[ide] aec62xx: kill /proc/ide/aec62xx

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/pci/aec62xx.c

@@ -18,52 +18,7 @@
 
 #include "aec62xx.h"
 
-#if defined(DISPLAY_AEC62XX_TIMINGS) && defined(CONFIG_PROC_FS)
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
-
-static u8 aec62xx_proc = 0;
-
-#define AEC_MAX_DEVS		5
-
-static struct pci_dev *aec_devs[AEC_MAX_DEVS];
-static int n_aec_devs;
-
-static int aec62xx_get_info (char *buffer, char **addr, off_t offset, int count)
-{
-	char *p = buffer;
-	char *chipset_nums[] = {"error", "error", "error", "error",
-				"error", "error", "850UF",   "860",
-				 "860R",   "865",  "865R", "error"  };
-	int len;
-	int i;
-
-	for (i = 0; i < n_aec_devs; i++) {
-		struct pci_dev *dev	= aec_devs[i];
-		unsigned long iobase = pci_resource_start(dev, 4);
-		u8 c0 = 0, c1 = 0, art	= 0;
-
-		c0 = inb(iobase + 0x02);
-		c1 = inb(iobase + 0x0a);
-
-		p += sprintf(p, "\nController: %d\n", i);
-		p += sprintf(p, "Chipset: AEC%s\n", chipset_nums[dev->device]);
-
-		p += sprintf(p, "--------------- Primary Channel "
-				"---------------- Secondary Channel "
-				"-------------\n");
-		(void) pci_read_config_byte(dev, 0x4a, &art);
-		p += sprintf(p, "                %sabled ",
-			(art&0x02)?" en":"dis");
-		p += sprintf(p, "                        %sabled\n",
-			(art&0x04)?" en":"dis");
-		p += sprintf(p, "--------------- drive0 --------- drive1 "
-				"-------- drive0 ---------- drive1 ------\n");
-		p += sprintf(p, "DMA enabled:    %s              %s ",
-			(c0&0x20)?"yes":"no ",(c0&0x40)?"yes":"no ");
-		p += sprintf(p, "            %s               %s\n",
-			(c1&0x20)?"yes":"no ",(c1&0x40)?"yes":"no ");
-
+#if 0
 		if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
 			(void) pci_read_config_byte(dev, 0x54, &art);
 			p += sprintf(p, "DMA Mode:       %s(%s)",
@@ -79,59 +34,7 @@ static int aec62xx_get_info (char *buffer, char **addr, off_t offset, int count)
 				(c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO",
 				(art&0x80)?"2":(art&0x40)?"1":"0");
 		} else {
-			/*
-			 * case PCI_DEVICE_ID_ARTOP_ATP860:
-			 * case PCI_DEVICE_ID_ARTOP_ATP860R:
-			 * case PCI_DEVICE_ID_ARTOP_ATP865:
-			 * case PCI_DEVICE_ID_ARTOP_ATP865R:
-			 */
-			(void) pci_read_config_byte(dev, 0x44, &art);
-			p += sprintf(p, "DMA Mode:       %s(%s)",
-				(c0&0x20)?((art&0x07)?"UDMA":" DMA"):" PIO",
-				((art&0x07)==0x07)?"6":
-				((art&0x06)==0x06)?"5":
-				((art&0x05)==0x05)?"4":
-				((art&0x04)==0x04)?"3":
-				((art&0x03)==0x03)?"2":
-				((art&0x02)==0x02)?"1":
-				((art&0x01)==0x01)?"0":"?");
-			p += sprintf(p, "          %s(%s)",
-				(c0&0x40)?((art&0x70)?"UDMA":" DMA"):" PIO",
-				((art&0x70)==0x70)?"6":
-				((art&0x60)==0x60)?"5":
-				((art&0x50)==0x50)?"4":
-				((art&0x40)==0x40)?"3":
-				((art&0x30)==0x30)?"2":
-				((art&0x20)==0x20)?"1":
-				((art&0x10)==0x10)?"0":"?");
-			(void) pci_read_config_byte(dev, 0x45, &art);
-			p += sprintf(p, "         %s(%s)",
-				(c1&0x20)?((art&0x07)?"UDMA":" DMA"):" PIO",
-				((art&0x07)==0x07)?"6":
-				((art&0x06)==0x06)?"5":
-				((art&0x05)==0x05)?"4":
-				((art&0x04)==0x04)?"3":
-				((art&0x03)==0x03)?"2":
-				((art&0x02)==0x02)?"1":
-				((art&0x01)==0x01)?"0":"?");
-			p += sprintf(p, "           %s(%s)\n",
-				(c1&0x40)?((art&0x70)?"UDMA":" DMA"):" PIO",
-				((art&0x70)==0x70)?"6":
-				((art&0x60)==0x60)?"5":
-				((art&0x50)==0x50)?"4":
-				((art&0x40)==0x40)?"3":
-				((art&0x30)==0x30)?"2":
-				((art&0x20)==0x20)?"1":
-				((art&0x10)==0x10)?"0":"?");
-		}
-	}
-	/* p - buffer must be less than 4k! */
-	len = (p - buffer) - offset;
-	*addr = buffer + offset;
-	
-	return len > count ? count : len;
-}
-#endif	/* defined(DISPLAY_AEC62xx_TIMINGS) && defined(CONFIG_PROC_FS) */
+#endif
 
 /*
  * TO DO: active tuning and correction of cards without a bios.
@@ -375,15 +278,6 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
 		printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
 	}
 
-#if defined(DISPLAY_AEC62XX_TIMINGS) && defined(CONFIG_PROC_FS)
-	aec_devs[n_aec_devs++] = dev;
-
-	if (!aec62xx_proc) {
-		aec62xx_proc = 1;
-		ide_pci_create_host_proc("aec62xx", aec62xx_get_info);
-	}
-#endif /* DISPLAY_AEC62XX_TIMINGS && CONFIG_PROC_FS */
-
 	if (bus_speed <= 33)
 		pci_set_drvdata(dev, (void *) aec6xxx_33_base);
 	else

drivers/ide/pci/aec62xx.h

@@ -5,8 +5,6 @@
 #include <linux/pci.h>
 #include <linux/ide.h>
 
-#define DISPLAY_AEC62XX_TIMINGS
-
 struct chipset_bus_clock_list_entry {
 	byte		xfer_speed;
 	byte		chipset_settings;