ff0000
 #define MX25_DRYICE_BASE_ADDR		0x53ffc000
 #define MX25_ESDHC1_BASE_ADDR		0x53fb4000
 #define MX25_ESDHC2_BASE_ADDR		0x53fb8000
@@ -104,4 +105,8 @@
 #define MX25_DMA_REQ_SSI1_RX0	28
 #define MX25_DMA_REQ_SSI1_TX0	29
 
+#ifndef __ASSEMBLY__
+extern int mx25_revision(void);
+#endif
+
 #endif /* ifndef __MACH_MX25_H__ */

arch/arm/plat-mxc/include/mach/mx3x.h

@@ -187,22 +187,8 @@
 /* Mandatory defines used globally */
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
-extern unsigned int mx31_cpu_rev;
-extern void mx31_read_cpu_rev(void);
-
-static inline int mx31_revision(void)
-{
-	return mx31_cpu_rev;
-}
-
-extern unsigned int mx35_cpu_rev;
-extern void mx35_read_cpu_rev(void);
-
-static inline int mx35_revision(void)
-{
-	return mx35_cpu_rev;
-}
+extern int mx35_revision(void);
+extern int mx31_revision(void);
 #endif
 
 #endif /* ifndef __MACH_MX3x_H__ */

arch/arm/plat-mxc/irq-common.c

@@ -23,17 +23,17 @@
 
 int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
-	struct mxc_irq_chip *chip;
-	struct irq_chip *base;
+	struct irq_chip_generic *gc;
+	struct mxc_extra_irq *exirq;
 	int ret;
 
 	ret = -ENOSYS;
 
-	base = irq_get_chip(irq);
-	if (base) {
-		chip = container_of(base, struct mxc_irq_chip, base);
-		if (chip->set_priority)
-			ret = chip->set_priority(irq, prio);
+	gc = irq_get_chip_data(irq);
+	if (gc && gc->private) {
+		exirq = gc->private;
+		if (exirq->set_priority)
+			ret = exirq->set_priority(irq, prio);
 	}
 
 	return ret;
@@ -43,15 +43,16 @@ EXPORT_SYMBOL(imx_irq_set_priority);
 int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
 {
 	struct irq_chip_generic *gc;
-	int (*set_irq_fiq)(unsigned int, unsigned int);
+	struct mxc_extra_irq *exirq;
 	int ret;
 
 	ret = -ENOSYS;
 
 	gc = irq_get_chip_data(irq);
 	if (gc && gc->private) {
-		set_irq_fiq = gc->private;
-		ret = set_irq_fiq(irq, type);
+		exirq = gc->private;
+		if (exirq->set_irq_fiq)
+			ret = exirq->set_irq_fiq(irq, type);
 	}
 
 	return ret;

arch/arm/plat-mxc/irq-common.h

@@ -19,9 +19,8 @@
 #ifndef __PLAT_MXC_IRQ_COMMON_H__
 #define __PLAT_MXC_IRQ_COMMON_H__
 
-struct mxc_irq_chip
+struct mxc_extra_irq
 {
-	struct irq_chip	base;
 	int (*set_priority)(unsigned char irq, unsigned char prio);
 	int (*set_irq_fiq)(unsigned int irq, unsigned int type);
 };

arch/arm/plat-mxc/pwm.c

@@ -57,7 +57,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
 		return -EINVAL;
 
-	if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
+	if (!(cpu_is_mx1() || cpu_is_mx21())) {
 		unsigned long long c;
 		unsigned long period_cycles, duty_cycles, prescale;
 		u32 cr;

arch/arm/plat-mxc/tzic.c

@@ -42,7 +42,7 @@
 #define TZIC_SRCCLAR0	0x0280	/* Source Clear Register 0 */
 #define TZIC_PRIORITY0	0x0400	/* Priority Register 0 */
 #define TZIC_PND0	0x0D00	/* Pending Register 0 */
-#define TZIC_HIPND0	0x0D80	/* High Priority Pending Register */
+#define TZIC_HIPND(i)	(0x0D80+ ((i) << 2))	/* High Priority Pending Register */
 #define TZIC_WAKEUP0(i)	(0x0E00 + ((i) << 2))	/* Wakeup Config Register */
 #define TZIC_SWINT	0x0F00	/* Software Interrupt Rigger Register */
 #define TZIC_ID0	0x0FD0	/* Indentification Register 0 */
@@ -74,6 +74,12 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
 
 static unsigned int *wakeup_intr[4];
 
+static struct mxc_extra_irq tzic_extra_irq = {
+#ifdef CONFIG_FIQ
+	.set_irq_fiq = tzic_set_irq_fiq,
+#endif
+};
+
 static __init void tzic_init_gc(unsigned int irq_start)
 {
 	struct irq_chip_generic *gc;
@@ -82,7 +88,7 @@ static __init void tzic_init_gc(unsigned int irq_start)
 
 	gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base,
 				    handle_level_irq);
-	gc->private = tzic_set_irq_fiq;
+	gc->private = &tzic_extra_irq;
 	gc->wake_enabled = IRQ_MSK(32);
 	wakeup_intr[idx] = &gc->wake_active;
 
@@ -96,6 +102,28 @@ static __init void tzic_init_gc(unsigned int irq_start)
 	irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
 }
 
+asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
+{
+	u32 stat;
+	int i, irqofs, handled;
+
+	do {
+		handled = 0;
+
+		for (i = 0; i < 4; i++) {
+			stat = __raw_readl(tzic_base + TZIC_HIPND(i)) &
+				__raw_readl(tzic_base + TZIC_INTSEC0(i));
+
+			while (stat) {
+				handled = 1;
+				irqofs = fls(stat) - 1;
+				handle_IRQ(irqofs + i * 32, regs);
+				stat &= ~(1 << irqofs);
+			}
+		}
+	} while (handled);
+}
+
 /*
  * This function initializes the TZIC hardware and disables all the
  * interrupts. It registers the interrupt enable and disable functions

drivers/gpio/gpio-tegra.c

@@ -20,10 +20,11 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
 
 #include <asm/mach/irq.h>
 
@@ -35,9 +36,7 @@
 #define GPIO_PORT(x)		(((x) >> 3) & 0x3)
 #define GPIO_BIT(x)		((x) & 0x7)
 
-#define GPIO_REG(x)		(IO_TO_VIRT(TEGRA_GPIO_BASE) +	\
-				 GPIO_BANK(x) * 0x80 +		\
-				 GPIO_PORT(x) * 4)
+#define GPIO_REG(x)		(GPIO_BANK(x) * 0x80 + GPIO_PORT(x) * 4)
 
 #define GPIO_CNF(x)		(GPIO_REG(x) + 0x00)
 #define GPIO_OE(x)		(GPIO_REG(x) + 0x10)
@@ -76,15 +75,18 @@ struct tegra_gpio_bank {
 };
 
 
-static struct tegra_gpio_bank tegra_gpio_banks[] = {
-	{.bank = 0, .irq = INT_GPIO1},
-	{.bank = 1, .irq = INT_GPIO2},
-	{.bank = 2, .irq = INT_GPIO3},
-	{.bank = 3, .irq = INT_GPIO4},
-	{.bank = 4, .irq = INT_GPIO5},
-	{.bank = 5, .irq = INT_GPIO6},
-	{.bank = 6, .irq = INT_GPIO7},
-};
+static void __iomem *regs;
+static struct tegra_gpio_bank tegra_gpio_banks[7];
+
+static inline void tegra_gpio_writel(u32 val, u32 reg)
+{
+	__raw_writel(val, regs + reg);
+}
+
+static inline u32 tegra_gpio_readl(u32 reg)
+{
+	return __raw_readl(regs + reg);
+}
 
 static int tegra_gpio_compose(int bank, int port, int bit)
 {
@@ -98,7 +100,7 @@ static void tegra_gpio_mask_write(u32 reg, int gpio, int value)
 	val = 0x100 << GPIO_BIT(gpio);
 	if (value)
 		val |= 1 << GPIO_BIT(gpio);
-	__raw_writel(val, reg);
+	tegra_gpio_writel(val, reg);
 }
 
 void tegra_gpio_enable(int gpio)
@@ -118,7 +120,7 @@ static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 
 static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return (__raw_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
+	return (tegra_gpio_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
 }
 
 static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -155,7 +157,7 @@ static void tegra_gpio_irq_ack(struct irq_data *d)
 {
 	int gpio = d->irq - INT_GPIO_BASE;
 
-	__raw_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
+	tegra_gpio_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
 }
 
 static void tegra_gpio_irq_mask(struct irq_data *d)
@@ -208,10 +210,10 @@ static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 
 	spin_lock_irqsave(&bank->lvl_lock[port], flags);
 
-	val = __raw_readl(GPIO_INT_LVL(gpio));
+	val = tegra_gpio_readl(GPIO_INT_LVL(gpio));
 	val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio));
 	val |= lvl_type << GPIO_BIT(gpio);
-	__raw_writel(val, GPIO_INT_LVL(gpio));
+	tegra_gpio_writel(val, GPIO_INT_LVL(gpio));
 
 	spin_unlock_irqrestore(&bank->lvl_lock[port], flags);
 
@@ -237,12 +239,12 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 	for (port = 0; port < 4; port++) {
 		int gpio = tegra_gpio_compose(bank->bank, port, 0);
-		unsigned long sta = __raw_readl(GPIO_INT_STA(gpio)) &
-			__raw_readl(GPIO_INT_ENB(gpio));
-		u32 lvl = __raw_readl(GPIO_INT_LVL(gpio));
+		unsigned long sta = tegra_gpio_readl(GPIO_INT_STA(gpio)) &
+			tegra_gpio_readl(GPIO_INT_ENB(gpio));
+		u32 lvl = tegra_gpio_readl(GPIO_INT_LVL(gpio));
 
 		for_each_set_bit(pin, &sta, 8) {
-			__raw_writel(1 << pin, GPIO_INT_CLR(gpio));
+			tegra_gpio_writel(1 << pin, GPIO_INT_CLR(gpio));
 
 			/* if gpio is edge triggered, clear condition
 			 * before executing the hander so that we don't
@@ -276,11 +278,11 @@ void tegra_gpio_resume(void)
 
 		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
 			unsigned int gpio = (b<<5) | (p<<3);
-			__raw_writel(bank->cnf[p], GPIO_CNF(gpio));
-			__raw_writel(bank->out[p], GPIO_OUT(gpio));
-			__raw_writel(bank->oe[p], GPIO_OE(gpio));
-			__raw_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio));
-			__raw_writel(bank->int_enb[p], GPIO_INT_ENB(gpio));
+			tegra_gpio_writel(bank->cnf[p], GPIO_CNF(gpio));
+			tegra_gpio_writel(bank->out[p], GPIO_OUT(gpio));
+			tegra_gpio_writel(bank->oe[p], GPIO_OE(gpio));
+			tegra_gpio_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio));
+			tegra_gpio_writel(bank->int_enb[p], GPIO_INT_ENB(gpio));
 		}
 	}
 
@@ -299,11 +301,11 @@ void tegra_gpio_suspend(void)
 
 		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
 			unsigned int gpio = (b<<5) | (p<<3);
-			bank->cnf[p] = __raw_readl(GPIO_CNF(gpio));
-			bank->out[p] = __raw_readl(GPIO_OUT(gpio));
-			bank->oe[p] = __raw_readl(GPIO_OE(gpio));
-			bank->int_enb[p] = __raw_readl(GPIO_INT_ENB(gpio));
-			bank->int_lvl[p] = __raw_readl(GPIO_INT_LVL(gpio));
+			bank->cnf[p] = tegra_gpio_readl(GPIO_CNF(gpio));
+			bank->out[p] = tegra_gpio_readl(GPIO_OUT(gpio));
+			bank->oe[p] = tegra_gpio_readl(GPIO_OE(gpio));
+			bank->int_enb[p] = tegra_gpio_readl(GPIO_INT_ENB(gpio));
+			bank->int_lvl[p] = tegra_gpio_readl(GPIO_INT_LVL(gpio));
 		}
 	}
 	local_irq_restore(flags);
@@ -333,28 +335,55 @@ static struct irq_chip tegra_gpio_irq_chip = {
  */
 static struct lock_class_key gpio_lock_class;
 
-static int __init tegra_gpio_init(void)
+static int __devinit tegra_gpio_probe(struct platform_device *pdev)
 {
+	struct resource *res;
 	struct tegra_gpio_bank *bank;
 	int gpio;
 	int i;
 	int j;
 
+	for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+		if (!res) {
+			dev_err(&pdev->dev, "Missing IRQ resource\n");
+			return -ENODEV;
+		}
+
+		bank = &tegra_gpio_banks[i];
+		bank->bank = i;
+		bank->irq = res->start;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Missing MEM resource\n");
+		return -ENODEV;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, res->start,
+				     resource_size(res),
+				     dev_name(&pdev->dev))) {
+		dev_err(&pdev->dev, "Couldn't request MEM resource\n");
+		return -ENODEV;
+	}
+
+	regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!regs) {
+		dev_err(&pdev->dev, "Couldn't ioremap regs\n");
+		return -ENODEV;
+	}
+
 	for (i = 0; i < 7; i++) {
 		for (j = 0; j < 4; j++) {
 			int gpio = tegra_gpio_compose(i, j, 0);
-			__raw_writel(0x00, GPIO_INT_ENB(gpio));
+			tegra_gpio_writel(0x00, GPIO_INT_ENB(gpio));
 		}
 	}
 
 #ifdef CONFIG_OF_GPIO
-	/*
-	 * This isn't ideal, but it gets things hooked up until this
-	 * driver is converted into a platform_device
-	 */
-	tegra_gpio_chip.of_node = of_find_compatible_node(NULL, NULL,
-						"nvidia,tegra20-gpio");
-#endif /* CONFIG_OF_GPIO */
+	tegra_gpio_chip.of_node = pdev->dev.of_node;
+#endif
 
 	gpiochip_add(&tegra_gpio_chip);
 
@@ -384,6 +413,24 @@ static int __init tegra_gpio_init(void)
 	return 0;
 }
 
+static struct of_device_id tegra_gpio_of_match[] __devinitdata = {
+	{ .compatible = "nvidia,tegra20-gpio", },
+	{ },
+};
+
+static struct platform_driver tegra_gpio_driver = {
+	.driver		= {
+		.name	= "tegra-gpio",
+		.owner	= THIS_MODULE,
+		.of_match_table = tegra_gpio_of_match,
+	},
+	.probe		= tegra_gpio_probe,
+};
+
+static int __init tegra_gpio_init(void)
+{
+	return platform_driver_register(&tegra_gpio_driver);
+}
 postcore_initcall(tegra_gpio_init);
 
 void __init tegra_gpio_config(struct tegra_gpio_table *table, int num)
@@ -416,13 +463,13 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 			seq_printf(s,
 				"%d:%d %02x %02x %02x %02x %02x %02x %06x\n",
 				i, j,
-				__raw_readl(GPIO_CNF(gpio)),
-				__raw_readl(GPIO_OE(gpio)),
-				__raw_readl(GPIO_OUT(gpio)),
-				__raw_readl(GPIO_IN(gpio)),
-				__raw_readl(GPIO_INT_STA(gpio)),
-				__raw_readl(GPIO_INT_ENB(gpio)),
-				__raw_readl(GPIO_INT_LVL(gpio)));
+				tegra_gpio_readl(GPIO_CNF(gpio)),
+				tegra_gpio_readl(GPIO_OE(gpio)),
+				tegra_gpio_readl(GPIO_OUT(gpio)),
+				tegra_gpio_readl(GPIO_IN(gpio)),
+				tegra_gpio_readl(GPIO_INT_STA(gpio)),
+				tegra_gpio_readl(GPIO_INT_ENB(gpio)),
+				tegra_gpio_readl(GPIO_INT_LVL(gpio)));
 		}
 	}
 	return 0;

drivers/mmc/host/davinci_mmc.c

@@ -807,12 +807,25 @@ static void calculate_clk_divider(struct mmc_host *mmc, struct mmc_ios *ios)
 static void mmc_davinci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct mmc_davinci_host *host = mmc_priv(mmc);
+	struct platform_device *pdev = to_platform_device(mmc->parent);
+	struct davinci_mmc_config *config = pdev->dev.platform_data;
 
 	dev_dbg(mmc_dev(host->mmc),
 		"clock %dHz busmode %d powermode %d Vdd %04x\n",
 		ios->clock, ios->bus_mode, ios->power_mode,
 		ios->vdd);
 
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		if (config && config->set_power)
+			config->set_power(pdev->id, false);
+		break;
+	case MMC_POWER_UP:
+		if (config && config->set_power)
+			config->set_power(pdev->id, true);
+		break;
+	}
+
 	switch (ios->bus_width) {
 	case MMC_BUS_WIDTH_8:
 		dev_dbg(mmc_dev(host->mmc), "Enabling 8 bit mode\n");

drivers/usb/host/ohci-at91.c

@@ -35,7 +35,6 @@ extern int usb_disabled(void);
 
 static void at91_start_clock(void)
 {
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
 	clk_enable(hclk);
 	clk_enable(iclk);
 	clk_enable(fclk);
@@ -46,7 +45,6 @@ static void at91_stop_clock(void)
 {
 	clk_disable(fclk);
 	clk_disable(iclk);
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
 	clk_disable(hclk);
 	clocked = 0;
 }
@@ -142,8 +140,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 
 	iclk = clk_get(&pdev->dev, "ohci_clk");
 	fclk = clk_get(&pdev->dev, "uhpck");
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
-		hclk = clk_get(&pdev->dev, "hck0");
+	hclk = clk_get(&pdev->dev, "hclk");
 
 	at91_start_hc(pdev);
 	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -155,7 +152,6 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 	/* Error handling */
 	at91_stop_hc(pdev);
 
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
 	clk_put(hclk);
 	clk_put(fclk);
 	clk_put(iclk);
@@ -192,7 +188,6 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
 
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
 	clk_put(hclk);
 	clk_put(fclk);
 	clk_put(iclk);
@@ -223,6 +218,156 @@ ohci_at91_start (struct usb_hcd *hcd)
 	return 0;
 }
 
+static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
+{
+	if (port < 0 || port >= 2)
+		return;
+
+	gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
+}
+
+static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
+{
+	if (port < 0 || port >= 2)
+		return -EINVAL;
+
+	return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
+}
+
+/*
+ * Update the status data from the hub with the over-current indicator change.
+ */
+static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+	int length = ohci_hub_status_data(hcd, buf);
+	int port;
+
+	for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+		if (pdata->overcurrent_changed[port]) {
+			if (! length)
+				length = 1;
+			buf[0] |= 1 << (port + 1);
+		}
+	}
+
+	return length;
+}
+
+/*
+ * Look at the control requests to the root hub and see if we need to override.
+ */
+static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+				 u16 wIndex, char *buf, u16 wLength)
+{
+	struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+	struct usb_hub_descriptor *desc;
+	int ret = -EINVAL;
+	u32 *data = (u32 *)buf;
+
+	dev_dbg(hcd->self.controller,
+		"ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+		hcd, typeReq, wValue, wIndex, buf, wLength);
+
+	switch (typeReq) {
+	case SetPortFeature:
+		if (wValue == USB_PORT_FEAT_POWER) {
+			dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+			ohci_at91_usb_set_power(pdata, wIndex - 1, 1);
+			goto out;
+		}
+		break;
+
+	case ClearPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: C_OVER_CURRENT\n");
+
+			if (wIndex == 1 || wIndex == 2) {
+				pdata->overcurrent_changed[wIndex-1] = 0;
+				pdata->overcurrent_status[wIndex-1] = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: OVER_CURRENT\n");
+
+			if (wIndex == 1 || wIndex == 2) {
+				pdata->overcurrent_status[wIndex-1] = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: POWER\n");
+
+			if (wIndex == 1 || wIndex == 2) {
+				ohci_at91_usb_set_power(pdata, wIndex - 1, 0);
+				return 0;
+			}
+		}
+		break;
+	}
+
+	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+	if (ret)
+		goto out;
+
+	switch (typeReq) {
+	case GetHubDescriptor:
+
+		/* update the hub's descriptor */
+
+		desc = (struct usb_hub_descriptor *)buf;
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		/* remove the old configurations for power-switching, and
+		 * over-current protection, and insert our new configuration
+		 */
+
+		desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+		desc->wHubCharacteristics |= cpu_to_le16(0x0001);
+
+		if (pdata->overcurrent_supported) {
+			desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+			desc->wHubCharacteristics |=  cpu_to_le16(0x0008|0x0001);
+		}
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		return ret;
+
+	case GetPortStatus:
+		/* check port status */
+
+		dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+		if (wIndex == 1 || wIndex == 2) {
+			if (! ohci_at91_usb_get_power(pdata, wIndex-1)) {
+				*data &= ~cpu_to_le32(RH_PS_PPS);
+			}
+
+			if (pdata->overcurrent_changed[wIndex-1]) {
+				*data |= cpu_to_le32(RH_PS_OCIC);
+			}
+
+			if (pdata->overcurrent_status[wIndex-1]) {
+				*data |= cpu_to_le32(RH_PS_POCI);
+			}
+		}
+	}
+
+ out:
+	return ret;
+}
+
 /*-------------------------------------------------------------------------*/
 
 static const struct hc_driver ohci_at91_hc_driver = {
@@ -258,8 +403,8 @@ static const struct hc_driver ohci_at91_hc_driver = {
 	/*
 	 * root hub support
 	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
+	.hub_status_data =	ohci_at91_hub_status_data,
+	.hub_control =		ohci_at91_hub_control,
 #ifdef CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
@@ -269,22 +414,71 @@ static const struct hc_driver ohci_at91_hc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
+static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct at91_usbh_data *pdata = pdev->dev.platform_data;
+	int val, gpio, port;
+
+	/* From the GPIO notifying the over-current situation, find
+	 * out the corresponding port */
+	gpio = irq_to_gpio(irq);
+	for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+		if (pdata->overcurrent_pin[port] == gpio)
+			break;
+	}
+
+	if (port == ARRAY_SIZE(pdata->overcurrent_pin)) {
+		dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
+		return IRQ_HANDLED;
+	}
+
+	val = gpio_get_value(gpio);
+
+	/* When notified of an over-current situation, disable power
+	   on the corresponding port, and mark this port in
+	   over-current. */
+	if (! val) {
+		ohci_at91_usb_set_power(pdata, port, 0);
+		pdata->overcurrent_status[port]  = 1;
+		pdata->overcurrent_changed[port] = 1;
+	}
+
+	dev_dbg(& pdev->dev, "overcurrent situation %s\n",
+		val ? "exited" : "notified");
+
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
 static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 {
 	struct at91_usbh_data	*pdata = pdev->dev.platform_data;
 	int			i;
 
 	if (pdata) {
-		/* REVISIT make the driver support per-port power switching,
-		 * and also overcurrent detection.  Here we assume the ports
-		 * are always powered while this driver is active, and use
-		 * active-low power switches.
-		 */
 		for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
 			if (pdata->vbus_pin[i] <= 0)
 				continue;
 			gpio_request(pdata->vbus_pin[i], "ohci_vbus");
-			gpio_direction_output(pdata->vbus_pin[i], 0);
+			ohci_at91_usb_set_power(pdata, i, 1);
+		}
+
+		for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+			int ret;
+
+			if (pdata->overcurrent_pin[i] <= 0)
+				continue;
+			gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent");
+
+			ret = request_irq(gpio_to_irq(pdata->overcurrent_pin[i]),
+					  ohci_hcd_at91_overcurrent_irq,
+					  IRQF_SHARED, "ohci_overcurrent", pdev);
+			if (ret) {
+				gpio_free(pdata->overcurrent_pin[i]);
+				dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n");
+			}
 		}
 	}
 
@@ -301,9 +495,16 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
 		for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
 			if (pdata->vbus_pin[i] <= 0)
 				continue;
-			gpio_direction_output(pdata->vbus_pin[i], 1);
+			ohci_at91_usb_set_power(pdata, i, 0);
 			gpio_free(pdata->vbus_pin[i]);
 		}
+
+		for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+			if (pdata->overcurrent_pin[i] <= 0)
+				continue;
+			free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev);
+			gpio_free(pdata->overcurrent_pin[i]);
+		}
 	}
 
 	device_init_wakeup(&pdev->dev, 0);