ath10k: fix monitor start/stop sequences

Fix some cases where monitor start failure left
the driver in a confused state.

This also makes the monitor code simpler.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/core.h

@@ -472,7 +472,6 @@ struct ath10k {
 	struct cfg80211_chan_def chandef;
 
 	int free_vdev_map;
-	bool promisc;
 	bool monitor;
 	int monitor_vdev_id;
 	bool monitor_started;

drivers/net/wireless/ath/ath10k/mac.c

@@ -493,19 +493,6 @@ static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
 	return 0;
 }
 
-static bool ath10k_monitor_is_enabled(struct ath10k *ar)
-{
-	lockdep_assert_held(&ar->conf_mutex);
-
-	ath10k_dbg(ar, ATH10K_DBG_MAC,
-		   "mac monitor refs: promisc %d monitor %d cac %d\n",
-		   ar->promisc, ar->monitor,
-		   test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags));
-
-	return ar->promisc || ar->monitor ||
-	       test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
-}
-
 static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
 {
 	struct cfg80211_chan_def *chandef = &ar->chandef;
@@ -649,16 +636,6 @@ static int ath10k_monitor_start(struct ath10k *ar)
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-	if (!ath10k_monitor_is_enabled(ar)) {
-		ath10k_warn(ar, "trying to start monitor with no references\n");
-		return 0;
-	}
-
-	if (ar->monitor_started) {
-		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor already started\n");
-		return 0;
-	}
-
 	ret = ath10k_monitor_vdev_create(ar);
 	if (ret) {
 		ath10k_warn(ar, "failed to create monitor vdev: %d\n", ret);
@@ -678,34 +655,51 @@ static int ath10k_monitor_start(struct ath10k *ar)
 	return 0;
 }
 
-static void ath10k_monitor_stop(struct ath10k *ar)
+static int ath10k_monitor_stop(struct ath10k *ar)
 {
 	int ret;
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-	if (ath10k_monitor_is_enabled(ar)) {
-		ath10k_dbg(ar, ATH10K_DBG_MAC,
-			   "mac monitor will be stopped later\n");
-		return;
-	}
-
-	if (!ar->monitor_started) {
-		ath10k_dbg(ar, ATH10K_DBG_MAC,
-			   "mac monitor probably failed to start earlier\n");
-		return;
-	}
-
 	ret = ath10k_monitor_vdev_stop(ar);
-	if (ret)
+	if (ret) {
 		ath10k_warn(ar, "failed to stop monitor vdev: %d\n", ret);
+		return ret;
+	}
 
 	ret = ath10k_monitor_vdev_delete(ar);
-	if (ret)
+	if (ret) {
 		ath10k_warn(ar, "failed to delete monitor vdev: %d\n", ret);
+		return ret;
+	}
 
 	ar->monitor_started = false;
 	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor stopped\n");
+
+	return 0;
+}
+
+static int ath10k_monitor_recalc(struct ath10k *ar)
+{
+	bool should_start;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	should_start = ar->monitor ||
+		       ar->filter_flags & FIF_PROMISC_IN_BSS ||
+		       test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC,
+		   "mac monitor recalc started? %d should? %d\n",
+		   ar->monitor_started, should_start);
+
+	if (should_start == ar->monitor_started)
+		return 0;
+
+	if (should_start)
+		return ath10k_monitor_start(ar);
+	else
+		return ath10k_monitor_stop(ar);
 }
 
 static int ath10k_recalc_rtscts_prot(struct ath10k_vif *arvif)
@@ -736,7 +730,7 @@ static int ath10k_start_cac(struct ath10k *ar)
 
 	set_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
 
-	ret = ath10k_monitor_start(ar);
+	ret = ath10k_monitor_recalc(ar);
 	if (ret) {
 		ath10k_warn(ar, "failed to start monitor (cac): %d\n", ret);
 		clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
@@ -2369,12 +2363,14 @@ void ath10k_halt(struct ath10k *ar)
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-	if (ath10k_monitor_is_enabled(ar)) {
 	clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
-		ar->promisc = false;
+	ar->filter_flags = 0;
 	ar->monitor = false;
+
+	if (ar->monitor_started)
 		ath10k_monitor_stop(ar);
-	}
+
+	ar->monitor_started = false;
 
 	ath10k_scan_finish(ar);
 	ath10k_peer_cleanup_all(ar);
@@ -2629,7 +2625,7 @@ static void ath10k_config_chan(struct ath10k *ar)
 	/* First stop monitor interface. Some FW versions crash if there's a
 	 * lone monitor interface. */
 	if (ar->monitor_started)
-		ath10k_monitor_vdev_stop(ar);
+		ath10k_monitor_stop(ar);
 
 	list_for_each_entry(arvif, &ar->arvifs, list) {
 		if (!arvif->is_started)
@@ -2677,8 +2673,7 @@ static void ath10k_config_chan(struct ath10k *ar)
 		}
 	}
 
-	if (ath10k_monitor_is_enabled(ar))
-		ath10k_monitor_vdev_start(ar, ar->monitor_vdev_id);
+	ath10k_monitor_recalc(ar);
 }
 
 static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
@@ -2733,19 +2728,10 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
 		ath10k_config_ps(ar);
 
 	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
-		if (conf->flags & IEEE80211_CONF_MONITOR && !ar->monitor) {
-			ar->monitor = true;
-			ret = ath10k_monitor_start(ar);
-			if (ret) {
-				ath10k_warn(ar, "failed to start monitor (config): %d\n",
-					    ret);
-				ar->monitor = false;
-			}
-		} else if (!(conf->flags & IEEE80211_CONF_MONITOR) &&
-			   ar->monitor) {
-			ar->monitor = false;
-			ath10k_monitor_stop(ar);
-		}
+		ar->monitor = conf->flags & IEEE80211_CONF_MONITOR;
+		ret = ath10k_monitor_recalc(ar);
+		if (ret)
+			ath10k_warn(ar, "failed to recalc monitor: %d\n", ret);
 	}
 
 	mutex_unlock(&ar->conf_mutex);
@@ -3009,18 +2995,9 @@ static void ath10k_configure_filter(struct ieee80211_hw *hw,
 	*total_flags &= SUPPORTED_FILTERS;
 	ar->filter_flags = *total_flags;
 
-	if (ar->filter_flags & FIF_PROMISC_IN_BSS && !ar->promisc) {
-		ar->promisc = true;
-		ret = ath10k_monitor_start(ar);
-		if (ret) {
-			ath10k_warn(ar, "failed to start monitor (promisc): %d\n",
-				    ret);
-			ar->promisc = false;
-		}
-	} else if (!(ar->filter_flags & FIF_PROMISC_IN_BSS) && ar->promisc) {
-		ar->promisc = false;
-		ath10k_monitor_stop(ar);
-	}
+	ret = ath10k_monitor_recalc(ar);
+	if (ret)
+		ath10k_warn(ar, "failed to recalc montior: %d\n", ret);
 
 	mutex_unlock(&ar->conf_mutex);
 }