Commit 1dbae815 authored by Tony Lindgren's avatar Tony Lindgren Committed by Russell King

[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx

Patch from Tony Lindgren

This patch adds support for omap24xx series of processors.
The files live in arch/arm/mach-omap2, and share common
files with omap15xx and omap16xx processors in
arch/arm/plat-omap.

Omap24xx support was originally added for 2.6.9 by TI.
This code was then improved and integrated to share common
code with omap15xx and omap16xx processors by various
omap developers, such as Paul Mundt, Juha Yrjola, Imre Deak,
Tony Lindgren, Richard Woodruff, Nishant Menon, Komal Shah
et al.
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 1a8bfa1e
......@@ -239,6 +239,8 @@ source "arch/arm/plat-omap/Kconfig"
source "arch/arm/mach-omap1/Kconfig"
source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-lh7a40x/Kconfig"
......
......@@ -93,6 +93,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_IXP2000) := ixp2000
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
incdir-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410
machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
......
comment "OMAP Core Type"
depends on ARCH_OMAP2
config ARCH_OMAP24XX
bool "OMAP24xx Based System"
depends on ARCH_OMAP2
config ARCH_OMAP2420
bool "OMAP2420 support"
depends on ARCH_OMAP24XX
comment "OMAP Board Type"
depends on ARCH_OMAP2
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
config MACH_OMAP_H4
bool "OMAP 2420 H4 board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
#
# Makefile for the linux kernel.
#
# Common support
obj-y := irq.o id.o io.o sram-fn.o clock.o mux.o devices.o serial.o
obj-$(CONFIG_OMAP_MPU_TIMER) += timer-gp.o
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
zreladdr-y := 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x80800000
/*
* linux/arch/arm/mach-omap/omap2/board-generic.c
*
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
* Modified from mach-omap/omap1/board-generic.c
*
* Code for generic OMAP2 board. Should work on many OMAP2 systems where
* the bootloader passes the board-specific data to the kernel.
* Do not put any board specific code to this file; create a new machine
* type if you need custom low-level initializations.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
#include <asm/arch/board.h>
#include <asm/arch/common.h>
static void __init omap_generic_init_irq(void)
{
omap_init_irq();
}
static struct omap_uart_config generic_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_mmc_config generic_mmc_config __initdata = {
.mmc [0] = {
.enabled = 0,
.wire4 = 0,
.wp_pin = -1,
.power_pin = -1,
.switch_pin = -1,
},
};
static struct omap_board_config_kernel generic_config[] = {
{ OMAP_TAG_UART, &generic_uart_config },
{ OMAP_TAG_MMC, &generic_mmc_config },
};
static void __init omap_generic_init(void)
{
omap_board_config = generic_config;
omap_board_config_size = ARRAY_SIZE(generic_config);
omap_serial_init();
}
static void __init omap_generic_map_io(void)
{
omap_map_common_io();
}
MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
.phys_ram = 0x80000000,
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_generic_map_io,
.init_irq = omap_generic_init_irq,
.init_machine = omap_generic_init,
.timer = &omap_timer,
MACHINE_END
/*
* linux/arch/arm/mach-omap/omap2/board-h4.c
*
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
* Modified from mach-omap/omap1/board-generic.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
#include <asm/arch/board.h>
#include <asm/arch/common.h>
#include <asm/arch/prcm.h>
#include <asm/io.h>
#include <asm/delay.h>
static struct mtd_partition h4_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
.offset = 0,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next sector */
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = 0,
},
/* kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M,
.mask_flags = 0
},
/* file system */
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
}
};
static struct flash_platform_data h4_flash_data = {
.map_name = "cfi_probe",
.width = 2,
.parts = h4_partitions,
.nr_parts = ARRAY_SIZE(h4_partitions),
};
static struct resource h4_flash_resource = {
.start = H4_CS0_BASE,
.end = H4_CS0_BASE + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device h4_flash_device = {
.name = "omapflash",
.id = 0,
.dev = {
.platform_data = &h4_flash_data,
},
.num_resources = 1,
.resource = &h4_flash_resource,
};
static struct resource h4_smc91x_resources[] = {
[0] = {
.start = OMAP24XX_ETHR_START, /* Physical */
.end = OMAP24XX_ETHR_START + 0xf,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device h4_smc91x_device = {
.name = "smc91x",
.id = -1,
.num_resources = ARRAY_SIZE(h4_smc91x_resources),
.resource = h4_smc91x_resources,
};
static struct platform_device *h4_devices[] __initdata = {
&h4_smc91x_device,
&h4_flash_device,
};
static inline void __init h4_init_smc91x(void)
{
/* Make sure CS1 timings are correct */
GPMC_CONFIG1_1 = 0x00011200;
GPMC_CONFIG2_1 = 0x001f1f01;
GPMC_CONFIG3_1 = 0x00080803;
GPMC_CONFIG4_1 = 0x1c091c09;
GPMC_CONFIG5_1 = 0x041f1f1f;
GPMC_CONFIG6_1 = 0x000004c4;
GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24);
udelay(100);
omap_cfg_reg(M15_24XX_GPIO92);
if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
OMAP24XX_ETHR_GPIO_IRQ);
return;
}
omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
}
static void __init omap_h4_init_irq(void)
{
omap_init_irq();
omap_gpio_init();
h4_init_smc91x();
}
static struct omap_uart_config h4_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_mmc_config h4_mmc_config __initdata = {
.mmc [0] = {
.enabled = 1,
.wire4 = 1,
.wp_pin = -1,
.power_pin = -1,
.switch_pin = -1,
},
};
static struct omap_lcd_config h4_lcd_config __initdata = {
.panel_name = "h4",
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h4_config[] = {
{ OMAP_TAG_UART, &h4_uart_config },
{ OMAP_TAG_MMC, &h4_mmc_config },
{ OMAP_TAG_LCD, &h4_lcd_config },
};
static void __init omap_h4_init(void)
{
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
* if not needed.
*/
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap_board_config = h4_config;
omap_board_config_size = ARRAY_SIZE(h4_config);
omap_serial_init();
}
static void __init omap_h4_map_io(void)
{
omap_map_common_io();
}
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
.phys_ram = 0x80000000,
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_h4_map_io,
.init_irq = omap_h4_init_irq,
.init_machine = omap_h4_init,
.timer = &omap_timer,
MACHINE_END
/*
* linux/arch/arm/mach-omap2/devices.c
*
* OMAP2 platform device setup/initialization
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/arch/tc.h>
#include <asm/arch/board.h>
#include <asm/arch/mux.h>
#include <asm/arch/gpio.h>
extern void omap_nop_release(struct device *dev);
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
#define OMAP2_I2C_BASE2 0x48072000
#define OMAP2_I2C_INT2 57
static struct resource i2c_resources2[] = {
{
.start = OMAP2_I2C_BASE2,
.end = OMAP2_I2C_BASE2 + 0x3f,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP2_I2C_INT2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device omap_i2c_device2 = {
.name = "i2c_omap",
.id = 2,
.dev = {
.release = omap_nop_release,
},
.num_resources = ARRAY_SIZE(i2c_resources2),
.resource = i2c_resources2,
};
/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */
static void omap_init_i2c(void)
{
/* REVISIT: Second I2C not in use on H4? */
if (machine_is_omap_h4())
return;
omap_cfg_reg(J15_24XX_I2C2_SCL);
omap_cfg_reg(H19_24XX_I2C2_SDA);
(void) platform_device_register(&omap_i2c_device2);
}
#else
static void omap_init_i2c(void) {}
#endif
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
{
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
omap_init_i2c();
return 0;
}
arch_initcall(omap2_init_devices);
/*
* linux/arch/arm/mach-omap2/id.c
*
* OMAP2 CPU identification code
*
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#define OMAP24XX_TAP_BASE io_p2v(0x48014000)
#define OMAP_TAP_IDCODE 0x0204
#define OMAP_TAP_PROD_ID 0x0208
#define OMAP_TAP_DIE_ID_0 0x0218
#define OMAP_TAP_DIE_ID_1 0x021C
#define OMAP_TAP_DIE_ID_2 0x0220
#define OMAP_TAP_DIE_ID_3 0x0224
/* system_rev fields for OMAP2 processors:
* CPU id bits [31:16],
* CPU device type [15:12], (unprg,normal,POP)
* CPU revision [11:08]
* CPU class bits [07:00]
*/
struct omap_id {
u16 hawkeye; /* Silicon type (Hawkeye id) */
u8 dev; /* Device type from production_id reg */
u32 type; /* combined type id copied to system_rev */
};
/* Register values to detect the OMAP version */
static struct omap_id omap_ids[] __initdata = {
{ .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200000 },
{ .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201000 },
{ .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202000 },
{ .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220000 },
{ .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230000 },
{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 },
};
static u32 __init read_tap_reg(int reg)
{
return __raw_readl(OMAP24XX_TAP_BASE + reg);
}
void __init omap2_check_revision(void)
{
int i, j;
u32 idcode;
u32 prod_id;
u16 hawkeye;
u8 dev_type;
u8 rev;
idcode = read_tap_reg(OMAP_TAP_IDCODE);
prod_id = read_tap_reg(OMAP_TAP_PROD_ID);
hawkeye = (idcode >> 12) & 0xffff;
rev = (idcode >> 28) & 0x0f;
dev_type = (prod_id >> 16) & 0x0f;
#ifdef DEBUG
printk(KERN_DEBUG "OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
printk(KERN_DEBUG "OMAP_TAP_DIE_ID_0: 0x%08x\n",
read_tap_reg(OMAP_TAP_DIE_ID_0));
printk(KERN_DEBUG "OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
read_tap_reg(OMAP_TAP_DIE_ID_1),
(read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
printk(KERN_DEBUG "OMAP_TAP_DIE_ID_2: 0x%08x\n",
read_tap_reg(OMAP_TAP_DIE_ID_2));
printk(KERN_DEBUG "OMAP_TAP_DIE_ID_3: 0x%08x\n",
read_tap_reg(OMAP_TAP_DIE_ID_3));
printk(KERN_DEBUG "OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
prod_id, dev_type);
#endif
/* Check hawkeye ids */
for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
if (hawkeye == omap_ids[i].hawkeye)
break;
}
if (i == ARRAY_SIZE(omap_ids)) {
printk(KERN_ERR "Unknown OMAP CPU id\n");
return;
}
for (j = i; j < ARRAY_SIZE(omap_ids); j++) {
if (dev_type == omap_ids[j].dev)
break;
}
if (j == ARRAY_SIZE(omap_ids)) {
printk(KERN_ERR "Unknown OMAP device type. "
"Handling it as OMAP%04x\n",
omap_ids[i].type >> 16);
j = i;
}
system_rev = omap_ids[j].type;
system_rev |= rev << 8;
/* Add the cpu class info (24xx) */
system_rev |= 0x24;
pr_info("OMAP%04x", system_rev >> 16);
if ((system_rev >> 8) & 0x0f)
printk("%x", (system_rev >> 8) & 0x0f);
printk("\n");
}
/*
* linux/arch/arm/mach-omap2/io.c
*
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
* Author: Juha Yrjl <juha.yrjola@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/mach/map.h>
#include <asm/io.h>
#include <asm/arch/mux.h>
extern void omap_sram_init(void);
extern int omap2_clk_init(void);
extern void omap2_check_revision(void);
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
static struct map_desc omap2_io_desc[] __initdata = {
{
.virtual = L3_24XX_VIRT,
.pfn = __phys_to_pfn(L3_24XX_PHYS),
.length = L3_24XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_24XX_VIRT,
.pfn = __phys_to_pfn(L4_24XX_PHYS),
.length = L4_24XX_SIZE,
.type = MT_DEVICE
}
};
void __init omap_map_common_io(void)
{
iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc));
omap2_check_revision();
omap_sram_init();
omap2_mux_init();
omap2_clk_init();
}
/*
* linux/arch/arm/mach-omap/omap2/irq.c
*
* Interrupt handler for OMAP2 boards.
*
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/config.h>
#include <linux/interrupt.h>
#include <asm/hardware.h>
#include <asm/mach/irq.h>
#include <asm/irq.h>
#include <asm/io.h>
#define INTC_REVISION 0x0000
#define INTC_SYSCONFIG 0x0010
#define INTC_SYSSTATUS 0x0014
#define INTC_CONTROL 0x0048
#define INTC_MIR_CLEAR0 0x0088
#define INTC_MIR_SET0 0x008c
/*
* OMAP2 has a number of different interrupt controllers, each interrupt
* controller is identified as its own "bank". Register definitions are
* fairly consistent for each bank, but not all registers are implemented
* for each bank.. when in doubt, consult the TRM.
*/
static struct omap_irq_bank {
unsigned long base_reg;
unsigned int nr_irqs;
} __attribute__ ((aligned(4))) irq_banks[] = {
{
/* MPU INTC */
.base_reg = OMAP24XX_IC_BASE,
.nr_irqs = 96,
}, {
/* XXX: DSP INTC */
#if 0
/*
* Commented out for now until we fix the IVA clocking
*/
#ifdef CONFIG_ARCH_OMAP2420
}, {
/* IVA INTC (2420 only) */
.base_reg = OMAP24XX_IVA_INTC_BASE,
.nr_irqs = 16, /* Actually 32, but only 16 are used */
#endif
#endif
}
};
/* XXX: FIQ and additional INTC support (only MPU at the moment) */
static void omap_ack_irq(unsigned int irq)
{
omap_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL);
}
static void omap_mask_irq(unsigned int irq)
{
int offset = (irq >> 5) << 5;
if (irq >= 64) {
irq %= 64;
} else if (irq >= 32) {
irq %= 32;
}
omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset);
}
static void omap_unmask_irq(unsigned int irq)
{
int offset = (irq >> 5) << 5;
if (irq >= 64) {
irq %= 64;
} else if (irq >= 32) {
irq %= 32;
}
omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset);
}
static void omap_mask_ack_irq(unsigned int irq)
{
omap_mask_irq(irq);
omap_ack_irq(irq);
}
static struct irqchip omap_irq_chip = {
.ack = omap_mask_ack_irq,
.mask = omap_mask_irq,
.unmask = omap_unmask_irq,
};
static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
{
unsigned long tmp;
tmp = omap_readl(bank->base_reg + INTC_REVISION) & 0xff;
printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx "
"(revision %ld.%ld) with %d interrupts\n",
bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
tmp = omap_readl(bank->base_reg + INTC_SYSCONFIG);
tmp |= 1 << 1; /* soft reset */
omap_writel(tmp, bank->base_reg + INTC_SYSCONFIG);
while (!(omap_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1))
/* Wait for reset to complete */;
}
void __init omap_init_irq(void)
{
unsigned long nr_irqs = 0;
unsigned int nr_banks = 0;
int i;
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
struct omap_irq_bank *bank = irq_banks + i;
/* XXX */
if (!bank->base_reg)
continue;
omap_irq_bank_init_one(bank);
nr_irqs += bank->nr_irqs;
nr_banks++;
}
printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n",
nr_irqs, nr_banks, nr_banks > 1 ? "s" : "");
for (i = 0; i < nr_irqs; i++) {
set_irq_chip(i, &omap_irq_chip);
set_irq_handler(i, do_level_IRQ);
set_irq_flags(i, IRQF_VALID);
}
}
/*
* linux/arch/arm/mach-omap2/mux.c
*
* OMAP1 pin multiplexing configurations
*
* Copyright (C) 2003 - 2005 Nokia Corporation
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <asm/system.h>
#include <asm/io.h>
#include <linux/spinlock.h>
#include <asm/arch/mux.h>
#ifdef CONFIG_OMAP_MUX
/* NOTE: See mux.h for the enumeration */
struct pin_config __initdata_or_module omap24xx_pins[] = {
/*
* description mux mux pull pull debug
* offset mode ena type
*/
/* 24xx I2C */
MUX_CFG_24XX("M19_24XX_I2C1_SCL", 0x111, 0, 0, 0, 1)
MUX_CFG_24XX("L15_24XX_I2C1_SDA", 0x112, 0, 0, 0, 1)
MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 0, 1)
MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1)
/* Menelaus interrupt */
MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1)
/* 24xx GPIO */
MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1)
MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1)
};
int __init omap2_mux_init(void)
{
omap_mux_register(omap24xx_pins, ARRAY_SIZE(omap24xx_pins));
return 0;
}
#endif
/*
* prcm.h - Access definations for use in OMAP24XX clock and power management
*
* Copyright (C) 2005 Texas Instruments, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
#define __ASM_ARM_ARCH_DPM_PRCM_H
/* SET_PERFORMANCE_LEVEL PARAMETERS */
#define PRCM_HALF_SPEED 1
#define PRCM_FULL_SPEED 2
#ifndef __ASSEMBLER__
#define PRCM_REG32(offset) __REG32(OMAP24XX_PRCM_BASE + (offset))
#define PRCM_REVISION PRCM_REG32(0x000)
#define PRCM_SYSCONFIG PRCM_REG32(0x010)
#define PRCM_IRQSTATUS_MPU PRCM_REG32(0x018)
#define PRCM_IRQENABLE_MPU PRCM_REG32(0x01C)
#define PRCM_VOLTCTRL PRCM_REG32(0x050)
#define PRCM_VOLTST PRCM_REG32(0x054)
#define PRCM_CLKSRC_CTRL PRCM_REG32(0x060)
#define PRCM_CLKOUT_CTRL PRCM_REG32(0x070)
#define PRCM_CLKEMUL_CTRL PRCM_REG32(0x078)
#define PRCM_CLKCFG_CTRL PRCM_REG32(0x080)
#define PRCM_CLKCFG_STATUS PRCM_REG32(0x084)
#define PRCM_VOLTSETUP PRCM_REG32(0x090)
#define PRCM_CLKSSETUP PRCM_REG32(0x094)
#define PRCM_POLCTRL PRCM_REG32(0x098)
/* GENERAL PURPOSE */
#define GENERAL_PURPOSE1 PRCM_REG32(0x0B0)
#define GENERAL_PURPOSE2 PRCM_REG32(0x0B4)
#define GENERAL_PURPOSE3 PRCM_REG32(0x0B8)
#define GENERAL_PURPOSE4 PRCM_REG32(0x0BC)
#define GENERAL_PURPOSE5 PRCM_REG32(0x0C0)
#define GENERAL_PURPOSE6 PRCM_REG32(0x0C4)
#define GENERAL_PURPOSE7 PRCM_REG32(0x0C8)
#define GENERAL_PURPOSE8 PRCM_REG32(0x0CC)
#define GENERAL_PURPOSE9 PRCM_REG32(0x0D0)
#define GENERAL_PURPOSE10 PRCM_REG32(0x0D4)
#define GENERAL_PURPOSE11 PRCM_REG32(0x0D8)
#define GENERAL_PURPOSE12 PRCM_REG32(0x0DC)
#define GENERAL_PURPOSE13 PRCM_REG32(0x0E0)
#define GENERAL_PURPOSE14 PRCM_REG32(0x0E4)
#define GENERAL_PURPOSE15 PRCM_REG32(0x0E8)
#define GENERAL_PURPOSE16 PRCM_REG32(0x0EC)
#define GENERAL_PURPOSE17 PRCM_REG32(0x0F0)
#define GENERAL_PURPOSE18 PRCM_REG32(0x0F4)
#define GENERAL_PURPOSE19 PRCM_REG32(0x0F8)
#define GENERAL_PURPOSE20 PRCM_REG32(0x0FC)
/* MPU */
#define CM_CLKSEL_MPU PRCM_REG32(0x140)
#define CM_CLKSTCTRL_MPU PRCM_REG32(0x148)
#define RM_RSTST_MPU PRCM_REG32(0x158)
#define PM_WKDEP_MPU PRCM_REG32(0x1C8)
#define PM_EVGENCTRL_MPU PRCM_REG32(0x1D4)
#define PM_EVEGENONTIM_MPU PRCM_REG32(0x1D8)
#define PM_EVEGENOFFTIM_MPU PRCM_REG32(0x1DC)
#define PM_PWSTCTRL_MPU PRCM_REG32(0x1E0)
#define PM_PWSTST_MPU PRCM_REG32(0x1E4)
/* CORE */
#define CM_FCLKEN1_CORE PRCM_REG32(0x200)
#define CM_FCLKEN2_CORE PRCM_REG32(0x204)
#define CM_FCLKEN3_CORE PRCM_REG32(0x208)
#define CM_ICLKEN1_CORE PRCM_REG32(0x210)
#define CM_ICLKEN2_CORE PRCM_REG32(0x214)
#define CM_ICLKEN3_CORE PRCM_REG32(0x218)
#define CM_ICLKEN4_CORE PRCM_REG32(0x21C)
#define CM_IDLEST1_CORE PRCM_REG32(0x220)
#define CM_IDLEST2_CORE PRCM_REG32(0x224)
#define CM_IDLEST3_CORE PRCM_REG32(0x228)
#define CM_IDLEST4_CORE PRCM_REG32(0x22C)
#define CM_AUTOIDLE1_CORE PRCM_REG32(0x230)
#define CM_AUTOIDLE2_CORE PRCM_REG32(0x234)
#define CM_AUTOIDLE3_CORE PRCM_REG32(0x238)
#define CM_AUTOIDLE4_CORE PRCM_REG32(0x23C)
#define CM_CLKSEL1_CORE PRCM_REG32(0x240)
#define CM_CLKSEL2_CORE PRCM_REG32(0x244)
#define CM_CLKSTCTRL_CORE PRCM_REG32(0x248)
#define PM_WKEN1_CORE PRCM_REG32(0x2A0)
#define PM_WKEN2_CORE PRCM_REG32(0x2A4)
#define PM_WKST1_CORE PRCM_REG32(0x2B0)
#define PM_WKST2_CORE PRCM_REG32(0x2B4)
#define PM_WKDEP_CORE PRCM_REG32(0x2C8)
#define PM_PWSTCTRL_CORE PRCM_REG32(0x2E0)
#define PM_PWSTST_CORE PRCM_REG32(0x2E4)
/* GFX */
#define CM_FCLKEN_GFX PRCM_REG32(0x300)
#define CM_ICLKEN_GFX PRCM_REG32(0x310)
#define CM_IDLEST_GFX PRCM_REG32(0x320)
#define CM_CLKSEL_GFX PRCM_REG32(0x340)
#define CM_CLKSTCTRL_GFX PRCM_REG32(0x348)
#define RM_RSTCTRL_GFX PRCM_REG32(0x350)
#define RM_RSTST_GFX PRCM_REG32(0x358)
#define PM_WKDEP_GFX PRCM_REG32(0x3C8)
#define PM_PWSTCTRL_GFX PRCM_REG32(0x3E0)
#define PM_PWSTST_GFX PRCM_REG32(0x3E4)
/* WAKE-UP */
#define CM_FCLKEN_WKUP PRCM_REG32(0x400)
#define CM_ICLKEN_WKUP PRCM_REG32(0x410)
#define CM_IDLEST_WKUP PRCM_REG32(0x420)
#define CM_AUTOIDLE_WKUP PRCM_REG32(0x430)
#define CM_CLKSEL_WKUP PRCM_REG32(0x440)
#define RM_RSTCTRL_WKUP PRCM_REG32(0x450)
#define RM_RSTTIME_WKUP PRCM_REG32(0x454)
#define RM_RSTST_WKUP PRCM_REG32(0x458)
#define PM_WKEN_WKUP PRCM_REG32(0x4A0)
#define PM_WKST_WKUP PRCM_REG32(0x4B0)
/* CLOCKS */
#define CM_CLKEN_PLL PRCM_REG32(0x500)
#define CM_IDLEST_CKGEN PRCM_REG32(0x520)
#define CM_AUTOIDLE_PLL PRCM_REG32(0x530)
#define CM_CLKSEL1_PLL PRCM_REG32(0x540)
#define CM_CLKSEL2_PLL PRCM_REG32(0x544)
/* DSP */
#define CM_FCLKEN_DSP PRCM_REG32(0x800)
#define CM_ICLKEN_DSP PRCM_REG32(0x810)
#define CM_IDLEST_DSP PRCM_REG32(0x820)
#define CM_AUTOIDLE_DSP PRCM_REG32(0x830)
#define CM_CLKSEL_DSP PRCM_REG32(0x840)
#define CM_CLKSTCTRL_DSP PRCM_REG32(0x848)
#define RM_RSTCTRL_DSP PRCM_REG32(0x850)
#define RM_RSTST_DSP PRCM_REG32(0x858)
#define PM_WKEN_DSP PRCM_REG32(0x8A0)
#define PM_WKDEP_DSP PRCM_REG32(0x8C8)
#define PM_PWSTCTRL_DSP PRCM_REG32(0x8E0)
#define PM_PWSTST_DSP PRCM_REG32(0x8E4)
#define PRCM_IRQSTATUS_DSP PRCM_REG32(0x8F0)
#define PRCM_IRQENABLE_DSP PRCM_REG32(0x8F4)
/* IVA */
#define PRCM_IRQSTATUS_IVA PRCM_REG32(0x8F8)
#define PRCM_IRQENABLE_IVA PRCM_REG32(0x8FC)
/* Modem on 2430 */
#define CM_FCLKEN_MDM PRCM_REG32(0xC00)
#define CM_ICLKEN_MDM PRCM_REG32(0xC10)
#define CM_IDLEST_MDM PRCM_REG32(0xC20)
#define CM_CLKSEL_MDM PRCM_REG32(0xC40)
/* FIXME: Move to header for 2430 */
#define DISP_BASE (OMAP24XX_L4_IO_BASE+0x50000)
#define DISP_REG32(offset) __REG32(DISP_BASE + (offset))
#define GPMC_BASE (OMAP24XX_GPMC_BASE)
#define GPMC_REG32(offset) __REG32(GPMC_BASE + (offset))
#define GPT1_BASE (OMAP24XX_GPT1)
#define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset))
/* Misc sysconfig */
#define DISPC_SYSCONFIG DISP_REG32(0x410)
#define SPI_BASE (OMAP24XX_L4_IO_BASE+0x98000)
#define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10)
#define MCSPI2_SYSCONFIG __REG32(SPI_BASE+0x2000 + 0x10)
//#define DSP_MMU_SYSCONFIG 0x5A000010
#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE+0x2C10)
//#define IVA_MMU_SYSCONFIG 0x5D000010
//#define DSP_DMA_SYSCONFIG 0x00FCC02C
#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE+0x282C)
#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE+0x602C)
#define GPMC_SYSCONFIG GPMC_REG32(0x010)
#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x94010)
#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6A054)
#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6C054)
#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6E054)
//#define IVA_SYSCONFIG 0x5C060010
#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE+0x10)
#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE+0x10)
#define SSI_SYSCONFIG __REG32(DISP_BASE+0x8010)
//#define VLYNQ_SYSCONFIG 0x67FFFE10
/* rkw - good cannidates for PM_ to start what nm was trying */
#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000)
#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000)
#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000)
#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000)
#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000)
#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000)
#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000)
#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000)
#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000)
#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000)
#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000)
#define GPTIMER1_SYSCONFIG GPT1_REG32(0x010)
#define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10)
#define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10)
#define GPTIMER4_SYSCONFIG __REG32(OMAP24XX_GPT4 + 0x10)
#define GPTIMER5_SYSCONFIG __REG32(OMAP24XX_GPT5 + 0x10)
#define GPTIMER6_SYSCONFIG __REG32(OMAP24XX_GPT6 + 0x10)
#define GPTIMER7_SYSCONFIG __REG32(OMAP24XX_GPT7 + 0x10)
#define GPTIMER8_SYSCONFIG __REG32(OMAP24XX_GPT8 + 0x10)
#define GPTIMER9_SYSCONFIG __REG32(OMAP24XX_GPT9 + 0x10)
#define GPTIMER10_SYSCONFIG __REG32(OMAP24XX_GPT10 + 0x10)
#define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10)
#define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10)
#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE+(0x2000*((X)-1)))
#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1)+0x10))
#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2)+0x10))
#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3)+0x10))
#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4)+0x10))
/* GP TIMER 1 */
#define GPTIMER1_TISTAT GPT1_REG32(0x014)
#define GPTIMER1_TISR GPT1_REG32(0x018)
#define GPTIMER1_TIER GPT1_REG32(0x01C)
#define GPTIMER1_TWER GPT1_REG32(0x020)
#define GPTIMER1_TCLR GPT1_REG32(0x024)
#define GPTIMER1_TCRR GPT1_REG32(0x028)
#define GPTIMER1_TLDR GPT1_REG32(0x02C)
#define GPTIMER1_TTGR GPT1_REG32(0x030)
#define GPTIMER1_TWPS GPT1_REG32(0x034)
#define GPTIMER1_TMAR GPT1_REG32(0x038)
#define GPTIMER1_TCAR1 GPT1_REG32(0x03C)
#define GPTIMER1_TSICR GPT1_REG32(0x040)
#define GPTIMER1_TCAR2 GPT1_REG32(0x044)
/* rkw -- base fix up please... */
#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE+0x78018)
/* SDRC */
#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE+0x060)
#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE+0x064)
#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE+0x068)
#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE+0x06C)
#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE+0x070)
#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE+0x084)
/* GPIO 1 */
#define GPIO1_BASE GPIOX_BASE(1)
#define GPIO1_REG32(offset) __REG32(GPIO1_BASE + (offset))
#define GPIO1_IRQENABLE1 GPIO1_REG32(0x01C)
#define GPIO1_IRQSTATUS1 GPIO1_REG32(0x018)
#define GPIO1_IRQENABLE2 GPIO1_REG32(0x02C)
#define GPIO1_IRQSTATUS2 GPIO1_REG32(0x028)
#define GPIO1_WAKEUPENABLE GPIO1_REG32(0x020)
#define GPIO1_RISINGDETECT GPIO1_REG32(0x048)
#define GPIO1_DATAIN GPIO1_REG32(0x038)
#define GPIO1_OE GPIO1_REG32(0x034)
#define GPIO1_DATAOUT GPIO1_REG32(0x03C)
/* GPIO2 */
#define GPIO2_BASE GPIOX_BASE(2)
#define GPIO2_REG32(offset) __REG32(GPIO2_BASE + (offset))
#define GPIO2_IRQENABLE1 GPIO2_REG32(0x01C)
#define GPIO2_IRQSTATUS1 GPIO2_REG32(0x018)
#define GPIO2_IRQENABLE2 GPIO2_REG32(0x02C)
#define GPIO2_IRQSTATUS2 GPIO2_REG32(0x028)
#define GPIO2_WAKEUPENABLE GPIO2_REG32(0x020)
#define GPIO2_RISINGDETECT GPIO2_REG32(0x048)
#define GPIO2_DATAIN GPIO2_REG32(0x038)
#define GPIO2_OE GPIO2_REG32(0x034)
#define GPIO2_DATAOUT GPIO2_REG32(0x03C)
/* GPIO 3 */
#define GPIO3_BASE GPIOX_BASE(3)
#define GPIO3_REG32(offset) __REG32(GPIO3_BASE + (offset))
#define GPIO3_IRQENABLE1 GPIO3_REG32(0x01C)
#define GPIO3_IRQSTATUS1 GPIO3_REG32(0x018)
#define GPIO3_IRQENABLE2 GPIO3_REG32(0x02C)
#define GPIO3_IRQSTATUS2 GPIO3_REG32(0x028)
#define GPIO3_WAKEUPENABLE GPIO3_REG32(0x020)
#define GPIO3_RISINGDETECT GPIO3_REG32(0x048)
#define GPIO3_FALLINGDETECT GPIO3_REG32(0x04C)
#define GPIO3_DATAIN GPIO3_REG32(0x038)
#define GPIO3_OE GPIO3_REG32(0x034)
#define GPIO3_DATAOUT GPIO3_REG32(0x03C)
#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050)
#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054)
/* GPIO 4 */
#define GPIO4_BASE GPIOX_BASE(4)
#define GPIO4_REG32(offset) __REG32(GPIO4_BASE + (offset))
#define GPIO4_IRQENABLE1 GPIO4_REG32(0x01C)
#define GPIO4_IRQSTATUS1 GPIO4_REG32(0x018)
#define GPIO4_IRQENABLE2 GPIO4_REG32(0x02C)
#define GPIO4_IRQSTATUS2 GPIO4_REG32(0x028)
#define GPIO4_WAKEUPENABLE GPIO4_REG32(0x020)
#define GPIO4_RISINGDETECT GPIO4_REG32(0x048)
#define GPIO4_FALLINGDETECT GPIO4_REG32(0x04C)
#define GPIO4_DATAIN GPIO4_REG32(0x038)
#define GPIO4_OE GPIO4_REG32(0x034)
#define GPIO4_DATAOUT GPIO4_REG32(0x03C)
#define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050)
#define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054)
/* IO CONFIG */
#define CONTROL_BASE (OMAP24XX_CTRL_BASE)
#define CONTROL_REG32(offset) __REG32(CONTROL_BASE + (offset))
#define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104)
#define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134)
#define CONTROL_PADCONF_UART1_RX CONTROL_REG32(0x0C8)
#define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C)
#define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090)
#define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8)
#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC)
#define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0)
#define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC)
/* CONTROL */
#define CONTROL_DEVCONF CONTROL_REG32(0x274)
/* INTERRUPT CONTROLLER */
#define INTC_BASE (OMAP24XX_L4_IO_BASE+0xfe000)
#define INTC_REG32(offset) __REG32(INTC_BASE + (offset))
#define INTC1_U_BASE INTC_REG32(0x000)
#define INTC_MIR0 INTC_REG32(0x084)
#define INTC_MIR_SET0 INTC_REG32(0x08C)
#define INTC_MIR_CLEAR0 INTC_REG32(0x088)
#define INTC_ISR_CLEAR0 INTC_REG32(0x094)
#define INTC_MIR1 INTC_REG32(0x0A4)
#define INTC_MIR_SET1 INTC_REG32(0x0AC)
#define INTC_MIR_CLEAR1 INTC_REG32(0x0A8)
#define INTC_ISR_CLEAR1 INTC_REG32(0x0B4)
#define INTC_MIR2 INTC_REG32(0x0C4)
#define INTC_MIR_SET2 INTC_REG32(0x0CC)
#define INTC_MIR_CLEAR2 INTC_REG32(0x0C8)
#define INTC_ISR_CLEAR2 INTC_REG32(0x0D4)
#define INTC_SIR_IRQ INTC_REG32(0x040)
#define INTC_CONTROL INTC_REG32(0x048)
#define INTC_ILR11 INTC_REG32(0x12C)
#define INTC_ILR32 INTC_REG32(0x180)
#define INTC_ILR37 INTC_REG32(0x194)
#define INTC_SYSCONFIG INTC_REG32(0x010)
/* RAM FIREWALL */
#define RAMFW_BASE (0x68005000)
#define RAMFW_REG32(offset) __REG32(RAMFW_BASE + (offset))
#define RAMFW_REQINFOPERM0 RAMFW_REG32(0x048)
#define RAMFW_READPERM0 RAMFW_REG32(0x050)
#define RAMFW_WRITEPERM0 RAMFW_REG32(0x058)
/* GPMC CS1 FPGA ON USER INTERFACE MODULE */
//#define DEBUG_BOARD_LED_REGISTER 0x04000014
/* GPMC CS0 */
#define GPMC_CONFIG1_0 GPMC_REG32(0x060)
#define GPMC_CONFIG2_0 GPMC_REG32(0x064)
#define GPMC_CONFIG3_0 GPMC_REG32(0x068)
#define GPMC_CONFIG4_0 GPMC_REG32(0x06C)
#define GPMC_CONFIG5_0 GPMC_REG32(0x070)
#define GPMC_CONFIG6_0 GPMC_REG32(0x074)
#define GPMC_CONFIG7_0 GPMC_REG32(0x078)
/* DSS */
#define DSS_CONTROL DISP_REG32(0x040)
#define DISPC_CONTROL DISP_REG32(0x440)
#define DISPC_SYSSTATUS DISP_REG32(0x414)
#define DISPC_IRQSTATUS DISP_REG32(0x418)
#define DISPC_IRQENABLE DISP_REG32(0x41C)
#define DISPC_CONFIG DISP_REG32(0x444)
#define DISPC_DEFAULT_COLOR0 DISP_REG32(0x44C)
#define DISPC_DEFAULT_COLOR1 DISP_REG32(0x450)
#define DISPC_TRANS_COLOR0 DISP_REG32(0x454)
#define DISPC_TRANS_COLOR1 DISP_REG32(0x458)
#define DISPC_LINE_NUMBER DISP_REG32(0x460)
#define DISPC_TIMING_H DISP_REG32(0x464)
#define DISPC_TIMING_V DISP_REG32(0x468)
#define DISPC_POL_FREQ DISP_REG32(0x46C)
#define DISPC_DIVISOR DISP_REG32(0x470)
#define DISPC_SIZE_DIG DISP_REG32(0x478)
#define DISPC_SIZE_LCD DISP_REG32(0x47C)
#define DISPC_GFX_BA0 DISP_REG32(0x480)
#define DISPC_GFX_BA1 DISP_REG32(0x484)
#define DISPC_GFX_POSITION DISP_REG32(0x488)
#define DISPC_GFX_SIZE DISP_REG32(0x48C)
#define DISPC_GFX_ATTRIBUTES DISP_REG32(0x4A0)
#define DISPC_GFX_FIFO_THRESHOLD DISP_REG32(0x4A4)
#define DISPC_GFX_ROW_INC DISP_REG32(0x4AC)
#define DISPC_GFX_PIXEL_INC DISP_REG32(0x4B0)
#define DISPC_GFX_WINDOW_SKIP DISP_REG32(0x4B4)
#define DISPC_GFX_TABLE_BA DISP_REG32(0x4B8)
#define DISPC_DATA_CYCLE1 DISP_REG32(0x5D4)
#define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8)
#define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC)
/* Wake up define for board */
#define GPIO97 (1 << 1)
#define GPIO88 (1 << 24)
#endif /* __ASSEMBLER__ */
#endif
/*
* arch/arm/mach-omap/omap2/serial.c
*
* OMAP2 serial support.
*
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
* Based off of arch/arm/mach-omap/omap1/serial.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <asm/io.h>
#include <asm/hardware/clock.h>
#include <asm/arch/common.h>
#include <asm/arch/board.h>
static struct clk * uart1_ick = NULL;
static struct clk * uart1_fck = NULL;
static struct clk * uart2_ick = NULL;
static struct clk * uart2_fck = NULL;
static struct clk * uart3_ick = NULL;
static struct clk * uart3_fck = NULL;
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (char *)IO_ADDRESS(OMAP_UART1_BASE),
.mapbase = (unsigned long)OMAP_UART1_BASE,
.irq = 72,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP16XX_BASE_BAUD * 16,
}, {
.membase = (char *)IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = (unsigned long)OMAP_UART2_BASE,
.irq = 73,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP16XX_BASE_BAUD * 16,
}, {
.membase = (char *)IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = (unsigned long)OMAP_UART3_BASE,
.irq = 74,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP16XX_BASE_BAUD * 16,
}, {
.flags = 0
}
};
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
int offset)
{
offset <<= up->regshift;
return (unsigned int)__raw_readb(up->membase + offset);
}
static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
int value)
{
offset <<= p->regshift;
__raw_writeb(value, (unsigned long)(p->membase + offset));
}
/*
* Internal UARTs need to be initialized for the 8250 autoconfig to work
* properly. Note that the TX watermark initialization may not be needed
* once the 8250.c watermark handling code is merged.
*/
static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
{
serial_write_reg(p, UART_OMAP_MDR1, 0x07);
serial_write_reg(p, UART_OMAP_SCR, 0x08);
serial_write_reg(p, UART_OMAP_MDR1, 0x00);
serial_write_reg(p, UART_OMAP_SYSC, 0x01);
}
void __init omap_serial_init()
{
int i;
const struct omap_uart_config *info;
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
* if not needed.
*/
info = omap_get_config(OMAP_TAG_UART,
struct omap_uart_config);
if (info == NULL)
return;
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
struct plat_serial8250_port *p = serial_platform_data + i;
if (!(info->enabled_uarts & (1 << i))) {
p->membase = 0;
p->mapbase = 0;
continue;
}
switch (i) {
case 0:
uart1_ick = clk_get(NULL, "uart1_ick");
if (IS_ERR(uart1_ick))
printk("Could not get uart1_ick\n");
else {
clk_use(uart1_ick);
}
uart1_fck = clk_get(NULL, "uart1_fck");
if (IS_ERR(uart1_fck))
printk("Could not get uart1_fck\n");
else {
clk_use(uart1_fck);
}
break;
case 1:
uart2_ick = clk_get(NULL, "uart2_ick");
if (IS_ERR(uart2_ick))
printk("Could not get uart2_ick\n");
else {
clk_use(uart2_ick);
}
uart2_fck = clk_get(NULL, "uart2_fck");
if (IS_ERR(uart2_fck))
printk("Could not get uart2_fck\n");
else {
clk_use(uart2_fck);
}
break;
case 2:
uart3_ick = clk_get(NULL, "uart3_ick");
if (IS_ERR(uart3_ick))
printk("Could not get uart3_ick\n");
else {
clk_use(uart3_ick);
}
uart3_fck = clk_get(NULL, "uart3_fck");
if (IS_ERR(uart3_fck))
printk("Could not get uart3_fck\n");
else {
clk_use(uart3_fck);
}
break;
}
omap_serial_reset(p);
}
}
static struct platform_device serial_device = {
.name = "serial8250",
.id = 0,
.dev = {
.platform_data = serial_platform_data,
},
};
static int __init omap_init(void)
{
return platform_device_register(&serial_device);
}
arch_initcall(omap_init);
/*
* linux/arch/arm/mach-omap1/sram.S
*
* Omap2 specific functions that need to be run in internal SRAM
*
* (C) Copyright 2004
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/arch/io.h>
#include <asm/hardware.h>
#include <asm/arch/prcm.h>
#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010)
#define CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x544)
#define PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x050)
#define PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x080)
#define CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x500)
#define CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x520)
#define CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x540)
#define SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060)
#define SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4)
.text
ENTRY(sram_ddr_init)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r12, r2 @ capture CS1 vs CS0
mov r8, r3 @ capture force parameter
/* frequency shift down */
ldr r2, cm_clksel2_pll @ get address of dpllout reg
mov r3, #0x1 @ value for 1x operation
str r3, [r2] @ go to L1-freq operation
/* voltage shift down */
mov r9, #0x1 @ set up for L1 voltage call
bl voltage_shift @ go drop voltage
/* dll lock mode */
ldr r11, sdrc_dlla_ctrl @ addr of dlla ctrl
ldr r10, [r11] @ get current val
cmp r12, #0x1 @ cs1 base (2422 es2.05/1)
addeq r11, r11, #0x8 @ if cs1 base, move to DLLB
mvn r9, #0x4 @ mask to get clear bit2
and r10, r10, r9 @ clear bit2 for lock mode.
orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz
str r10, [r11] @ commit to DLLA_CTRL
bl i_dll_wait @ wait for dll to lock
/* get dll value */
add r11, r11, #0x4 @ get addr of status reg
ldr r10, [r11] @ get locked value
/* voltage shift up */
mov r9, #0x0 @ shift back to L0-voltage
bl voltage_shift @ go raise voltage
/* frequency shift up */
mov r3, #0x2 @ value for 2x operation
str r3, [r2] @ go to L0-freq operation
/* reset entry mode for dllctrl */
sub r11, r11, #0x4 @ move from status to ctrl
cmp r12, #0x1 @ normalize if cs1 based
subeq r11, r11, #0x8 @ possibly back to DLLA
cmp r8, #0x1 @ if forced unlock exit
orreq r1, r1, #0x4 @ make sure exit with unlocked value
str r1, [r11] @ restore DLLA_CTRL high value
add r11, r11, #0x8 @ move to DLLB_CTRL addr
str r1, [r11] @ set value DLLB_CTRL
bl i_dll_wait @ wait for possible lock
/* set up for return, DDR should be good */
str r10, [r0] @ write dll_status and return counter
ldmfd sp!, {r0 - r12, pc} @ restore regs and return
/* ensure the DLL has relocked */
i_dll_wait:
mov r4, #0x800 @ delay DLL relock, min 0x400 L3 clocks
i_dll_delay:
subs r4, r4, #0x1
bne i_dll_delay
mov pc, lr
/*
* shift up or down voltage, use R9 as input to tell level.
* wait for it to finish, use 32k sync counter, 1tick=31uS.
*/
voltage_shift:
ldr r4, prcm_voltctrl @ get addr of volt ctrl.
ldr r5, [r4] @ get value.
ldr r6, prcm_mask_val @ get value of mask
and r5, r5, r6 @ apply mask to clear bits
orr r5, r5, r9 @ bulld value for L0/L1-volt operation.
str r5, [r4] @ set up for change.
mov r3, #0x4000 @ get val for force
orr r5, r5, r3 @ build value for force
str r5, [r4] @ Force transition to L1
ldr r3, timer_32ksynct_cr @ get addr of counter
ldr r5, [r3] @ get value
add r5, r5, #0x3 @ give it at most 93uS
volt_delay:
ldr r7, [r3] @ get timer value
cmp r5, r7 @ time up?
bhi volt_delay @ not yet->branch
mov pc, lr @ back to caller.
/* relative load constants */
cm_clksel2_pll:
.word CM_CLKSEL2_PLL_V
sdrc_dlla_ctrl:
.word SDRC_DLLA_CTRL_V
prcm_voltctrl:
.word PRCM_VOLTCTRL_V
prcm_mask_val:
.word 0xFFFF3FFC
timer_32ksynct_cr:
.word TIMER_32KSYNCT_CR_V
ENTRY(sram_ddr_init_sz)
.word . - sram_ddr_init
/*
* Reprograms memory timings.
* r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
* PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
*/
ENTRY(sram_reprogram_sdrc)
stmfd sp!, {r0 - r10, lr} @ save registers on stack
mov r3, #0x0 @ clear for mrc call
mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR
nop
nop
ldr r6, ddr_sdrc_rfr_ctrl @ get addr of refresh reg
ldr r5, [r6] @ get value
mov r5, r5, lsr #8 @ isolate rfr field and drop burst
cmp r0, #0x1 @ going to half speed?
movne r9, #0x0 @ if up set flag up for pre up, hi volt
blne voltage_shift_c @ adjust voltage
cmp r0, #0x1 @ going to half speed (post branch link)
moveq r5, r5, lsr #1 @ divide by 2 if to half
movne r5, r5, lsl #1 @ mult by 2 if to full
mov r5, r5, lsl #8 @ put rfr field back into place
add r5, r5, #0x1 @ turn on burst of 1
ldr r4, ddr_cm_clksel2_pll @ get address of out reg
ldr r3, [r4] @ get curr value
orr r3, r3, #0x3
bic r3, r3, #0x3 @ clear lower bits
orr r3, r3, r0 @ new state value
str r3, [r4] @ set new state (pll/x, x=1 or 2)
nop
nop
moveq r9, #0x1 @ if speed down, post down, drop volt
bleq voltage_shift_c
mcr p15, 0, r3, c7, c10, 4 @ memory barrier
str r5, [r6] @ set new RFR_1 value
add r6, r6, #0x30 @ get RFR_2 addr
str r5, [r6] @ set RFR_2
nop
cmp r2, #0x1 @ (SDR or DDR) do we need to adjust DLL
bne freq_out @ leave if SDR, no DLL function
/* With DDR, we need to take care of the DLL for the frequency change */
ldr r2, ddr_sdrc_dlla_ctrl @ addr of dlla ctrl
str r1, [r2] @ write out new SDRC_DLLA_CTRL
add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL
str r1, [r2] @ commit to SDRC_DLLB_CTRL
mov r1, #0x2000 @ wait DLL relock, min 0x400 L3 clocks
dll_wait:
subs r1, r1, #0x1
bne dll_wait
freq_out:
ldmfd sp!, {r0 - r10, pc} @ restore regs and return
/*
* shift up or down voltage, use R9 as input to tell level.
* wait for it to finish, use 32k sync counter, 1tick=31uS.
*/
voltage_shift_c:
ldr r10, ddr_prcm_voltctrl @ get addr of volt ctrl
ldr r8, [r10] @ get value
ldr r7, ddr_prcm_mask_val @ get value of mask
and r8, r8, r7 @ apply mask to clear bits
orr r8, r8, r9 @ bulld value for L0/L1-volt operation.
str r8, [r10] @ set up for change.
mov r7, #0x4000 @ get val for force
orr r8, r8, r7 @ build value for force
str r8, [r10] @ Force transition to L1
ldr r10, ddr_timer_32ksynct @ get addr of counter
ldr r8, [r10] @ get value
add r8, r8, #0x2 @ give it at most 62uS (min 31+)
volt_delay_c:
ldr r7, [r10] @ get timer value
cmp r8, r7 @ time up?
bhi volt_delay_c @ not yet->branch
mov pc, lr @ back to caller
ddr_cm_clksel2_pll:
.word CM_CLKSEL2_PLL_V
ddr_sdrc_dlla_ctrl:
.word SDRC_DLLA_CTRL_V
ddr_sdrc_rfr_ctrl:
.word SDRC_RFR_CTRL_V
ddr_prcm_voltctrl:
.word PRCM_VOLTCTRL_V
ddr_prcm_mask_val:
.word 0xFFFF3FFC
ddr_timer_32ksynct:
.word TIMER_32KSYNCT_CR_V
ENTRY(sram_reprogram_sdrc_sz)
.word . - sram_reprogram_sdrc
/*
* Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
*/
ENTRY(sram_set_prcm)
stmfd sp!, {r0-r12, lr} @ regs to stack
adr r4, pbegin @ addr of preload start
adr r8, pend @ addr of preload end
mcrr p15, 1, r8, r4, c12 @ preload into icache
pbegin:
/* move into fast relock bypass */
ldr r8, pll_ctl @ get addr
ldr r5, [r8] @ get val
mvn r6, #0x3 @ clear mask
and r5, r5, r6 @ clear field
orr r7, r5, #0x2 @ fast relock val
str r7, [r8] @ go to fast relock
ldr r4, pll_stat @ addr of stat
block:
/* wait for bypass */
ldr r8, [r4] @ stat value
and r8, r8, #0x3 @ mask for stat
cmp r8, #0x1 @ there yet
bne block @ loop if not
/* set new dpll dividers _after_ in bypass */
ldr r4, pll_div @ get addr
str r0, [r4] @ set dpll ctrl val
ldr r4, set_config @ get addr
mov r8, #1 @ valid cfg msk
str r8, [r4] @ make dividers take
mov r4, #100 @ dead spin a bit
wait_a_bit:
subs r4, r4, #1 @ dec loop
bne wait_a_bit @ delay done?
/* check if staying in bypass */
cmp r2, #0x1 @ stay in bypass?
beq pend @ jump over dpll relock
/* relock DPLL with new vals */
ldr r5, pll_stat @ get addr
ldr r4, pll_ctl @ get addr
orr r8, r7, #0x3 @ val for lock dpll
str r8, [r4] @ set val
mov r0, #1000 @ dead spin a bit
wait_more:
subs r0, r0, #1 @ dec loop
bne wait_more @ delay done?
wait_lock:
ldr r8, [r5] @ get lock val
and r8, r8, #3 @ isolate field
cmp r8, #2 @ locked?
bne wait_lock @ wait if not
pend:
/* update memory timings & briefly lock dll */
ldr r4, sdrc_rfr @ get addr
str r1, [r4] @ update refresh timing
ldr r11, dlla_ctrl @ get addr of DLLA ctrl
ldr r10, [r11] @ get current val
mvn r9, #0x4 @ mask to get clear bit2
and r10, r10, r9 @ clear bit2 for lock mode
orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
str r10, [r11] @ commit to DLLA_CTRL
add r11, r11, #0x8 @ move to dllb
str r10, [r11] @ hit DLLB also
mov r4, #0x800 @ relock time (min 0x400 L3 clocks)
wait_dll_lock:
subs r4, r4, #0x1
bne wait_dll_lock
nop
ldmfd sp!, {r0-r12, pc} @ restore regs and return
set_config:
.word PRCM_CLKCFG_CTRL_V
pll_ctl:
.word CM_CLKEN_PLL_V
pll_stat:
.word CM_IDLEST_CKGEN_V
pll_div:
.word CM_CLKSEL1_PLL_V
sdrc_rfr:
.word SDRC_RFR_CTRL_V
dlla_ctrl:
.word SDRC_DLLA_CTRL_V
ENTRY(sram_set_prcm_sz)
.word . - sram_set_prcm
/*
* linux/arch/arm/mach-omap2/timer-gp.c
*
* OMAP2 GP timer support.
*
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
* Juha Yrjl <juha.yrjola@nokia.com>
*
* Some parts based off of TI's 24xx code:
*
* Copyright (C) 2004 Texas Instruments, Inc.
*
* Roughly modelled after the OMAP1 MPU timer code.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/time.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <asm/mach/time.h>
#include <asm/delay.h>
#include <asm/io.h>
#include <asm/hardware/clock.h>
#define OMAP2_GP_TIMER1_BASE 0x48028000
#define OMAP2_GP_TIMER2_BASE 0x4802a000
#define OMAP2_GP_TIMER3_BASE 0x48078000
#define OMAP2_GP_TIMER4_BASE 0x4807a000
#define GP_TIMER_TIDR 0x00
#define GP_TIMER_TISR 0x18
#define GP_TIMER_TIER 0x1c
#define GP_TIMER_TCLR 0x24
#define GP_TIMER_TCRR 0x28
#define GP_TIMER_TLDR 0x2c
#define GP_TIMER_TSICR 0x40
#define OS_TIMER_NR 1 /* GP timer 2 */
static unsigned long timer_base[] = {
IO_ADDRESS(OMAP2_GP_TIMER1_BASE),
IO_ADDRESS(OMAP2_GP_TIMER2_BASE),
IO_ADDRESS(OMAP2_GP_TIMER3_BASE),
IO_ADDRESS(OMAP2_GP_TIMER4_BASE),
};
static inline unsigned int timer_read_reg(int nr, unsigned int reg)
{
return __raw_readl(timer_base[nr] + reg);
}
static inline void timer_write_reg(int nr, unsigned int reg, unsigned int val)
{
__raw_writel(val, timer_base[nr] + reg);
}
/* Note that we always enable the clock prescale divider bit */
static inline void omap2_gp_timer_start(int nr, unsigned long load_val)
{
unsigned int tmp;
tmp = 0xffffffff - load_val;
timer_write_reg(nr, GP_TIMER_TLDR, tmp);
timer_write_reg(nr, GP_TIMER_TCRR, tmp);
timer_write_reg(nr, GP_TIMER_TIER, 1 << 1);
timer_write_reg(nr, GP_TIMER_TCLR, (1 << 5) | (1 << 1) | 1);
}
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
struct pt_regs *regs)
{
write_seqlock(&xtime_lock);
timer_write_reg(OS_TIMER_NR, GP_TIMER_TISR, 1 << 1);
timer_tick(regs);
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
static struct irqaction omap2_gp_timer_irq = {
.name = "gp timer",
.flags = SA_INTERRUPT,
.handler = omap2_gp_timer_interrupt,
};
static void __init omap2_gp_timer_init(void)
{
struct clk * sys_ck;
u32 tick_period = 120000;
u32 l;
/* Reset clock and prescale value */
timer_write_reg(OS_TIMER_NR, GP_TIMER_TCLR, 0);
sys_ck = clk_get(NULL, "sys_ck");
if (IS_ERR(sys_ck))
printk(KERN_ERR "Could not get sys_ck\n");
else {
clk_use(sys_ck);
tick_period = clk_get_rate(sys_ck) / 100;
clk_put(sys_ck);
}
tick_period /= 2; /* Minimum prescale divider is 2 */
tick_period -= 1;
l = timer_read_reg(OS_TIMER_NR, GP_TIMER_TIDR);
printk(KERN_INFO "OMAP2 GP timer (HW version %d.%d)\n",
(l >> 4) & 0x0f, l & 0x0f);
setup_irq(38, &omap2_gp_timer_irq);
omap2_gp_timer_start(OS_TIMER_NR, tick_period);
}
struct sys_timer omap_timer = {
.init = omap2_gp_timer_init,
};
......@@ -242,7 +242,7 @@ config CPU_XSCALE
# ARMv6
config CPU_V6
bool "Support ARM V6 processor"
depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB
depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2
select CPU_32v6
select CPU_ABRT_EV6
select CPU_CACHE_V6
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment