net: phy: Move Omega PHY entry to Cygnus PHY driver

Cygnus and Omega are part of the same business unit and product line, it
makes sense to group PHY entries by products such that a platform can
select only the drivers that it needs. Bring all the functionality that
the BCM7XXX_28NM_GPHY() macro hides for us and remove the Omega PHY
entry from bcm7xxx.c.

As an added bonus, we now have a proper mdio_device_id entry to permit
auto-loading.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/Kconfig

@@ -271,12 +271,13 @@ config BCM87XX_PHY
 
 config BCM_CYGNUS_PHY
 	tristate "Broadcom Cygnus SoC internal PHY"
-	depends on ARCH_BCM_CYGNUS || COMPILE_TEST
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
 	depends on MDIO_BCM_IPROC
+	tristate "Broadcom Cygnus/Omega SoC internal PHY"
 	select BCM_NET_PHYLIB
 	---help---
 	  This PHY driver is for the 1G internal PHYs of the Broadcom
-	  Cygnus Family SoC.
+	  Cygnus and Omega Family SoC.
 
 	  Currently supports internal PHY's used in the BCM11300,
 	  BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,

drivers/net/phy/bcm-cygnus.c

@@ -10,6 +10,10 @@
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 
+struct bcm_omega_phy_priv {
+	u64	*stats;
+};
+
 /* Broadcom Cygnus Phy specific registers */
 #define MII_BCM_CYGNUS_AFE_VDAC_ICTRL_0  0x91E5 /* VDAL Control register */
 
@@ -121,6 +125,130 @@ static int bcm_cygnus_resume(struct phy_device *phydev)
 	return genphy_config_aneg(phydev);
 }
 
+static int bcm_omega_config_init(struct phy_device *phydev)
+{
+	u8 count, rev;
+	int ret = 0;
+
+	rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
+
+	pr_info_once("%s: %s PHY revision: 0x%02x\n",
+		     phydev_name(phydev), phydev->drv->name, rev);
+
+	/* Dummy read to a register to workaround an issue upon reset where the
+	 * internal inverter may not allow the first MDIO transaction to pass
+	 * the MDIO management controller and make us return 0xffff for such
+	 * reads.
+	 */
+	phy_read(phydev, MII_BMSR);
+
+	switch (rev) {
+	case 0x00:
+		ret = bcm_phy_28nm_a0b0_afe_config_init(phydev);
+		break;
+	default:
+		break;
+	}
+
+	if (ret)
+		return ret;
+
+	ret = bcm_phy_downshift_get(phydev, &count);
+	if (ret)
+		return ret;
+
+	/* Only enable EEE if Wirespeed/downshift is disabled */
+	ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE);
+	if (ret)
+		return ret;
+
+	return bcm_phy_enable_apd(phydev, true);
+}
+
+static int bcm_omega_resume(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Re-apply workarounds coming out suspend/resume */
+	ret = bcm_omega_config_init(phydev);
+	if (ret)
+		return ret;
+
+	/* 28nm Gigabit PHYs come out of reset without any half-duplex
+	 * or "hub" compliant advertised mode, fix that. This does not
+	 * cause any problems with the PHY library since genphy_config_aneg()
+	 * gracefully handles auto-negotiated and forced modes.
+	 */
+	return genphy_config_aneg(phydev);
+}
+
+static int bcm_omega_get_tunable(struct phy_device *phydev,
+				 struct ethtool_tunable *tuna, void *data)
+{
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		return bcm_phy_downshift_get(phydev, (u8 *)data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int bcm_omega_set_tunable(struct phy_device *phydev,
+				 struct ethtool_tunable *tuna,
+				 const void *data)
+{
+	u8 count = *(u8 *)data;
+	int ret;
+
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		ret = bcm_phy_downshift_set(phydev, count);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	if (ret)
+		return ret;
+
+	/* Disable EEE advertisement since this prevents the PHY
+	 * from successfully linking up, trigger auto-negotiation restart
+	 * to let the MAC decide what to do.
+	 */
+	ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE);
+	if (ret)
+		return ret;
+
+	return genphy_restart_aneg(phydev);
+}
+
+static void bcm_omega_get_phy_stats(struct phy_device *phydev,
+				    struct ethtool_stats *stats, u64 *data)
+{
+	struct bcm_omega_phy_priv *priv = phydev->priv;
+
+	bcm_phy_get_stats(phydev, priv->stats, stats, data);
+}
+
+static int bcm_omega_probe(struct phy_device *phydev)
+{
+	struct bcm_omega_phy_priv *priv;
+
+	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	priv->stats = devm_kcalloc(&phydev->mdio.dev,
+				   bcm_phy_get_sset_count(phydev), sizeof(u64),
+				   GFP_KERNEL);
+	if (!priv->stats)
+		return -ENOMEM;
+
+	return 0;
+}
+
 static struct phy_driver bcm_cygnus_phy_driver[] = {
 {
 	.phy_id        = PHY_ID_BCM_CYGNUS,
@@ -132,10 +260,27 @@ static struct phy_driver bcm_cygnus_phy_driver[] = {
 	.config_intr   = bcm_phy_config_intr,
 	.suspend       = genphy_suspend,
 	.resume        = bcm_cygnus_resume,
-} };
+}, {
+	.phy_id		= PHY_ID_BCM_OMEGA,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom Omega Combo GPHY",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_IS_INTERNAL,
+	.config_init	= bcm_omega_config_init,
+	.suspend	= genphy_suspend,
+	.resume		= bcm_omega_resume,
+	.get_tunable	= bcm_omega_get_tunable,
+	.set_tunable	= bcm_omega_set_tunable,
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm_omega_get_phy_stats,
+	.probe		= bcm_omega_probe,
+}
+};
 
 static struct mdio_device_id __maybe_unused bcm_cygnus_phy_tbl[] = {
 	{ PHY_ID_BCM_CYGNUS, 0xfffffff0, },
+	{ PHY_ID_BCM_OMEGA, 0xfffffff0, },
 	{ }
 };
 MODULE_DEVICE_TABLE(mdio, bcm_cygnus_phy_tbl);

drivers/net/phy/bcm7xxx.c

@@ -590,7 +590,6 @@ static struct phy_driver bcm7xxx_driver[] = {
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7439_2, "Broadcom BCM7439 (2)"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
-	BCM7XXX_28NM_GPHY(PHY_ID_BCM_OMEGA, "Broadcom Omega Combo GPHY"),
 	BCM7XXX_40NM_EPHY(PHY_ID_BCM7346, "Broadcom BCM7346"),
 	BCM7XXX_40NM_EPHY(PHY_ID_BCM7362, "Broadcom BCM7362"),
 	BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"),