Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal

Pull thermal SoC updates from Zhang Rui:
 "Thermal SoC management updates:

   - imx thermal driver now supports i.MX7 thermal sensor (Anson Huang)

   - exynos thermal driver dropped support for exynos 5440 (Krzysztof
     Kozlowski)

   - rcar_thermal now supports r8a77995 (Yoshihiro Kaneko)

   - rcar_gen3_thermal now supports r8a77965 (Niklas Söderlund)

   - qcom-spmi-temp-alarm now supports GEN2 PMIC peripherals (David
     Collins)

   - uniphier thermal now supports UniPhier PXs3 (Kunihiko Hayashi)

   - mediatek thermal now supports MT7622 SoC (Sean Wang)

   - considerable refactoring of exynos driver (Bartlomiej
     Zolnierkiewicz)

   - small fixes all over the place on different drivers"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (50 commits)
  thermal: qcom: tsens: Allow number of sensors to come from DT
  thermal: tegra: soctherm: add const to struct thermal_cooling_device_ops
  thermal: exynos: Reduce severity of too early temperature read
  thermal: imx: Switch to SPDX identifier
  thermal: qcom-spmi-temp-alarm: add support for GEN2 PMIC peripherals
  thermal: ti-soc-thermal: fix incorrect entry in omap5430_adc_to_temp[]
  thermal: rcar_thermal: add r8a77995 support
  dt-bindings: thermal: rcar-thermal: add R8A77995 support
  thermal: mediatek: use of_device_get_match_data()
  thermal: exynos: remove trip reporting to user-space
  thermal: exynos: remove unused defines for Exynos5433
  thermal: exynos: cleanup code for enabling threshold interrupts
  thermal: exynos: check return values of ->get_trip_[temp, hyst] methods
  thermal: exynos: move trips setting to exynos_tmu_initialize()
  thermal: exynos: set trips in ascending order in exynos7_tmu_initialize()
  thermal: exynos: do not use trips structure directly in ->tmu_initialize
  thermal: exynos: add exynos*_tmu_set_[trip,hyst]() helpers
  thermal: exynos: move IRQs clearing to exynos_tmu_initialize()
  thermal: exynos: clear IRQs later in exynos4412_tmu_initialize()
  thermal: exynos: make ->tmu_initialize method void
  ...

Documentation/devicetree/bindings/thermal/exynos-thermal.txt

@@ -12,7 +12,6 @@
 	       "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
 			Exynos5420 (Must pass triminfo base and triminfo clock)
                "samsung,exynos5433-tmu"
-	       "samsung,exynos5440-tmu"
 	       "samsung,exynos7-tmu"
 - interrupt-parent : The phandle for the interrupt controller
 - reg : Address range of the thermal registers. For soc's which has multiple
@@ -68,18 +67,7 @@ Example 1):
 		#thermal-sensor-cells = <0>;
 	};
 
-Example 2):
-
-	tmuctrl_0: tmuctrl@160118 {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x160118 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
-		clocks = <&clock 21>;
-		clock-names = "tmu_apbif";
-		#thermal-sensor-cells = <0>;
-	};
-
-Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
+Example 2): (In case of Exynos5420 "with misplaced TRIMINFO register")
 	tmu_cpu2: tmu@10068000 {
 		compatible = "samsung,exynos5420-tmu-ext-triminfo";
 		reg = <0x10068000 0x100>, <0x1006c000 0x4>;

Documentation/devicetree/bindings/thermal/imx-thermal.txt

 * Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
 
 Required properties:
-- compatible : "fsl,imx6q-tempmon" for i.MX6Q, "fsl,imx6sx-tempmon" for i.MX6SX.
-  i.MX6SX has two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC,
+- compatible : must be one of following:
+  - "fsl,imx6q-tempmon" for i.MX6Q,
+  - "fsl,imx6sx-tempmon" for i.MX6SX,
+  - "fsl,imx7d-tempmon" for i.MX7S/D.
+- interrupts : the interrupt output of the controller:
+  i.MX6Q has one IRQ which will be triggered when temperature is higher than high threshold,
+  i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC,
   when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature
   is higher than panic threshold, system will auto reboot by SRC module.
 - fsl,tempmon : phandle pointer to system controller that contains TEMPMON

Documentation/devicetree/bindings/thermal/mediatek-thermal.txt

@@ -12,6 +12,7 @@ Required properties:
   - "mediatek,mt8173-thermal" : For MT8173 family of SoCs
   - "mediatek,mt2701-thermal" : For MT2701 family of SoCs
   - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
+  - "mediatek,mt7622-thermal" : For MT7622 SoC
 - reg: Address range of the thermal controller
 - interrupts: IRQ for the thermal controller
 - clocks, clock-names: Clocks needed for the thermal controller. required

Documentation/devicetree/bindings/thermal/qcom-tsens.txt

@@ -8,6 +8,7 @@ Required properties:
 
 - reg: Address range of the thermal registers
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
+- #qcom,sensors: Number of sensors in tsens block
 - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
 nvmem cells
 

Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt

@@ -9,6 +9,7 @@ Required properties:
 			  Examples with soctypes are:
 			    - "renesas,r8a7795-thermal" (R-Car H3)
 			    - "renesas,r8a7796-thermal" (R-Car M3-W)
+			    - "renesas,r8a77965-thermal" (R-Car M3-N)
 - reg			: Address ranges of the thermal registers. Each sensor
 			  needs one address range. Sorting must be done in
 			  increasing order according to datasheet, i.e.
@@ -18,7 +19,7 @@ Required properties:
 
 Optional properties:
 
-- interrupts           : interrupts routed to the TSC (3 for H3 and M3-W)
+- interrupts           : interrupts routed to the TSC (3 for H3, M3-W and M3-N)
 - power-domain		: Must contain a reference to the power domain. This
 			  property is mandatory if the thermal sensor instance
 			  is part of a controllable power domain.

Documentation/devicetree/bindings/thermal/rcar-thermal.txt

@@ -3,7 +3,8 @@
 Required properties:
 - compatible		: "renesas,thermal-<soctype>",
 			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
-			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
+			   "renesas,rcar-thermal" (without thermal-zone) as
+                           fallback except R-Car D3.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7743" (RZ/G1M)
@@ -12,13 +13,15 @@ Required properties:
 			    - "renesas,thermal-r8a7791" (R-Car M2-W)
 			    - "renesas,thermal-r8a7792" (R-Car V2H)
 			    - "renesas,thermal-r8a7793" (R-Car M2-N)
+			    - "renesas,thermal-r8a77995" (R-Car D3)
 - reg			: Address range of the thermal registers.
 			  The 1st reg will be recognized as common register
 			  if it has "interrupts".
 
 Option properties:
 
-- interrupts		: use interrupt
+- interrupts		: If present should contain 3 interrupts for
+                          R-Car D3 or 1 interrupt otherwise.
 
 Example (non interrupt support):
 

Documentation/devicetree/bindings/thermal/uniphier-thermal.txt

@@ -8,6 +8,7 @@ Required properties:
 - compatible :
   - "socionext,uniphier-pxs2-thermal" : For UniPhier PXs2 SoC
   - "socionext,uniphier-ld20-thermal" : For UniPhier LD20 SoC
+  - "socionext,uniphier-pxs3-thermal" : For UniPhier PXs3 SoC
 - interrupts : IRQ for the temperature alarm
 - #thermal-sensor-cells : Should be 0. See ./thermal.txt for details.
 

drivers/thermal/mtk_thermal.c

@@ -153,6 +153,12 @@
 /* The number of sensing points per bank */
 #define MT2712_NUM_SENSORS_PER_ZONE	4
 
+#define MT7622_TEMP_AUXADC_CHANNEL	11
+#define MT7622_NUM_SENSORS		1
+#define MT7622_NUM_ZONES		1
+#define MT7622_NUM_SENSORS_PER_ZONE	1
+#define MT7622_TS1	0
+
 struct mtk_thermal;
 
 struct thermal_bank_cfg {
@@ -242,6 +248,12 @@ static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = {
 
 static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 };
 
+/* MT7622 thermal sensor data */
+static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, };
+static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
+static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
+static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
+
 /**
  * The MT8173 thermal controller has four banks. Each bank can read up to
  * four temperature sensors simultaneously. The MT8173 has a total of 5
@@ -329,6 +341,25 @@ static const struct mtk_thermal_data mt2712_thermal_data = {
 	.sensor_mux_values = mt2712_mux_values,
 };
 
+/*
+ * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data
+ * access.
+ */
+static const struct mtk_thermal_data mt7622_thermal_data = {
+	.auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL,
+	.num_banks = MT7622_NUM_ZONES,
+	.num_sensors = MT7622_NUM_SENSORS,
+	.bank_data = {
+		{
+			.num_sensors = 1,
+			.sensors = mt7622_bank_data,
+		},
+	},
+	.msr = mt7622_msr,
+	.adcpnp = mt7622_adcpnp,
+	.sensor_mux_values = mt7622_mux_values,
+};
+
 /**
  * raw_to_mcelsius - convert a raw ADC value to mcelsius
  * @mt:		The thermal controller
@@ -631,6 +662,10 @@ static const struct of_device_id mtk_thermal_of_match[] = {
 	{
 		.compatible = "mediatek,mt2712-thermal",
 		.data = (void *)&mt2712_thermal_data,
+	},
+	{
+		.compatible = "mediatek,mt7622-thermal",
+		.data = (void *)&mt7622_thermal_data,
 	}, {
 	},
 };
@@ -642,7 +677,6 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 	struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
 	struct mtk_thermal *mt;
 	struct resource *res;
-	const struct of_device_id *of_id;
 	u64 auxadc_phys_base, apmixed_phys_base;
 	struct thermal_zone_device *tzdev;
 
@@ -650,9 +684,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 	if (!mt)
 		return -ENOMEM;
 
-	of_id = of_match_device(mtk_thermal_of_match, &pdev->dev);
-	if (of_id)
-		mt->conf = (const struct mtk_thermal_data *)of_id->data;
+	mt->conf = of_device_get_match_data(&pdev->dev);
 
 	mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
 	if (IS_ERR(mt->clk_peri_therm))

drivers/thermal/qcom-spmi-temp-alarm.c

 /*
- * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2011-2015, 2017, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -11,6 +11,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/iio/consumer.h>
@@ -29,13 +30,17 @@
 #define QPNP_TM_REG_ALARM_CTRL		0x46
 
 #define QPNP_TM_TYPE			0x09
-#define QPNP_TM_SUBTYPE			0x08
+#define QPNP_TM_SUBTYPE_GEN1		0x08
+#define QPNP_TM_SUBTYPE_GEN2		0x09
 
-#define STATUS_STAGE_MASK		0x03
+#define STATUS_GEN1_STAGE_MASK		GENMASK(1, 0)
+#define STATUS_GEN2_STATE_MASK		GENMASK(6, 4)
+#define STATUS_GEN2_STATE_SHIFT		4
 
-#define SHUTDOWN_CTRL1_THRESHOLD_MASK	0x03
+#define SHUTDOWN_CTRL1_OVERRIDE_MASK	GENMASK(7, 6)
+#define SHUTDOWN_CTRL1_THRESHOLD_MASK	GENMASK(1, 0)
 
-#define ALARM_CTRL_FORCE_ENABLE		0x80
+#define ALARM_CTRL_FORCE_ENABLE		BIT(7)
 
 /*
  * Trip point values based on threshold control
@@ -58,6 +63,7 @@
 struct qpnp_tm_chip {
 	struct regmap			*map;
 	struct thermal_zone_device	*tz_dev;
+	unsigned int			subtype;
 	long				temp;
 	unsigned int			thresh;
 	unsigned int			stage;
@@ -66,6 +72,9 @@ struct qpnp_tm_chip {
 	struct iio_channel		*adc;
 };
 
+/* This array maps from GEN2 alarm state to GEN1 alarm stage */
+static const unsigned int alarm_state_map[8] = {0, 1, 1, 2, 2, 3, 3, 3};
+
 static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8 *data)
 {
 	unsigned int val;
@@ -84,30 +93,59 @@ static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data)
 	return regmap_write(chip->map, chip->base + addr, data);
 }
 
+/**
+ * qpnp_tm_get_temp_stage() - return over-temperature stage
+ * @chip:		Pointer to the qpnp_tm chip
+ *
+ * Return: stage (GEN1) or state (GEN2) on success, or errno on failure.
+ */
+static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip)
+{
+	int ret;
+	u8 reg = 0;
+
+	ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
+	if (ret < 0)
+		return ret;
+
+	if (chip->subtype == QPNP_TM_SUBTYPE_GEN1)
+		ret = reg & STATUS_GEN1_STAGE_MASK;
+	else
+		ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT;
+
+	return ret;
+}
+
 /*
  * This function updates the internal temp value based on the
  * current thermal stage and threshold as well as the previous stage
  */
 static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
 {
-	unsigned int stage;
+	unsigned int stage, stage_new, stage_old;
 	int ret;
-	u8 reg = 0;
 
-	ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
+	ret = qpnp_tm_get_temp_stage(chip);
 	if (ret < 0)
 		return ret;
+	stage = ret;
 
-	stage = reg & STATUS_STAGE_MASK;
+	if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) {
+		stage_new = stage;
+		stage_old = chip->stage;
+	} else {
+		stage_new = alarm_state_map[stage];
+		stage_old = alarm_state_map[chip->stage];
+	}
 
-	if (stage > chip->stage) {
+	if (stage_new > stage_old) {
 		/* increasing stage, use lower bound */
-		chip->temp = (stage - 1) * TEMP_STAGE_STEP +
+		chip->temp = (stage_new - 1) * TEMP_STAGE_STEP +
 			     chip->thresh * TEMP_THRESH_STEP +
 			     TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN;
-	} else if (stage < chip->stage) {
+	} else if (stage_new < stage_old) {
 		/* decreasing stage, use upper bound */
-		chip->temp = stage * TEMP_STAGE_STEP +
+		chip->temp = stage_new * TEMP_STAGE_STEP +
 			     chip->thresh * TEMP_THRESH_STEP -
 			     TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN;
 	}
@@ -162,28 +200,37 @@ static irqreturn_t qpnp_tm_isr(int irq, void *data)
  */
 static int qpnp_tm_init(struct qpnp_tm_chip *chip)
 {
+	unsigned int stage;
 	int ret;
-	u8 reg;
+	u8 reg = 0;
 
-	chip->thresh = THRESH_MIN;
+	ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, &reg);
+	if (ret < 0)
+		return ret;
+
+	chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK;
 	chip->temp = DEFAULT_TEMP;
 
-	ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
+	ret = qpnp_tm_get_temp_stage(chip);
 	if (ret < 0)
 		return ret;
+	chip->stage = ret;
 
-	chip->stage = reg & STATUS_STAGE_MASK;
+	stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1
+		? chip->stage : alarm_state_map[chip->stage];
 
-	if (chip->stage)
+	if (stage)
 		chip->temp = chip->thresh * TEMP_THRESH_STEP +
-			     (chip->stage - 1) * TEMP_STAGE_STEP +
+			     (stage - 1) * TEMP_STAGE_STEP +
 			     TEMP_THRESH_MIN;
 
 	/*
 	 * Set threshold and disable software override of stage 2 and 3
 	 * shutdowns.
 	 */
-	reg = chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK;
+	chip->thresh = THRESH_MIN;
+	reg &= ~(SHUTDOWN_CTRL1_OVERRIDE_MASK | SHUTDOWN_CTRL1_THRESHOLD_MASK);
+	reg |= chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK;
 	ret = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
 	if (ret < 0)
 		return ret;
@@ -246,12 +293,15 @@ static int qpnp_tm_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	if (type != QPNP_TM_TYPE || subtype != QPNP_TM_SUBTYPE) {
+	if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
+				     && subtype != QPNP_TM_SUBTYPE_GEN2)) {
 		dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n",
 			type, subtype);
 		return -ENODEV;
 	}
 
+	chip->subtype = subtype;
+
 	ret = qpnp_tm_init(chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "init failed\n");

drivers/thermal/qcom/tsens.c

@@ -115,6 +115,7 @@ static int tsens_probe(struct platform_device *pdev)
 	struct tsens_device *tmdev;
 	const struct tsens_data *data;
 	const struct of_device_id *id;
+	u32 num_sensors;
 
 	if (pdev->dev.of_node)
 		dev = &pdev->dev;
@@ -129,19 +130,24 @@ static int tsens_probe(struct platform_device *pdev)
 	else
 		data = &data_8960;
 
-	if (data->num_sensors <= 0) {
+	num_sensors = data->num_sensors;
+
+	if (np)
+		of_property_read_u32(np, "#qcom,sensors", &num_sensors);
+
+	if (num_sensors <= 0) {
 		dev_err(dev, "invalid number of sensors\n");
 		return -EINVAL;
 	}
 
 	tmdev = devm_kzalloc(dev,
-			     struct_size(tmdev, sensor, data->num_sensors),
+			     struct_size(tmdev, sensor, num_sensors),
 			     GFP_KERNEL);
 	if (!tmdev)
 		return -ENOMEM;
 
 	tmdev->dev = dev;
-	tmdev->num_sensors = data->num_sensors;
+	tmdev->num_sensors = num_sensors;
 	tmdev->ops = data->ops;
 	for (i = 0;  i < tmdev->num_sensors; i++) {
 		if (data->hw_ids)

drivers/thermal/rcar_gen3_thermal.c

@@ -132,7 +132,7 @@ static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc,
 #define RCAR3_THERMAL_GRAN 500 /* mili Celsius */
 
 /* no idea where these constants come from */
-#define TJ_1 96
+#define TJ_1 116
 #define TJ_3 -41
 
 static void rcar_gen3_thermal_calc_coefs(struct equation_coefs *coef,
@@ -146,7 +146,7 @@ static void rcar_gen3_thermal_calc_coefs(struct equation_coefs *coef,
 	 * Division is not scaled in BSP and if scaled it might overflow
 	 * the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled
 	 */
-	tj_2 = (FIXPT_INT((ptat[1] - ptat[2]) * 137)
+	tj_2 = (FIXPT_INT((ptat[1] - ptat[2]) * 157)
 		/ (ptat[0] - ptat[2])) - FIXPT_INT(41);
 
 	coef->a1 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[2]),
@@ -207,8 +207,8 @@ static int rcar_gen3_thermal_set_trips(void *devdata, int low, int high)
 {
 	struct rcar_gen3_thermal_tsc *tsc = devdata;
 
-	low = clamp_val(low, -40000, 125000);
-	high = clamp_val(high, -40000, 125000);
+	low = clamp_val(low, -40000, 120000);
+	high = clamp_val(high, -40000, 120000);
 
 	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1,
 				rcar_gen3_thermal_mcelsius_to_temp(tsc, low));
@@ -329,6 +329,7 @@ static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
 static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
 	{ .compatible = "renesas,r8a7795-thermal", },
 	{ .compatible = "renesas,r8a7796-thermal", },
+	{ .compatible = "renesas,r8a77965-thermal", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
@@ -354,11 +355,11 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 
 	/* default values if FUSEs are missing */
 	/* TODO: Read values from hardware on supported platforms */
-	int ptat[3] = { 2351, 1509, 435 };
+	int ptat[3] = { 2631, 1509, 435 };
 	int thcode[TSC_MAX_NUM][3] = {
-		{ 3248, 2800, 2221 },
-		{ 3245, 2795, 2216 },
-		{ 3250, 2805, 2237 },
+		{ 3397, 2800, 2221 },
+		{ 3393, 2795, 2216 },
+		{ 3389, 2805, 2237 },
 	};
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);

drivers/thermal/rcar_thermal.c

@@ -58,10 +58,47 @@ struct rcar_thermal_common {
 	spinlock_t lock;
 };
 
+struct rcar_thermal_chip {
+	unsigned int use_of_thermal : 1;
+	unsigned int has_filonoff : 1;
+	unsigned int irq_per_ch : 1;
+	unsigned int needs_suspend_resume : 1;
+	unsigned int nirqs;
+};
+
+static const struct rcar_thermal_chip rcar_thermal = {
+	.use_of_thermal = 0,
+	.has_filonoff = 1,
+	.irq_per_ch = 0,
+	.needs_suspend_resume = 0,
+	.nirqs = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen2_thermal = {
+	.use_of_thermal = 1,
+	.has_filonoff = 1,
+	.irq_per_ch = 0,
+	.needs_suspend_resume = 0,
+	.nirqs = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen3_thermal = {
+	.use_of_thermal = 1,
+	.has_filonoff = 0,
+	.irq_per_ch = 1,
+	.needs_suspend_resume = 1,
+	/*
+	 * The Gen3 chip has 3 interrupts, but this driver uses only 2
+	 * interrupts to detect a temperature change, rise or fall.
+	 */
+	.nirqs = 2,
+};
+
 struct rcar_thermal_priv {
 	void __iomem *base;
 	struct rcar_thermal_common *common;
 	struct thermal_zone_device *zone;
+	const struct rcar_thermal_chip *chip;
 	struct delayed_work work;
 	struct mutex lock;
 	struct list_head list;
@@ -77,13 +114,20 @@ struct rcar_thermal_priv {
 #define rcar_priv_to_dev(priv)		((priv)->common->dev)
 #define rcar_has_irq_support(priv)	((priv)->common->base)
 #define rcar_id_to_shift(priv)		((priv)->id * 8)
-#define rcar_of_data(dev)		((unsigned long)of_device_get_match_data(dev))
-#define rcar_use_of_thermal(dev)	(rcar_of_data(dev) == USE_OF_THERMAL)
 
-#define USE_OF_THERMAL	1
 static const struct of_device_id rcar_thermal_dt_ids[] = {
-	{ .compatible = "renesas,rcar-thermal", },
-	{ .compatible = "renesas,rcar-gen2-thermal", .data = (void *)USE_OF_THERMAL },
+	{
+		.compatible = "renesas,rcar-thermal",
+		.data = &rcar_thermal,
+	},
+	{
+		.compatible = "renesas,rcar-gen2-thermal",
+		 .data = &rcar_gen2_thermal,
+	},
+	{
+		.compatible = "renesas,thermal-r8a77995",
+		.data = &rcar_gen3_thermal,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
@@ -190,6 +234,7 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
 	 * enable IRQ
 	 */
 	if (rcar_has_irq_support(priv)) {
+		if (priv->chip->has_filonoff)
 			rcar_thermal_write(priv, FILONOFF, 0);
 
 		/* enable Rising/Falling edge interrupt */
@@ -420,7 +465,7 @@ static int rcar_thermal_remove(struct platform_device *pdev)
 
 	rcar_thermal_for_each_priv(priv, common) {
 		rcar_thermal_irq_disable(priv);
-		if (rcar_use_of_thermal(dev))
+		if (priv->chip->use_of_thermal)
 			thermal_remove_hwmon_sysfs(priv->zone);
 		else
 			thermal_zone_device_unregister(priv->zone);
@@ -438,6 +483,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	struct rcar_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
 	struct resource *res, *irq;
+	const struct rcar_thermal_chip *chip = of_device_get_match_data(dev);
 	int mres = 0;
 	int i;
 	int ret = -ENODEV;
@@ -457,14 +503,18 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
+	for (i = 0; i < chip->nirqs; i++) {
 		irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (irq) {
+		if (!irq)
+			continue;
+		if (!common->base) {
 			/*
 			 * platform has IRQ support.
 			 * Then, driver uses common registers
 			 * rcar_has_irq_support() will be enabled
 			 */
-		res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
+			res = platform_get_resource(pdev, IORESOURCE_MEM,
+						    mres++);
 			common->base = devm_ioremap_resource(dev, res);
 			if (IS_ERR(common->base))
 				return PTR_ERR(common->base);
@@ -472,6 +522,18 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 			idle = 0; /* polling delay is not needed */
 		}
 
+		ret = devm_request_irq(dev, irq->start, rcar_thermal_irq,
+				       IRQF_SHARED, dev_name(dev), common);
+		if (ret) {
+			dev_err(dev, "irq request failed\n ");
+			goto error_unregister;
+		}
+
+		/* update ENR bits */
+		if (chip->irq_per_ch)
+			enr_bits |= 1 << i;
+	}
+
 	for (i = 0;; i++) {
 		res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
 		if (!res)
@@ -491,6 +553,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 
 		priv->common = common;
 		priv->id = i;
+		priv->chip = chip;
 		mutex_init(&priv->lock);
 		INIT_LIST_HEAD(&priv->list);
 		INIT_DELAYED_WORK(&priv->work, rcar_thermal_work);
@@ -498,7 +561,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		if (ret < 0)
 			goto error_unregister;
 
-		if (rcar_use_of_thermal(dev))
+		if (chip->use_of_thermal)
 			priv->zone = devm_thermal_zone_of_sensor_register(
 						dev, i, priv,
 						&rcar_thermal_zone_of_ops);
@@ -515,7 +578,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 			goto error_unregister;
 		}
 
-		if (rcar_use_of_thermal(dev)) {
+		if (chip->use_of_thermal) {
 			/*
 			 * thermal_zone doesn't enable hwmon as default,
 			 * but, enable it here to keep compatible
@@ -531,20 +594,12 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		list_move_tail(&priv->list, &common->head);
 
 		/* update ENR bits */
+		if (!chip->irq_per_ch)
 			enr_bits |= 3 << (i * 8);
 	}
 
-	/* enable temperature comparation */
-	if (irq) {
-		ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
-				       dev_name(dev), common);
-		if (ret) {
-			dev_err(dev, "irq request failed\n ");
-			goto error_unregister;
-		}
-
+	if (enr_bits)
 		rcar_thermal_common_write(common, ENR, enr_bits);
-	}
 
 	dev_info(dev, "%d sensor probed\n", i);
 
@@ -556,9 +611,48 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	return ret;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int rcar_thermal_suspend(struct device *dev)
+{
+	struct rcar_thermal_common *common = dev_get_drvdata(dev);
+	struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+							  typeof(*priv), list);
+
+	if (priv->chip->needs_suspend_resume) {
+		rcar_thermal_common_write(common, ENR, 0);
+		rcar_thermal_irq_disable(priv);
+		rcar_thermal_bset(priv, THSCR, CPCTL, 0);
+	}
+
+	return 0;
+}
+
+static int rcar_thermal_resume(struct device *dev)
+{
+	struct rcar_thermal_common *common = dev_get_drvdata(dev);
+	struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+							  typeof(*priv), list);
+	int ret;
+
+	if (priv->chip->needs_suspend_resume) {
+		ret = rcar_thermal_update_temp(priv);
+		if (ret < 0)
+			return ret;
+		rcar_thermal_irq_enable(priv);
+		rcar_thermal_common_write(common, ENR, 0x03);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(rcar_thermal_pm_ops, rcar_thermal_suspend,
+			 rcar_thermal_resume);
+
 static struct platform_driver rcar_thermal_driver = {
 	.driver	= {
 		.name	= "rcar_thermal",
+		.pm = &rcar_thermal_pm_ops,
 		.of_match_table = rcar_thermal_dt_ids,
 	},
 	.probe		= rcar_thermal_probe,

drivers/thermal/samsung/exynos_tmu.h

-/*
- * exynos_tmu.h - Samsung EXYNOS TMU (Thermal Management Unit)
- *
- *  Copyright (C) 2011 Samsung Electronics
- *  Donggeun Kim <dg77.kim@samsung.com>
- *  Amit Daniel Kachhap <amit.daniel@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _EXYNOS_TMU_H
-#define _EXYNOS_TMU_H
-#include <linux/cpu_cooling.h>
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-enum soc_type {
-	SOC_ARCH_EXYNOS3250 = 1,
-	SOC_ARCH_EXYNOS4210,
-	SOC_ARCH_EXYNOS4412,
-	SOC_ARCH_EXYNOS5250,
-	SOC_ARCH_EXYNOS5260,
-	SOC_ARCH_EXYNOS5420,
-	SOC_ARCH_EXYNOS5420_TRIMINFO,
-	SOC_ARCH_EXYNOS5433,
-	SOC_ARCH_EXYNOS5440,
-	SOC_ARCH_EXYNOS7,
-};
-
-/**
- * struct exynos_tmu_platform_data
- * @gain: gain of amplifier in the positive-TC generator block
- *	0 < gain <= 15
- * @reference_voltage: reference voltage of amplifier
- *	in the positive-TC generator block
- *	0 < reference_voltage <= 31
- * @noise_cancel_mode: noise cancellation mode
- *	000, 100, 101, 110 and 111 can be different modes
- * @type: determines the type of SOC
- * @efuse_value: platform defined fuse value
- * @min_efuse_value: minimum valid trimming data
- * @max_efuse_value: maximum valid trimming data
- * @default_temp_offset: default temperature offset in case of no trimming
- * @cal_type: calibration type for temperature
- *
- * This structure is required for configuration of exynos_tmu driver.
- */
-struct exynos_tmu_platform_data {
-	u8 gain;
-	u8 reference_voltage;
-	u8 noise_cancel_mode;
-
-	u32 efuse_value;
-	u32 min_efuse_value;
-	u32 max_efuse_value;
-	u8 first_point_trim;
-	u8 second_point_trim;
-	u8 default_temp_offset;
-
-	enum soc_type type;
-	u32 cal_type;
-};
-
-#endif /* _EXYNOS_TMU_H */

drivers/thermal/tegra/soctherm.c

@@ -240,31 +240,6 @@ struct tegra_soctherm {
 	struct dentry *debugfs_dir;
 };
 
-/**
- * clk_writel() - writes a value to a CAR register
- * @ts: pointer to a struct tegra_soctherm
- * @v: the value to write
- * @reg: the register offset
- *
- * Writes @v to @reg.  No return value.
- */
-static inline void clk_writel(struct tegra_soctherm *ts, u32 value, u32 reg)
-{
-	writel(value, (ts->clk_regs + reg));
-}
-
-/**
- * clk_readl() - reads specified register from CAR IP block
- * @ts: pointer to a struct tegra_soctherm
- * @reg: register address to be read
- *
- * Return: the value of the register
- */
-static inline u32 clk_readl(struct tegra_soctherm *ts, u32 reg)
-{
-	return readl(ts->clk_regs + reg);
-}
-
 /**
  * ccroc_writel() - writes a value to a CCROC register
  * @ts: pointer to a struct tegra_soctherm
@@ -926,7 +901,7 @@ static int throt_set_cdev_state(struct thermal_cooling_device *cdev,
 	return 0;
 }
 
-static struct thermal_cooling_device_ops throt_cooling_ops = {
+static const struct thermal_cooling_device_ops throt_cooling_ops = {
 	.get_max_state = throt_get_cdev_max_state,
 	.get_cur_state = throt_get_cdev_cur_state,
 	.set_cur_state = throt_set_cdev_state,
@@ -1207,9 +1182,9 @@ static void tegra_soctherm_throttle(struct device *dev)
 	} else {
 		writel(v, ts->regs + THROT_GLOBAL_CFG);
 
-		v = clk_readl(ts, CAR_SUPER_CCLKG_DIVIDER);
+		v = readl(ts->clk_regs + CAR_SUPER_CCLKG_DIVIDER);
 		v = REG_SET_MASK(v, CDIVG_USE_THERM_CONTROLS_MASK, 1);
-		clk_writel(ts, v, CAR_SUPER_CCLKG_DIVIDER);
+		writel(v, ts->clk_regs + CAR_SUPER_CCLKG_DIVIDER);
 	}
 
 	/* initialize stats collection */

drivers/thermal/ti-soc-thermal/omap5-thermal-data.c

@@ -310,7 +310,7 @@ omap5430_adc_to_temp[
 	119800, 120200, 120600, 121000, 121400, 121800, 122400, 122600, 123000,
 	123400,
 	/* Index 940 - 945 */
-	123800, 1242000, 124600, 124900, 125000, 125000,
+	123800, 124200, 124600, 124900, 125000, 125000,
 };
 
 /* OMAP54xx ES2.0 data */

drivers/thermal/uniphier_thermal.c

@@ -365,6 +365,10 @@ static const struct of_device_id uniphier_tm_dt_ids[] = {
 		.compatible = "socionext,uniphier-ld20-thermal",
 		.data       = &uniphier_ld20_tm_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pxs3-thermal",
+		.data       = &uniphier_ld20_tm_data,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, uniphier_tm_dt_ids);