Commit 1b6ebdd7 authored by Candelaria Villareal, Jorge's avatar Candelaria Villareal, Jorge Committed by Mark Brown

ASoC: Zoom2: Update twl4030_setup_data parameters

Add support for EXTMUTE in Zoom2 machine driver. This is necessary
to further reduce pop noise problem. Signal EXTMUTE is connected to
signal GPIO 153 in Zoom2 board.

In addition, change ramp delay value to 3 (218/161/109 ms). With
previous ramp delay value, pop noise was louder. With a longer value
the beep tone can be observed.
Signed-off-by: default avatarJorge Eduardo Candelaria <x0107209@ti.com>
Acked-by: default avatarPeter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 4e49ffd1
......@@ -36,6 +36,7 @@
#include "../codecs/twl4030.h"
#define ZOOM2_HEADSET_MUX_GPIO (OMAP_MAX_GPIO_LINES + 15)
#define ZOOM2_HEADSET_EXTMUTE_GPIO 153
static int zoom2_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
......@@ -234,10 +235,18 @@ static struct snd_soc_card snd_soc_zoom2 = {
.num_links = ARRAY_SIZE(zoom2_dai),
};
/* EXTMUTE callback function */
void zoom2_set_hs_extmute(int mute)
{
gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
}
/* twl4030 setup */
static struct twl4030_setup_data twl4030_setup = {
.ramp_delay_value = 2, /* 81 ms */
.ramp_delay_value = 3, /* 161 ms */
.sysclk = 26000,
.hs_extmute = 1,
.set_hs_extmute = zoom2_set_hs_extmute,
};
/* Audio subsystem */
......@@ -277,6 +286,9 @@ static int __init zoom2_soc_init(void)
BUG_ON(gpio_request(ZOOM2_HEADSET_MUX_GPIO, "hs_mux") < 0);
gpio_direction_output(ZOOM2_HEADSET_MUX_GPIO, 0);
BUG_ON(gpio_request(ZOOM2_HEADSET_EXTMUTE_GPIO, "ext_mute") < 0);
gpio_direction_output(ZOOM2_HEADSET_EXTMUTE_GPIO, 0);
return 0;
err1:
......@@ -290,6 +302,7 @@ module_init(zoom2_soc_init);
static void __exit zoom2_soc_exit(void)
{
gpio_free(ZOOM2_HEADSET_MUX_GPIO);
gpio_free(ZOOM2_HEADSET_EXTMUTE_GPIO);
platform_device_unregister(zoom2_snd_device);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment