Commit 1d7fadc5 authored by Akinobu Mita's avatar Akinobu Mita Committed by Greg Kroah-Hartman

iio: adc: ti-ads1015: fix incorrect data rate setting update

commit 0d106b74 upstream.

The ti-ads1015 driver has eight iio voltage channels and each iio channel
can hold own sampling frequency information.

The ADS1015 device only have a single config register which contains an
input multiplexer selection, PGA and data rate settings.  So the driver
should load the correct settings when the input multiplexer selection is
changed.

However, regardless of which channlel is currently selected, changing any
iio channel's sampling frequency information immediately overwrites the
current data rate setting in the config register.

It breaks the current data rate setting if the different channel's sampling
frequency information is changed because the data rate setting is not
reloaded when the input multiplexer is switched.

This removes the unexpected config register update and correctly load the
data rate setting before getting adc result.

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 70bfcf9e
...@@ -252,9 +252,11 @@ int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val) ...@@ -252,9 +252,11 @@ int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val)
ret = regmap_update_bits_check(data->regmap, ADS1015_CFG_REG, ret = regmap_update_bits_check(data->regmap, ADS1015_CFG_REG,
ADS1015_CFG_MUX_MASK | ADS1015_CFG_MUX_MASK |
ADS1015_CFG_PGA_MASK, ADS1015_CFG_PGA_MASK |
ADS1015_CFG_DR_MASK,
chan << ADS1015_CFG_MUX_SHIFT | chan << ADS1015_CFG_MUX_SHIFT |
pga << ADS1015_CFG_PGA_SHIFT, pga << ADS1015_CFG_PGA_SHIFT |
dr << ADS1015_CFG_DR_SHIFT,
&change); &change);
if (ret < 0) if (ret < 0)
return ret; return ret;
...@@ -325,25 +327,16 @@ static int ads1015_set_scale(struct ads1015_data *data, int chan, ...@@ -325,25 +327,16 @@ static int ads1015_set_scale(struct ads1015_data *data, int chan,
static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate) static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate)
{ {
int i, ret, rindex = -1; int i;
for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++) for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++) {
if (data->data_rate[i] == rate) { if (data->data_rate[i] == rate) {
rindex = i; data->channel_data[chan].data_rate = i;
break; return 0;
}
} }
if (rindex < 0)
return -EINVAL;
ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
ADS1015_CFG_DR_MASK,
rindex << ADS1015_CFG_DR_SHIFT);
if (ret < 0)
return ret;
data->channel_data[chan].data_rate = rindex;
return 0; return -EINVAL;
} }
static int ads1015_read_raw(struct iio_dev *indio_dev, static int ads1015_read_raw(struct iio_dev *indio_dev,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment