Commit 1b66a76f authored by Linus Torvalds's avatar Linus Torvalds

Merge bk://bk.arm.linux.org.uk/linux-2.6-rmk

into evo.osdl.org:/home/torvalds/v2.6/linux
parents 56d1317d 1b26d7ab
Kernel Memory Layout on ARM Linux Kernel Memory Layout on ARM Linux
Russell King <rmk@arm.linux.org.uk> Russell King <rmk@arm.linux.org.uk>
April 27, 2003 (2.5.68) May 21, 2004 (2.6.6)
This document describes the virtual memory layout which the Linux This document describes the virtual memory layout which the Linux
kernel uses for ARM processors. It indicates which regions are kernel uses for ARM processors. It indicates which regions are
...@@ -29,32 +29,30 @@ ffff0000 ffff0fff CPU vector page. ...@@ -29,32 +29,30 @@ ffff0000 ffff0fff CPU vector page.
CPU supports vector relocation (control CPU supports vector relocation (control
register V bit.) register V bit.)
ffe00000 fffeffff Free for platform use, not recommended. ffc00000 fffeffff DMA memory mapping region. Memory returned
by the dma_alloc_xxx functions will be
dynamically mapped here.
ffc00000 ffdfffff 2MB consistent memory mapping. ff000000 ffbfffff Reserved for future expansion of DMA
Memory returned by the consistent_alloc mapping region.
low level function will be dynamically
mapped here.
ff000000 ffbfffff Free for platform use, not recommended. VMALLOC_END feffffff Free for platform use, recommended.
VMALLOC_END ff000000 Free for platform use, recommended. VMALLOC_START VMALLOC_END-1 vmalloc() / ioremap() space.
VMALLOC_START VMALLOC_END vmalloc() / ioremap() space.
Memory returned by vmalloc/ioremap will Memory returned by vmalloc/ioremap will
be dynamically placed in this region. be dynamically placed in this region.
VMALLOC_START may be based upon the value VMALLOC_START may be based upon the value
of the high_memory variable. of the high_memory variable.
PAGE_OFFSET high_memory Kernel direct-mapped RAM region. PAGE_OFFSET high_memory-1 Kernel direct-mapped RAM region.
This maps the platforms RAM, and typically This maps the platforms RAM, and typically
maps all platform RAM in a 1:1 relationship. maps all platform RAM in a 1:1 relationship.
TASK_SIZE PAGE_OFFSET Kernel module space TASK_SIZE PAGE_OFFSET-1 Kernel module space
Kernel modules inserted via insmod are Kernel modules inserted via insmod are
placed here using dynamic mappings. placed here using dynamic mappings.
00001000 TASK_SIZE User space mappings 00001000 TASK_SIZE-1 User space mappings
Per-thread mappings are placed here via Per-thread mappings are placed here via
the mmap() system call. the mmap() system call.
......
...@@ -86,6 +86,20 @@ ...@@ -86,6 +86,20 @@
.macro writeb, rb .macro writeb, rb
strb \rb, [r3, #0] strb \rb, [r3, #0]
.endm .endm
#elif defined(CONFIG_ARCH_OMAP)
.macro loadsp, rb
mov \rb, #0xff000000 @ physical base address
add \rb, \rb, #0x00fb0000
#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
add \rb, \rb, #0x00000800
#endif
#ifdef CONFIG_OMAP_LL_DEBUG_UART3
add \rb, \rb, #0x00009000
#endif
.endm
.macro writeb, rb
strb \rb, [r3]
.endm
#else #else
#error no serial architecture defined #error no serial architecture defined
#endif #endif
......
...@@ -253,6 +253,9 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) ...@@ -253,6 +253,9 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe; goto badframe;
if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->ARM_sp) == -EFAULT)
goto badframe;
/* Send SIGTRAP if we're single-stepping */ /* Send SIGTRAP if we're single-stepping */
if (current->ptrace & PT_SINGLESTEP) { if (current->ptrace & PT_SINGLESTEP) {
ptrace_cancel_bpt(current); ptrace_cancel_bpt(current);
...@@ -402,6 +405,7 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info, ...@@ -402,6 +405,7 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs) sigset_t *set, struct pt_regs *regs)
{ {
struct rt_sigframe __user *frame = get_sigframe(ka, regs, sizeof(*frame)); struct rt_sigframe __user *frame = get_sigframe(ka, regs, sizeof(*frame));
stack_t stack;
int err = 0; int err = 0;
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame))) if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
...@@ -411,8 +415,14 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info, ...@@ -411,8 +415,14 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
__put_user_error(&frame->uc, &frame->puc, err); __put_user_error(&frame->uc, &frame->puc, err);
err |= copy_siginfo_to_user(&frame->info, info); err |= copy_siginfo_to_user(&frame->info, info);
/* Clear all the bits of the ucontext we don't use. */ __put_user_error(0, &frame->uc.uc_flags, err);
err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext)); __put_user_error(NULL, &frame->uc.uc_link, err);
memset(&stack, 0, sizeof(stack));
stack.ss_sp = (void *)current->sas_ss_sp;
stack.ss_flags = sas_ss_flags(regs->ARM_sp);
stack.ss_size = current->sas_ss_size;
err |= __copy_to_user(&frame->uc.uc_stack, &stack, sizeof(stack));
err |= setup_sigcontext(&frame->uc.uc_mcontext, /*&frame->fpstate,*/ err |= setup_sigcontext(&frame->uc.uc_mcontext, /*&frame->fpstate,*/
regs, set->sig[0]); regs, set->sig[0]);
......
...@@ -24,7 +24,6 @@ lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o ...@@ -24,7 +24,6 @@ lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o
lib-$(CONFIG_ARCH_CLPS7500) += io-acorn.o lib-$(CONFIG_ARCH_CLPS7500) += io-acorn.o
lib-$(CONFIG_ARCH_L7200) += io-acorn.o lib-$(CONFIG_ARCH_L7200) += io-acorn.o
lib-$(CONFIG_ARCH_SHARK) += io-shark.o lib-$(CONFIG_ARCH_SHARK) += io-shark.o
lib-$(CONFIG_ARCH_CLPS711X) += io-acorn.o
$(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S $(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S
$(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S $(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S
...@@ -17,31 +17,6 @@ ...@@ -17,31 +17,6 @@
.text .text
.align .align
.equ diff_pcio_base, PCIO_BASE - IO_BASE
.macro outw2 rd
mov r8, \rd, lsl #16
orr r8, r8, r8, lsr #16
str r8, [r3, r0, lsl #2]
mov r8, \rd, lsr #16
orr r8, r8, r8, lsl #16
str r8, [r3, r0, lsl #2]
.endm
.macro inw2 rd, mask, temp
ldr \rd, [r0]
and \rd, \rd, \mask
ldr \temp, [r0]
orr \rd, \rd, \temp, lsl #16
.endm
.macro addr rd
tst \rd, #0x80000000
mov \rd, \rd, lsl #2
add \rd, \rd, #IO_BASE
addeq \rd, \rd, #diff_pcio_base
.endm
.iosl_warning: .iosl_warning:
.ascii "<4>insl/outsl not implemented, called from %08lX\0" .ascii "<4>insl/outsl not implemented, called from %08lX\0"
.align .align
......
if ARCH_CLPS711X
menu "CLPS711X/EP721X Implementations" menu "CLPS711X/EP721X Implementations"
config ARCH_AUTCPU12 config ARCH_AUTCPU12
bool "AUTCPU12" bool "AUTCPU12"
depends on ARCH_CLPS711X
help help
Say Y if you intend to run the kernel on the autronix autcpu12 Say Y if you intend to run the kernel on the autronix autcpu12
board. This board is based on a Cirrus Logic CS89712. board. This board is based on a Cirrus Logic CS89712.
config ARCH_CDB89712 config ARCH_CDB89712
bool "CDB89712" bool "CDB89712"
depends on ARCH_CLPS711X
help help
This is an evaluation board from Cirrus for the CS89712 processor. This is an evaluation board from Cirrus for the CS89712 processor.
The board includes 2 serial ports, Ethernet, IRDA, and expansion The board includes 2 serial ports, Ethernet, IRDA, and expansion
...@@ -18,32 +17,27 @@ config ARCH_CDB89712 ...@@ -18,32 +17,27 @@ config ARCH_CDB89712
config ARCH_CEIVA config ARCH_CEIVA
bool "CEIVA" bool "CEIVA"
depends on ARCH_CLPS711X
help help
Say Y here if you intend to run this kernel on the Ceiva/Polaroid Say Y here if you intend to run this kernel on the Ceiva/Polaroid
PhotoMax Digital Picture Frame. PhotoMax Digital Picture Frame.
config ARCH_CLEP7312 config ARCH_CLEP7312
bool "CLEP7312" bool "CLEP7312"
depends on ARCH_CLPS711X
config ARCH_EDB7211 config ARCH_EDB7211
bool "EDB7211" bool "EDB7211"
depends on ARCH_CLPS711X
help help
Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
evaluation board. evaluation board.
config ARCH_P720T config ARCH_P720T
bool "P720T" bool "P720T"
depends on ARCH_CLPS711X
help help
Say Y here if you intend to run this kernel on the ARM Prospector Say Y here if you intend to run this kernel on the ARM Prospector
720T. 720T.
config ARCH_FORTUNET config ARCH_FORTUNET
bool "FORTUNET" bool "FORTUNET"
depends on ARCH_CLPS711X
# XXX Maybe these should indicate register compatibility # XXX Maybe these should indicate register compatibility
# instead of being mutually exclusive. # instead of being mutually exclusive.
...@@ -74,3 +68,4 @@ config EP72XX_ROM_BOOT ...@@ -74,3 +68,4 @@ config EP72XX_ROM_BOOT
endmenu endmenu
endif
if ARCH_CAMELOT
menu "Epxa10db" menu "Epxa10db"
comment "PLD hotswap support" comment "PLD hotswap support"
depends on ARCH_CAMELOT
config PLD config PLD
bool bool
depends on ARCH_CAMELOT
default y default y
config PLD_HOTSWAP config PLD_HOTSWAP
bool "Support for PLD device hotplugging (experimental)" bool "Support for PLD device hotplugging (experimental)"
depends on ARCH_CAMELOT && EXPERIMENTAL depends on EXPERIMENTAL
help help
This enables support for the dynamic loading and configuration of This enables support for the dynamic loading and configuration of
compatible drivers when the contents of the PLD are changed. This compatible drivers when the contents of the PLD are changed. This
...@@ -21,3 +20,4 @@ config PLD_HOTSWAP ...@@ -21,3 +20,4 @@ config PLD_HOTSWAP
endmenu endmenu
endif
if ARCH_FOOTBRIDGE
menu "Footbridge Implementations" menu "Footbridge Implementations"
config ARCH_CATS config ARCH_CATS
bool "CATS" bool "CATS"
depends on ARCH_FOOTBRIDGE
help help
Say Y here if you intend to run this kernel on the CATS. Say Y here if you intend to run this kernel on the CATS.
...@@ -11,7 +11,6 @@ config ARCH_CATS ...@@ -11,7 +11,6 @@ config ARCH_CATS
config ARCH_PERSONAL_SERVER config ARCH_PERSONAL_SERVER
bool "Compaq Personal Server" bool "Compaq Personal Server"
depends on ARCH_FOOTBRIDGE
---help--- ---help---
Say Y here if you intend to run this kernel on the Compaq Say Y here if you intend to run this kernel on the Compaq
Personal Server. Personal Server.
...@@ -29,7 +28,6 @@ config ARCH_PERSONAL_SERVER ...@@ -29,7 +28,6 @@ config ARCH_PERSONAL_SERVER
config ARCH_EBSA285_ADDIN config ARCH_EBSA285_ADDIN
bool "EBSA285 (addin mode)" bool "EBSA285 (addin mode)"
depends on ARCH_FOOTBRIDGE
help help
Say Y here if you intend to run this kernel on the EBSA285 card Say Y here if you intend to run this kernel on the EBSA285 card
in addin mode. in addin mode.
...@@ -38,7 +36,6 @@ config ARCH_EBSA285_ADDIN ...@@ -38,7 +36,6 @@ config ARCH_EBSA285_ADDIN
config ARCH_EBSA285_HOST config ARCH_EBSA285_HOST
bool "EBSA285 (host mode)" bool "EBSA285 (host mode)"
depends on ARCH_FOOTBRIDGE
help help
Say Y here if you intend to run this kernel on the EBSA285 card Say Y here if you intend to run this kernel on the EBSA285 card
in host ("central function") mode. in host ("central function") mode.
...@@ -47,7 +44,6 @@ config ARCH_EBSA285_HOST ...@@ -47,7 +44,6 @@ config ARCH_EBSA285_HOST
config ARCH_NETWINDER config ARCH_NETWINDER
bool "NetWinder" bool "NetWinder"
depends on ARCH_FOOTBRIDGE
help help
Say Y here if you intend to run this kernel on the Rebel.COM Say Y here if you intend to run this kernel on the Rebel.COM
NetWinder. Information about this machine can be found at: NetWinder. Information about this machine can be found at:
...@@ -58,3 +54,4 @@ config ARCH_NETWINDER ...@@ -58,3 +54,4 @@ config ARCH_NETWINDER
endmenu endmenu
endif
if ARCH_INTEGRATOR
menu "Integrator Options" menu "Integrator Options"
depends on ARCH_INTEGRATOR
config ARCH_INTEGRATOR_AP config ARCH_INTEGRATOR_AP
bool "Support Integrator/AP and Integrator/PP2 platforms" bool "Support Integrator/AP and Integrator/PP2 platforms"
...@@ -28,3 +29,5 @@ config INTEGRATOR_IMPD1 ...@@ -28,3 +29,5 @@ config INTEGRATOR_IMPD1
module will be called impd1. module will be called impd1.
endmenu endmenu
endif
if ARCH_IOP3XX
menu "IOP3xx Implementation Options" menu "IOP3xx Implementation Options"
choice choice
prompt "IOP3xx System Type" prompt "IOP3xx System Type"
default ARCH_IQ80310 default ARCH_IQ80310
depends on ARCH_IOP3XX
config ARCH_IQ80310 config ARCH_IQ80310
bool "IQ80310" bool "IQ80310"
...@@ -36,19 +36,20 @@ comment "IOP3xx Chipset Features" ...@@ -36,19 +36,20 @@ comment "IOP3xx Chipset Features"
config IOP3XX_AAU config IOP3XX_AAU
bool "Support Intel IOP3xx Application Accelerator Unit (EXPERIMENTAL)" bool "Support Intel IOP3xx Application Accelerator Unit (EXPERIMENTAL)"
depends on ARCH_IOP3XX && EXPERIMENTAL depends on EXPERIMENTAL
config IOP3XX_DMA config IOP3XX_DMA
bool "Support Intel IOP3xx DMA (EXPERIMENTAL)" bool "Support Intel IOP3xx DMA (EXPERIMENTAL)"
depends on ARCH_IOP3XX && EXPERIMENTAL depends on EXPERIMENTAL
config IOP3XX_MU config IOP3XX_MU
bool "Support Intel IOP3xx Messaging Unit (EXPERIMENTAL)" bool "Support Intel IOP3xx Messaging Unit (EXPERIMENTAL)"
depends on ARCH_IOP3XX && EXPERIMENTAL depends on EXPERIMENTAL
config IOP3XX_PMON config IOP3XX_PMON
bool "Support Intel IOP3xx Performance Monitor (EXPERIMENTAL)" bool "Support Intel IOP3xx Performance Monitor (EXPERIMENTAL)"
depends on ARCH_IOP3XX && EXPERIMENTAL depends on EXPERIMENTAL
endmenu endmenu
endif
if ARCH_IXP4XX
config ARCH_SUPPORTS_BIG_ENDIAN config ARCH_SUPPORTS_BIG_ENDIAN
bool bool
depends on ARCH_IXP4XX
default y default y
menu "Intel IXP4xx Implementation Options" menu "Intel IXP4xx Implementation Options"
...@@ -10,7 +10,6 @@ comment "IXP4xx Platforms" ...@@ -10,7 +10,6 @@ comment "IXP4xx Platforms"
config ARCH_AVILA config ARCH_AVILA
bool "Avila" bool "Avila"
depends on ARCH_IXP4XX
help help
Say 'Y' here if you want your kernel to support the Gateworks Say 'Y' here if you want your kernel to support the Gateworks
Avila Network Platform. For more information on this platform, Avila Network Platform. For more information on this platform,
...@@ -18,7 +17,6 @@ config ARCH_AVILA ...@@ -18,7 +17,6 @@ config ARCH_AVILA
config ARCH_ADI_COYOTE config ARCH_ADI_COYOTE
bool "Coyote" bool "Coyote"
depends on ARCH_IXP4XX
help help
Say 'Y' here if you want your kernel to support the ADI Say 'Y' here if you want your kernel to support the ADI
Engineering Coyote Gateway Reference Platform. For more Engineering Coyote Gateway Reference Platform. For more
...@@ -26,7 +24,6 @@ config ARCH_ADI_COYOTE ...@@ -26,7 +24,6 @@ config ARCH_ADI_COYOTE
config ARCH_IXDP425 config ARCH_IXDP425
bool "IXDP425" bool "IXDP425"
depends on ARCH_IXP4XX
help help
Say 'Y' here if you want your kernel to support Intel's Say 'Y' here if you want your kernel to support Intel's
IXDP425 Development Platform (Also known as Richfield). IXDP425 Development Platform (Also known as Richfield).
...@@ -44,7 +41,6 @@ config ARCH_IXCDP1100 ...@@ -44,7 +41,6 @@ config ARCH_IXCDP1100
config ARCH_PRPMC1100 config ARCH_PRPMC1100
bool "PrPMC1100" bool "PrPMC1100"
depends on ARCH_IXP4XX
help help
Say 'Y' here if you want your kernel to support the Motorola Say 'Y' here if you want your kernel to support the Motorola
PrPCM1100 Processor Mezanine Module. For more information on PrPCM1100 Processor Mezanine Module. For more information on
...@@ -62,7 +58,6 @@ comment "IXP4xx Options" ...@@ -62,7 +58,6 @@ comment "IXP4xx Options"
config IXP4XX_INDIRECT_PCI config IXP4XX_INDIRECT_PCI
bool "Use indirect PCI memory access" bool "Use indirect PCI memory access"
depends on ARCH_IXP4XX
help help
IXP4xx provides two methods of accessing PCI memory space: IXP4xx provides two methods of accessing PCI memory space:
...@@ -87,3 +82,5 @@ config IXP4XX_INDIRECT_PCI ...@@ -87,3 +82,5 @@ config IXP4XX_INDIRECT_PCI
what you need, leave this option unselected. what you need, leave this option unselected.
endmenu endmenu
endif
if ARCH_LH7A40X
menu "LH7A40X Implementations" menu "LH7A40X Implementations"
config MACH_KEV7A400 config MACH_KEV7A400
bool "KEV7A400" bool "KEV7A400"
depends on ARCH_LH7A40X
select ARCH_LH7A400 select ARCH_LH7A400
help help
Say Y here if you are using the Sharp KEV7A400 development Say Y here if you are using the Sharp KEV7A400 development
...@@ -12,9 +12,8 @@ config MACH_KEV7A400 ...@@ -12,9 +12,8 @@ config MACH_KEV7A400
config MACH_LPD7A400 config MACH_LPD7A400
bool "LPD7A400 Card Engine" bool "LPD7A400 Card Engine"
depends on ARCH_LH7A40X
select ARCH_LH7A400 select ARCH_LH7A400
select IDE_POLL # select IDE_POLL
help help
Say Y here if you are using Logic Product Development's Say Y here if you are using Logic Product Development's
LPD7A400 CardEngine. For the time being, the LPD7A400 and LPD7A400 CardEngine. For the time being, the LPD7A400 and
...@@ -22,9 +21,8 @@ config MACH_LPD7A400 ...@@ -22,9 +21,8 @@ config MACH_LPD7A400
config MACH_LPD7A404 config MACH_LPD7A404
bool "LPD7A404 Card Engine" bool "LPD7A404 Card Engine"
depends on ARCH_LH7A40X
select ARCH_LH7A404 select ARCH_LH7A404
select IDE_POLL # select IDE_POLL
help help
Say Y here if you are using Logic Product Development's Say Y here if you are using Logic Product Development's
LPD7A404 CardEngine. For the time being, the LPD7A400 and LPD7A404 CardEngine. For the time being, the LPD7A400 and
...@@ -37,3 +35,5 @@ config ARCH_LH7A404 ...@@ -37,3 +35,5 @@ config ARCH_LH7A404
bool bool
endmenu endmenu
endif
if ARCH_OMAP
menu "TI OMAP Implementations" menu "TI OMAP Implementations"
comment "OMAP Core Type" comment "OMAP Core Type"
config ARCH_OMAP730 config ARCH_OMAP730
depends on ARCH_OMAP
bool "OMAP730 Based System" bool "OMAP730 Based System"
select CPU_ARM926T select CPU_ARM926T
config ARCH_OMAP1510 config ARCH_OMAP1510
depends on ARCH_OMAP
default y default y
bool "OMAP1510 Based System" bool "OMAP1510 Based System"
select CPU_ARM925T select CPU_ARM925T
select CPU_DCACHE_WRITETHROUGH select CPU_DCACHE_WRITETHROUGH
config ARCH_OMAP1610 config ARCH_OMAP1610
depends on ARCH_OMAP
bool "OMAP1610 Based System" bool "OMAP1610 Based System"
select CPU_ARM926T select CPU_ARM926T
config ARCH_OMAP5912 config ARCH_OMAP5912
depends on ARCH_OMAP
bool "OMAP5912 Based System" bool "OMAP5912 Based System"
select CPU_ARM926T select CPU_ARM926T
...@@ -87,7 +84,6 @@ comment "OMAP Feature Selections" ...@@ -87,7 +84,6 @@ comment "OMAP Feature Selections"
#config OMAP_BOOT_TAG #config OMAP_BOOT_TAG
# bool "OMAP bootloader information passing" # bool "OMAP bootloader information passing"
# depends on ARCH_OMAP
# default n # default n
# help # help
# Say Y, if you have a bootloader which passes information # Say Y, if you have a bootloader which passes information
...@@ -95,7 +91,6 @@ comment "OMAP Feature Selections" ...@@ -95,7 +91,6 @@ comment "OMAP Feature Selections"
config OMAP_MUX config OMAP_MUX
bool "OMAP multiplexing support" bool "OMAP multiplexing support"
depends on ARCH_OMAP
default y default y
help help
Pin multiplexing support for OMAP boards. If your bootloader Pin multiplexing support for OMAP boards. If your bootloader
...@@ -113,7 +108,6 @@ config OMAP_MUX_DEBUG ...@@ -113,7 +108,6 @@ config OMAP_MUX_DEBUG
choice choice
prompt "Low-level debug console UART" prompt "Low-level debug console UART"
depends on ARCH_OMAP
default OMAP_LL_DEBUG_UART1 default OMAP_LL_DEBUG_UART1
config OMAP_LL_DEBUG_UART1 config OMAP_LL_DEBUG_UART1
...@@ -171,3 +165,5 @@ config OMAP_ARM_30MHZ ...@@ -171,3 +165,5 @@ config OMAP_ARM_30MHZ
Enable 30MHz clock for OMAP CPU. If unsure, say N. Enable 30MHz clock for OMAP CPU. If unsure, say N.
endmenu endmenu
endif
...@@ -18,6 +18,7 @@ ...@@ -18,6 +18,7 @@
#include <linux/device.h> #include <linux/device.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach/map.h> #include <asm/mach/map.h>
...@@ -64,7 +65,7 @@ static void __init omap_generic_map_io(void) ...@@ -64,7 +65,7 @@ static void __init omap_generic_map_io(void)
omap_map_io(); omap_map_io();
} }
MACHINE_START(OMAP_GENERIC, "Generic OMAP-1510/1610") MACHINE_START(OMAP_GENERIC, "Generic OMAP-1510/1610/1710")
MAINTAINER("Tony Lindgren <tony@atomide.com>") MAINTAINER("Tony Lindgren <tony@atomide.com>")
BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
BOOT_PARAMS(0x10000100) BOOT_PARAMS(0x10000100)
......
...@@ -19,8 +19,10 @@ ...@@ -19,8 +19,10 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/delay.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach/map.h> #include <asm/mach/map.h>
...@@ -36,14 +38,14 @@ extern int omap_gpio_init(void); ...@@ -36,14 +38,14 @@ extern int omap_gpio_init(void);
/* Only FPGA needs to be mapped here. All others are done with ioremap */ /* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc innovator1510_io_desc[] __initdata = { static struct map_desc innovator1510_io_desc[] __initdata = {
{ OMAP1510P1_FPGA_BASE, OMAP1510P1_FPGA_START, OMAP1510P1_FPGA_SIZE, { OMAP1510_FPGA_BASE, OMAP1510_FPGA_START, OMAP1510_FPGA_SIZE,
MT_DEVICE }, MT_DEVICE },
}; };
static struct resource innovator1510_smc91x_resources[] = { static struct resource innovator1510_smc91x_resources[] = {
[0] = { [0] = {
.start = OMAP1510P1_FPGA_ETHR_START, /* Physical */ .start = OMAP1510_FPGA_ETHR_START, /* Physical */
.end = OMAP1510P1_FPGA_ETHR_START + 16, .end = OMAP1510_FPGA_ETHR_START + 16,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
[1] = { [1] = {
...@@ -132,12 +134,13 @@ static void __init innovator_map_io(void) ...@@ -132,12 +134,13 @@ static void __init innovator_map_io(void)
#ifdef CONFIG_ARCH_OMAP1510 #ifdef CONFIG_ARCH_OMAP1510
if (cpu_is_omap1510()) { if (cpu_is_omap1510()) {
iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
udelay(10); /* Delay needed for FPGA */
/* Dump the Innovator FPGA rev early - useful info for support. */ /* Dump the Innovator FPGA rev early - useful info for support. */
printk("Innovator FPGA Rev %d.%d Board Rev %d\n", printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
fpga_read(OMAP1510P1_FPGA_REV_HIGH), fpga_read(OMAP1510_FPGA_REV_HIGH),
fpga_read(OMAP1510P1_FPGA_REV_LOW), fpga_read(OMAP1510_FPGA_REV_LOW),
fpga_read(OMAP1510P1_FPGA_BOARD_REV)); fpga_read(OMAP1510_FPGA_BOARD_REV));
} }
#endif #endif
#ifdef CONFIG_ARCH_OMAP1610 #ifdef CONFIG_ARCH_OMAP1610
......
...@@ -31,6 +31,7 @@ ...@@ -31,6 +31,7 @@
#include <linux/device.h> #include <linux/device.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach/map.h> #include <asm/mach/map.h>
......
...@@ -3,6 +3,9 @@ ...@@ -3,6 +3,9 @@
* *
* Modified from board-generic.c * Modified from board-generic.c
* *
* Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
* Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
*
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation. * published by the Free Software Foundation.
...@@ -13,6 +16,7 @@ ...@@ -13,6 +16,7 @@
#include <linux/device.h> #include <linux/device.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach/map.h> #include <asm/mach/map.h>
...@@ -102,7 +106,7 @@ static void __init omap_perseus2_map_io(void) ...@@ -102,7 +106,7 @@ static void __init omap_perseus2_map_io(void)
} }
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
MAINTAINER("Kevin Hilman <k-hilman@ti.com>") MAINTAINER("Kevin Hilman <kjh@hilman.org>")
BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
BOOT_PARAMS(0x10000100) BOOT_PARAMS(0x10000100)
MAPIO(omap_perseus2_map_io) MAPIO(omap_perseus2_map_io)
......
...@@ -39,6 +39,7 @@ ...@@ -39,6 +39,7 @@
#include <linux/spinlock.h> #include <linux/spinlock.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
...@@ -265,7 +266,7 @@ static void __exit omap_bus_exit(void) ...@@ -265,7 +266,7 @@ static void __exit omap_bus_exit(void)
} }
} }
module_init(omap_bus_init); postcore_initcall(omap_bus_init);
module_exit(omap_bus_exit); module_exit(omap_bus_exit);
MODULE_DESCRIPTION("Virtual bus for OMAP"); MODULE_DESCRIPTION("Virtual bus for OMAP");
......
...@@ -84,7 +84,7 @@ static ck_info_t ck_info_table[] = { ...@@ -84,7 +84,7 @@ static ck_info_t ck_info_table[] = {
}, { }, {
.name = "ck_gen1", .name = "ck_gen1",
.flags = CK_RATEF | CK_IDLEF, .flags = CK_RATEF | CK_IDLEF,
.rate_reg = CK_DPLL1, .rate_reg = DPLL_CTL,
.idle_reg = ARM_IDLECT1, .idle_reg = ARM_IDLECT1,
.idle_shift = IDLDPLL_ARM, .idle_shift = IDLDPLL_ARM,
.parent = OMAP_CLKIN, .parent = OMAP_CLKIN,
...@@ -629,39 +629,39 @@ init_ck(void) ...@@ -629,39 +629,39 @@ init_ck(void)
omap_writew(0x1000, ARM_SYSST); omap_writew(0x1000, ARM_SYSST);
#if defined(CONFIG_OMAP_ARM_30MHZ) #if defined(CONFIG_OMAP_ARM_30MHZ)
omap_writew(0x1555, ARM_CKCTL); omap_writew(0x1555, ARM_CKCTL);
omap_writew(0x2290, DPLL_CTL_REG); omap_writew(0x2290, DPLL_CTL);
#elif defined(CONFIG_OMAP_ARM_60MHZ) #elif defined(CONFIG_OMAP_ARM_60MHZ)
omap_writew(0x1005, ARM_CKCTL); omap_writew(0x1005, ARM_CKCTL);
omap_writew(0x2290, DPLL_CTL_REG); omap_writew(0x2290, DPLL_CTL);
#elif defined(CONFIG_OMAP_ARM_96MHZ) #elif defined(CONFIG_OMAP_ARM_96MHZ)
omap_writew(0x1005, ARM_CKCTL); omap_writew(0x1005, ARM_CKCTL);
omap_writew(0x2410, DPLL_CTL_REG); omap_writew(0x2410, DPLL_CTL);
#elif defined(CONFIG_OMAP_ARM_120MHZ) #elif defined(CONFIG_OMAP_ARM_120MHZ)
omap_writew(0x110a, ARM_CKCTL); omap_writew(0x110a, ARM_CKCTL);
omap_writew(0x2510, DPLL_CTL_REG); omap_writew(0x2510, DPLL_CTL);
#elif defined(CONFIG_OMAP_ARM_168MHZ) #elif defined(CONFIG_OMAP_ARM_168MHZ)
omap_writew(0x110f, ARM_CKCTL); omap_writew(0x110f, ARM_CKCTL);
omap_writew(0x2710, DPLL_CTL_REG); omap_writew(0x2710, DPLL_CTL);
#elif defined(CONFIG_OMAP_ARM_182MHZ) && defined(CONFIG_ARCH_OMAP730) #elif defined(CONFIG_OMAP_ARM_182MHZ) && defined(CONFIG_ARCH_OMAP730)
omap_writew(0x250E, ARM_CKCTL); omap_writew(0x250E, ARM_CKCTL);
omap_writew(0x2710, DPLL_CTL_REG); omap_writew(0x2710, DPLL_CTL);
#elif defined(CONFIG_OMAP_ARM_192MHZ) && (defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP5912)) #elif defined(CONFIG_OMAP_ARM_192MHZ) && (defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP5912))
omap_writew(0x150f, ARM_CKCTL); omap_writew(0x150f, ARM_CKCTL);
if (crystal_type == 2) { if (crystal_type == 2) {
source_clock = 13; /* MHz */ source_clock = 13; /* MHz */
omap_writew(0x2510, DPLL_CTL_REG); omap_writew(0x2510, DPLL_CTL);
} else } else
omap_writew(0x2810, DPLL_CTL_REG); omap_writew(0x2810, DPLL_CTL);
#elif defined(CONFIG_OMAP_ARM_195MHZ) && defined(CONFIG_ARCH_OMAP730) #elif defined(CONFIG_OMAP_ARM_195MHZ) && defined(CONFIG_ARCH_OMAP730)
omap_writew(0x250E, ARM_CKCTL); omap_writew(0x250E, ARM_CKCTL);
omap_writew(0x2790, DPLL_CTL_REG); omap_writew(0x2790, DPLL_CTL);
#else #else
#error "OMAP MHZ not set, please run make xconfig" #error "OMAP MHZ not set, please run make xconfig"
#endif #endif
#ifdef CONFIG_MACH_OMAP_PERSEUS2 #ifdef CONFIG_MACH_OMAP_PERSEUS2
/* Select slicer output as OMAP input clock */ /* Select slicer output as OMAP input clock */
omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL_REG) & ~0x1, OMAP730_PCC_UPLD_CTRL_REG); omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
#endif #endif
/* Turn off some other junk the bootloader might have turned on */ /* Turn off some other junk the bootloader might have turned on */
......
...@@ -23,6 +23,58 @@ ...@@ -23,6 +23,58 @@
#include <asm/arch/board.h> #include <asm/arch/board.h>
#include <asm/io.h> #include <asm/io.h>
/*
* ----------------------------------------------------------------------------
* OMAP revision check
*
* Since we use the cpu_is_omapnnnn() macros, there's a chance that a board
* switches to an updated core. We want to print out the OMAP revision early.
*
* We use the system_serial registers for the revision information so we
* can see it in /proc/cpuinfo.
*
* If the OMAP detection gets more complicated, we may want to expand this
* to store the OMAP version and replace the current cpu_is_omapnnnn() macros.
*
* ----------------------------------------------------------------------------
*/
static void __init omap_check_revision(void)
{
system_serial_high = omap_readl(OMAP_ID_BASE);
system_serial_low = OMAP_ID_REG;
system_rev = (OMAP_ID_REG >> ID_SHIFT) & ID_MASK;
printk("OMAP revision: %d.%d (0x%08x) id: 0x%08x detected as OMAP-",
(system_serial_high >> 20) & 0xf,
(system_serial_high >> 16) & 0xf,
system_serial_high, system_serial_low);
switch (system_rev) {
case OMAP_ID_730:
printk("730\n");
system_rev = 0x730;
break;
case OMAP_ID_1510:
printk("1510\n");
system_rev = 0x1510;
break;
case OMAP_ID_1610:
printk("1610\n");
system_rev = 0x1610;
break;
case OMAP_ID_1710:
printk("1710\n");
system_rev = 0x1710;
break;
case OMAP_ID_5912:
printk("5912/1611B\n");
system_rev = 0x5912;
break;
default:
printk("unknown, please add support!\n");
}
}
/* /*
* ---------------------------------------------------------------------------- * ----------------------------------------------------------------------------
* OMAP I/O mapping * OMAP I/O mapping
...@@ -64,7 +116,13 @@ static struct map_desc omap1610_io_desc[] __initdata = { ...@@ -64,7 +116,13 @@ static struct map_desc omap1610_io_desc[] __initdata = {
static struct map_desc omap5912_io_desc[] __initdata = { static struct map_desc omap5912_io_desc[] __initdata = {
{ OMAP5912_DSP_BASE, OMAP5912_DSP_START, OMAP5912_DSP_SIZE, MT_DEVICE }, { OMAP5912_DSP_BASE, OMAP5912_DSP_START, OMAP5912_DSP_SIZE, MT_DEVICE },
{ OMAP5912_DSPREG_BASE, OMAP5912_DSPREG_START, OMAP5912_DSPREG_SIZE, MT_DEVICE }, { OMAP5912_DSPREG_BASE, OMAP5912_DSPREG_START, OMAP5912_DSPREG_SIZE, MT_DEVICE },
{ OMAP5912_SRAM_BASE, OMAP5912_SRAM_START, OMAP5912_SRAM_SIZE, MT_DEVICE } /*
* The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page
* size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped.
* Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte
* can be used.
*/
{ OMAP5912_SRAM_BASE, OMAP5912_SRAM_START, OMAP5912_SRAM_SIZE + 0x800, MT_DEVICE }
}; };
#endif #endif
...@@ -77,6 +135,7 @@ static void __init _omap_map_io(void) ...@@ -77,6 +135,7 @@ static void __init _omap_map_io(void)
/* We have to initialize the IO space mapping before we can run /* We have to initialize the IO space mapping before we can run
* cpu_is_omapxxx() macros. */ * cpu_is_omapxxx() macros. */
iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc)); iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
omap_check_revision();
#ifdef CONFIG_ARCH_OMAP730 #ifdef CONFIG_ARCH_OMAP730
if (cpu_is_omap730()) { if (cpu_is_omap730()) {
...@@ -102,8 +161,8 @@ static void __init _omap_map_io(void) ...@@ -102,8 +161,8 @@ static void __init _omap_map_io(void)
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge". * on a Posted Write in the TIPB Bridge".
*/ */
omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL_REG); omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL);
omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL_REG); omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL);
/* Must init clocks early to assure that timer interrupt works /* Must init clocks early to assure that timer interrupt works
*/ */
......
This diff is collapsed.
...@@ -46,11 +46,11 @@ static void fpga_mask_irq(unsigned int irq) ...@@ -46,11 +46,11 @@ static void fpga_mask_irq(unsigned int irq)
irq -= IH_FPGA_BASE; irq -= IH_FPGA_BASE;
if (irq < 8) if (irq < 8)
__raw_writeb((__raw_readb(OMAP1510P1_FPGA_IMR_LO) __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO)
& ~(1 << irq)), OMAP1510P1_FPGA_IMR_LO); & ~(1 << irq)), OMAP1510_FPGA_IMR_LO);
else if (irq < 16) else if (irq < 16)
__raw_writeb((__raw_readb(OMAP1510P1_FPGA_IMR_HI) __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
& ~(1 << (irq - 8))), OMAP1510P1_FPGA_IMR_HI); & ~(1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
else else
__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2) __raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
& ~(1 << (irq - 16))), INNOVATOR_FPGA_IMR2); & ~(1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
...@@ -60,10 +60,10 @@ static void fpga_mask_irq(unsigned int irq) ...@@ -60,10 +60,10 @@ static void fpga_mask_irq(unsigned int irq)
static inline u32 get_fpga_unmasked_irqs(void) static inline u32 get_fpga_unmasked_irqs(void)
{ {
return return
((__raw_readb(OMAP1510P1_FPGA_ISR_LO) & ((__raw_readb(OMAP1510_FPGA_ISR_LO) &
__raw_readb(OMAP1510P1_FPGA_IMR_LO))) | __raw_readb(OMAP1510_FPGA_IMR_LO))) |
((__raw_readb(OMAP1510P1_FPGA_ISR_HI) & ((__raw_readb(OMAP1510_FPGA_ISR_HI) &
__raw_readb(OMAP1510P1_FPGA_IMR_HI)) << 8) | __raw_readb(OMAP1510_FPGA_IMR_HI)) << 8) |
((__raw_readb(INNOVATOR_FPGA_ISR2) & ((__raw_readb(INNOVATOR_FPGA_ISR2) &
__raw_readb(INNOVATOR_FPGA_IMR2)) << 16); __raw_readb(INNOVATOR_FPGA_IMR2)) << 16);
} }
...@@ -79,11 +79,11 @@ static void fpga_unmask_irq(unsigned int irq) ...@@ -79,11 +79,11 @@ static void fpga_unmask_irq(unsigned int irq)
irq -= IH_FPGA_BASE; irq -= IH_FPGA_BASE;
if (irq < 8) if (irq < 8)
__raw_writeb((__raw_readb(OMAP1510P1_FPGA_IMR_LO) | (1 << irq)), __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) | (1 << irq)),
OMAP1510P1_FPGA_IMR_LO); OMAP1510_FPGA_IMR_LO);
else if (irq < 16) else if (irq < 16)
__raw_writeb((__raw_readb(OMAP1510P1_FPGA_IMR_HI) __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
| (1 << (irq - 8))), OMAP1510P1_FPGA_IMR_HI); | (1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
else else
__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2) __raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
| (1 << (irq - 16))), INNOVATOR_FPGA_IMR2); | (1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
...@@ -166,8 +166,8 @@ void fpga_init_irq(void) ...@@ -166,8 +166,8 @@ void fpga_init_irq(void)
{ {
int i; int i;
__raw_writeb(0, OMAP1510P1_FPGA_IMR_LO); __raw_writeb(0, OMAP1510_FPGA_IMR_LO);
__raw_writeb(0, OMAP1510P1_FPGA_IMR_HI); __raw_writeb(0, OMAP1510_FPGA_IMR_HI);
__raw_writeb(0, INNOVATOR_FPGA_IMR2); __raw_writeb(0, INNOVATOR_FPGA_IMR2);
for (i = IH_FPGA_BASE; i < (IH_FPGA_BASE + NR_FPGA_IRQS); i++) { for (i = IH_FPGA_BASE; i < (IH_FPGA_BASE + NR_FPGA_IRQS); i++) {
......
...@@ -22,7 +22,6 @@ ...@@ -22,7 +22,6 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/arch/irqs.h> #include <asm/arch/irqs.h>
#include <asm/arch/gpio.h> #include <asm/arch/gpio.h>
#include <asm/arch/pm.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/io.h> #include <asm/io.h>
...@@ -213,12 +212,12 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) ...@@ -213,12 +212,12 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
reg += OMAP730_GPIO_DIR_CONTROL; reg += OMAP730_GPIO_DIR_CONTROL;
break; break;
} }
l = omap_readl(reg); l = __raw_readl(reg);
if (is_input) if (is_input)
l |= 1 << gpio; l |= 1 << gpio;
else else
l &= ~(1 << gpio); l &= ~(1 << gpio);
omap_writel(l, reg); __raw_writel(l, reg);
} }
void omap_set_gpio_direction(int gpio, int is_input) void omap_set_gpio_direction(int gpio, int is_input)
...@@ -240,8 +239,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) ...@@ -240,8 +239,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
switch (bank->method) { switch (bank->method) {
case METHOD_MPUIO: case METHOD_MPUIO:
reg += OMAP_MPUIO_OUTPUT_REG; reg += OMAP_MPUIO_OUTPUT;
l = omap_readl(reg); l = __raw_readl(reg);
if (enable) if (enable)
l |= 1 << gpio; l |= 1 << gpio;
else else
...@@ -249,7 +248,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) ...@@ -249,7 +248,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
break; break;
case METHOD_GPIO_1510: case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_DATA_OUTPUT; reg += OMAP1510_GPIO_DATA_OUTPUT;
l = omap_readl(reg); l = __raw_readl(reg);
if (enable) if (enable)
l |= 1 << gpio; l |= 1 << gpio;
else else
...@@ -264,7 +263,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) ...@@ -264,7 +263,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
break; break;
case METHOD_GPIO_730: case METHOD_GPIO_730:
reg += OMAP730_GPIO_DATA_OUTPUT; reg += OMAP730_GPIO_DATA_OUTPUT;
l = omap_readl(reg); l = __raw_readl(reg);
if (enable) if (enable)
l |= 1 << gpio; l |= 1 << gpio;
else else
...@@ -274,7 +273,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) ...@@ -274,7 +273,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
BUG(); BUG();
return; return;
} }
omap_writel(l, reg); __raw_writel(l, reg);
} }
void omap_set_gpio_dataout(int gpio, int enable) void omap_set_gpio_dataout(int gpio, int enable)
...@@ -312,7 +311,7 @@ int omap_get_gpio_datain(int gpio) ...@@ -312,7 +311,7 @@ int omap_get_gpio_datain(int gpio)
BUG(); BUG();
return -1; return -1;
} }
return (omap_readl(reg) & (1 << get_gpio_index(gpio))) != 0; return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
} }
static void _set_gpio_edge_ctrl(struct gpio_bank *bank, int gpio, int edge) static void _set_gpio_edge_ctrl(struct gpio_bank *bank, int gpio, int edge)
...@@ -322,22 +321,22 @@ static void _set_gpio_edge_ctrl(struct gpio_bank *bank, int gpio, int edge) ...@@ -322,22 +321,22 @@ static void _set_gpio_edge_ctrl(struct gpio_bank *bank, int gpio, int edge)
switch (bank->method) { switch (bank->method) {
case METHOD_MPUIO: case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE_REG; reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = omap_readl(reg); l = __raw_readl(reg);
if (edge == OMAP_GPIO_RISING_EDGE) if (edge == OMAP_GPIO_RISING_EDGE)
l |= 1 << gpio; l |= 1 << gpio;
else else
l &= ~(1 << gpio); l &= ~(1 << gpio);
omap_writel(l, reg); __raw_writel(l, reg);
break; break;
case METHOD_GPIO_1510: case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL; reg += OMAP1510_GPIO_INT_CONTROL;
l = omap_readl(reg); l = __raw_readl(reg);
if (edge == OMAP_GPIO_RISING_EDGE) if (edge == OMAP_GPIO_RISING_EDGE)
l |= 1 << gpio; l |= 1 << gpio;
else else
l &= ~(1 << gpio); l &= ~(1 << gpio);
omap_writel(l, reg); __raw_writel(l, reg);
break; break;
case METHOD_GPIO_1610: case METHOD_GPIO_1610:
edge &= 0x03; edge &= 0x03;
...@@ -346,19 +345,19 @@ static void _set_gpio_edge_ctrl(struct gpio_bank *bank, int gpio, int edge) ...@@ -346,19 +345,19 @@ static void _set_gpio_edge_ctrl(struct gpio_bank *bank, int gpio, int edge)
else else
reg += OMAP1610_GPIO_EDGE_CTRL1; reg += OMAP1610_GPIO_EDGE_CTRL1;
gpio &= 0x07; gpio &= 0x07;
l = omap_readl(reg); l = __raw_readl(reg);
l &= ~(3 << (gpio << 1)); l &= ~(3 << (gpio << 1));
l |= edge << (gpio << 1); l |= edge << (gpio << 1);
omap_writel(l, reg); __raw_writel(l, reg);
break; break;
case METHOD_GPIO_730: case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_CONTROL; reg += OMAP730_GPIO_INT_CONTROL;
l = omap_readl(reg); l = __raw_readl(reg);
if (edge == OMAP_GPIO_RISING_EDGE) if (edge == OMAP_GPIO_RISING_EDGE)
l |= 1 << gpio; l |= 1 << gpio;
else else
l &= ~(1 << gpio); l &= ~(1 << gpio);
omap_writel(l, reg); __raw_writel(l, reg);
break; break;
default: default:
BUG(); BUG();
...@@ -385,11 +384,11 @@ static int _get_gpio_edge_ctrl(struct gpio_bank *bank, int gpio) ...@@ -385,11 +384,11 @@ static int _get_gpio_edge_ctrl(struct gpio_bank *bank, int gpio)
switch (bank->method) { switch (bank->method) {
case METHOD_MPUIO: case METHOD_MPUIO:
l = omap_readl(reg + OMAP_MPUIO_GPIO_INT_EDGE_REG); l = __raw_readl(reg + OMAP_MPUIO_GPIO_INT_EDGE);
return (l & (1 << gpio)) ? return (l & (1 << gpio)) ?
OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE;
case METHOD_GPIO_1510: case METHOD_GPIO_1510:
l = omap_readl(reg + OMAP1510_GPIO_INT_CONTROL); l = __raw_readl(reg + OMAP1510_GPIO_INT_CONTROL);
return (l & (1 << gpio)) ? return (l & (1 << gpio)) ?
OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE;
case METHOD_GPIO_1610: case METHOD_GPIO_1610:
...@@ -397,9 +396,9 @@ static int _get_gpio_edge_ctrl(struct gpio_bank *bank, int gpio) ...@@ -397,9 +396,9 @@ static int _get_gpio_edge_ctrl(struct gpio_bank *bank, int gpio)
reg += OMAP1610_GPIO_EDGE_CTRL2; reg += OMAP1610_GPIO_EDGE_CTRL2;
else else
reg += OMAP1610_GPIO_EDGE_CTRL1; reg += OMAP1610_GPIO_EDGE_CTRL1;
return (omap_readl(reg) >> ((gpio & 0x07) << 1)) & 0x03; return (__raw_readl(reg) >> ((gpio & 0x07) << 1)) & 0x03;
case METHOD_GPIO_730: case METHOD_GPIO_730:
l = omap_readl(reg + OMAP730_GPIO_INT_CONTROL); l = __raw_readl(reg + OMAP730_GPIO_INT_CONTROL);
return (l & (1 << gpio)) ? return (l & (1 << gpio)) ?
OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE;
default: default:
...@@ -430,7 +429,7 @@ static void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) ...@@ -430,7 +429,7 @@ static void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
BUG(); BUG();
return; return;
} }
omap_writel(1 << get_gpio_index(gpio), reg); __raw_writel(1 << get_gpio_index(gpio), reg);
} }
static void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) static void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
...@@ -441,7 +440,7 @@ static void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) ...@@ -441,7 +440,7 @@ static void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
switch (bank->method) { switch (bank->method) {
case METHOD_MPUIO: case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_MASKIT; reg += OMAP_MPUIO_GPIO_MASKIT;
l = omap_readl(reg); l = __raw_readl(reg);
if (enable) if (enable)
l &= ~(1 << gpio); l &= ~(1 << gpio);
else else
...@@ -449,7 +448,7 @@ static void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) ...@@ -449,7 +448,7 @@ static void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
break; break;
case METHOD_GPIO_1510: case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_MASK; reg += OMAP1510_GPIO_INT_MASK;
l = omap_readl(reg); l = __raw_readl(reg);
if (enable) if (enable)
l &= ~(1 << gpio); l &= ~(1 << gpio);
else else
...@@ -465,7 +464,7 @@ static void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) ...@@ -465,7 +464,7 @@ static void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
break; break;
case METHOD_GPIO_730: case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_MASK; reg += OMAP730_GPIO_INT_MASK;
l = omap_readl(reg); l = __raw_readl(reg);
if (enable) if (enable)
l &= ~(1 << gpio); l &= ~(1 << gpio);
else else
...@@ -475,7 +474,7 @@ static void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) ...@@ -475,7 +474,7 @@ static void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
BUG(); BUG();
return; return;
} }
omap_writel(l, reg); __raw_writel(l, reg);
} }
int omap_request_gpio(int gpio) int omap_request_gpio(int gpio)
...@@ -500,7 +499,7 @@ int omap_request_gpio(int gpio) ...@@ -500,7 +499,7 @@ int omap_request_gpio(int gpio)
/* Claim the pin for the ARM */ /* Claim the pin for the ARM */
reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
omap_writel(omap_readl(reg) | (1 << get_gpio_index(gpio)), reg); __raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg);
} }
#endif #endif
spin_unlock(&bank->lock); spin_unlock(&bank->lock);
...@@ -564,7 +563,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, ...@@ -564,7 +563,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
#endif #endif
for (;;) { for (;;) {
u32 isr = omap_readl(isr_reg); u32 isr = __raw_readl(isr_reg);
unsigned int gpio_irq; unsigned int gpio_irq;
if (!isr) if (!isr)
...@@ -587,15 +586,15 @@ static void gpio_ack_irq(unsigned int irq) ...@@ -587,15 +586,15 @@ static void gpio_ack_irq(unsigned int irq)
#ifdef CONFIG_ARCH_OMAP1510 #ifdef CONFIG_ARCH_OMAP1510
if (bank->method == METHOD_GPIO_1510) if (bank->method == METHOD_GPIO_1510)
omap_writew(1 << (gpio & 0x0f), bank->base + OMAP1510_GPIO_INT_STATUS); __raw_writew(1 << (gpio & 0x0f), bank->base + OMAP1510_GPIO_INT_STATUS);
#endif #endif
#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP5912) #if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP5912)
if (bank->method == METHOD_GPIO_1610) if (bank->method == METHOD_GPIO_1610)
omap_writew(1 << (gpio & 0x0f), bank->base + OMAP1610_GPIO_IRQSTATUS1); __raw_writew(1 << (gpio & 0x0f), bank->base + OMAP1610_GPIO_IRQSTATUS1);
#endif #endif
#ifdef CONFIG_ARCH_OMAP730 #ifdef CONFIG_ARCH_OMAP730
if (bank->method == METHOD_GPIO_730) if (bank->method == METHOD_GPIO_730)
omap_writel(1 << (gpio & 0x1f), bank->base + OMAP730_GPIO_INT_STATUS); __raw_writel(1 << (gpio & 0x1f), bank->base + OMAP730_GPIO_INT_STATUS);
#endif #endif
} }
...@@ -692,26 +691,27 @@ static int __init _omap_gpio_init(void) ...@@ -692,26 +691,27 @@ static int __init _omap_gpio_init(void)
bank = &gpio_bank[i]; bank = &gpio_bank[i];
bank->reserved_map = 0; bank->reserved_map = 0;
bank->base = IO_ADDRESS(bank->base);
spin_lock_init(&bank->lock); spin_lock_init(&bank->lock);
if (bank->method == METHOD_MPUIO) { if (bank->method == METHOD_MPUIO) {
omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT); omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT);
} }
#ifdef CONFIG_ARCH_OMAP1510 #ifdef CONFIG_ARCH_OMAP1510
if (bank->method == METHOD_GPIO_1510) { if (bank->method == METHOD_GPIO_1510) {
omap_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
omap_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS); __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS);
} }
#endif #endif
#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP5912) #if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP5912)
if (bank->method == METHOD_GPIO_1610) { if (bank->method == METHOD_GPIO_1610) {
omap_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1); __raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1);
omap_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
} }
#endif #endif
#ifdef CONFIG_ARCH_OMAP730 #ifdef CONFIG_ARCH_OMAP730
if (bank->method == METHOD_GPIO_730) { if (bank->method == METHOD_GPIO_730) {
omap_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK); __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
omap_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS); __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
gpio_count = 32; /* 730 has 32-bit GPIOs */ gpio_count = 32; /* 730 has 32-bit GPIOs */
} }
...@@ -730,9 +730,9 @@ static int __init _omap_gpio_init(void) ...@@ -730,9 +730,9 @@ static int __init _omap_gpio_init(void)
} }
/* Enable system clock for GPIO module. /* Enable system clock for GPIO module.
* The CAM_CLK_CTRL_REG *is* really the right place. */ * The CAM_CLK_CTRL *is* really the right place. */
if (cpu_is_omap1610()) if (cpu_is_omap1610())
omap_writel(omap_readl(ULPD_CAM_CLK_CTRL_REG) | 0x04, ULPD_CAM_CLK_CTRL_REG); omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL);
return 0; return 0;
} }
...@@ -748,8 +748,11 @@ int omap_gpio_init(void) ...@@ -748,8 +748,11 @@ int omap_gpio_init(void)
return 0; return 0;
} }
EXPORT_SYMBOL(omap_gpio_init);
EXPORT_SYMBOL(omap_request_gpio); EXPORT_SYMBOL(omap_request_gpio);
EXPORT_SYMBOL(omap_free_gpio); EXPORT_SYMBOL(omap_free_gpio);
EXPORT_SYMBOL(omap_set_gpio_direction);
EXPORT_SYMBOL(omap_set_gpio_dataout);
EXPORT_SYMBOL(omap_get_gpio_datain);
EXPORT_SYMBOL(omap_set_gpio_edge_ctrl);
arch_initcall(omap_gpio_init); arch_initcall(omap_gpio_init);
...@@ -74,9 +74,9 @@ static inline void irq_bank_writel(unsigned long value, int bank, int offset) ...@@ -74,9 +74,9 @@ static inline void irq_bank_writel(unsigned long value, int bank, int offset)
static void omap_ack_irq(unsigned int irq) static void omap_ack_irq(unsigned int irq)
{ {
if (irq > 31) if (irq > 31)
omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG); omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET);
omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG); omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET);
} }
static void omap_mask_irq(unsigned int irq) static void omap_mask_irq(unsigned int irq)
...@@ -84,9 +84,9 @@ static void omap_mask_irq(unsigned int irq) ...@@ -84,9 +84,9 @@ static void omap_mask_irq(unsigned int irq)
int bank = IRQ_BANK(irq); int bank = IRQ_BANK(irq);
u32 l; u32 l;
l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR); l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
l |= 1 << IRQ_BIT(irq); l |= 1 << IRQ_BIT(irq);
omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR); omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
} }
static void omap_unmask_irq(unsigned int irq) static void omap_unmask_irq(unsigned int irq)
...@@ -94,9 +94,9 @@ static void omap_unmask_irq(unsigned int irq) ...@@ -94,9 +94,9 @@ static void omap_unmask_irq(unsigned int irq)
int bank = IRQ_BANK(irq); int bank = IRQ_BANK(irq);
u32 l; u32 l;
l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR); l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
l &= ~(1 << IRQ_BIT(irq)); l &= ~(1 << IRQ_BIT(irq));
omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR); omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
} }
static void omap_mask_ack_irq(unsigned int irq) static void omap_mask_ack_irq(unsigned int irq)
...@@ -121,7 +121,7 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) ...@@ -121,7 +121,7 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
/* FIQ is only available on bank 0 interrupts */ /* FIQ is only available on bank 0 interrupts */
fiq = bank ? 0 : (fiq & 0x1); fiq = bank ? 0 : (fiq & 0x1);
val = fiq | ((priority & 0x1f) << 2) | ((trigger & 0x1) << 1); val = fiq | ((priority & 0x1f) << 2) | ((trigger & 0x1) << 1);
offset = IRQ_ILR0 + IRQ_BIT(irq) * 0x4; offset = IRQ_ILR0_REG_OFFSET + IRQ_BIT(irq) * 0x4;
irq_bank_writel(val, bank, offset); irq_bank_writel(val, bank, offset);
} }
...@@ -182,13 +182,13 @@ void __init omap_init_irq(void) ...@@ -182,13 +182,13 @@ void __init omap_init_irq(void)
/* Mask and clear all interrupts */ /* Mask and clear all interrupts */
for (i = 0; i < irq_bank_count; i++) { for (i = 0; i < irq_bank_count; i++) {
irq_bank_writel(~0x0, i, IRQ_MIR); irq_bank_writel(~0x0, i, IRQ_MIR_REG_OFFSET);
irq_bank_writel(0x0, i, IRQ_ITR); irq_bank_writel(0x0, i, IRQ_ITR_REG_OFFSET);
} }
/* Clear any pending interrupts */ /* Clear any pending interrupts */
irq_bank_writel(0x03, 0, IRQ_CONTROL_REG); irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET);
irq_bank_writel(0x03, 1, IRQ_CONTROL_REG); irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
/* Install the interrupt handlers for each bank */ /* Install the interrupt handlers for each bank */
for (i = 0; i < irq_bank_count; i++) { for (i = 0; i < irq_bank_count; i++) {
......
...@@ -85,14 +85,6 @@ int ocpi_enable(void) ...@@ -85,14 +85,6 @@ int ocpi_enable(void)
val &= ~0xff; val &= ~0xff;
omap_writel(val, OCPI_SEC); omap_writel(val, OCPI_SEC);
val = omap_readl(OCPI_SEC);
val |= 0;
omap_writel(val, OCPI_SEC);
val = omap_readl(OCPI_SINT0);
val |= 0;
omap_writel(val, OCPI_SINT1);
return 0; return 0;
} }
EXPORT_SYMBOL(ocpi_enable); EXPORT_SYMBOL(ocpi_enable);
......
if ARCH_PXA
menu "Intel PXA2xx Implementations" menu "Intel PXA2xx Implementations"
choice choice
prompt "Select target board" prompt "Select target board"
depends on ARCH_PXA
config ARCH_LUBBOCK config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform" bool "Intel DBPXA250 Development Platform"
...@@ -32,3 +32,4 @@ config PXA27x ...@@ -32,3 +32,4 @@ config PXA27x
help help
Select code specific to PXA27x variants Select code specific to PXA27x variants
endif
if ARCH_S3C2410
menu "S3C2410 Implementations" menu "S3C2410 Implementations"
config ARCH_BAST config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)" bool "Simtec Electronics BAST (EB2410ITX)"
depends on ARCH_S3C2410
help help
Say Y here if you are using the Simtec Electronics EB2410ITX Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST) development board (also known as BAST)
...@@ -11,22 +12,21 @@ config ARCH_BAST ...@@ -11,22 +12,21 @@ config ARCH_BAST
config ARCH_H1940 config ARCH_H1940
bool "IPAQ H1940" bool "IPAQ H1940"
depends on ARCH_S3C2410
help help
Say Y here if you are using the HP IPAQ H1940 Say Y here if you are using the HP IPAQ H1940
<http://www.handhelds.org/projects/h1940.html>. <http://www.handhelds.org/projects/h1940.html>.
config ARCH_SMDK2410 config ARCH_SMDK2410
bool "SMDK2410/A9M2410" bool "SMDK2410/A9M2410"
depends on ARCH_S3C2410
help help
Say Y here if you are using the SMDK2410 or the derived module A9M2410 Say Y here if you are using the SMDK2410 or the derived module A9M2410
<http://www.fsforth.de> <http://www.fsforth.de>
config MACH_VR1000 config MACH_VR1000
bool "Simtec VR1000" bool "Simtec VR1000"
depends on ARCH_S3C2410
help help
Say Y here if you are using the Simtec VR1000 board. Say Y here if you are using the Simtec VR1000 board.
endmenu endmenu
endif
if ARCH_SA1100
menu "SA11x0 Implementations" menu "SA11x0 Implementations"
config SA1100_ASSABET config SA1100_ASSABET
bool "Assabet" bool "Assabet"
depends on ARCH_SA1100
help help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (also known as the Assabet). Microprocessor Development Board (also known as the Assabet).
...@@ -18,7 +18,6 @@ config ASSABET_NEPONSET ...@@ -18,7 +18,6 @@ config ASSABET_NEPONSET
config SA1100_ADSBITSY config SA1100_ADSBITSY
bool "ADS Bitsy" bool "ADS Bitsy"
depends on ARCH_SA1100
help help
Say Y here if you are using Applied Data Systems Intel(R) Say Y here if you are using Applied Data Systems Intel(R)
StrongARM(R) 1110 based Bitsy, 3 x 5 inches in size, Compaq - IPAQ - StrongARM(R) 1110 based Bitsy, 3 x 5 inches in size, Compaq - IPAQ -
...@@ -28,14 +27,12 @@ config SA1100_ADSBITSY ...@@ -28,14 +27,12 @@ config SA1100_ADSBITSY
config SA1100_BRUTUS config SA1100_BRUTUS
bool "Brutus" bool "Brutus"
depends on ARCH_SA1100
help help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1100 Say Y here if you are using the Intel(R) StrongARM(R) SA-1100
Microprocessor Development Board (also known as the Brutus). Microprocessor Development Board (also known as the Brutus).
config SA1100_CERF config SA1100_CERF
bool "CerfBoard" bool "CerfBoard"
depends on ARCH_SA1100
help help
The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
More information is available at: More information is available at:
...@@ -62,7 +59,6 @@ endchoice ...@@ -62,7 +59,6 @@ endchoice
config SA1100_H3100 config SA1100_H3100
bool "Compaq iPAQ H3100" bool "Compaq iPAQ H3100"
depends on ARCH_SA1100
help help
Say Y here if you intend to run this kernel on the Compaq iPAQ Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the H3100 handheld computer. Information about this machine and the
...@@ -73,7 +69,6 @@ config SA1100_H3100 ...@@ -73,7 +69,6 @@ config SA1100_H3100
config SA1100_H3600 config SA1100_H3600
bool "Compaq iPAQ H3600/H3700" bool "Compaq iPAQ H3600/H3700"
depends on ARCH_SA1100
help help
Say Y here if you intend to run this kernel on the Compaq iPAQ Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the H3600 handheld computer. Information about this machine and the
...@@ -84,7 +79,6 @@ config SA1100_H3600 ...@@ -84,7 +79,6 @@ config SA1100_H3600
config SA1100_H3800 config SA1100_H3800
bool "Compaq iPAQ H3800" bool "Compaq iPAQ H3800"
depends on ARCH_SA1100
help help
Say Y here if you intend to run this kernel on the Compaq iPAQ H3800 Say Y here if you intend to run this kernel on the Compaq iPAQ H3800
series handheld computer. Information about this machine and the series handheld computer. Information about this machine and the
...@@ -102,7 +96,6 @@ config SA1100_H3XXX ...@@ -102,7 +96,6 @@ config SA1100_H3XXX
#dep_bool ' Empeg' CONFIG_SA1100_EMPEG $CONFIG_ARCH_SA1100 #dep_bool ' Empeg' CONFIG_SA1100_EMPEG $CONFIG_ARCH_SA1100
config SA1100_EXTENEX1 config SA1100_EXTENEX1
bool "Extenex HandHeld Theater (Squashtail)" bool "Extenex HandHeld Theater (Squashtail)"
depends on ARCH_SA1100
config SA1100_EXTENEX1_16MB config SA1100_EXTENEX1_16MB
bool "Support 16 MB of DRAM (not just 8)" bool "Support 16 MB of DRAM (not just 8)"
...@@ -110,7 +103,6 @@ config SA1100_EXTENEX1_16MB ...@@ -110,7 +103,6 @@ config SA1100_EXTENEX1_16MB
config SA1100_FLEXANET config SA1100_FLEXANET
bool "FlexaNet" bool "FlexaNet"
depends on ARCH_SA1100
help help
Say Y here if you intend to run this kernel on the FlexaNet Say Y here if you intend to run this kernel on the FlexaNet
handheld instruments. Information about this machine can be handheld instruments. Information about this machine can be
...@@ -118,14 +110,12 @@ config SA1100_FLEXANET ...@@ -118,14 +110,12 @@ config SA1100_FLEXANET
config SA1100_FREEBIRD config SA1100_FREEBIRD
bool "FreeBird-v1.1" bool "FreeBird-v1.1"
depends on ARCH_SA1100
help help
Support the FreeBird board used in Coventive embedded products. See Support the FreeBird board used in Coventive embedded products. See
Documentation/arm/SA1100/Freebird for more. Documentation/arm/SA1100/Freebird for more.
config SA1100_GRAPHICSCLIENT config SA1100_GRAPHICSCLIENT
bool "GraphicsClient Plus" bool "GraphicsClient Plus"
depends on ARCH_SA1100
help help
Say Y here if you are using an Applied Data Systems Intel(R) Say Y here if you are using an Applied Data Systems Intel(R)
StrongARM(R) SA-1100 based Graphics Client SBC. See StrongARM(R) SA-1100 based Graphics Client SBC. See
...@@ -133,7 +123,6 @@ config SA1100_GRAPHICSCLIENT ...@@ -133,7 +123,6 @@ config SA1100_GRAPHICSCLIENT
config SA1100_GRAPHICSMASTER config SA1100_GRAPHICSMASTER
bool "GraphicsMaster" bool "GraphicsMaster"
depends on ARCH_SA1100
help help
Say Y here if you are using an Applied Data Systems Intel(R) Say Y here if you are using an Applied Data Systems Intel(R)
StrongARM(R) SA-1100 based Graphics Master SBC with SA-1111 StrongARM(R) SA-1100 based Graphics Master SBC with SA-1111
...@@ -143,14 +132,12 @@ config SA1100_GRAPHICSMASTER ...@@ -143,14 +132,12 @@ config SA1100_GRAPHICSMASTER
config SA1100_BADGE4 config SA1100_BADGE4
bool "HP Labs BadgePAD 4" bool "HP Labs BadgePAD 4"
depends on ARCH_SA1100
help help
Say Y here if you want to build a kernel for the HP Laboratories Say Y here if you want to build a kernel for the HP Laboratories
BadgePAD 4. BadgePAD 4.
config SA1100_JORNADA720 config SA1100_JORNADA720
bool "HP Jornada 720" bool "HP Jornada 720"
depends on ARCH_SA1100
help help
Say Y here if you want to build a kernel for the HP Jornada 720 Say Y here if you want to build a kernel for the HP Jornada 720
handheld computer. See <http://www.hp.com/jornada/products/720> handheld computer. See <http://www.hp.com/jornada/products/720>
...@@ -158,14 +145,12 @@ config SA1100_JORNADA720 ...@@ -158,14 +145,12 @@ config SA1100_JORNADA720
config SA1100_HACKKIT config SA1100_HACKKIT
bool "HackKit Core CPU Board" bool "HackKit Core CPU Board"
depends on ARCH_SA1100
help help
Say Y here to support the HackKit Core CPU Board Say Y here to support the HackKit Core CPU Board
<http://hackkit.eletztrick.de>; <http://hackkit.eletztrick.de>;
config SA1100_HUW_WEBPANEL config SA1100_HUW_WEBPANEL
bool "HuW WebPanel" bool "HuW WebPanel"
depends on ARCH_SA1100
help help
Say Y here to support the HuW Webpanel produced by Hoeft & Wessel Say Y here to support the HuW Webpanel produced by Hoeft & Wessel
AG. English-language website is at AG. English-language website is at
...@@ -174,7 +159,6 @@ config SA1100_HUW_WEBPANEL ...@@ -174,7 +159,6 @@ config SA1100_HUW_WEBPANEL
config SA1100_ITSY config SA1100_ITSY
bool "Itsy" bool "Itsy"
depends on ARCH_SA1100
help help
Say Y here if you are using the Compaq Itsy experimental pocket Say Y here if you are using the Compaq Itsy experimental pocket
computer. See <http://research.compaq.com/wrl/projects/itsy/> for computer. See <http://research.compaq.com/wrl/projects/itsy/> for
...@@ -182,7 +166,6 @@ config SA1100_ITSY ...@@ -182,7 +166,6 @@ config SA1100_ITSY
config SA1100_LART config SA1100_LART
bool "LART" bool "LART"
depends on ARCH_SA1100
help help
Say Y here if you are using the Linux Advanced Radio Terminal Say Y here if you are using the Linux Advanced Radio Terminal
(also known as the LART). See <http://www.lart.tudelft.nl/> for (also known as the LART). See <http://www.lart.tudelft.nl/> for
...@@ -190,7 +173,6 @@ config SA1100_LART ...@@ -190,7 +173,6 @@ config SA1100_LART
config SA1100_NANOENGINE config SA1100_NANOENGINE
bool "nanoEngine" bool "nanoEngine"
depends on ARCH_SA1100
help help
The nanoEngine is a StrongARM 1110-based single board computer The nanoEngine is a StrongARM 1110-based single board computer
from Bright Star Engineering. More information is available at: from Bright Star Engineering. More information is available at:
...@@ -201,14 +183,12 @@ config SA1100_NANOENGINE ...@@ -201,14 +183,12 @@ config SA1100_NANOENGINE
config SA1100_OMNIMETER config SA1100_OMNIMETER
bool "OmniMeter" bool "OmniMeter"
depends on ARCH_SA1100
help help
Say Y here if you are using the inhand electronics OmniMeter. See Say Y here if you are using the inhand electronics OmniMeter. See
<http://www.inhandelectronics.com/omnimeter.asp> for details. <http://www.inhandelectronics.com/omnimeter.asp> for details.
config SA1100_PANGOLIN config SA1100_PANGOLIN
bool "Pangolin" bool "Pangolin"
depends on ARCH_SA1100
help help
Pangolin is a StrongARM 1110-based evaluation platform produced Pangolin is a StrongARM 1110-based evaluation platform produced
by Dialogue Technology. It has EISA slots for ease of configuration by Dialogue Technology. It has EISA slots for ease of configuration
...@@ -220,7 +200,6 @@ config SA1100_PANGOLIN ...@@ -220,7 +200,6 @@ config SA1100_PANGOLIN
config SA1100_PLEB config SA1100_PLEB
bool "PLEB" bool "PLEB"
depends on ARCH_SA1100
help help
Say Y here if you are using a Portable Linux Embedded Board Say Y here if you are using a Portable Linux Embedded Board
(also known as PLEB). See <http://www.cse.unsw.edu.au/~pleb/> (also known as PLEB). See <http://www.cse.unsw.edu.au/~pleb/>
...@@ -228,7 +207,6 @@ config SA1100_PLEB ...@@ -228,7 +207,6 @@ config SA1100_PLEB
config SA1100_PT_SYSTEM3 config SA1100_PT_SYSTEM3
bool "PT System 3" bool "PT System 3"
depends on ARCH_SA1100
help help
Say Y here if you intend to build a kernel suitable to run on Say Y here if you intend to build a kernel suitable to run on
a Pruftechnik Digital Board. For more information see a Pruftechnik Digital Board. For more information see
...@@ -236,7 +214,6 @@ config SA1100_PT_SYSTEM3 ...@@ -236,7 +214,6 @@ config SA1100_PT_SYSTEM3
config SA1100_SHANNON config SA1100_SHANNON
bool "Shannon" bool "Shannon"
depends on ARCH_SA1100
help help
The Shannon (also known as a Tuxscreen, and also as a IS2630) was a The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
limited edition webphone produced by Philips. The Shannon is a SA1100 limited edition webphone produced by Philips. The Shannon is a SA1100
...@@ -245,7 +222,6 @@ config SA1100_SHANNON ...@@ -245,7 +222,6 @@ config SA1100_SHANNON
config SA1100_SHERMAN config SA1100_SHERMAN
bool "Sherman" bool "Sherman"
depends on ARCH_SA1100
help help
Say Y here to support the Blazie Engineering `Sherman' StrongARM Say Y here to support the Blazie Engineering `Sherman' StrongARM
1110-based SBC, used primarily in assistance products for the 1110-based SBC, used primarily in assistance products for the
...@@ -255,7 +231,6 @@ config SA1100_SHERMAN ...@@ -255,7 +231,6 @@ config SA1100_SHERMAN
config SA1100_SIMPAD config SA1100_SIMPAD
bool "Simpad" bool "Simpad"
depends on ARCH_SA1100
help help
The SIEMENS webpad SIMpad is based on the StrongARM 1110. There The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
...@@ -266,7 +241,6 @@ config SA1100_SIMPAD ...@@ -266,7 +241,6 @@ config SA1100_SIMPAD
config SA1100_PFS168 config SA1100_PFS168
bool "Tulsa" bool "Tulsa"
depends on ARCH_SA1100
help help
The Radisys Corp. PFS-168 (aka Tulsa) is an Intel® StrongArm® SA-1110 based The Radisys Corp. PFS-168 (aka Tulsa) is an Intel® StrongArm® SA-1110 based
computer which includes the SA-1111 Microprocessor Companion Chip and other computer which includes the SA-1111 Microprocessor Companion Chip and other
...@@ -276,7 +250,6 @@ config SA1100_PFS168 ...@@ -276,7 +250,6 @@ config SA1100_PFS168
config SA1100_VICTOR config SA1100_VICTOR
bool "Victor" bool "Victor"
depends on ARCH_SA1100
help help
Say Y here if you are using a Visu Aide Intel(R) StrongARM(R) Say Y here if you are using a Visu Aide Intel(R) StrongARM(R)
SA-1100 based Victor Digital Talking Book Reader. See SA-1100 based Victor Digital Talking Book Reader. See
...@@ -285,14 +258,12 @@ config SA1100_VICTOR ...@@ -285,14 +258,12 @@ config SA1100_VICTOR
config SA1100_XP860 config SA1100_XP860
bool "XP860" bool "XP860"
depends on ARCH_SA1100
help help
:: Config help missing :: :: Config help missing ::
:: 06 August 2002 :: :: 06 August 2002 ::
config SA1100_YOPY config SA1100_YOPY
bool "Yopy" bool "Yopy"
depends on ARCH_SA1100
help help
Say Y here to support the Yopy PDA. Product information at Say Y here to support the Yopy PDA. Product information at
<http://www.yopy.com/>. See Documentation/arm/SA1100/Yopy <http://www.yopy.com/>. See Documentation/arm/SA1100/Yopy
...@@ -300,14 +271,12 @@ config SA1100_YOPY ...@@ -300,14 +271,12 @@ config SA1100_YOPY
config SA1100_STORK config SA1100_STORK
bool "Stork" bool "Stork"
depends on ARCH_SA1100
help help
Say Y here if you intend to run this kernel on the Stork Say Y here if you intend to run this kernel on the Stork
handheld computer. handheld computer.
#config SA1100_TRIZEPS #config SA1100_TRIZEPS
# bool "Trizeps" # bool "Trizeps"
# depends on ARCH_SA1100
# help # help
# :: write me :: # :: write me ::
...@@ -319,7 +288,6 @@ config SA1100_STORK ...@@ -319,7 +288,6 @@ config SA1100_STORK
config SA1100_SSP config SA1100_SSP
tristate "Generic PIO SSP" tristate "Generic PIO SSP"
depends on ARCH_SA1100
help help
Say Y here to enable support for the generic PIO SSP driver. Say Y here to enable support for the generic PIO SSP driver.
This isn't for audio support, but for attached sensors and This isn't for audio support, but for attached sensors and
...@@ -328,7 +296,6 @@ config SA1100_SSP ...@@ -328,7 +296,6 @@ config SA1100_SSP
config SA1100_USB config SA1100_USB
tristate "SA1100 USB function support" tristate "SA1100 USB function support"
depends on ARCH_SA1100
config SA1100_USB_NETLINK config SA1100_USB_NETLINK
tristate "Support for SA11x0 USB network link function" tristate "Support for SA11x0 USB network link function"
...@@ -349,3 +316,4 @@ config H3600_SLEEVE ...@@ -349,3 +316,4 @@ config H3600_SLEEVE
endmenu endmenu
endif
...@@ -33,74 +33,74 @@ ...@@ -33,74 +33,74 @@
* OMAP-1510 FPGA * OMAP-1510 FPGA
* --------------------------------------------------------------------------- * ---------------------------------------------------------------------------
*/ */
#define OMAP1510P1_FPGA_BASE 0xE8000000 /* Virtual */ #define OMAP1510_FPGA_BASE 0xE8000000 /* Virtual */
#define OMAP1510P1_FPGA_SIZE SZ_4K #define OMAP1510_FPGA_SIZE SZ_4K
#define OMAP1510P1_FPGA_START 0x08000000 /* Physical */ #define OMAP1510_FPGA_START 0x08000000 /* Physical */
/* Revision */ /* Revision */
#define OMAP1510P1_FPGA_REV_LOW (OMAP1510P1_FPGA_BASE + 0x0) #define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0)
#define OMAP1510P1_FPGA_REV_HIGH (OMAP1510P1_FPGA_BASE + 0x1) #define OMAP1510_FPGA_REV_HIGH (OMAP1510_FPGA_BASE + 0x1)
#define OMAP1510P1_FPGA_LCD_PANEL_CONTROL (OMAP1510P1_FPGA_BASE + 0x2) #define OMAP1510_FPGA_LCD_PANEL_CONTROL (OMAP1510_FPGA_BASE + 0x2)
#define OMAP1510P1_FPGA_LED_DIGIT (OMAP1510P1_FPGA_BASE + 0x3) #define OMAP1510_FPGA_LED_DIGIT (OMAP1510_FPGA_BASE + 0x3)
#define INNOVATOR_FPGA_HID_SPI (OMAP1510P1_FPGA_BASE + 0x4) #define INNOVATOR_FPGA_HID_SPI (OMAP1510_FPGA_BASE + 0x4)
#define OMAP1510P1_FPGA_POWER (OMAP1510P1_FPGA_BASE + 0x5) #define OMAP1510_FPGA_POWER (OMAP1510_FPGA_BASE + 0x5)
/* Interrupt status */ /* Interrupt status */
#define OMAP1510P1_FPGA_ISR_LO (OMAP1510P1_FPGA_BASE + 0x6) #define OMAP1510_FPGA_ISR_LO (OMAP1510_FPGA_BASE + 0x6)
#define OMAP1510P1_FPGA_ISR_HI (OMAP1510P1_FPGA_BASE + 0x7) #define OMAP1510_FPGA_ISR_HI (OMAP1510_FPGA_BASE + 0x7)
/* Interrupt mask */ /* Interrupt mask */
#define OMAP1510P1_FPGA_IMR_LO (OMAP1510P1_FPGA_BASE + 0x8) #define OMAP1510_FPGA_IMR_LO (OMAP1510_FPGA_BASE + 0x8)
#define OMAP1510P1_FPGA_IMR_HI (OMAP1510P1_FPGA_BASE + 0x9) #define OMAP1510_FPGA_IMR_HI (OMAP1510_FPGA_BASE + 0x9)
/* Reset registers */ /* Reset registers */
#define OMAP1510P1_FPGA_HOST_RESET (OMAP1510P1_FPGA_BASE + 0xa) #define OMAP1510_FPGA_HOST_RESET (OMAP1510_FPGA_BASE + 0xa)
#define OMAP1510P1_FPGA_RST (OMAP1510P1_FPGA_BASE + 0xb) #define OMAP1510_FPGA_RST (OMAP1510_FPGA_BASE + 0xb)
#define OMAP1510P1_FPGA_AUDIO (OMAP1510P1_FPGA_BASE + 0xc) #define OMAP1510_FPGA_AUDIO (OMAP1510_FPGA_BASE + 0xc)
#define OMAP1510P1_FPGA_DIP (OMAP1510P1_FPGA_BASE + 0xe) #define OMAP1510_FPGA_DIP (OMAP1510_FPGA_BASE + 0xe)
#define OMAP1510P1_FPGA_FPGA_IO (OMAP1510P1_FPGA_BASE + 0xf) #define OMAP1510_FPGA_FPGA_IO (OMAP1510_FPGA_BASE + 0xf)
#define OMAP1510P1_FPGA_UART1 (OMAP1510P1_FPGA_BASE + 0x14) #define OMAP1510_FPGA_UART1 (OMAP1510_FPGA_BASE + 0x14)
#define OMAP1510P1_FPGA_UART2 (OMAP1510P1_FPGA_BASE + 0x15) #define OMAP1510_FPGA_UART2 (OMAP1510_FPGA_BASE + 0x15)
#define OMAP1510P1_FPGA_OMAP1510_STATUS (OMAP1510P1_FPGA_BASE + 0x16) #define OMAP1510_FPGA_OMAP1510_STATUS (OMAP1510_FPGA_BASE + 0x16)
#define OMAP1510P1_FPGA_BOARD_REV (OMAP1510P1_FPGA_BASE + 0x18) #define OMAP1510_FPGA_BOARD_REV (OMAP1510_FPGA_BASE + 0x18)
#define OMAP1510P1_PPT_DATA (OMAP1510P1_FPGA_BASE + 0x100) #define OMAP1510P1_PPT_DATA (OMAP1510_FPGA_BASE + 0x100)
#define OMAP1510P1_PPT_STATUS (OMAP1510P1_FPGA_BASE + 0x101) #define OMAP1510P1_PPT_STATUS (OMAP1510_FPGA_BASE + 0x101)
#define OMAP1510P1_PPT_CONTROL (OMAP1510P1_FPGA_BASE + 0x102) #define OMAP1510P1_PPT_CONTROL (OMAP1510_FPGA_BASE + 0x102)
#define OMAP1510P1_FPGA_TOUCHSCREEN (OMAP1510P1_FPGA_BASE + 0x204) #define OMAP1510_FPGA_TOUCHSCREEN (OMAP1510_FPGA_BASE + 0x204)
#define INNOVATOR_FPGA_INFO (OMAP1510P1_FPGA_BASE + 0x205) #define INNOVATOR_FPGA_INFO (OMAP1510_FPGA_BASE + 0x205)
#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510P1_FPGA_BASE + 0x206) #define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510_FPGA_BASE + 0x206)
#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510P1_FPGA_BASE + 0x207) #define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510_FPGA_BASE + 0x207)
#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510P1_FPGA_BASE + 0x208) #define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510_FPGA_BASE + 0x208)
#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510P1_FPGA_BASE + 0x209) #define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510_FPGA_BASE + 0x209)
#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510P1_FPGA_BASE + 0x20a) #define INNOVATOR_FPGA_LED_RED_LO (OMAP1510_FPGA_BASE + 0x20a)
#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510P1_FPGA_BASE + 0x20b) #define INNOVATOR_FPGA_LED_RED_HI (OMAP1510_FPGA_BASE + 0x20b)
#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510P1_FPGA_BASE + 0x20c) #define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510_FPGA_BASE + 0x20c)
#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510P1_FPGA_BASE + 0x20d) #define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510_FPGA_BASE + 0x20d)
#define INNOVATOR_FPGA_ISR2 (OMAP1510P1_FPGA_BASE + 0x20e) #define INNOVATOR_FPGA_ISR2 (OMAP1510_FPGA_BASE + 0x20e)
#define INNOVATOR_FPGA_IMR2 (OMAP1510P1_FPGA_BASE + 0x210) #define INNOVATOR_FPGA_IMR2 (OMAP1510_FPGA_BASE + 0x210)
#define OMAP1510P1_FPGA_ETHR_START (OMAP1510P1_FPGA_START + 0x300) #define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
#define OMAP1510P1_FPGA_ETHR_BASE (OMAP1510P1_FPGA_BASE + 0x300) #define OMAP1510_FPGA_ETHR_BASE (OMAP1510_FPGA_BASE + 0x300)
/* /*
* Power up Giga UART driver, turn on HID clock. * Power up Giga UART driver, turn on HID clock.
* Turn off BT power, since we're not using it and it * Turn off BT power, since we're not using it and it
* draws power. * draws power.
*/ */
#define OMAP1510P1_FPGA_RESET_VALUE 0x42 #define OMAP1510_FPGA_RESET_VALUE 0x42
#define OMAP1510P1_FPGA_PCR_IF_PD0 (1 << 7) #define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
#define OMAP1510P1_FPGA_PCR_COM2_EN (1 << 6) #define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
#define OMAP1510P1_FPGA_PCR_COM1_EN (1 << 5) #define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
#define OMAP1510P1_FPGA_PCR_EXP_PD0 (1 << 4) #define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
#define OMAP1510P1_FPGA_PCR_EXP_PD1 (1 << 3) #define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
#define OMAP1510P1_FPGA_PCR_48MHZ_CLK (1 << 2) #define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
#define OMAP1510P1_FPGA_PCR_4MHZ_CLK (1 << 1) #define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
#define OMAP1510P1_FPGA_PCR_RSRVD_BIT0 (1 << 0) #define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
/* /*
* Innovator/OMAP1510 FPGA HID register bit definitions * Innovator/OMAP1510 FPGA HID register bit definitions
......
...@@ -72,8 +72,12 @@ struct omap_driver { ...@@ -72,8 +72,12 @@ struct omap_driver {
* Device ID numbers for bus types * Device ID numbers for bus types
*/ */
#define OMAP_OCP_DEVID_USB 0 #define OMAP_OCP_DEVID_USB 0
#define OMAP_TIPB_DEVID_OHCI 0
#define OMAP_TIPB_DEVID_LCD 1 #define OMAP_TIPB_DEVID_LCD 1
#define OMAP_TIPB_DEVID_MMC 2 #define OMAP_TIPB_DEVID_MMC 2
#define OMAP_TIPB_DEVID_OTG 3
#define OMAP_TIPB_DEVID_UDC 4
/* /*
* Virtual bus definitions for OMAP * Virtual bus definitions for OMAP
......
...@@ -33,10 +33,10 @@ ...@@ -33,10 +33,10 @@
#define OMAP_DMA_EXT_NDMA_REQ 5 #define OMAP_DMA_EXT_NDMA_REQ 5
#define OMAP_DMA_EXT_NDMA_REQ2 6 #define OMAP_DMA_EXT_NDMA_REQ2 6
#define OMAP_DMA_UWIRE_TX 7 #define OMAP_DMA_UWIRE_TX 7
#define OMAP_DMA_MCBSP1_DMA_TX 8 #define OMAP_DMA_MCBSP1_TX 8
#define OMAP_DMA_MCBSP1_DMA_RX 9 #define OMAP_DMA_MCBSP1_RX 9
#define OMAP_DMA_MCBSP3_DMA_TX 10 #define OMAP_DMA_MCBSP3_TX 10
#define OMAP_DMA_MCBSP3_DMA_RX 11 #define OMAP_DMA_MCBSP3_RX 11
#define OMAP_DMA_UART1_TX 12 #define OMAP_DMA_UART1_TX 12
#define OMAP_DMA_UART1_RX 13 #define OMAP_DMA_UART1_RX 13
#define OMAP_DMA_UART2_TX 14 #define OMAP_DMA_UART2_TX 14
...@@ -86,75 +86,77 @@ ...@@ -86,75 +86,77 @@
#define OMAP_DMA_CRYPTO_DES_OUT 56 #define OMAP_DMA_CRYPTO_DES_OUT 56
#define OMAP_DMA_BASE 0xfffed800 #define OMAP_DMA_BASE (0xfffed800)
#define OMAP_DMA_GCR_REG (OMAP_DMA_BASE + 0x400) #define OMAP_DMA_GCR (OMAP_DMA_BASE + 0x400)
#define OMAP_DMA_GSCR_REG (OMAP_DMA_BASE + 0x404) #define OMAP_DMA_GSCR (OMAP_DMA_BASE + 0x404)
#define OMAP_DMA_GRST_REG (OMAP_DMA_BASE + 0x408) #define OMAP_DMA_GRST (OMAP_DMA_BASE + 0x408)
#define OMAP_DMA_HW_ID_REG (OMAP_DMA_BASE + 0x442) #define OMAP_DMA_HW_ID (OMAP_DMA_BASE + 0x442)
#define OMAP_DMA_PCH2_ID_REG (OMAP_DMA_BASE + 0x444) #define OMAP_DMA_PCH2_ID (OMAP_DMA_BASE + 0x444)
#define OMAP_DMA_PCH0_ID (OMAP_DMA_BASE + 0x446) #define OMAP_DMA_PCH0_ID (OMAP_DMA_BASE + 0x446)
#define OMAP_DMA_PCH1_ID (OMAP_DMA_BASE + 0x448) #define OMAP_DMA_PCH1_ID (OMAP_DMA_BASE + 0x448)
#define OMAP_DMA_PCHG_ID (OMAP_DMA_BASE + 0x44a) #define OMAP_DMA_PCHG_ID (OMAP_DMA_BASE + 0x44a)
#define OMAP_DMA_PCHD_ID (OMAP_DMA_BASE + 0x44c) #define OMAP_DMA_PCHD_ID (OMAP_DMA_BASE + 0x44c)
#define OMAP_DMA_CAPS_0_U_REG (OMAP_DMA_BASE + 0x44e) #define OMAP_DMA_CAPS_0_U (OMAP_DMA_BASE + 0x44e)
#define OMAP_DMA_CAPS_0_L_REG (OMAP_DMA_BASE + 0x450) #define OMAP_DMA_CAPS_0_L (OMAP_DMA_BASE + 0x450)
#define OMAP_DMA_CAPS_1_U_REG (OMAP_DMA_BASE + 0x452) #define OMAP_DMA_CAPS_1_U (OMAP_DMA_BASE + 0x452)
#define OMAP_DMA_CAPS_1_L_REG (OMAP_DMA_BASE + 0x454) #define OMAP_DMA_CAPS_1_L (OMAP_DMA_BASE + 0x454)
#define OMAP_DMA_CAPS_2_REG (OMAP_DMA_BASE + 0x456) #define OMAP_DMA_CAPS_2 (OMAP_DMA_BASE + 0x456)
#define OMAP_DMA_CAPS_3_REG (OMAP_DMA_BASE + 0x458) #define OMAP_DMA_CAPS_3 (OMAP_DMA_BASE + 0x458)
#define OMAP_DMA_CAPS_4_REG (OMAP_DMA_BASE + 0x45a) #define OMAP_DMA_CAPS_4 (OMAP_DMA_BASE + 0x45a)
#define OMAP_DMA_PCH2_SR_REG (OMAP_DMA_BASE + 0x460) #define OMAP_DMA_PCH2_SR (OMAP_DMA_BASE + 0x460)
#define OMAP_DMA_PCH0_SR_REG (OMAP_DMA_BASE + 0x480) #define OMAP_DMA_PCH0_SR (OMAP_DMA_BASE + 0x480)
#define OMAP_DMA_PCH1_SR_REG (OMAP_DMA_BASE + 0x482) #define OMAP_DMA_PCH1_SR (OMAP_DMA_BASE + 0x482)
#define OMAP_DMA_PCHD_SR_REG (OMAP_DMA_BASE + 0x4c0) #define OMAP_DMA_PCHD_SR (OMAP_DMA_BASE + 0x4c0)
#define OMAP1510_DMA_LCD_CTRL 0xfffedb00 #define OMAP1510_DMA_LCD_BASE (0xfffedb00)
#define OMAP1510_DMA_LCD_TOP_F1_L 0xfffedb02 #define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00)
#define OMAP1510_DMA_LCD_TOP_F1_U 0xfffedb04 #define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02)
#define OMAP1510_DMA_LCD_BOT_F1_L 0xfffedb06 #define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04)
#define OMAP1510_DMA_LCD_BOT_F1_U 0xfffedb08 #define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06)
#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08)
#define OMAP1610_DMA_LCD_CSDP 0xfffee3c0
#define OMAP1610_DMA_LCD_CCR 0xfffee3c2 #define OMAP1610_DMA_LCD_BASE (0xfffee300)
#define OMAP1610_DMA_LCD_CTRL 0xfffee3c4 #define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0)
#define OMAP1610_DMA_LCD_TOP_B1_L 0xfffee3c8 #define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2)
#define OMAP1610_DMA_LCD_TOP_B1_U 0xfffee3ca #define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4)
#define OMAP1610_DMA_LCD_BOT_B1_L 0xfffee3cc #define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8)
#define OMAP1610_DMA_LCD_BOT_B1_U 0xfffee3ce #define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca)
#define OMAP1610_DMA_LCD_TOP_B2_L 0xfffee3d0 #define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc)
#define OMAP1610_DMA_LCD_TOP_B2_U 0xfffee3d2 #define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce)
#define OMAP1610_DMA_LCD_BOT_B2_L 0xfffee3d4 #define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0)
#define OMAP1610_DMA_LCD_BOT_B2_U 0xfffee3d6 #define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2)
#define OMAP1610_DMA_LCD_SRC_EI_B1 0xfffee3d8 #define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4)
#define OMAP1610_DMA_LCD_SRC_FI_B1_L 0xfffee3da #define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6)
#define OMAP1610_DMA_LCD_SRC_EN_B1 0xfffee3e0 #define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8)
#define OMAP1610_DMA_LCD_SRC_FN_B1 0xfffee3e4 #define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda)
#define OMAP1610_DMA_LCD_LCH_CTRL 0xfffee3ea #define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0)
#define OMAP1610_DMA_LCD_SRC_FI_B1_U 0xfffee3f4 #define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4)
#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea)
#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4)
/* Every LCh has its own set of the registers below */ /* Every LCh has its own set of the registers below */
#define OMAP_DMA_CSDP_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x00) #define OMAP_DMA_CSDP(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x00)
#define OMAP_DMA_CCR_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x02) #define OMAP_DMA_CCR(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x02)
#define OMAP_DMA_CICR_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x04) #define OMAP_DMA_CICR(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x04)
#define OMAP_DMA_CSR_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x06) #define OMAP_DMA_CSR(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x06)
#define OMAP_DMA_CSSA_L_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x08) #define OMAP_DMA_CSSA_L(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x08)
#define OMAP_DMA_CSSA_U_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0a) #define OMAP_DMA_CSSA_U(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0a)
#define OMAP_DMA_CDSA_L_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0c) #define OMAP_DMA_CDSA_L(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0c)
#define OMAP_DMA_CDSA_U_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0e) #define OMAP_DMA_CDSA_U(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0e)
#define OMAP_DMA_CEN_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x10) #define OMAP_DMA_CEN(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x10)
#define OMAP_DMA_CFN_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x12) #define OMAP_DMA_CFN(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x12)
#define OMAP_DMA_CSFI_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x14) #define OMAP_DMA_CSFI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x14)
#define OMAP_DMA_CSEI_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x16) #define OMAP_DMA_CSEI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x16)
#define OMAP_DMA_CSAC_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x18) #define OMAP_DMA_CSAC(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x18)
#define OMAP_DMA_CDAC_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1a) #define OMAP_DMA_CDAC(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1a)
#define OMAP_DMA_CDEI_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1c) #define OMAP_DMA_CDEI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1c)
#define OMAP_DMA_CDFI_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1e) #define OMAP_DMA_CDFI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1e)
#define OMAP_DMA_COLOR_L_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x20) #define OMAP_DMA_COLOR_L(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x20)
#define OMAP_DMA_COLOR_U_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x22) #define OMAP_DMA_COLOR_U(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x22)
#define OMAP_DMA_CCR2_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x24) #define OMAP_DMA_CCR2(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x24)
#define OMAP_DMA_CLNK_CTRL_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x28) #define OMAP_DMA_CLNK_CTRL(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x28)
#define OMAP_DMA_LCH_CTRL_REG(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x2a) #define OMAP_DMA_LCH_CTRL(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x2a)
#define OMAP_DMA_TOUT_IRQ (1 << 0) #define OMAP_DMA_TOUT_IRQ (1 << 0)
#define OMAP_DMA_DROP_IRQ (1 << 1) #define OMAP_DMA_DROP_IRQ (1 << 1)
...@@ -192,6 +194,11 @@ enum { ...@@ -192,6 +194,11 @@ enum {
OMAP_LCD_DMA_B2_BOTTOM OMAP_LCD_DMA_B2_BOTTOM
}; };
enum {
OMAP_DMA_DATA_BURST_4,
OMAP_DMA_DATA_BURST_8
};
extern int omap_request_dma(int dev_id, const char *dev_name, extern int omap_request_dma(int dev_id, const char *dev_name,
void (* callback)(int lch, u16 ch_status, void *data), void (* callback)(int lch, u16 ch_status, void *data),
void *data, int *dma_ch); void *data, int *dma_ch);
...@@ -203,10 +210,20 @@ extern void omap_stop_dma(int lch); ...@@ -203,10 +210,20 @@ extern void omap_stop_dma(int lch);
extern void omap_set_dma_transfer_params(int lch, int data_type, extern void omap_set_dma_transfer_params(int lch, int data_type,
int elem_count, int frame_count, int elem_count, int frame_count,
int sync_mode); int sync_mode);
extern void omap_set_dma_constant_fill(int lch, u32 color);
extern void omap_set_dma_transparent_copy(int lch, u32 color);
extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
unsigned long src_start); unsigned long src_start);
extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
extern void omap_set_dma_src_data_pack(int lch, int enable);
extern void omap_set_dma_src_burst_mode(int lch, int burst_mode);
extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
unsigned long dest_start); unsigned long dest_start);
extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
extern void omap_set_dma_dest_data_pack(int lch, int enable);
extern void omap_set_dma_dest_burst_mode(int lch, int burst_mode);
extern void omap_dma_link_lch (int lch_head, int lch_queue); extern void omap_dma_link_lch (int lch_head, int lch_queue);
extern void omap_dma_unlink_lch (int lch_head, int lch_queue); extern void omap_dma_unlink_lch (int lch_head, int lch_queue);
......
...@@ -32,18 +32,18 @@ ...@@ -32,18 +32,18 @@
#define OMAP_MPUIO_BASE 0xfffb5000 #define OMAP_MPUIO_BASE 0xfffb5000
#define OMAP_MPUIO_INPUT_LATCH 0x00 #define OMAP_MPUIO_INPUT_LATCH 0x00
#define OMAP_MPUIO_OUTPUT_REG 0x04 #define OMAP_MPUIO_OUTPUT 0x04
#define OMAP_MPUIO_IO_CNTL 0x08 #define OMAP_MPUIO_IO_CNTL 0x08
#define OMAP_MPUIO_KBR_LATCH 0x10 #define OMAP_MPUIO_KBR_LATCH 0x10
#define OMAP_MPUIO_KBC_REG 0x14 #define OMAP_MPUIO_KBC 0x14
#define OMAP_MPUIO_GPIO_EVENT_MODE_REG 0x18 #define OMAP_MPUIO_GPIO_EVENT_MODE 0x18
#define OMAP_MPUIO_GPIO_INT_EDGE_REG 0x1c #define OMAP_MPUIO_GPIO_INT_EDGE 0x1c
#define OMAP_MPUIO_KBD_INT 0x20 #define OMAP_MPUIO_KBD_INT 0x20
#define OMAP_MPUIO_GPIO_INT 0x24 #define OMAP_MPUIO_GPIO_INT 0x24
#define OMAP_MPUIO_KBD_MASKIT 0x28 #define OMAP_MPUIO_KBD_MASKIT 0x28
#define OMAP_MPUIO_GPIO_MASKIT 0x2c #define OMAP_MPUIO_GPIO_MASKIT 0x2c
#define OMAP_MPUIO_GPIO_DEBOUNCING_REG 0x30 #define OMAP_MPUIO_GPIO_DEBOUNCING 0x30
#define OMAP_MPUIO_LATCH_REG 0x34 #define OMAP_MPUIO_LATCH 0x34
#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) #define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) #define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
......
This diff is collapsed.
/* /*
* linux/include/asm-arm/arch-omap/io.h * linux/include/asm-arm/arch-omap/io.h
* *
* IO definitions for TI OMAP processors and boards
*
* Copied from linux/include/asm-arm/arch-sa1100/io.h * Copied from linux/include/asm-arm/arch-sa1100/io.h
* Copyright (C) 1997-1999 Russell King * Copyright (C) 1997-1999 Russell King
* *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Modifications: * Modifications:
* 06-12-1997 RMK Created. * 06-12-1997 RMK Created.
* 07-04-1999 RMK Major cleanup * 07-04-1999 RMK Major cleanup
*/ */
#ifndef __ASM_ARM_ARCH_IO_H #ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H
...@@ -21,6 +44,24 @@ ...@@ -21,6 +44,24 @@
#define __mem_pci(a) ((unsigned long)(a)) #define __mem_pci(a) ((unsigned long)(a))
#define __mem_isa(a) ((unsigned long)(a)) #define __mem_isa(a) ((unsigned long)(a))
/*
* ----------------------------------------------------------------------------
* I/O mapping
* ----------------------------------------------------------------------------
*/
#define IO_PHYS 0xFFFB0000
#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define IO_VIRT (IO_PHYS - IO_OFFSET)
#define IO_SIZE 0x40000
#define IO_ADDRESS(x) ((x) - IO_OFFSET)
#define PCIO_BASE 0
#define io_p2v(x) ((x) - IO_OFFSET)
#define io_v2p(x) ((x) + IO_OFFSET)
#ifndef __ASSEMBLER__
/* /*
* Functions to access the OMAP IO region * Functions to access the OMAP IO region
* *
...@@ -38,4 +79,29 @@ ...@@ -38,4 +79,29 @@
#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v)) #define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v))
#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v)) #define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v))
/* 16 bit uses LDRH/STRH, base +/- offset_8 */
typedef struct { volatile u16 offset[256]; } __regbase16;
#define __REGV16(vaddr) ((__regbase16 *)((vaddr)&~0xff)) \
->offset[((vaddr)&0xff)>>1]
#define __REG16(paddr) __REGV16(io_p2v(paddr))
/* 8/32 bit uses LDR/STR, base +/- offset_12 */
typedef struct { volatile u8 offset[4096]; } __regbase8;
#define __REGV8(vaddr) ((__regbase8 *)((vaddr)&~4095)) \
->offset[((vaddr)&4095)>>0]
#define __REG8(paddr) __REGV8(io_p2v(paddr))
typedef struct { volatile u32 offset[4096]; } __regbase32;
#define __REGV32(vaddr) ((__regbase32 *)((vaddr)&~4095)) \
->offset[((vaddr)&4095)>>2]
#define __REG32(paddr) __REGV32(io_p2v(paddr))
#else
#define __REG8(paddr) io_p2v(paddr)
#define __REG16(paddr) io_p2v(paddr)
#define __REG32(paddr) io_p2v(paddr)
#endif
#endif #endif
...@@ -140,16 +140,20 @@ typedef enum { ...@@ -140,16 +140,20 @@ typedef enum {
R18_1510_USB_GPIO0, R18_1510_USB_GPIO0,
W4_USB_PUEN, W4_USB_PUEN,
W4_USB_CLKO, W4_USB_CLKO,
W4_USB_HIGHZ,
W4_GPIO58,
/* USB1 master */ /* USB1 master */
USB1_SUSP, USB1_SUSP,
USB1_SEO, USB1_SEO,
W13_1610_USB1_SE0,
USB1_TXEN, USB1_TXEN,
USB1_TXD, USB1_TXD,
USB1_VP, USB1_VP,
USB1_VM, USB1_VM,
USB1_RCV, USB1_RCV,
USB1_SPEED, USB1_SPEED,
R13_1610_USB1_SPEED,
/* USB2 master */ /* USB2 master */
USB2_SUSP, USB2_SUSP,
...@@ -216,6 +220,7 @@ typedef enum { ...@@ -216,6 +220,7 @@ typedef enum {
/* OMAP-1610 GPIO */ /* OMAP-1610 GPIO */
P20_1610_GPIO4, P20_1610_GPIO4,
V9_1610_GPIO7, V9_1610_GPIO7,
W8_1610_GPIO9,
N19_1610_GPIO13, N19_1610_GPIO13,
P10_1610_GPIO22, P10_1610_GPIO22,
V5_1610_GPIO24, V5_1610_GPIO24,
...@@ -317,16 +322,20 @@ MUX_CFG("R18_USB_VBUS", 7, 9, 2, 1, 11, 0, NA, 0, 1) ...@@ -317,16 +322,20 @@ MUX_CFG("R18_USB_VBUS", 7, 9, 2, 1, 11, 0, NA, 0, 1)
MUX_CFG("R18_1510_USB_GPIO0", 7, 9, 0, 1, 11, 1, NA, 0, 1) MUX_CFG("R18_1510_USB_GPIO0", 7, 9, 0, 1, 11, 1, NA, 0, 1)
MUX_CFG("W4_USB_PUEN", D, 3, 0, 3, 5, 1, NA, 0, 1) MUX_CFG("W4_USB_PUEN", D, 3, 0, 3, 5, 1, NA, 0, 1)
MUX_CFG("W4_USB_CLKO", D, 3, 1, 3, 5, 0, NA, 0, 1) MUX_CFG("W4_USB_CLKO", D, 3, 1, 3, 5, 0, NA, 0, 1)
MUX_CFG("W4_USB_HIGHZ", D, 3, 4, 3, 5, 0, 3, 0, 1)
MUX_CFG("W4_GPIO58", D, 3, 7, 3, 5, 0, 3, 0, 1)
/* USB1 master */ /* USB1 master */
MUX_CFG("USB1_SUSP", 8, 27, 2, 1, 27, 0, NA, 0, 1) MUX_CFG("USB1_SUSP", 8, 27, 2, 1, 27, 0, NA, 0, 1)
MUX_CFG("USB1_SE0", 9, 0, 2, 1, 28, 0, NA, 0, 1) MUX_CFG("USB1_SE0", 9, 0, 2, 1, 28, 0, NA, 0, 1)
MUX_CFG("W13_1610_USB1_SE0", 9, 0, 4, 1, 28, 0, NA, 0, 1)
MUX_CFG("USB1_TXEN", 9, 3, 2, 1, 29, 0, NA, 0, 1) MUX_CFG("USB1_TXEN", 9, 3, 2, 1, 29, 0, NA, 0, 1)
MUX_CFG("USB1_TXD", 9, 24, 1, 2, 4, 0, NA, 0, 1) MUX_CFG("USB1_TXD", 9, 24, 1, 2, 4, 0, NA, 0, 1)
MUX_CFG("USB1_VP", A, 3, 1, 2, 7, 0, NA, 0, 1) MUX_CFG("USB1_VP", A, 3, 1, 2, 7, 0, NA, 0, 1)
MUX_CFG("USB1_VM", A, 6, 1, 2, 8, 0, NA, 0, 1) MUX_CFG("USB1_VM", A, 6, 1, 2, 8, 0, NA, 0, 1)
MUX_CFG("USB1_RCV", A, 9, 1, 2, 9, 0, NA, 0, 1) MUX_CFG("USB1_RCV", A, 9, 1, 2, 9, 0, NA, 0, 1)
MUX_CFG("USB1_SPEED", A, 12, 2, 2, 10, 0, NA, 0, 1) MUX_CFG("USB1_SPEED", A, 12, 2, 2, 10, 0, NA, 0, 1)
MUX_CFG("R13_1610_USB1_SPEED", A, 12, 5, 2, 10, 0, NA, 0, 1)
/* USB2 master */ /* USB2 master */
MUX_CFG("USB2_SUSP", B, 3, 1, 2, 17, 0, NA, 0, 1) MUX_CFG("USB2_SUSP", B, 3, 1, 2, 17, 0, NA, 0, 1)
...@@ -394,6 +403,7 @@ MUX_CFG("J18_1610_ETM_D7", 5, 27, 1, 0, 19, 0, 0, 0, 1) ...@@ -394,6 +403,7 @@ MUX_CFG("J18_1610_ETM_D7", 5, 27, 1, 0, 19, 0, 0, 0, 1)
/* OMAP-1610 GPIO */ /* OMAP-1610 GPIO */
MUX_CFG("P20_1610_GPIO4", 6, 27, 0, 1, 7, 0, 1, 1, 1) MUX_CFG("P20_1610_GPIO4", 6, 27, 0, 1, 7, 0, 1, 1, 1)
MUX_CFG("V9_1610_GPIO7", B, 12, 1, 2, 20, 0, 2, 1, 1) MUX_CFG("V9_1610_GPIO7", B, 12, 1, 2, 20, 0, 2, 1, 1)
MUX_CFG("W8_1610_GPIO9", B, 21, 0, 2, 23, 0, 2, 1, 1)
MUX_CFG("N19_1610_GPIO13", 6, 12, 0, 1, 2, 0, 1, 1, 1) MUX_CFG("N19_1610_GPIO13", 6, 12, 0, 1, 2, 0, 1, 1, 1)
MUX_CFG("P10_1610_GPIO22", C, 0, 7, 2, 26, 0, 2, 1, 1) MUX_CFG("P10_1610_GPIO22", C, 0, 7, 2, 26, 0, 2, 1, 1)
MUX_CFG("V5_1610_GPIO24", B, 15, 7, 2, 21, 0, 2, 1, 1) MUX_CFG("V5_1610_GPIO24", B, 15, 7, 2, 21, 0, 2, 1, 1)
...@@ -405,7 +415,7 @@ MUX_CFG("U18_1610_UWIRE_SDI", 8, 0, 0, 1, 18, 0, 1, 1, 1) ...@@ -405,7 +415,7 @@ MUX_CFG("U18_1610_UWIRE_SDI", 8, 0, 0, 1, 18, 0, 1, 1, 1)
MUX_CFG("W21_1610_UWIRE_SDO", 8, 3, 0, 1, 19, 0, 1, 1, 1) MUX_CFG("W21_1610_UWIRE_SDO", 8, 3, 0, 1, 19, 0, 1, 1, 1)
MUX_CFG("N14_1610_UWIRE_CS0", 8, 9, 1, 1, 21, 0, 1, 1, 1) MUX_CFG("N14_1610_UWIRE_CS0", 8, 9, 1, 1, 21, 0, 1, 1, 1)
MUX_CFG("P15_1610_UWIRE_CS3", 8, 12, 1, 1, 22, 0, 1, 1, 1) MUX_CFG("P15_1610_UWIRE_CS3", 8, 12, 1, 1, 22, 0, 1, 1, 1)
MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, NA, 0, 0, NA, 0, 0) MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, 1, 14, 0, NA, 0, 1)
/* First MMC interface, same on 1510 and 1610 */ /* First MMC interface, same on 1510 and 1610 */
MUX_CFG("MMC_CMD", A, 27, 0, 2, 15, 1, 2, 1, 1) MUX_CFG("MMC_CMD", A, 27, 0, 2, 15, 1, 2, 1, 1)
......
/*
* linux/include/asm-arm/arch-omap/omap-h2.h
*
* Hardware definitions for TI OMAP1610 H2 board.
*
* Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_ARCH_OMAP_H2_H
#define __ASM_ARCH_OMAP_H2_H
/* Placeholder for H2 specific defines */
#endif /* __ASM_ARCH_OMAP_H2_H */
/*
* linux/include/asm-arm/arch-omap/omap-innovator.h
*
* Copyright (C) 2001 RidgeRun, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
#define __ASM_ARCH_OMAP_INNOVATOR_H
#if defined (CONFIG_ARCH_OMAP1510)
/*
* ---------------------------------------------------------------------------
* OMAP-1510 FPGA
* ---------------------------------------------------------------------------
*/
#define OMAP1510P1_FPGA_BASE 0xE8000000 /* Virtual */
#define OMAP1510P1_FPGA_SIZE SZ_4K
#define OMAP1510P1_FPGA_START 0x08000000 /* Physical */
/* Revision */
#define OMAP1510P1_FPGA_REV_LOW (OMAP1510P1_FPGA_BASE + 0x0)
#define OMAP1510P1_FPGA_REV_HIGH (OMAP1510P1_FPGA_BASE + 0x1)
#define OMAP1510P1_FPGA_LCD_PANEL_CONTROL (OMAP1510P1_FPGA_BASE + 0x2)
#define OMAP1510P1_FPGA_LED_DIGIT (OMAP1510P1_FPGA_BASE + 0x3)
#define INNOVATOR_FPGA_HID_SPI (OMAP1510P1_FPGA_BASE + 0x4)
#define OMAP1510P1_FPGA_POWER (OMAP1510P1_FPGA_BASE + 0x5)
/* Interrupt status */
#define OMAP1510P1_FPGA_ISR_LO (OMAP1510P1_FPGA_BASE + 0x6)
#define OMAP1510P1_FPGA_ISR_HI (OMAP1510P1_FPGA_BASE + 0x7)
/* Interrupt mask */
#define OMAP1510P1_FPGA_IMR_LO (OMAP1510P1_FPGA_BASE + 0x8)
#define OMAP1510P1_FPGA_IMR_HI (OMAP1510P1_FPGA_BASE + 0x9)
/* Reset registers */
#define OMAP1510P1_FPGA_HOST_RESET (OMAP1510P1_FPGA_BASE + 0xa)
#define OMAP1510P1_FPGA_RST (OMAP1510P1_FPGA_BASE + 0xb)
#define OMAP1510P1_FPGA_AUDIO (OMAP1510P1_FPGA_BASE + 0xc)
#define OMAP1510P1_FPGA_DIP (OMAP1510P1_FPGA_BASE + 0xe)
#define OMAP1510P1_FPGA_FPGA_IO (OMAP1510P1_FPGA_BASE + 0xf)
#define OMAP1510P1_FPGA_UART1 (OMAP1510P1_FPGA_BASE + 0x14)
#define OMAP1510P1_FPGA_UART2 (OMAP1510P1_FPGA_BASE + 0x15)
#define OMAP1510P1_FPGA_OMAP1510_STATUS (OMAP1510P1_FPGA_BASE + 0x16)
#define OMAP1510P1_FPGA_BOARD_REV (OMAP1510P1_FPGA_BASE + 0x18)
#define OMAP1510P1_PPT_DATA (OMAP1510P1_FPGA_BASE + 0x100)
#define OMAP1510P1_PPT_STATUS (OMAP1510P1_FPGA_BASE + 0x101)
#define OMAP1510P1_PPT_CONTROL (OMAP1510P1_FPGA_BASE + 0x102)
#define OMAP1510P1_FPGA_TOUCHSCREEN (OMAP1510P1_FPGA_BASE + 0x204)
#define INNOVATOR_FPGA_INFO (OMAP1510P1_FPGA_BASE + 0x205)
#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510P1_FPGA_BASE + 0x206)
#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510P1_FPGA_BASE + 0x207)
#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510P1_FPGA_BASE + 0x208)
#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510P1_FPGA_BASE + 0x209)
#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510P1_FPGA_BASE + 0x20a)
#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510P1_FPGA_BASE + 0x20b)
#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510P1_FPGA_BASE + 0x20c)
#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510P1_FPGA_BASE + 0x20d)
#define INNOVATOR_FPGA_ISR2 (OMAP1510P1_FPGA_BASE + 0x20e)
#define INNOVATOR_FPGA_IMR2 (OMAP1510P1_FPGA_BASE + 0x210)
#define OMAP1510P1_FPGA_ETHR_START (OMAP1510P1_FPGA_START + 0x300)
#define OMAP1510P1_FPGA_ETHR_BASE (OMAP1510P1_FPGA_BASE + 0x300)
/*
* Power up Giga UART driver, turn on HID clock.
* Turn off BT power, since we're not using it and it
* draws power.
*/
#define OMAP1510P1_FPGA_RESET_VALUE 0x42
#define OMAP1510P1_FPGA_PCR_IF_PD0 (1 << 7)
#define OMAP1510P1_FPGA_PCR_COM2_EN (1 << 6)
#define OMAP1510P1_FPGA_PCR_COM1_EN (1 << 5)
#define OMAP1510P1_FPGA_PCR_EXP_PD0 (1 << 4)
#define OMAP1510P1_FPGA_PCR_EXP_PD1 (1 << 3)
#define OMAP1510P1_FPGA_PCR_48MHZ_CLK (1 << 2)
#define OMAP1510P1_FPGA_PCR_4MHZ_CLK (1 << 1)
#define OMAP1510P1_FPGA_PCR_RSRVD_BIT0 (1 << 0)
/*
* Innovator/OMAP1510 FPGA HID register bit definitions
*/
#define FPGA_HID_SCLK (1<<0) /* output */
#define FPGA_HID_MOSI (1<<1) /* output */
#define FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
#define FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
#define FPGA_HID_MISO (1<<4) /* input */
#define FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
#define FPGA_HID_rsrvd (1<<6)
#define FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
#ifndef OMAP_SDRAM_DEVICE
#define OMAP_SDRAM_DEVICE D256M_1X16_4B
#endif
#define OMAP1510P1_IMIF_PRI_VALUE 0x00
#define OMAP1510P1_EMIFS_PRI_VALUE 0x00
#define OMAP1510P1_EMIFF_PRI_VALUE 0x00
/*
* These definitions define an area of FLASH set aside
* for the use of MTD/JFFS2. This is the area of flash
* that a JFFS2 filesystem will reside which is mounted
* at boot with the "root=/dev/mtdblock/0 rw"
* command line option. The flash address used here must
* fall within the legal range defined by rrload for storing
* the filesystem component. This address will be sufficiently
* deep into the overall flash range to avoid the other
* components also stored in flash such as the bootloader,
* the bootloader params, and the kernel.
* The SW2 settings for the map below are:
* 1 off, 2 off, 3 on, 4 off.
*/
/* Intel flash_0, partitioned as expected by rrload */
#define OMAP_FLASH_0_BASE 0xD8000000
#define OMAP_FLASH_0_START 0x00000000
#define OMAP_FLASH_0_SIZE SZ_16M
/* Intel flash_1, used for cramfs or other flash file systems */
#define OMAP_FLASH_1_BASE 0xD9000000
#define OMAP_FLASH_1_START 0x01000000
#define OMAP_FLASH_1_SIZE SZ_16M
/* The FPGA IRQ is cascaded through GPIO_13 */
#define INT_FPGA (IH_GPIO_BASE + 13)
/* IRQ Numbers for interrupts muxed through the FPGA */
#define IH_FPGA_BASE IH_BOARD_BASE
#define INT_FPGA_ATN (IH_FPGA_BASE + 0)
#define INT_FPGA_ACK (IH_FPGA_BASE + 1)
#define INT_FPGA2 (IH_FPGA_BASE + 2)
#define INT_FPGA3 (IH_FPGA_BASE + 3)
#define INT_FPGA4 (IH_FPGA_BASE + 4)
#define INT_FPGA5 (IH_FPGA_BASE + 5)
#define INT_FPGA6 (IH_FPGA_BASE + 6)
#define INT_FPGA7 (IH_FPGA_BASE + 7)
#define INT_FPGA8 (IH_FPGA_BASE + 8)
#define INT_FPGA9 (IH_FPGA_BASE + 9)
#define INT_FPGA10 (IH_FPGA_BASE + 10)
#define INT_FPGA11 (IH_FPGA_BASE + 11)
#define INT_FPGA12 (IH_FPGA_BASE + 12)
#define INT_ETHER (IH_FPGA_BASE + 13)
#define INT_FPGAUART1 (IH_FPGA_BASE + 14)
#define INT_FPGAUART2 (IH_FPGA_BASE + 15)
#define INT_FPGA_TS (IH_FPGA_BASE + 16)
#define INT_FPGA17 (IH_FPGA_BASE + 17)
#define INT_FPGA_CAM (IH_FPGA_BASE + 18)
#define INT_FPGA_RTC_A (IH_FPGA_BASE + 19)
#define INT_FPGA_RTC_B (IH_FPGA_BASE + 20)
#define INT_FPGA_CD (IH_FPGA_BASE + 21)
#define INT_FPGA22 (IH_FPGA_BASE + 22)
#define INT_FPGA23 (IH_FPGA_BASE + 23)
#define NR_FPGA_IRQS 24
#define MAXIRQNUM (IH_FPGA_BASE + NR_FPGA_IRQS - 1)
#define MAXFIQNUM MAXIRQNUM
#define MAXSWINUM MAXIRQNUM
#define NR_IRQS 256
#ifndef __ASSEMBLY__
void fpga_write(unsigned char val, int reg);
unsigned char fpga_read(int reg);
#endif
#elif defined (CONFIG_ARCH_OMAP1610)
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_BASE 0xE8000000
#define OMAP1610_ETHR_SIZE SZ_4K
#define OMAP1610_ETHR_START 0x04000000
/* Intel STRATA NOR flash at CS3 */
#define OMAP1610_NOR_FLASH_BASE 0xD8000000
#define OMAP1610_NOR_FLASH_SIZE SZ_32M
#define OMAP1610_NOR_FLASH_START 0x0C000000
#define MAXIRQNUM (IH_BOARD_BASE)
#define MAXFIQNUM MAXIRQNUM
#define MAXSWINUM MAXIRQNUM
#define NR_IRQS (MAXIRQNUM + 1)
#else
#error "Only OMAP1510 and OMAP1610 Innovator supported!"
#endif
#endif
/*
* linux/include/asm-arm/arch-omap/omap-perseus2.h
*
* Copyright 2003 by Texas Instruments Incorporated
* OMAP730 / P2-sample additions
* Author: Jean Pihet
*
* Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
* Author: RidgeRun, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_ARCH_OMAP_P2SAMPLE_H
#define __ASM_ARCH_OMAP_P2SAMPLE_H
#if defined(CONFIG_ARCH_OMAP730) && defined (CONFIG_MACH_OMAP_PERSEUS2)
/*
* NOTE: ALL DEFINITIONS IN THIS FILE NEED TO BE PREFIXED BY IDENTIFIER
* P2SAMPLE_ since they are specific to the EVM and not the chip.
*/
/* ---------------------------------------------------------------------------
* OMAP730 Debug Board FPGA
* ---------------------------------------------------------------------------
*
*/
/* maps in the FPGA registers and the ETHR registers */
#define OMAP730_FPGA_BASE 0xE8000000 /* VA */
#define OMAP730_FPGA_SIZE SZ_4K /* SIZE */
#define OMAP730_FPGA_START 0x04000000 /* PA */
#define OMAP730_FPGA_ETHR_START OMAP730_FPGA_START
#define OMAP730_FPGA_ETHR_BASE OMAP730_FPGA_BASE
#define OMAP730_FPGA_FPGA_REV (OMAP730_FPGA_BASE + 0x10) /* FPGA Revision */
#define OMAP730_FPGA_BOARD_REV (OMAP730_FPGA_BASE + 0x12) /* Board Revision */
#define OMAP730_FPGA_GPIO (OMAP730_FPGA_BASE + 0x14) /* GPIO outputs */
#define OMAP730_FPGA_LEDS (OMAP730_FPGA_BASE + 0x16) /* LEDs outputs */
#define OMAP730_FPGA_MISC_INPUTS (OMAP730_FPGA_BASE + 0x18) /* Misc inputs */
#define OMAP730_FPGA_LAN_STATUS (OMAP730_FPGA_BASE + 0x1A) /* LAN Status line */
#define OMAP730_FPGA_LAN_RESET (OMAP730_FPGA_BASE + 0x1C) /* LAN Reset line */
// LEDs definition on debug board (16 LEDs)
#define OMAP730_FPGA_LED_CLAIMRELEASE (1 << 15)
#define OMAP730_FPGA_LED_STARTSTOP (1 << 14)
#define OMAP730_FPGA_LED_HALTED (1 << 13)
#define OMAP730_FPGA_LED_IDLE (1 << 12)
#define OMAP730_FPGA_LED_TIMER (1 << 11)
// cpu0 load-meter LEDs
#define OMAP730_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
#define OMAP730_FPGA_LOAD_METER_SIZE 11
#define OMAP730_FPGA_LOAD_METER_MASK ((1 << OMAP730_FPGA_LOAD_METER_SIZE) - 1)
#ifndef OMAP_SDRAM_DEVICE
#define OMAP_SDRAM_DEVICE D256M_1X16_4B
#endif
/*
* These definitions define an area of FLASH set aside
* for the use of MTD/JFFS2. This is the area of flash
* that a JFFS2 filesystem will reside which is mounted
* at boot with the "root=/dev/mtdblock/0 rw"
* command line option.
*/
/* Intel flash_0, partitioned as expected by rrload */
#define OMAP_FLASH_0_BASE 0xD8000000 /* VA */
#define OMAP_FLASH_0_START 0x00000000 /* PA */
#define OMAP_FLASH_0_SIZE SZ_32M
/* 2.9.6 Traffic Controller Memory Interface Registers */
#define OMAP_FLASH_CFG_0 0xfffecc10
#define OMAP_FLASH_ACFG_0 0xfffecc50
#define OMAP_FLASH_CFG_1 0xfffecc14
#define OMAP_FLASH_ACFG_1 0xfffecc54
/*
* Configuration Registers
*/
#define PERSEUS2_CONFIG_BASE 0xfffe1000
#define PERSEUS2_IO_CONF_0 0xfffe1070
#define PERSEUS2_IO_CONF_1 0xfffe1074
#define PERSEUS2_IO_CONF_2 0xfffe1078
#define PERSEUS2_IO_CONF_3 0xfffe107c
#define PERSEUS2_IO_CONF_4 0xfffe1080
#define PERSEUS2_IO_CONF_5 0xfffe1084
#define PERSEUS2_IO_CONF_6 0xfffe1088
#define PERSEUS2_IO_CONF_7 0xfffe108c
#define PERSEUS2_IO_CONF_8 0xfffe1090
#define PERSEUS2_IO_CONF_9 0xfffe1094
#define PERSEUS2_IO_CONF_10 0xfffe1098
#define PERSEUS2_IO_CONF_11 0xfffe109c
#define PERSEUS2_IO_CONF_12 0xfffe10a0
#define PERSEUS2_IO_CONF_13 0xfffe10a4
#define PERSEUS2_MODE_1 0xfffe1010
#define PERSEUS2_MODE_2 0xfffe1014
/* CSMI specials: in terms of base + offset */
#define PERSEUS2_MODE2_OFFSET 0x14
/* DSP control: ICR registers */
#define ICR_BASE 0xfffbb800
/* M_CTL */
#define DSP_M_CTL ((volatile __u16 *)0xfffbb804)
/* DSP control: MMU registers */
#define DSP_MMU_BASE ((volatile __u16 *)0xfffed200)
/* The Ethernet Controller IRQ is cascaded to MPU_EXT_nIRQ througb the FPGA */
#define INT_ETHER INT_730_MPU_EXT_NIRQ
#define MAXIRQNUM IH_BOARD_BASE
#define MAXFIQNUM MAXIRQNUM
#define MAXSWINUM MAXIRQNUM
#define NR_IRQS (MAXIRQNUM + 1)
#ifndef __ASSEMBLY__
void fpga_write(unsigned char val, int reg);
unsigned char fpga_read(int reg);
#endif
/* PCC_UPLD control register: OMAP730 */
#define PCC_UPLD_CTRL_REG_BASE (0xfffe0900)
#define PCC_UPLD_CTRL_REG (volatile __u16 *)(PCC_UPLD_CTRL_REG_BASE + 0x00)
#else
#error "Only OMAP730 Perseus2 supported!"
#endif
#endif
...@@ -48,20 +48,60 @@ ...@@ -48,20 +48,60 @@
#define OMAP1610_DSPREG_SIZE SZ_128K #define OMAP1610_DSPREG_SIZE SZ_128K
#define OMAP1610_DSPREG_START 0xE1000000 #define OMAP1610_DSPREG_START 0xE1000000
#define OMAP_IH2_0_BASE 0xfffe0000 /*
#define OMAP_IH2_1_BASE 0xfffe0100 * ---------------------------------------------------------------------------
#define OMAP_IH2_2_BASE 0xfffe0200 * Interrupts
#define OMAP_IH2_3_BASE 0xfffe0300 * ---------------------------------------------------------------------------
*/
#define OMAP_IH2_0_BASE (0xfffe0000)
#define OMAP_IH2_1_BASE (0xfffe0100)
#define OMAP_IH2_2_BASE (0xfffe0200)
#define OMAP_IH2_3_BASE (0xfffe0300)
#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00)
#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04)
#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10)
#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14)
#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18)
#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c)
#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c)
#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00)
#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04)
#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10)
#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14)
#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18)
#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c)
#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c)
#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00)
#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04)
#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10)
#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14)
#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18)
#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c)
#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c)
#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00)
#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04)
#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10)
#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14)
#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18)
#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c)
#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c)
/* /*
* ---------------------------------------------------------------------------- * ----------------------------------------------------------------------------
* System control registers * Clocks
* ---------------------------------------------------------------------------- * ----------------------------------------------------------------------------
*/ */
#define OMAP1610_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
#define OMAP1610_RESET_CONTROL 0xfffe1140 /*
#define OMAP1610_ARM_IDLECT3 (CLKGEN_RESET_BASE + 0x24) * ----------------------------------------------------------------------------
#define OMAP1610_CONF_VOLTAGE_CTRL_0 0xfffe1060 * Pin configuration registers
* ----------------------------------------------------------------------------
*/
#define OMAP1610_CONF_VOLTAGE_VDDSHV6 (1 << 8) #define OMAP1610_CONF_VOLTAGE_VDDSHV6 (1 << 8)
#define OMAP1610_CONF_VOLTAGE_VDDSHV7 (1 << 9) #define OMAP1610_CONF_VOLTAGE_VDDSHV7 (1 << 9)
#define OMAP1610_CONF_VOLTAGE_VDDSHV8 (1 << 10) #define OMAP1610_CONF_VOLTAGE_VDDSHV8 (1 << 10)
...@@ -73,14 +113,8 @@ ...@@ -73,14 +113,8 @@
* TIPB bus interface * TIPB bus interface
* --------------------------------------------------------------------------- * ---------------------------------------------------------------------------
*/ */
#define TIPB_SWITCH_BASE (0xfffbc800)
#define OMAP1610_TIPB_SWITCH 0xfffbc800 #define OMAP1610_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160)
#define OMAP1610_TIPB_BRIDGE_INT 0xfffeca00 /* Private TIPB_CNTL */
#define OMAP1610_PRIVATE_MPU_TIPB_CNTL 0xfffeca08
#define OMAP1610_TIPB_BRIDGE_EXT 0xfffed300 /* Public (Shared) TIPB_CNTL */
#define OMAP1610_PUBLIC_MPU_TIPB_CNTL 0xfffed308
#define OMAP1610_TIPB_SWITCH_CFG OMAP_TIPB_SWITCH
#define OMAP1610_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_CFG + 0x160)
#endif /* __ASM_ARCH_OMAP1610_H */ #endif /* __ASM_ARCH_OMAP1610_H */
...@@ -49,13 +49,55 @@ ...@@ -49,13 +49,55 @@
#define OMAP5912_DSPREG_SIZE SZ_128K #define OMAP5912_DSPREG_SIZE SZ_128K
#define OMAP5912_DSPREG_START 0xE1000000 #define OMAP5912_DSPREG_START 0xE1000000
/*
* ---------------------------------------------------------------------------
* Interrupts
* ---------------------------------------------------------------------------
*/
#define OMAP_IH2_0_BASE (0xfffe0000)
#define OMAP_IH2_1_BASE (0xfffe0100)
#define OMAP_IH2_2_BASE (0xfffe0200)
#define OMAP_IH2_3_BASE (0xfffe0300)
#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00)
#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04)
#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10)
#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14)
#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18)
#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c)
#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c)
#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00)
#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04)
#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10)
#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14)
#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18)
#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c)
#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c)
#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00)
#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04)
#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10)
#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14)
#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18)
#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c)
#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c)
#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00)
#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04)
#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10)
#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14)
#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18)
#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c)
#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c)
/* /*
* ---------------------------------------------------------------------------- * ----------------------------------------------------------------------------
* System control registers * System control registers
* ---------------------------------------------------------------------------- * ----------------------------------------------------------------------------
*/ */
#define OMAP5912_ARM_IDLECT3 (CLKGEN_RESET_BASE + 0x24) #define OMAP5912_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
#endif /* __ASM_ARCH_OMAP5912_H */ #endif /* __ASM_ARCH_OMAP5912_H */
...@@ -105,8 +105,8 @@ ...@@ -105,8 +105,8 @@
* OMAP730 PCC_UPLD configuration registers * OMAP730 PCC_UPLD configuration registers
* ---------------------------------------------------------------------------- * ----------------------------------------------------------------------------
*/ */
#define OMAP730_PCC_UPLD_CTRL_REG_BASE (0xfffe0900) #define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900)
#define OMAP730_PCC_UPLD_CTRL_REG (OMAP730_PCC_UPLD_CTRL_REG_BASE + 0x00) #define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
#endif /* __ASM_ARCH_OMAP730_H */ #endif /* __ASM_ARCH_OMAP730_H */
...@@ -52,7 +52,7 @@ typedef struct { ...@@ -52,7 +52,7 @@ typedef struct {
#define mputimer_base(n) \ #define mputimer_base(n) \
((volatile mputimer_regs_t*)IO_ADDRESS(OMAP_MPUTIMER_BASE + \ ((volatile mputimer_regs_t*)IO_ADDRESS(OMAP_MPUTIMER_BASE + \
(n)*OMAP_MPUTIMER_OFF)) (n)*OMAP_MPUTIMER_OFFSET))
static inline unsigned long timer32k_read(int reg) { static inline unsigned long timer32k_read(int reg) {
unsigned long val; unsigned long val;
......
...@@ -25,7 +25,7 @@ ...@@ -25,7 +25,7 @@
#define UART_OMAP_MDR1 0x08 /* mode definition register */ #define UART_OMAP_MDR1 0x08 /* mode definition register */
#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & 0xffff #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
static void static void
puts(const char *s) puts(const char *s)
......
...@@ -13,7 +13,7 @@ ...@@ -13,7 +13,7 @@
*/ */
#include <linux/sched.h> #include <linux/sched.h>
#include <asm/errno.h> #include <asm/errno.h>
#include <asm/arch/memory.h> #include <asm/memory.h>
#include <asm/domain.h> #include <asm/domain.h>
#include <asm/system.h> #include <asm/system.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment