mtd: gpio-nand: Ability to use driver for configurations without RDY-pin

In some configurations of "gpio-nand" RDY-pin may be not connected.
This patch allow to use driver for these configurations. In this case
we are assume that device always ready.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

drivers/mtd/nand/gpio.c

@@ -134,7 +134,11 @@ static void gpio_nand_readbuf16(struct mtd_info *mtd, u_char *buf, int len)
 static int gpio_nand_devready(struct mtd_info *mtd)
 {
 	struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
+
+	if (gpio_is_valid(gpiomtd->plat.gpio_rdy))
 		return gpio_get_value(gpiomtd->plat.gpio_rdy);
+
+	return 1;
 }
 
 #ifdef CONFIG_OF
@@ -252,6 +256,7 @@ static int __devexit gpio_nand_remove(struct platform_device *dev)
 	gpio_free(gpiomtd->plat.gpio_nce);
 	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
 		gpio_free(gpiomtd->plat.gpio_nwp);
+	if (gpio_is_valid(gpiomtd->plat.gpio_rdy))
 		gpio_free(gpiomtd->plat.gpio_rdy);
 
 	kfree(gpiomtd);
@@ -336,10 +341,12 @@ static int __devinit gpio_nand_probe(struct platform_device *dev)
 	if (ret)
 		goto err_cle;
 	gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
+	if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) {
 		ret = gpio_request(gpiomtd->plat.gpio_rdy, "NAND RDY");
 		if (ret)
 			goto err_rdy;
 		gpio_direction_input(gpiomtd->plat.gpio_rdy);
+	}
 
 
 	this->IO_ADDR_W  = this->IO_ADDR_R;
@@ -386,6 +393,7 @@ static int __devinit gpio_nand_probe(struct platform_device *dev)
 err_wp:
 	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
 		gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
+	if (gpio_is_valid(gpiomtd->plat.gpio_rdy))
 		gpio_free(gpiomtd->plat.gpio_rdy);
 err_rdy:
 	gpio_free(gpiomtd->plat.gpio_cle);