media: v4l: fwnode: Make use of newly specified bus types

Add support for parsing CSI-2 D-PHY, parallel or Bt.656 bus explicitly.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/v4l2-core/v4l2-fwnode.c

@@ -123,8 +123,16 @@ static int v4l2_fwnode_endpoint_parse_csi2_bus(struct fwnode_handle *fwnode,
 	return 0;
 }
 
+#define PARALLEL_MBUS_FLAGS (V4L2_MBUS_HSYNC_ACTIVE_HIGH |	\
+			     V4L2_MBUS_HSYNC_ACTIVE_LOW |	\
+			     V4L2_MBUS_VSYNC_ACTIVE_HIGH |	\
+			     V4L2_MBUS_VSYNC_ACTIVE_LOW |	\
+			     V4L2_MBUS_FIELD_EVEN_HIGH |	\
+			     V4L2_MBUS_FIELD_EVEN_LOW)
+
 static void v4l2_fwnode_endpoint_parse_parallel_bus(
-	struct fwnode_handle *fwnode, struct v4l2_fwnode_endpoint *vep)
+	struct fwnode_handle *fwnode, struct v4l2_fwnode_endpoint *vep,
+	enum v4l2_fwnode_bus_type bus_type)
 {
 	struct v4l2_fwnode_bus_parallel *bus = &vep->bus.parallel;
 	unsigned int flags = 0;
@@ -189,16 +197,23 @@ static void v4l2_fwnode_endpoint_parse_parallel_bus(
 		pr_debug("data-enable-active %s\n", v ? "high" : "low");
 	}
 
+	switch (bus_type) {
+	default:
 		bus->flags = flags;
-	if (flags & (V4L2_MBUS_HSYNC_ACTIVE_HIGH |
-		     V4L2_MBUS_HSYNC_ACTIVE_LOW |
-		     V4L2_MBUS_VSYNC_ACTIVE_HIGH |
-		     V4L2_MBUS_VSYNC_ACTIVE_LOW |
-		     V4L2_MBUS_FIELD_EVEN_HIGH |
-		     V4L2_MBUS_FIELD_EVEN_LOW))
+		if (flags & PARALLEL_MBUS_FLAGS)
 			vep->bus_type = V4L2_MBUS_PARALLEL;
 		else
 			vep->bus_type = V4L2_MBUS_BT656;
+		break;
+	case V4L2_FWNODE_BUS_TYPE_PARALLEL:
+		vep->bus_type = V4L2_MBUS_PARALLEL;
+		bus->flags = flags;
+		break;
+	case V4L2_FWNODE_BUS_TYPE_BT656:
+		vep->bus_type = V4L2_MBUS_BT656;
+		bus->flags = flags & ~PARALLEL_MBUS_FLAGS;
+		break;
+	}
 }
 
 static void
@@ -258,13 +273,26 @@ static int __v4l2_fwnode_endpoint_parse(struct fwnode_handle *fwnode,
 			return rval;
 
 		if (vep->bus_type == V4L2_MBUS_UNKNOWN)
-			v4l2_fwnode_endpoint_parse_parallel_bus(fwnode, vep);
+			v4l2_fwnode_endpoint_parse_parallel_bus(
+				fwnode, vep, V4L2_MBUS_UNKNOWN);
 
 		break;
 	case V4L2_FWNODE_BUS_TYPE_CCP2:
 	case V4L2_FWNODE_BUS_TYPE_CSI1:
 		v4l2_fwnode_endpoint_parse_csi1_bus(fwnode, vep, bus_type);
 
+		break;
+	case V4L2_FWNODE_BUS_TYPE_CSI2_DPHY:
+		vep->bus_type = V4L2_MBUS_CSI2_DPHY;
+		rval = v4l2_fwnode_endpoint_parse_csi2_bus(fwnode, vep);
+		if (rval)
+			return rval;
+
+		break;
+	case V4L2_FWNODE_BUS_TYPE_PARALLEL:
+	case V4L2_FWNODE_BUS_TYPE_BT656:
+		v4l2_fwnode_endpoint_parse_parallel_bus(fwnode, vep, bus_type);
+
 		break;
 	default:
 		pr_warn("unsupported bus type %u\n", bus_type);