Commit 19c273c5 authored by Sam Ravnborg's avatar Sam Ravnborg

Merge bk://linux-sam.bkbits.net/main

into mars.ravnborg.org:/home/sam/src/linux/kernel/bk/v2.5
parents 928880f8 20a88ed0
......@@ -39,8 +39,8 @@ htmldocs: $(HTML)
###
#External programs used
KERNELDOC=$(objtree)/scripts/kernel-doc
DOCPROC=$(objtree)/scripts/docproc
KERNELDOC = scripts/kernel-doc
DOCPROC = scripts/docproc
###
# DOCPROC is used for two purposes:
......@@ -50,14 +50,14 @@ DOCPROC=$(objtree)/scripts/docproc
# The following rules are used to generate the .sgml documentation
# required to generate the final targets. (ps, pdf, html).
quiet_cmd_docproc = DOCPROC $@
cmd_docproc = $(DOCPROC) doc $< >$@
cmd_docproc = $(DOCPROC) doc $< >$@
define rule_docproc
set -e
$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))';)
$(cmd_$(1)); \
( \
echo 'cmd_$@ := $(cmd_$(1))'; \
echo $@: `$(DOCPROC) depend $<`; \
set -e; \
$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))';) \
$(cmd_$(1)); \
( \
echo 'cmd_$@ := $(cmd_$(1))'; \
echo $@: `$(DOCPROC) depend $<`; \
) > $(dir $@).$(notdir $@).cmd
endef
......@@ -96,41 +96,55 @@ $(obj)/parportbook.ps $(obj)/parportbook.pdf: $(EPS-parportbook) $(PNG-parportbo
###
# Rules to generate postscript, PDF and HTML
# db2html creates a directory. Generate a html file used for timestamp
quiet_cmd_db2ps = DB2PS $@
cmd_db2ps = db2ps -o $(dir $@) $<
%.ps : %.sgml
@(which db2ps > /dev/null 2>&1) || \
(echo "*** You need to install DocBook stylesheets ***"; \
exit 1)
$(call do_cmd,DB2PS $@,db2ps -o $(dir $@) $<)
$(call cmd,db2ps)
quiet_cmd_db2pdf = DB2PDF $@
cmd_db2pdf = db2pdf -o $(dir $@) $<
%.pdf : %.sgml
@(which db2pdf > /dev/null 2>&1) || \
(echo "*** You need to install DocBook stylesheets ***"; \
exit 1)
$(call do_cmd,DB2PDF $@,db2pdf -o $(dir $@) $<)
$(call cmd,db2pdf)
quiet_cmd_db2html = DB2HTML $@
cmd_db2html = db2html -o $(patsubst %.html,%,$@) $< && \
echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/book1.html"> \
Goto $(patsubst %.html,%,$(notdir $@))</a><p>' > $@
%.html: %.sgml
@(which db2html > /dev/null 2>&1) || \
(echo "*** You need to install DocBook stylesheets ***"; \
exit 1)
@rm -rf $@ $(patsubst %.html,%,$@)
$(call do_cmd,DB2HTML $@,db2html -o $(patsubst %.html,%,$@) $< && \
echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/book1.html">\
Goto $(patsubst %.html,%,$(notdir $@))</a><p>' > $@)
$(call cmd,db2html)
@if [ ! -z "$(PNG-$(basename $(notdir $@)))" ]; then \
cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
###
# Rules to generate postscripts and PNG imgages from .fig format files
quiet_cmd_fig2eps = FIG2EPS $@
cmd_fig2eps = fig2dev -Leps $< $@
%.eps: %.fig
$(call do_cmd,FIG2DEV -Leps $@,fig2dev -Leps $< $@)
$(call cmd,fig2eps)
quiet_cmd_fig2png = FIG2PNG $@
cmd_fig2png = fig2dev -Lpng $< $@
%.png: %.fig
$(call do_cmd,FIG2DEV -Lpng $@,fig2dev -Lpng $< $@)
$(call cmd,fig2png)
###
# Rule to convert a .c file to inline SGML documentation
%.sgml: %.c
@echo ' Generating $@'
@echo ' GEN $@'
@( \
echo "<programlisting>"; \
expand --tabs=8 < $< | \
......
......@@ -79,6 +79,7 @@ KAO -->
</sect1>
<sect1><title>String Manipulation</title>
!Ilib/string.c
!Elib/string.c
</sect1>
<sect1><title>Bit Operations</title>
!Iinclude/asm-i386/bitops.h
......@@ -176,7 +177,7 @@ X!Ekernel/module.c
!Edrivers/pci/pci.c
</sect1>
<sect1><title>PCI Hotplug Support Library</title>
!Edrivers/hotplug/pci_hotplug_core.c
!Edrivers/pci/hotplug/pci_hotplug_core.c
</sect1>
<sect1><title>MCA Architecture</title>
<sect2><title>MCA Device Functions</title>
......
......@@ -211,7 +211,7 @@ static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr);
static void sis900_set_mode (long ioaddr, int speed, int duplex);
/**
* sis900_get_mac_addr: - Get MAC address for stand alone SiS900 model
* sis900_get_mac_addr - Get MAC address for stand alone SiS900 model
* @pci_dev: the sis900 pci device
* @net_dev: the net device to get address for
*
......@@ -241,7 +241,7 @@ static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_de
}
/**
* sis630e_get_mac_addr: - Get MAC address for SiS630E model
* sis630e_get_mac_addr - Get MAC address for SiS630E model
* @pci_dev: the sis900 pci device
* @net_dev: the net device to get address for
*
......@@ -274,7 +274,7 @@ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev, struct net_d
/**
* sis635_get_mac_addr: - Get MAC address for SIS635 model
* sis635_get_mac_addr - Get MAC address for SIS635 model
* @pci_dev: the sis900 pci device
* @net_dev: the net device to get address for
*
......@@ -310,7 +310,7 @@ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev, struct net_de
}
/**
* sis96x_get_mac_addr: - Get MAC address for SiS962 or SiS963 model
* sis96x_get_mac_addr - Get MAC address for SiS962 or SiS963 model
* @pci_dev: the sis900 pci device
* @net_dev: the net device to get address for
*
......@@ -352,7 +352,7 @@ static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev, struct net_de
}
/**
* sis900_probe: - Probe for sis900 device
* sis900_probe - Probe for sis900 device
* @pci_dev: the sis900 pci device
* @pci_id: the pci device ID
*
......@@ -498,7 +498,7 @@ static int __devinit sis900_probe (struct pci_dev *pci_dev, const struct pci_dev
}
/**
* sis900_mii_probe: - Probe MII PHY for sis900
* sis900_mii_probe - Probe MII PHY for sis900
* @net_dev: the net device to probe for
*
* Search for total of 32 possible mii phy addresses.
......@@ -618,7 +618,7 @@ static int __init sis900_mii_probe (struct net_device * net_dev)
}
/**
* sis900_default_phy: - Select default PHY for sis900 mac.
* sis900_default_phy - Select default PHY for sis900 mac.
* @net_dev: the net device to probe for
*
* Select first detected PHY with link as default.
......@@ -671,7 +671,7 @@ static u16 sis900_default_phy(struct net_device * net_dev)
/**
* sis900_set_capability: - set the media capability of network adapter.
* sis900_set_capability - set the media capability of network adapter.
* @net_dev : the net device to probe for
* @phy : default PHY
*
......@@ -701,7 +701,7 @@ static void sis900_set_capability( struct net_device *net_dev , struct mii_phy *
#define eeprom_delay() inl(ee_addr)
/**
* read_eeprom: - Read Serial EEPROM
* read_eeprom - Read Serial EEPROM
* @ioaddr: base i/o address
* @location: the EEPROM location to read
*
......@@ -776,7 +776,7 @@ static void mdio_reset(long mdio_addr)
}
/**
* mdio_read: - read MII PHY register
* mdio_read - read MII PHY register
* @net_dev: the net device to read
* @phy_id: the phy address to read
* @location: the phy regiester id to read
......@@ -818,7 +818,7 @@ static u16 mdio_read(struct net_device *net_dev, int phy_id, int location)
}
/**
* mdio_write: - write MII PHY register
* mdio_write - write MII PHY register
* @net_dev: the net device to write
* @phy_id: the phy address to write
* @location: the phy regiester id to write
......@@ -872,7 +872,7 @@ static void mdio_write(struct net_device *net_dev, int phy_id, int location, int
/**
* sis900_reset_phy: - reset sis900 mii phy.
* sis900_reset_phy - reset sis900 mii phy.
* @net_dev: the net device to write
* @phy_addr: default phy address
*
......@@ -895,7 +895,7 @@ static u16 sis900_reset_phy(struct net_device *net_dev, int phy_addr)
}
/**
* sis900_open: - open sis900 device
* sis900_open - open sis900 device
* @net_dev: the net device to open
*
* Do some initialization and start net interface.
......@@ -952,7 +952,7 @@ sis900_open(struct net_device *net_dev)
}
/**
* sis900_init_rxfilter: - Initialize the Rx filter
* sis900_init_rxfilter - Initialize the Rx filter
* @net_dev: the net device to initialize for
*
* Set receive filter address to our MAC address
......@@ -990,7 +990,7 @@ sis900_init_rxfilter (struct net_device * net_dev)
}
/**
* sis900_init_tx_ring: - Initialize the Tx descriptor ring
* sis900_init_tx_ring - Initialize the Tx descriptor ring
* @net_dev: the net device to initialize for
*
* Initialize the Tx descriptor ring,
......@@ -1023,7 +1023,7 @@ sis900_init_tx_ring(struct net_device *net_dev)
}
/**
* sis900_init_rx_ring: - Initialize the Rx descriptor ring
* sis900_init_rx_ring - Initialize the Rx descriptor ring
* @net_dev: the net device to initialize for
*
* Initialize the Rx descriptor ring,
......@@ -1077,7 +1077,7 @@ sis900_init_rx_ring(struct net_device *net_dev)
}
/**
* sis630_set_eq: - set phy equalizer value for 630 LAN
* sis630_set_eq - set phy equalizer value for 630 LAN
* @net_dev: the net device to set equalizer value
* @revision: 630 LAN revision number
*
......@@ -1165,7 +1165,7 @@ static void sis630_set_eq(struct net_device *net_dev, u8 revision)
}
/**
* sis900_timer: - sis900 timer routine
* sis900_timer - sis900 timer routine
* @data: pointer to sis900 net device
*
* On each timer ticks we check two things,
......@@ -1235,7 +1235,7 @@ static void sis900_timer(unsigned long data)
}
/**
* sis900_check_mode: - check the media mode for sis900
* sis900_check_mode - check the media mode for sis900
* @net_dev: the net device to be checked
* @mii_phy: the mii phy
*
......@@ -1266,7 +1266,7 @@ static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_p
}
/**
* sis900_set_mode: - Set the media mode of mac register.
* sis900_set_mode - Set the media mode of mac register.
* @ioaddr: the address of the device
* @speed : the transmit speed to be determined
* @duplex: the duplex mode to be determined
......@@ -1310,7 +1310,7 @@ static void sis900_set_mode (long ioaddr, int speed, int duplex)
}
/**
* sis900_auto_negotiate: Set the Auto-Negotiation Enable/Reset bit.
* sis900_auto_negotiate - Set the Auto-Negotiation Enable/Reset bit.
* @net_dev: the net device to read mode for
* @phy_addr: mii phy address
*
......@@ -1344,7 +1344,7 @@ static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr)
/**
* sis900_read_mode: - read media mode for sis900 internal phy
* sis900_read_mode - read media mode for sis900 internal phy
* @net_dev: the net device to read mode for
* @speed : the transmit speed to be determined
* @duplex : the duplex mode to be determined
......@@ -1401,7 +1401,7 @@ static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex
}
/**
* sis900_tx_timeout: - sis900 transmit timeout routine
* sis900_tx_timeout - sis900 transmit timeout routine
* @net_dev: the net device to transmit
*
* print transmit timeout status
......@@ -1456,7 +1456,7 @@ static void sis900_tx_timeout(struct net_device *net_dev)
}
/**
* sis900_start_xmit: - sis900 start transmit routine
* sis900_start_xmit - sis900 start transmit routine
* @skb: socket buffer pointer to put the data being transmitted
* @net_dev: the net device to transmit with
*
......@@ -1526,7 +1526,7 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
}
/**
* sis900_interrupt: - sis900 interrupt handler
* sis900_interrupt - sis900 interrupt handler
* @irq: the irq number
* @dev_instance: the client data object
* @regs: snapshot of processor context
......@@ -1587,7 +1587,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance, struct pt_regs
}
/**
* sis900_rx: - sis900 receive routine
* sis900_rx - sis900 receive routine
* @net_dev: the net device which receives data
*
* Process receive interrupt events,
......@@ -1726,7 +1726,7 @@ static int sis900_rx(struct net_device *net_dev)
}
/**
* sis900_finish_xmit: - finish up transmission of packets
* sis900_finish_xmit - finish up transmission of packets
* @net_dev: the net device to be transmitted on
*
* Check for error condition and free socket buffer etc
......@@ -1796,7 +1796,7 @@ static void sis900_finish_xmit (struct net_device *net_dev)
}
/**
* sis900_close: - close sis900 device
* sis900_close - close sis900 device
* @net_dev: the net device to be closed
*
* Disable interrupts, stop the Tx and Rx Status Machine
......@@ -1852,7 +1852,7 @@ sis900_close(struct net_device *net_dev)
}
/**
* netdev_ethtool_ioctl: - For the basic support of ethtool
* netdev_ethtool_ioctl - For the basic support of ethtool
* @net_dev: the net device to command for
* @useraddr: start address of interface request
*
......@@ -1886,7 +1886,7 @@ static int netdev_ethtool_ioctl (struct net_device *net_dev, void *useraddr)
}
/**
* mii_ioctl: - process MII i/o control command
* mii_ioctl - process MII i/o control command
* @net_dev: the net device to command for
* @rq: parameter for command
* @cmd: the i/o command
......@@ -1922,7 +1922,7 @@ static int mii_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd)
}
/**
* sis900_get_stats: - Get sis900 read/write statistics
* sis900_get_stats - Get sis900 read/write statistics
* @net_dev: the net device to get statistics for
*
* get tx/rx statistics for sis900
......@@ -1937,7 +1937,7 @@ sis900_get_stats(struct net_device *net_dev)
}
/**
* sis900_set_config: - Set media type by net_device.set_config
* sis900_set_config - Set media type by net_device.set_config
* @dev: the net device for media type change
* @map: ifmap passed by ifconfig
*
......@@ -2034,7 +2034,7 @@ static int sis900_set_config(struct net_device *dev, struct ifmap *map)
}
/**
* sis900_mcast_bitnr: - compute hashtable index
* sis900_mcast_bitnr - compute hashtable index
* @addr: multicast address
* @revision: revision id of chip
*
......@@ -2057,7 +2057,7 @@ static inline u16 sis900_mcast_bitnr(u8 *addr, u8 revision)
}
/**
* set_rx_mode: - Set SiS900 receive mode
* set_rx_mode - Set SiS900 receive mode
* @net_dev: the net device to be set
*
* Set SiS900 receive mode for promiscuous, multicast, or broadcast mode.
......@@ -2131,7 +2131,7 @@ static void set_rx_mode(struct net_device *net_dev)
}
/**
* sis900_reset: - Reset sis900 MAC
* sis900_reset - Reset sis900 MAC
* @net_dev: the net device to reset
*
* reset sis900 MAC and wait until finished
......@@ -2166,7 +2166,7 @@ static void sis900_reset(struct net_device *net_dev)
}
/**
* sis900_remove: - Remove sis900 device
* sis900_remove - Remove sis900 device
* @pci_dev: the pci device to be removed
*
* remove and release SiS900 net device
......
......@@ -58,9 +58,9 @@ char modprobe_path[256] = "/sbin/modprobe";
* If module auto-loading support is disabled then this function
* becomes a no-operation.
*/
#define MODULENAME_SIZE 32
int request_module(const char *fmt, ...)
{
#define MODULENAME_SIZE 32
va_list args;
char module_name[MODULENAME_SIZE];
unsigned int max_modprobes;
......
......@@ -93,7 +93,7 @@ void exec_kernel_doc(char **svec)
waitpid(pid, &ret ,0);
}
if (WIFEXITED(ret))
exitstatus = WEXITSTATUS(ret);
exitstatus |= WEXITSTATUS(ret);
else
exitstatus = 0xff;
}
......
......@@ -154,6 +154,7 @@ use strict;
# '%CONST' - name of a constant.
my $errors = 0;
my $warnings = 0;
# match expressions used to find embedded type information
my $type_constant = '\%([-_\w]+)';
......@@ -1352,7 +1353,9 @@ sub create_parameterlist($$$) {
"or member '$param' not " .
"described in '$declaration_name'\n";
}
++$errors;
print STDERR "Warning(${file}:$.):".
" No description found for parameter '$param'\n";
++$warnings;
}
push @parameterlist, $param;
......@@ -1456,6 +1459,12 @@ foreach (@ARGV) {
chomp;
process_file($_);
}
if ($verbose && $errors) {
print STDERR "$errors errors\n";
}
if ($verbose && $warnings) {
print STDERR "$warnings warnings\n";
}
exit($errors);
......@@ -1580,7 +1589,7 @@ sub process_file($) {
} else {
print STDERR "Warning(${file}:$.): Cannot understand $_ on line $.",
" - I thought it was a doc line\n";
++$errors;
++$warnings;
$state = 0;
}
} elsif ($state == 2) { # look for head: lines, and include content
......@@ -1633,7 +1642,7 @@ sub process_file($) {
} else {
# i dont know - bad line? ignore.
print STDERR "Warning(${file}:$.): bad line: $_";
++$errors;
++$warnings;
}
} elsif ($state == 3) { # scanning for function { (end of prototype)
if ($decl_type eq 'function') {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment