fs/Kconfig: move fat out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig

@@ -132,103 +132,7 @@ endif # BLOCK
 if BLOCK
 menu "DOS/FAT/NT Filesystems"
 
-config FAT_FS
-	tristate
-	select NLS
-	help
-	  If you want to use one of the FAT-based file systems (the MS-DOS and
-	  VFAT (Windows 95) file systems), then you must say Y or M here
-	  to include FAT support. You will then be able to mount partitions or
-	  diskettes with FAT-based file systems and transparently access the
-	  files on them, i.e. MSDOS files will look and behave just like all
-	  other Unix files.
-
-	  This FAT support is not a file system in itself, it only provides
-	  the foundation for the other file systems. You will have to say Y or
-	  M to at least one of "MSDOS fs support" or "VFAT fs support" in
-	  order to make use of it.
-
-	  Another way to read and write MSDOS floppies and hard drive
-	  partitions from within Linux (but not transparently) is with the
-	  mtools ("man mtools") program suite. You don't need to say Y here in
-	  order to do that.
-
-	  If you need to move large files on floppies between a DOS and a
-	  Linux box, say Y here, mount the floppy under Linux with an MSDOS
-	  file system and use GNU tar's M option. GNU tar is a program
-	  available for Unix and DOS ("man tar" or "info tar").
-
-	  The FAT support will enlarge your kernel by about 37 KB. If unsure,
-	  say Y.
-
-	  To compile this as a module, choose M here: the module will be called
-	  fat.  Note that if you compile the FAT support as a module, you
-	  cannot compile any of the FAT-based file systems into the kernel
-	  -- they will have to be modules as well.
-
-config MSDOS_FS
-	tristate "MSDOS fs support"
-	select FAT_FS
-	help
-	  This allows you to mount MSDOS partitions of your hard drive (unless
-	  they are compressed; to access compressed MSDOS partitions under
-	  Linux, you can either use the DOS emulator DOSEMU, described in the
-	  DOSEMU-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
-	  <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
-	  intend to use dosemu with a non-compressed MSDOS partition, say Y
-	  here) and MSDOS floppies. This means that file access becomes
-	  transparent, i.e. the MSDOS files look and behave just like all
-	  other Unix files.
-
-	  If you have Windows 95 or Windows NT installed on your MSDOS
-	  partitions, you should use the VFAT file system (say Y to "VFAT fs
-	  support" below), or you will not be able to see the long filenames
-	  generated by Windows 95 / Windows NT.
-
-	  This option will enlarge your kernel by about 7 KB. If unsure,
-	  answer Y. This will only work if you said Y to "DOS FAT fs support"
-	  as well. To compile this as a module, choose M here: the module will
-	  be called msdos.
-
-config VFAT_FS
-	tristate "VFAT (Windows-95) fs support"
-	select FAT_FS
-	help
-	  This option provides support for normal Windows file systems with
-	  long filenames.  That includes non-compressed FAT-based file systems
-	  used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
-	  programs from the mtools package.
-
-	  The VFAT support enlarges your kernel by about 10 KB and it only
-	  works if you said Y to the "DOS FAT fs support" above.  Please read
-	  the file <file:Documentation/filesystems/vfat.txt> for details.  If
-	  unsure, say Y.
-
-	  To compile this as a module, choose M here: the module will be called
-	  vfat.
-
-config FAT_DEFAULT_CODEPAGE
-	int "Default codepage for FAT"
-	depends on MSDOS_FS || VFAT_FS
-	default 437
-	help
-	  This option should be set to the codepage of your FAT filesystems.
-	  It can be overridden with the "codepage" mount option.
-	  See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config FAT_DEFAULT_IOCHARSET
-	string "Default iocharset for FAT"
-	depends on VFAT_FS
-	default "iso8859-1"
-	help
-	  Set this to the default input/output character set you'd
-	  like FAT to use. It should probably match the character set
-	  that most of your FAT filesystems use, and can be overridden
-	  with the "iocharset" mount option for FAT filesystems.
-	  Note that "utf8" is not recommended for FAT filesystems.
-	  If unsure, you shouldn't set "utf8" here.
-	  See <file:Documentation/filesystems/vfat.txt> for more information.
+source "fs/fat/Kconfig"
 
 config NTFS_FS
 	tristate "NTFS file system support"

fs/fat/Kconfig

+config FAT_FS
+	tristate
+	select NLS
+	help
+	  If you want to use one of the FAT-based file systems (the MS-DOS and
+	  VFAT (Windows 95) file systems), then you must say Y or M here
+	  to include FAT support. You will then be able to mount partitions or
+	  diskettes with FAT-based file systems and transparently access the
+	  files on them, i.e. MSDOS files will look and behave just like all
+	  other Unix files.
+
+	  This FAT support is not a file system in itself, it only provides
+	  the foundation for the other file systems. You will have to say Y or
+	  M to at least one of "MSDOS fs support" or "VFAT fs support" in
+	  order to make use of it.
+
+	  Another way to read and write MSDOS floppies and hard drive
+	  partitions from within Linux (but not transparently) is with the
+	  mtools ("man mtools") program suite. You don't need to say Y here in
+	  order to do that.
+
+	  If you need to move large files on floppies between a DOS and a
+	  Linux box, say Y here, mount the floppy under Linux with an MSDOS
+	  file system and use GNU tar's M option. GNU tar is a program
+	  available for Unix and DOS ("man tar" or "info tar").
+
+	  The FAT support will enlarge your kernel by about 37 KB. If unsure,
+	  say Y.
+
+	  To compile this as a module, choose M here: the module will be called
+	  fat.  Note that if you compile the FAT support as a module, you
+	  cannot compile any of the FAT-based file systems into the kernel
+	  -- they will have to be modules as well.
+
+config MSDOS_FS
+	tristate "MSDOS fs support"
+	select FAT_FS
+	help
+	  This allows you to mount MSDOS partitions of your hard drive (unless
+	  they are compressed; to access compressed MSDOS partitions under
+	  Linux, you can either use the DOS emulator DOSEMU, described in the
+	  DOSEMU-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
+	  <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
+	  intend to use dosemu with a non-compressed MSDOS partition, say Y
+	  here) and MSDOS floppies. This means that file access becomes
+	  transparent, i.e. the MSDOS files look and behave just like all
+	  other Unix files.
+
+	  If you have Windows 95 or Windows NT installed on your MSDOS
+	  partitions, you should use the VFAT file system (say Y to "VFAT fs
+	  support" below), or you will not be able to see the long filenames
+	  generated by Windows 95 / Windows NT.
+
+	  This option will enlarge your kernel by about 7 KB. If unsure,
+	  answer Y. This will only work if you said Y to "DOS FAT fs support"
+	  as well. To compile this as a module, choose M here: the module will
+	  be called msdos.
+
+config VFAT_FS
+	tristate "VFAT (Windows-95) fs support"
+	select FAT_FS
+	help
+	  This option provides support for normal Windows file systems with
+	  long filenames.  That includes non-compressed FAT-based file systems
+	  used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
+	  programs from the mtools package.
+
+	  The VFAT support enlarges your kernel by about 10 KB and it only
+	  works if you said Y to the "DOS FAT fs support" above.  Please read
+	  the file <file:Documentation/filesystems/vfat.txt> for details.  If
+	  unsure, say Y.
+
+	  To compile this as a module, choose M here: the module will be called
+	  vfat.
+
+config FAT_DEFAULT_CODEPAGE
+	int "Default codepage for FAT"
+	depends on MSDOS_FS || VFAT_FS
+	default 437
+	help
+	  This option should be set to the codepage of your FAT filesystems.
+	  It can be overridden with the "codepage" mount option.
+	  See <file:Documentation/filesystems/vfat.txt> for more information.
+
+config FAT_DEFAULT_IOCHARSET
+	string "Default iocharset for FAT"
+	depends on VFAT_FS
+	default "iso8859-1"
+	help
+	  Set this to the default input/output character set you'd
+	  like FAT to use. It should probably match the character set
+	  that most of your FAT filesystems use, and can be overridden
+	  with the "iocharset" mount option for FAT filesystems.
+	  Note that "utf8" is not recommended for FAT filesystems.
+	  If unsure, you shouldn't set "utf8" here.
+	  See <file:Documentation/filesystems/vfat.txt> for more information.