Commit 1b04b930 authored by Sujith's avatar Sujith Committed by John W. Linville

ath9k: Cleanup Powersave flags

sc_flags has slowly become a kitchen sink over time.
Move powersave related flags to a separate variable.
Signed-off-by: default avatarSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 55624204
......@@ -425,17 +425,19 @@ void ath_deinit_leds(struct ath_softc *sc);
#define SC_OP_PROTECT_ENABLE BIT(6)
#define SC_OP_RXFLUSH BIT(7)
#define SC_OP_LED_ASSOCIATED BIT(8)
#define SC_OP_WAIT_FOR_BEACON BIT(12)
#define SC_OP_LED_ON BIT(13)
#define SC_OP_SCANNING BIT(14)
#define SC_OP_TSF_RESET BIT(15)
#define SC_OP_WAIT_FOR_CAB BIT(16)
#define SC_OP_WAIT_FOR_PSPOLL_DATA BIT(17)
#define SC_OP_WAIT_FOR_TX_ACK BIT(18)
#define SC_OP_BEACON_SYNC BIT(19)
#define SC_OP_BT_PRIORITY_DETECTED BIT(21)
#define SC_OP_NULLFUNC_COMPLETED BIT(22)
#define SC_OP_PS_ENABLED BIT(23)
#define SC_OP_LED_ON BIT(9)
#define SC_OP_SCANNING BIT(10)
#define SC_OP_TSF_RESET BIT(11)
#define SC_OP_BT_PRIORITY_DETECTED BIT(12)
/* Powersave flags */
#define PS_WAIT_FOR_BEACON BIT(0)
#define PS_WAIT_FOR_CAB BIT(1)
#define PS_WAIT_FOR_PSPOLL_DATA BIT(2)
#define PS_WAIT_FOR_TX_ACK BIT(3)
#define PS_BEACON_SYNC BIT(4)
#define PS_NULLFUNC_COMPLETED BIT(5)
#define PS_ENABLED BIT(6)
struct ath_wiphy;
struct ath_rate_table;
......@@ -471,6 +473,7 @@ struct ath_softc {
u32 intrstatus;
u32 sc_flags; /* SC_OP_* */
u16 ps_flags; /* PS_* */
u16 curtxpow;
u8 nbcnvifs;
u16 nvifs;
......
......@@ -144,10 +144,10 @@ void ath9k_ps_restore(struct ath_softc *sc)
goto unlock;
if (sc->ps_enabled &&
!(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
SC_OP_WAIT_FOR_CAB |
SC_OP_WAIT_FOR_PSPOLL_DATA |
SC_OP_WAIT_FOR_TX_ACK)))
!(sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
PS_WAIT_FOR_TX_ACK)))
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
unlock:
......@@ -424,7 +424,7 @@ void ath9k_tasklet(unsigned long data)
*/
ath_print(common, ATH_DBG_PS,
"TSFOOR - Sync with next Beacon\n");
sc->sc_flags |= SC_OP_WAIT_FOR_BEACON | SC_OP_BEACON_SYNC;
sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
}
if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
......@@ -525,7 +525,7 @@ irqreturn_t ath_isr(int irq, void *dev)
* receive frames */
ath9k_setpower(sc, ATH9K_PM_AWAKE);
ath9k_hw_setrxabort(sc->sc_ah, 0);
sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
sc->ps_flags |= PS_WAIT_FOR_BEACON;
}
chip_reset:
......@@ -833,7 +833,7 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
* on the receipt of the first Beacon frame (i.e.,
* after time sync with the AP).
*/
sc->sc_flags |= SC_OP_BEACON_SYNC;
sc->ps_flags |= PS_BEACON_SYNC;
/* Configure the beacon */
ath_beacon_config(sc, vif);
......@@ -1238,11 +1238,11 @@ static int ath9k_tx(struct ieee80211_hw *hw,
if (ieee80211_is_pspoll(hdr->frame_control)) {
ath_print(common, ATH_DBG_PS,
"Sending PS-Poll to pick a buffered frame\n");
sc->sc_flags |= SC_OP_WAIT_FOR_PSPOLL_DATA;
sc->ps_flags |= PS_WAIT_FOR_PSPOLL_DATA;
} else {
ath_print(common, ATH_DBG_PS,
"Wake up to complete TX\n");
sc->sc_flags |= SC_OP_WAIT_FOR_TX_ACK;
sc->ps_flags |= PS_WAIT_FOR_TX_ACK;
}
/*
* The actual restore operation will happen only after
......@@ -1538,7 +1538,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
*/
if (changed & IEEE80211_CONF_CHANGE_PS) {
if (conf->flags & IEEE80211_CONF_PS) {
sc->sc_flags |= SC_OP_PS_ENABLED;
sc->ps_flags |= PS_ENABLED;
if (!(ah->caps.hw_caps &
ATH9K_HW_CAP_AUTOSLEEP)) {
if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) {
......@@ -1551,23 +1551,23 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
* At this point we know hardware has received an ACK
* of a previously sent null data frame.
*/
if ((sc->sc_flags & SC_OP_NULLFUNC_COMPLETED)) {
sc->sc_flags &= ~SC_OP_NULLFUNC_COMPLETED;
if ((sc->ps_flags & PS_NULLFUNC_COMPLETED)) {
sc->ps_flags &= ~PS_NULLFUNC_COMPLETED;
sc->ps_enabled = true;
ath9k_hw_setrxabort(sc->sc_ah, 1);
}
} else {
sc->ps_enabled = false;
sc->sc_flags &= ~(SC_OP_PS_ENABLED |
SC_OP_NULLFUNC_COMPLETED);
sc->ps_flags &= ~(PS_ENABLED |
PS_NULLFUNC_COMPLETED);
ath9k_setpower(sc, ATH9K_PM_AWAKE);
if (!(ah->caps.hw_caps &
ATH9K_HW_CAP_AUTOSLEEP)) {
ath9k_hw_setrxabort(sc->sc_ah, 0);
sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON |
SC_OP_WAIT_FOR_CAB |
SC_OP_WAIT_FOR_PSPOLL_DATA |
SC_OP_WAIT_FOR_TX_ACK);
sc->ps_flags &= ~(PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
PS_WAIT_FOR_TX_ACK);
if (sc->imask & ATH9K_INT_TIM_TIMER) {
sc->imask &= ~ATH9K_INT_TIM_TIMER;
ath9k_hw_set_interrupts(sc->sc_ah,
......
......@@ -364,10 +364,10 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
if (memcmp(common->curbssid, mgmt->bssid, ETH_ALEN) != 0)
return; /* not from our current AP */
sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
sc->ps_flags &= ~PS_WAIT_FOR_BEACON;
if (sc->sc_flags & SC_OP_BEACON_SYNC) {
sc->sc_flags &= ~SC_OP_BEACON_SYNC;
if (sc->ps_flags & PS_BEACON_SYNC) {
sc->ps_flags &= ~PS_BEACON_SYNC;
ath_print(common, ATH_DBG_PS,
"Reconfigure Beacon timers based on "
"timestamp from the AP\n");
......@@ -384,17 +384,17 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
*/
ath_print(common, ATH_DBG_PS, "Received DTIM beacon indicating "
"buffered broadcast/multicast frame(s)\n");
sc->sc_flags |= SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_BEACON;
sc->ps_flags |= PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON;
return;
}
if (sc->sc_flags & SC_OP_WAIT_FOR_CAB) {
if (sc->ps_flags & PS_WAIT_FOR_CAB) {
/*
* This can happen if a broadcast frame is dropped or the AP
* fails to send a frame indicating that all CAB frames have
* been delivered.
*/
sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
sc->ps_flags &= ~PS_WAIT_FOR_CAB;
ath_print(common, ATH_DBG_PS,
"PS wait for CAB frames timed out\n");
}
......@@ -408,10 +408,10 @@ static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb)
hdr = (struct ieee80211_hdr *)skb->data;
/* Process Beacon and CAB receive in PS state */
if ((sc->sc_flags & SC_OP_WAIT_FOR_BEACON) &&
if ((sc->ps_flags & PS_WAIT_FOR_BEACON) &&
ieee80211_is_beacon(hdr->frame_control))
ath_rx_ps_beacon(sc, skb);
else if ((sc->sc_flags & SC_OP_WAIT_FOR_CAB) &&
else if ((sc->ps_flags & PS_WAIT_FOR_CAB) &&
(ieee80211_is_data(hdr->frame_control) ||
ieee80211_is_action(hdr->frame_control)) &&
is_multicast_ether_addr(hdr->addr1) &&
......@@ -420,20 +420,20 @@ static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb)
* No more broadcast/multicast frames to be received at this
* point.
*/
sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
sc->ps_flags &= ~PS_WAIT_FOR_CAB;
ath_print(common, ATH_DBG_PS,
"All PS CAB frames received, back to sleep\n");
} else if ((sc->sc_flags & SC_OP_WAIT_FOR_PSPOLL_DATA) &&
} else if ((sc->ps_flags & PS_WAIT_FOR_PSPOLL_DATA) &&
!is_multicast_ether_addr(hdr->addr1) &&
!ieee80211_has_morefrags(hdr->frame_control)) {
sc->sc_flags &= ~SC_OP_WAIT_FOR_PSPOLL_DATA;
sc->ps_flags &= ~PS_WAIT_FOR_PSPOLL_DATA;
ath_print(common, ATH_DBG_PS,
"Going back to sleep after having received "
"PS-Poll data (0x%x)\n",
sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
SC_OP_WAIT_FOR_CAB |
SC_OP_WAIT_FOR_PSPOLL_DATA |
SC_OP_WAIT_FOR_TX_ACK));
sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
PS_WAIT_FOR_TX_ACK));
}
}
......@@ -631,9 +631,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
sc->rx.rxotherant = 0;
}
if (unlikely(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
SC_OP_WAIT_FOR_CAB |
SC_OP_WAIT_FOR_PSPOLL_DATA)))
if (unlikely(sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA)))
ath_rx_ps(sc, skb);
ath_rx_send_to_mac80211(hw, sc, skb, rxs);
......
......@@ -1648,7 +1648,7 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
/* tag if this is a nullfunc frame to enable PS when AP acks it */
if (ieee80211_is_nullfunc(fc) && ieee80211_has_pm(fc)) {
bf->bf_isnullfunc = true;
sc->sc_flags &= ~SC_OP_NULLFUNC_COMPLETED;
sc->ps_flags &= ~PS_NULLFUNC_COMPLETED;
} else
bf->bf_isnullfunc = false;
......@@ -1858,15 +1858,15 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
skb_pull(skb, padsize);
}
if (sc->sc_flags & SC_OP_WAIT_FOR_TX_ACK) {
sc->sc_flags &= ~SC_OP_WAIT_FOR_TX_ACK;
if (sc->ps_flags & PS_WAIT_FOR_TX_ACK) {
sc->ps_flags &= ~PS_WAIT_FOR_TX_ACK;
ath_print(common, ATH_DBG_PS,
"Going back to sleep after having "
"received TX status (0x%x)\n",
sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
SC_OP_WAIT_FOR_CAB |
SC_OP_WAIT_FOR_PSPOLL_DATA |
SC_OP_WAIT_FOR_TX_ACK));
sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
PS_WAIT_FOR_TX_ACK));
}
if (unlikely(tx_info->pad[0] & ATH_TX_INFO_FRAME_TYPE_INTERNAL))
......@@ -2053,11 +2053,11 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
*/
if (bf->bf_isnullfunc &&
(ds->ds_txstat.ts_status & ATH9K_TX_ACKED)) {
if ((sc->sc_flags & SC_OP_PS_ENABLED)) {
if ((sc->ps_flags & PS_ENABLED)) {
sc->ps_enabled = true;
ath9k_hw_setrxabort(sc->sc_ah, 1);
} else
sc->sc_flags |= SC_OP_NULLFUNC_COMPLETED;
sc->ps_flags |= PS_NULLFUNC_COMPLETED;
}
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment