ARM: Merge for-2635/s5p-dma

Merge branch 'for-2635/s5p-dma' into for-linus/samsung2

Conflicts:
	arch/arm/mach-s5pv210/Makefile

arch/arm/mach-s5p6440/Kconfig

@@ -9,6 +9,7 @@ if ARCH_S5P6440
 
 config CPU_S5P6440
 	bool
+	select S3C_PL330_DMA
 	help
 	  Enable S5P6440 CPU support
 

arch/arm/mach-s5p6440/Makefile

@@ -12,7 +12,7 @@ obj-				:=
 
 # Core support for S5P6440 system
 
-obj-$(CONFIG_CPU_S5P6440)	+= cpu.o init.o clock.o gpio.o
+obj-$(CONFIG_CPU_S5P6440)	+= cpu.o init.o clock.o gpio.o dma.o
 
 # machine support
 

arch/arm/mach-s5p6440/dma.c

+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5p6440_pdma_resource[] = {
+	[0] = {
+		.start  = S5P6440_PA_PDMA,
+		.end    = S5P6440_PA_PDMA + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_DMA0,
+		.end	= IRQ_DMA0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_MAX,
+		[9] = DMACH_MAX,
+		[10] = DMACH_PCM0_TX,
+		[11] = DMACH_PCM0_RX,
+		[12] = DMACH_I2S0_TX,
+		[13] = DMACH_I2S0_RX,
+		[14] = DMACH_SPI0_TX,
+		[15] = DMACH_SPI0_RX,
+		[16] = DMACH_MAX,
+		[17] = DMACH_MAX,
+		[18] = DMACH_MAX,
+		[19] = DMACH_MAX,
+		[20] = DMACH_SPI1_TX,
+		[21] = DMACH_SPI1_RX,
+		[22] = DMACH_MAX,
+		[23] = DMACH_MAX,
+		[24] = DMACH_MAX,
+		[25] = DMACH_MAX,
+		[26] = DMACH_MAX,
+		[27] = DMACH_MAX,
+		[28] = DMACH_MAX,
+		[29] = DMACH_PWM,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5p6440_device_pdma = {
+	.name		= "s3c-pl330",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p6440_pdma_resource),
+	.resource	= s5p6440_pdma_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5p6440_pdma_pdata,
+	},
+};
+
+static struct platform_device *s5p6440_dmacs[] __initdata = {
+	&s5p6440_device_pdma,
+};
+
+static int __init s5p6440_dma_init(void)
+{
+	platform_add_devices(s5p6440_dmacs, ARRAY_SIZE(s5p6440_dmacs));
+
+	return 0;
+}
+arch_initcall(s5p6440_dma_init);

arch/arm/mach-s5p6440/include/mach/dma.h

+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */

arch/arm/mach-s5p6440/include/mach/map.h

@@ -29,6 +29,8 @@
 #define S5P6440_PA_VIC0		(0xE4000000)
 #define S5P_PA_VIC0		S5P6440_PA_VIC0
 
+#define S5P6440_PA_PDMA		0xE9000000
+
 #define S5P6440_PA_VIC1		(0xE4100000)
 #define S5P_PA_VIC1		S5P6440_PA_VIC1
 

arch/arm/mach-s5p6442/Kconfig

@@ -12,6 +12,7 @@ if ARCH_S5P6442
 config CPU_S5P6442
 	bool
 	select PLAT_S5P
+	select S3C_PL330_DMA
 	help
 	  Enable S5P6442 CPU support
 

arch/arm/mach-s5p6442/Makefile

@@ -12,7 +12,7 @@ obj-				:=
 
 # Core support for S5P6442 system
 
-obj-$(CONFIG_CPU_S5P6442)	+= cpu.o init.o clock.o
+obj-$(CONFIG_CPU_S5P6442)	+= cpu.o init.o clock.o dma.o
 
 # machine support
 

arch/arm/mach-s5p6442/dma.c

+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5p6442_pdma_resource[] = {
+	[0] = {
+		.start  = S5P6442_PA_PDMA,
+		.end    = S5P6442_PA_PDMA + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA,
+		.end	= IRQ_PDMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5p6442_pdma_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_MAX,
+		[7] = DMACH_MAX,
+		[8] = DMACH_MAX,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S0S_TX,
+		[12] = DMACH_I2S1_RX,
+		[13] = DMACH_I2S1_TX,
+		[14] = DMACH_MAX,
+		[15] = DMACH_MAX,
+		[16] = DMACH_SPI0_RX,
+		[17] = DMACH_SPI0_TX,
+		[18] = DMACH_MAX,
+		[19] = DMACH_MAX,
+		[20] = DMACH_PCM0_RX,
+		[21] = DMACH_PCM0_TX,
+		[22] = DMACH_PCM1_RX,
+		[23] = DMACH_PCM1_TX,
+		[24] = DMACH_MAX,
+		[25] = DMACH_MAX,
+		[26] = DMACH_MAX,
+		[27] = DMACH_MSM_REQ0,
+		[28] = DMACH_MSM_REQ1,
+		[29] = DMACH_MSM_REQ2,
+		[30] = DMACH_MSM_REQ3,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5p6442_device_pdma = {
+	.name		= "s3c-pl330",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p6442_pdma_resource),
+	.resource	= s5p6442_pdma_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5p6442_pdma_pdata,
+	},
+};
+
+static struct platform_device *s5p6442_dmacs[] __initdata = {
+	&s5p6442_device_pdma,
+};
+
+static int __init s5p6442_dma_init(void)
+{
+	platform_add_devices(s5p6442_dmacs, ARRAY_SIZE(s5p6442_dmacs));
+
+	return 0;
+}
+arch_initcall(s5p6442_dma_init);

arch/arm/mach-s5p6442/include/mach/dma.h

+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */

arch/arm/mach-s5p6442/include/mach/map.h

@@ -34,6 +34,9 @@
 #define S5P6442_PA_VIC2		(0xE4200000)
 #define S5P_PA_VIC2		S5P6442_PA_VIC2
 
+#define S5P6442_PA_MDMA		0xE8000000
+#define S5P6442_PA_PDMA		0xE9000000
+
 #define S5P6442_PA_TIMER	(0xEA000000)
 #define S5P_PA_TIMER		S5P6442_PA_TIMER
 

arch/arm/mach-s5pv210/Kconfig

@@ -12,6 +12,7 @@ if ARCH_S5PV210
 config CPU_S5PV210
 	bool
 	select PLAT_S5P
+	select S3C_PL330_DMA
 	help
 	  Enable S5PV210 CPU support
 

arch/arm/mach-s5pv210/Makefile

@@ -12,7 +12,7 @@ obj-				:=
 
 # Core support for S5PV210 system
 
-obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o gpiolib.o
+obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o gpiolib.o
 
 # machine support
 

arch/arm/mach-s5pv210/dma.c

+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5pv210_pdma0_resource[] = {
+	[0] = {
+		.start  = S5PV210_PA_PDMA0,
+		.end    = S5PV210_PA_PDMA0 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA0,
+		.end	= IRQ_PDMA0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_MAX,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S0S_TX,
+		[12] = DMACH_I2S1_RX,
+		[13] = DMACH_I2S1_TX,
+		[14] = DMACH_MAX,
+		[15] = DMACH_MAX,
+		[16] = DMACH_SPI0_RX,
+		[17] = DMACH_SPI0_TX,
+		[18] = DMACH_SPI1_RX,
+		[19] = DMACH_SPI1_TX,
+		[20] = DMACH_MAX,
+		[21] = DMACH_MAX,
+		[22] = DMACH_AC97_MICIN,
+		[23] = DMACH_AC97_PCMIN,
+		[24] = DMACH_AC97_PCMOUT,
+		[25] = DMACH_MAX,
+		[26] = DMACH_PWM,
+		[27] = DMACH_SPDIF,
+		[28] = DMACH_MAX,
+		[29] = DMACH_MAX,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5pv210_device_pdma0 = {
+	.name		= "s3c-pl330",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5pv210_pdma0_resource),
+	.resource	= s5pv210_pdma0_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pv210_pdma0_pdata,
+	},
+};
+
+static struct resource s5pv210_pdma1_resource[] = {
+	[0] = {
+		.start  = S5PV210_PA_PDMA1,
+		.end    = S5PV210_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA1,
+		.end	= IRQ_PDMA1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_MAX,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S0S_TX,
+		[12] = DMACH_I2S1_RX,
+		[13] = DMACH_I2S1_TX,
+		[14] = DMACH_I2S2_RX,
+		[15] = DMACH_I2S2_TX,
+		[16] = DMACH_SPI0_RX,
+		[17] = DMACH_SPI0_TX,
+		[18] = DMACH_SPI1_RX,
+		[19] = DMACH_SPI1_TX,
+		[20] = DMACH_MAX,
+		[21] = DMACH_MAX,
+		[22] = DMACH_PCM0_RX,
+		[23] = DMACH_PCM0_TX,
+		[24] = DMACH_PCM1_RX,
+		[25] = DMACH_PCM1_TX,
+		[26] = DMACH_MSM_REQ0,
+		[27] = DMACH_MSM_REQ1,
+		[28] = DMACH_MSM_REQ2,
+		[29] = DMACH_MSM_REQ3,
+		[30] = DMACH_PCM2_RX,
+		[31] = DMACH_PCM2_TX,
+	},
+};
+
+static struct platform_device s5pv210_device_pdma1 = {
+	.name		= "s3c-pl330",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s5pv210_pdma1_resource),
+	.resource	= s5pv210_pdma1_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pv210_pdma1_pdata,
+	},
+};
+
+static struct platform_device *s5pv210_dmacs[] __initdata = {
+	&s5pv210_device_pdma0,
+	&s5pv210_device_pdma1,
+};
+
+static int __init s5pv210_dma_init(void)
+{
+	platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs));
+
+	return 0;
+}
+arch_initcall(s5pv210_dma_init);

arch/arm/mach-s5pv210/include/mach/dma.h

+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */

arch/arm/mach-s5pv210/include/mach/map.h

@@ -43,6 +43,10 @@
 
 #define S5PV210_PA_SROMC	(0xE8000000)
 
+#define S5PV210_PA_MDMA		0xFA200000
+#define S5PV210_PA_PDMA0	0xE0900000
+#define S5PV210_PA_PDMA1	0xE0A00000
+
 #define S5PV210_PA_VIC0		(0xF2000000)
 #define S5P_PA_VIC0		S5PV210_PA_VIC0
 

arch/arm/plat-samsung/Kconfig

@@ -203,6 +203,12 @@ config S3C_DMA
 	help
 	  Internal configuration for S3C DMA core
 
+config S3C_PL330_DMA
+	bool
+	select PL330
+	help
+	  S3C DMA API Driver for PL330 DMAC.
+
 comment "Power management"
 
 config SAMSUNG_PM_DEBUG

arch/arm/plat-samsung/Makefile

@@ -46,6 +46,8 @@ obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
 
 obj-$(CONFIG_S3C_DMA)		+= dma.o
 
+obj-$(CONFIG_S3C_PL330_DMA)	+= s3c-pl330.o
+
 # PM support
 
 obj-$(CONFIG_PM)		+= pm.o

arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h

+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__S3C_DMA_PL330_H_
+#define	__S3C_DMA_PL330_H_
+
+#define S3C2410_DMAF_AUTOSTART		(1 << 0)
+#define S3C2410_DMAF_CIRCULAR		(1 << 1)
+
+/*
+ * PL330 can assign any channel to communicate with
+ * any of the peripherals attched to the DMAC.
+ * For the sake of consistency across client drivers,
+ * We keep the channel names unchanged and only add
+ * missing peripherals are added.
+ * Order is not important since S3C PL330 API driver
+ * use these just as IDs.
+ */
+enum dma_ch {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_IRDA,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
+	DMACH_EXTERNAL,
+	DMACH_PWM,
+	DMACH_SPDIF,
+	DMACH_HSI_RX,
+	DMACH_HSI_TX,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_PCM1_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM2_TX,
+	DMACH_PCM2_RX,
+	DMACH_MSM_REQ3,
+	DMACH_MSM_REQ2,
+	DMACH_MSM_REQ1,
+	DMACH_MSM_REQ0,
+	/* END Marker, also used to denote a reserved channel */
+	DMACH_MAX,
+};
+
+static inline bool s3c_dma_has_circular(void)
+{
+	return true;
+}
+
+#include <plat/dma.h>
+
+#endif	/* __S3C_DMA_PL330_H_ */

arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h

+/* linux/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __S3C_PL330_PDATA_H
+#define __S3C_PL330_PDATA_H
+
+#include <plat/s3c-dma-pl330.h>
+
+/*
+ * Every PL330 DMAC has max 32 peripheral interfaces,
+ * of which some may be not be really used in your
+ * DMAC's configuration.
+ * Populate this array of 32 peri i/fs with relevant
+ * channel IDs for used peri i/f and DMACH_MAX for
+ * those unused.
+ *
+ * The platforms just need to provide this info
+ * to the S3C DMA API driver for PL330.
+ */
+struct s3c_pl330_platdata {
+	enum dma_ch peri[32];
+};
+
+#endif /* __S3C_PL330_PDATA_H */

arch/arm/plat-samsung/s3c-pl330.c

+/* linux/arch/arm/plat-samsung/s3c-pl330.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware/pl330.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+/**
+ * struct s3c_pl330_dmac - Logical representation of a PL330 DMAC.
+ * @busy_chan: Number of channels currently busy.
+ * @peri: List of IDs of peripherals this DMAC can work with.
+ * @node: To attach to the global list of DMACs.
+ * @pi: PL330 configuration info for the DMAC.
+ * @kmcache: Pool to quickly allocate xfers for all channels in the dmac.
+ */
+struct s3c_pl330_dmac {
+	unsigned		busy_chan;
+	enum dma_ch		*peri;
+	struct list_head	node;
+	struct pl330_info	*pi;
+	struct kmem_cache	*kmcache;
+};
+
+/**
+ * struct s3c_pl330_xfer - A request submitted by S3C DMA clients.
+ * @token: Xfer ID provided by the client.
+ * @node: To attach to the list of xfers on a channel.
+ * @px: Xfer for PL330 core.
+ * @chan: Owner channel of this xfer.
+ */
+struct s3c_pl330_xfer {
+	void			*token;
+	struct list_head	node;
+	struct pl330_xfer	px;
+	struct s3c_pl330_chan	*chan;
+};
+
+/**
+ * struct s3c_pl330_chan - Logical channel to communicate with
+ * 	a Physical peripheral.
+ * @pl330_chan_id: Token of a hardware channel thread of PL330 DMAC.
+ * 	NULL if the channel is available to be acquired.
+ * @id: ID of the peripheral that this channel can communicate with.
+ * @options: Options specified by the client.
+ * @sdaddr: Address provided via s3c2410_dma_devconfig.
+ * @node: To attach to the global list of channels.
+ * @lrq: Pointer to the last submitted pl330_req to PL330 core.
+ * @xfer_list: To manage list of xfers enqueued.
+ * @req: Two requests to communicate with the PL330 engine.
+ * @callback_fn: Callback function to the client.
+ * @rqcfg: Channel configuration for the xfers.
+ * @xfer_head: Pointer to the xfer to be next excecuted.
+ * @dmac: Pointer to the DMAC that manages this channel, NULL if the
+ * 	channel is available to be acquired.
+ * @client: Client of this channel. NULL if the
+ * 	channel is available to be acquired.
+ */
+struct s3c_pl330_chan {
+	void				*pl330_chan_id;
+	enum dma_ch			id;
+	unsigned int			options;
+	unsigned long			sdaddr;
+	struct list_head		node;
+	struct pl330_req		*lrq;
+	struct list_head		xfer_list;
+	struct pl330_req		req[2];
+	s3c2410_dma_cbfn_t		callback_fn;
+	struct pl330_reqcfg		rqcfg;
+	struct s3c_pl330_xfer		*xfer_head;
+	struct s3c_pl330_dmac		*dmac;
+	struct s3c2410_dma_client	*client;
+};
+
+/* All DMACs in the platform */
+static LIST_HEAD(dmac_list);
+
+/* All channels to peripherals in the platform */
+static LIST_HEAD(chan_list);
+
+/*
+ * Since we add resources(DMACs and Channels) to the global pool,
+ * we need to guard access to the resources using a global lock
+ */
+static DEFINE_SPINLOCK(res_lock);
+
+/* Returns the channel with ID 'id' in the chan_list */
+static struct s3c_pl330_chan *id_to_chan(const enum dma_ch id)
+{
+	struct s3c_pl330_chan *ch;
+
+	list_for_each_entry(ch, &chan_list, node)
+		if (ch->id == id)
+			return ch;
+
+	return NULL;
+}
+
+/* Allocate a new channel with ID 'id' and add to chan_list */
+static void chan_add(const enum dma_ch id)
+{
+	struct s3c_pl330_chan *ch = id_to_chan(id);
+
+	/* Return if the channel already exists */
+	if (ch)
+		return;
+
+	ch = kmalloc(sizeof(*ch), GFP_KERNEL);
+	/* Return silently to work with other channels */
+	if (!ch)
+		return;
+
+	ch->id = id;
+	ch->dmac = NULL;
+
+	list_add_tail(&ch->node, &chan_list);
+}
+
+/* If the channel is not yet acquired by any client */
+static bool chan_free(struct s3c_pl330_chan *ch)
+{
+	if (!ch)
+		return false;
+
+	/* Channel points to some DMAC only when it's acquired */
+	return ch->dmac ? false : true;
+}
+
+/*
+ * Returns 0 is peripheral i/f is invalid or not present on the dmac.
+ * Index + 1, otherwise.
+ */
+static unsigned iface_of_dmac(struct s3c_pl330_dmac *dmac, enum dma_ch ch_id)
+{
+	enum dma_ch *id = dmac->peri;
+	int i;
+
+	/* Discount invalid markers */
+	if (ch_id == DMACH_MAX)
+		return 0;
+
+	for (i = 0; i < PL330_MAX_PERI; i++)
+		if (id[i] == ch_id)
+			return i + 1;
+
+	return 0;
+}
+
+/* If all channel threads of the DMAC are busy */
+static inline bool dmac_busy(struct s3c_pl330_dmac *dmac)
+{
+	struct pl330_info *pi = dmac->pi;
+
+	return (dmac->busy_chan < pi->pcfg.num_chan) ? false : true;
+}
+
+/*
+ * Returns the number of free channels that
+ * can be handled by this dmac only.
+ */
+static unsigned ch_onlyby_dmac(struct s3c_pl330_dmac *dmac)
+{
+	enum dma_ch *id = dmac->peri;
+	struct s3c_pl330_dmac *d;
+	struct s3c_pl330_chan *ch;
+	unsigned found, count = 0;
+	enum dma_ch p;
+	int i;
+
+	for (i = 0; i < PL330_MAX_PERI; i++) {
+		p = id[i];
+		ch = id_to_chan(p);
+
+		if (p == DMACH_MAX || !chan_free(ch))
+			continue;
+
+		found = 0;
+		list_for_each_entry(d, &dmac_list, node) {
+			if (d != dmac && iface_of_dmac(d, ch->id)) {
+				found = 1;
+				break;
+			}
+		}
+		if (!found)
+			count++;
+	}
+
+	return count;
+}
+
+/*
+ * Measure of suitability of 'dmac' handling 'ch'
+ *
+ * 0 indicates 'dmac' can not handle 'ch' either
+ * because it is not supported by the hardware or
+ * because all dmac channels are currently busy.
+ *
+ * >0 vlaue indicates 'dmac' has the capability.
+ * The bigger the value the more suitable the dmac.
+ */
+#define MAX_SUIT	UINT_MAX
+#define MIN_SUIT	0
+
+static unsigned suitablility(struct s3c_pl330_dmac *dmac,
+		struct s3c_pl330_chan *ch)
+{
+	struct pl330_info *pi = dmac->pi;
+	enum dma_ch *id = dmac->peri;
+	struct s3c_pl330_dmac *d;
+	unsigned s;
+	int i;
+
+	s = MIN_SUIT;
+	/* If all the DMAC channel threads are busy */
+	if (dmac_busy(dmac))
+		return s;
+
+	for (i = 0; i < PL330_MAX_PERI; i++)
+		if (id[i] == ch->id)
+			break;
+
+	/* If the 'dmac' can't talk to 'ch' */
+	if (i == PL330_MAX_PERI)
+		return s;
+
+	s = MAX_SUIT;
+	list_for_each_entry(d, &dmac_list, node) {
+		/*
+		 * If some other dmac can talk to this
+		 * peri and has some channel free.
+		 */
+		if (d != dmac && iface_of_dmac(d, ch->id) && !dmac_busy(d)) {
+			s = 0;
+			break;
+		}
+	}
+	if (s)
+		return s;
+
+	s = 100;
+
+	/* Good if free chans are more, bad otherwise */
+	s += (pi->pcfg.num_chan - dmac->busy_chan) - ch_onlyby_dmac(dmac);
+
+	return s;
+}
+
+/* More than one DMAC may have capability to transfer data with the
+ * peripheral. This function assigns most suitable DMAC to manage the
+ * channel and hence communicate with the peripheral.
+ */
+static struct s3c_pl330_dmac *map_chan_to_dmac(struct s3c_pl330_chan *ch)
+{
+	struct s3c_pl330_dmac *d, *dmac = NULL;
+	unsigned sn, sl = MIN_SUIT;
+
+	list_for_each_entry(d, &dmac_list, node) {
+		sn = suitablility(d, ch);
+
+		if (sn == MAX_SUIT)
+			return d;
+
+		if (sn > sl)
+			dmac = d;
+	}
+
+	return dmac;
+}
+
+/* Acquire the channel for peripheral 'id' */
+static struct s3c_pl330_chan *chan_acquire(const enum dma_ch id)
+{
+	struct s3c_pl330_chan *ch = id_to_chan(id);
+	struct s3c_pl330_dmac *dmac;
+
+	/* If the channel doesn't exist or is already acquired */
+	if (!ch || !chan_free(ch)) {
+		ch = NULL;
+		goto acq_exit;
+	}
+
+	dmac = map_chan_to_dmac(ch);
+	/* If couldn't map */
+	if (!dmac) {
+		ch = NULL;
+		goto acq_exit;
+	}
+
+	dmac->busy_chan++;
+	ch->dmac = dmac;
+
+acq_exit:
+	return ch;
+}
+
+/* Delete xfer from the queue */
+static inline void del_from_queue(struct s3c_pl330_xfer *xfer)
+{
+	struct s3c_pl330_xfer *t;
+	struct s3c_pl330_chan *ch;
+	int found;
+
+	if (!xfer)
+		return;
+
+	ch = xfer->chan;
+
+	/* Make sure xfer is in the queue */
+	found = 0;
+	list_for_each_entry(t, &ch->xfer_list, node)
+		if (t == xfer) {
+			found = 1;
+			break;
+		}
+
+	if (!found)
+		return;
+
+	/* If xfer is last entry in the queue */
+	if (xfer->node.next == &ch->xfer_list)
+		t = list_entry(ch->xfer_list.next,
+				struct s3c_pl330_xfer, node);
+	else
+		t = list_entry(xfer->node.next,
+				struct s3c_pl330_xfer, node);
+
+	/* If there was only one node left */
+	if (t == xfer)
+		ch->xfer_head = NULL;
+	else if (ch->xfer_head == xfer)
+		ch->xfer_head = t;
+
+	list_del(&xfer->node);
+}
+
+/* Provides pointer to the next xfer in the queue.
+ * If CIRCULAR option is set, the list is left intact,
+ * otherwise the xfer is removed from the list.
+ * Forced delete 'pluck' can be set to override the CIRCULAR option.
+ */
+static struct s3c_pl330_xfer *get_from_queue(struct s3c_pl330_chan *ch,
+		int pluck)
+{
+	struct s3c_pl330_xfer *xfer = ch->xfer_head;
+
+	if (!xfer)
+		return NULL;
+
+	/* If xfer is last entry in the queue */
+	if (xfer->node.next == &ch->xfer_list)
+		ch->xfer_head = list_entry(ch->xfer_list.next,
+					struct s3c_pl330_xfer, node);
+	else
+		ch->xfer_head = list_entry(xfer->node.next,
+					struct s3c_pl330_xfer, node);
+
+	if (pluck || !(ch->options & S3C2410_DMAF_CIRCULAR))
+		del_from_queue(xfer);
+
+	return xfer;
+}
+
+static inline void add_to_queue(struct s3c_pl330_chan *ch,
+		struct s3c_pl330_xfer *xfer, int front)
+{
+	struct pl330_xfer *xt;
+
+	/* If queue empty */
+	if (ch->xfer_head == NULL)
+		ch->xfer_head = xfer;
+
+	xt = &ch->xfer_head->px;
+	/* If the head already submitted (CIRCULAR head) */
+	if (ch->options & S3C2410_DMAF_CIRCULAR &&
+		(xt == ch->req[0].x || xt == ch->req[1].x))
+		ch->xfer_head = xfer;
+
+	/* If this is a resubmission, it should go at the head */
+	if (front) {
+		ch->xfer_head = xfer;
+		list_add(&xfer->node, &ch->xfer_list);
+	} else {
+		list_add_tail(&xfer->node, &ch->xfer_list);
+	}
+}
+
+static inline void _finish_off(struct s3c_pl330_xfer *xfer,
+		enum s3c2410_dma_buffresult res, int ffree)
+{
+	struct s3c_pl330_chan *ch;
+
+	if (!xfer)
+		return;
+
+	ch = xfer->chan;
+
+	/* Do callback */
+	if (ch->callback_fn)
+		ch->callback_fn(NULL, xfer->token, xfer->px.bytes, res);
+
+	/* Force Free or if buffer is not needed anymore */
+	if (ffree || !(ch->options & S3C2410_DMAF_CIRCULAR))
+		kmem_cache_free(ch->dmac->kmcache, xfer);
+}
+
+static inline int s3c_pl330_submit(struct s3c_pl330_chan *ch,
+		struct pl330_req *r)
+{
+	struct s3c_pl330_xfer *xfer;
+	int ret = 0;
+
+	/* If already submitted */
+	if (r->x)
+		return 0;
+
+	xfer = get_from_queue(ch, 0);
+	if (xfer) {
+		r->x = &xfer->px;
+
+		/* Use max bandwidth for M<->M xfers */
+		if (r->rqtype == MEMTOMEM) {
+			struct pl330_info *pi = xfer->chan->dmac->pi;
+			int burst = 1 << ch->rqcfg.brst_size;
+			u32 bytes = r->x->bytes;
+			int bl;
+
+			bl = pi->pcfg.data_bus_width / 8;
+			bl *= pi->pcfg.data_buf_dep;
+			bl /= burst;
+
+			/* src/dst_burst_len can't be more than 16 */
+			if (bl > 16)
+				bl = 16;
+
+			while (bl > 1) {
+				if (!(bytes % (bl * burst)))
+					break;
+				bl--;
+			}
+
+			ch->rqcfg.brst_len = bl;
+		} else {
+			ch->rqcfg.brst_len = 1;
+		}
+
+		ret = pl330_submit_req(ch->pl330_chan_id, r);
+
+		/* If submission was successful */
+		if (!ret) {
+			ch->lrq = r; /* latest submitted req */
+			return 0;
+		}
+
+		r->x = NULL;
+
+		/* If both of the PL330 ping-pong buffers filled */
+		if (ret == -EAGAIN) {
+			dev_err(ch->dmac->pi->dev, "%s:%d!\n",
+				__func__, __LINE__);
+			/* Queue back again */
+			add_to_queue(ch, xfer, 1);
+			ret = 0;
+		} else {
+			dev_err(ch->dmac->pi->dev, "%s:%d!\n",
+				__func__, __LINE__);
+			_finish_off(xfer, S3C2410_RES_ERR, 0);
+		}
+	}
+
+	return ret;
+}
+
+static void s3c_pl330_rq(struct s3c_pl330_chan *ch,
+	struct pl330_req *r, enum pl330_op_err err)
+{
+	unsigned long flags;
+	struct s3c_pl330_xfer *xfer;
+	struct pl330_xfer *xl = r->x;
+	enum s3c2410_dma_buffresult res;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	r->x = NULL;
+
+	s3c_pl330_submit(ch, r);
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	/* Map result to S3C DMA API */
+	if (err == PL330_ERR_NONE)
+		res = S3C2410_RES_OK;
+	else if (err == PL330_ERR_ABORT)
+		res = S3C2410_RES_ABORT;
+	else
+		res = S3C2410_RES_ERR;
+
+	/* If last request had some xfer */
+	if (xl) {
+		xfer = container_of(xl, struct s3c_pl330_xfer, px);
+		_finish_off(xfer, res, 0);
+	} else {
+		dev_info(ch->dmac->pi->dev, "%s:%d No Xfer?!\n",
+			__func__, __LINE__);
+	}
+}
+
+static void s3c_pl330_rq0(void *token, enum pl330_op_err err)
+{
+	struct pl330_req *r = token;
+	struct s3c_pl330_chan *ch = container_of(r,
+					struct s3c_pl330_chan, req[0]);
+	s3c_pl330_rq(ch, r, err);
+}
+
+static void s3c_pl330_rq1(void *token, enum pl330_op_err err)
+{
+	struct pl330_req *r = token;
+	struct s3c_pl330_chan *ch = container_of(r,
+					struct s3c_pl330_chan, req[1]);
+	s3c_pl330_rq(ch, r, err);
+}
+
+/* Release an acquired channel */
+static void chan_release(struct s3c_pl330_chan *ch)
+{
+	struct s3c_pl330_dmac *dmac;
+
+	if (chan_free(ch))
+		return;
+
+	dmac = ch->dmac;
+	ch->dmac = NULL;
+	dmac->busy_chan--;
+}
+
+int s3c2410_dma_ctrl(enum dma_ch id, enum s3c2410_chan_op op)
+{
+	struct s3c_pl330_xfer *xfer;
+	enum pl330_chan_op pl330op;
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int idx, ret;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch)) {
+		ret = -EINVAL;
+		goto ctrl_exit;
+	}
+
+	switch (op) {
+	case S3C2410_DMAOP_START:
+		/* Make sure both reqs are enqueued */
+		idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+		s3c_pl330_submit(ch, &ch->req[idx]);
+		s3c_pl330_submit(ch, &ch->req[1 - idx]);
+		pl330op = PL330_OP_START;
+		break;
+
+	case S3C2410_DMAOP_STOP:
+		pl330op = PL330_OP_ABORT;
+		break;
+
+	case S3C2410_DMAOP_FLUSH:
+		pl330op = PL330_OP_FLUSH;
+		break;
+
+	case S3C2410_DMAOP_PAUSE:
+	case S3C2410_DMAOP_RESUME:
+	case S3C2410_DMAOP_TIMEOUT:
+	case S3C2410_DMAOP_STARTED:
+		spin_unlock_irqrestore(&res_lock, flags);
+		return 0;
+
+	default:
+		spin_unlock_irqrestore(&res_lock, flags);
+		return -EINVAL;
+	}
+
+	ret = pl330_chan_ctrl(ch->pl330_chan_id, pl330op);
+
+	if (pl330op == PL330_OP_START) {
+		spin_unlock_irqrestore(&res_lock, flags);
+		return ret;
+	}
+
+	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+
+	/* Abort the current xfer */
+	if (ch->req[idx].x) {
+		xfer = container_of(ch->req[idx].x,
+				struct s3c_pl330_xfer, px);
+
+		/* Drop xfer during FLUSH */
+		if (pl330op == PL330_OP_FLUSH)
+			del_from_queue(xfer);
+
+		ch->req[idx].x = NULL;
+
+		spin_unlock_irqrestore(&res_lock, flags);
+		_finish_off(xfer, S3C2410_RES_ABORT,
+				pl330op == PL330_OP_FLUSH ? 1 : 0);
+		spin_lock_irqsave(&res_lock, flags);
+	}
+
+	/* Flush the whole queue */
+	if (pl330op == PL330_OP_FLUSH) {
+
+		if (ch->req[1 - idx].x) {
+			xfer = container_of(ch->req[1 - idx].x,
+					struct s3c_pl330_xfer, px);
+
+			del_from_queue(xfer);
+
+			ch->req[1 - idx].x = NULL;
+
+			spin_unlock_irqrestore(&res_lock, flags);
+			_finish_off(xfer, S3C2410_RES_ABORT, 1);
+			spin_lock_irqsave(&res_lock, flags);
+		}
+
+		/* Finish off the remaining in the queue */
+		xfer = ch->xfer_head;
+		while (xfer) {
+
+			del_from_queue(xfer);
+
+			spin_unlock_irqrestore(&res_lock, flags);
+			_finish_off(xfer, S3C2410_RES_ABORT, 1);
+			spin_lock_irqsave(&res_lock, flags);
+
+			xfer = ch->xfer_head;
+		}
+	}
+
+ctrl_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+int s3c2410_dma_enqueue(enum dma_ch id, void *token,
+			dma_addr_t addr, int size)
+{
+	struct s3c_pl330_chan *ch;
+	struct s3c_pl330_xfer *xfer;
+	unsigned long flags;
+	int idx, ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	/* Error if invalid or free channel */
+	if (!ch || chan_free(ch)) {
+		ret = -EINVAL;
+		goto enq_exit;
+	}
+
+	/* Error if size is unaligned */
+	if (ch->rqcfg.brst_size && size % (1 << ch->rqcfg.brst_size)) {
+		ret = -EINVAL;
+		goto enq_exit;
+	}
+
+	xfer = kmem_cache_alloc(ch->dmac->kmcache, GFP_ATOMIC);
+	if (!xfer) {
+		ret = -ENOMEM;
+		goto enq_exit;
+	}
+
+	xfer->token = token;
+	xfer->chan = ch;
+	xfer->px.bytes = size;
+	xfer->px.next = NULL; /* Single request */
+
+	/* For S3C DMA API, direction is always fixed for all xfers */
+	if (ch->req[0].rqtype == MEMTODEV) {
+		xfer->px.src_addr = addr;
+		xfer->px.dst_addr = ch->sdaddr;
+	} else {
+		xfer->px.src_addr = ch->sdaddr;
+		xfer->px.dst_addr = addr;
+	}
+
+	add_to_queue(ch, xfer, 0);
+
+	/* Try submitting on either request */
+	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+
+	if (!ch->req[idx].x)
+		s3c_pl330_submit(ch, &ch->req[idx]);
+	else
+		s3c_pl330_submit(ch, &ch->req[1 - idx]);
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	if (ch->options & S3C2410_DMAF_AUTOSTART)
+		s3c2410_dma_ctrl(id, S3C2410_DMAOP_START);
+
+	return 0;
+
+enq_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+int s3c2410_dma_request(enum dma_ch id,
+			struct s3c2410_dma_client *client,
+			void *dev)
+{
+	struct s3c_pl330_dmac *dmac;
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = chan_acquire(id);
+	if (!ch) {
+		ret = -EBUSY;
+		goto req_exit;
+	}
+
+	dmac = ch->dmac;
+
+	ch->pl330_chan_id = pl330_request_channel(dmac->pi);
+	if (!ch->pl330_chan_id) {
+		chan_release(ch);
+		ret = -EBUSY;
+		goto req_exit;
+	}
+
+	ch->client = client;
+	ch->options = 0; /* Clear any option */
+	ch->callback_fn = NULL; /* Clear any callback */
+	ch->lrq = NULL;
+
+	ch->rqcfg.brst_size = 2; /* Default word size */
+	ch->rqcfg.swap = SWAP_NO;
+	ch->rqcfg.scctl = SCCTRL0; /* Noncacheable and nonbufferable */
+	ch->rqcfg.dcctl = DCCTRL0; /* Noncacheable and nonbufferable */
+	ch->rqcfg.privileged = 0;
+	ch->rqcfg.insnaccess = 0;
+
+	/* Set invalid direction */
+	ch->req[0].rqtype = DEVTODEV;
+	ch->req[1].rqtype = ch->req[0].rqtype;
+
+	ch->req[0].cfg = &ch->rqcfg;
+	ch->req[1].cfg = ch->req[0].cfg;
+
+	ch->req[0].peri = iface_of_dmac(dmac, id) - 1; /* Original index */
+	ch->req[1].peri = ch->req[0].peri;
+
+	ch->req[0].token = &ch->req[0];
+	ch->req[0].xfer_cb = s3c_pl330_rq0;
+	ch->req[1].token = &ch->req[1];
+	ch->req[1].xfer_cb = s3c_pl330_rq1;
+
+	ch->req[0].x = NULL;
+	ch->req[1].x = NULL;
+
+	/* Reset xfer list */
+	INIT_LIST_HEAD(&ch->xfer_list);
+	ch->xfer_head = NULL;
+
+req_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+int s3c2410_dma_free(enum dma_ch id, struct s3c2410_dma_client *client)
+{
+	struct s3c_pl330_chan *ch;
+	struct s3c_pl330_xfer *xfer;
+	unsigned long flags;
+	int ret = 0;
+	unsigned idx;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch))
+		goto free_exit;
+
+	/* Refuse if someone else wanted to free the channel */
+	if (ch->client != client) {
+		ret = -EBUSY;
+		goto free_exit;
+	}
+
+	/* Stop any active xfer, Flushe the queue and do callbacks */
+	pl330_chan_ctrl(ch->pl330_chan_id, PL330_OP_FLUSH);
+
+	/* Abort the submitted requests */
+	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+
+	if (ch->req[idx].x) {
+		xfer = container_of(ch->req[idx].x,
+				struct s3c_pl330_xfer, px);
+
+		ch->req[idx].x = NULL;
+		del_from_queue(xfer);
+
+		spin_unlock_irqrestore(&res_lock, flags);
+		_finish_off(xfer, S3C2410_RES_ABORT, 1);
+		spin_lock_irqsave(&res_lock, flags);
+	}
+
+	if (ch->req[1 - idx].x) {
+		xfer = container_of(ch->req[1 - idx].x,
+				struct s3c_pl330_xfer, px);
+
+		ch->req[1 - idx].x = NULL;
+		del_from_queue(xfer);
+
+		spin_unlock_irqrestore(&res_lock, flags);
+		_finish_off(xfer, S3C2410_RES_ABORT, 1);
+		spin_lock_irqsave(&res_lock, flags);
+	}
+
+	/* Pluck and Abort the queued requests in order */
+	do {
+		xfer = get_from_queue(ch, 1);
+
+		spin_unlock_irqrestore(&res_lock, flags);
+		_finish_off(xfer, S3C2410_RES_ABORT, 1);
+		spin_lock_irqsave(&res_lock, flags);
+	} while (xfer);
+
+	ch->client = NULL;
+
+	pl330_release_channel(ch->pl330_chan_id);
+
+	ch->pl330_chan_id = NULL;
+
+	chan_release(ch);
+
+free_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+int s3c2410_dma_config(enum dma_ch id, int xferunit)
+{
+	struct s3c_pl330_chan *ch;
+	struct pl330_info *pi;
+	unsigned long flags;
+	int i, dbwidth, ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch)) {
+		ret = -EINVAL;
+		goto cfg_exit;
+	}
+
+	pi = ch->dmac->pi;
+	dbwidth = pi->pcfg.data_bus_width / 8;
+
+	/* Max size of xfer can be pcfg.data_bus_width */
+	if (xferunit > dbwidth) {
+		ret = -EINVAL;
+		goto cfg_exit;
+	}
+
+	i = 0;
+	while (xferunit != (1 << i))
+		i++;
+
+	/* If valid value */
+	if (xferunit == (1 << i))
+		ch->rqcfg.brst_size = i;
+	else
+		ret = -EINVAL;
+
+cfg_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+/* Options that are supported by this driver */
+#define S3C_PL330_FLAGS (S3C2410_DMAF_CIRCULAR | S3C2410_DMAF_AUTOSTART)
+
+int s3c2410_dma_setflags(enum dma_ch id, unsigned int options)
+{
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch) || options & ~(S3C_PL330_FLAGS))
+		ret = -EINVAL;
+	else
+		ch->options = options;
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_setflags);
+
+int s3c2410_dma_set_buffdone_fn(enum dma_ch id, s3c2410_dma_cbfn_t rtn)
+{
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch))
+		ret = -EINVAL;
+	else
+		ch->callback_fn = rtn;
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+int s3c2410_dma_devconfig(enum dma_ch id, enum s3c2410_dmasrc source,
+			  unsigned long address)
+{
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch)) {
+		ret = -EINVAL;
+		goto devcfg_exit;
+	}
+
+	switch (source) {
+	case S3C2410_DMASRC_HW: /* P->M */
+		ch->req[0].rqtype = DEVTOMEM;
+		ch->req[1].rqtype = DEVTOMEM;
+		ch->rqcfg.src_inc = 0;
+		ch->rqcfg.dst_inc = 1;
+		break;
+	case S3C2410_DMASRC_MEM: /* M->P */
+		ch->req[0].rqtype = MEMTODEV;
+		ch->req[1].rqtype = MEMTODEV;
+		ch->rqcfg.src_inc = 1;
+		ch->rqcfg.dst_inc = 0;
+		break;
+	default:
+		ret = -EINVAL;
+		goto devcfg_exit;
+	}
+
+	ch->sdaddr = address;
+
+devcfg_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+int s3c2410_dma_getposition(enum dma_ch id, dma_addr_t *src, dma_addr_t *dst)
+{
+	struct s3c_pl330_chan *ch = id_to_chan(id);
+	struct pl330_chanstatus status;
+	int ret;
+
+	if (!ch || chan_free(ch))
+		return -EINVAL;
+
+	ret = pl330_chan_status(ch->pl330_chan_id, &status);
+	if (ret < 0)
+		return ret;
+
+	*src = status.src_addr;
+	*dst = status.dst_addr;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+static irqreturn_t pl330_irq_handler(int irq, void *data)
+{
+	if (pl330_update(data))
+		return IRQ_HANDLED;
+	else
+		return IRQ_NONE;
+}
+
+static int pl330_probe(struct platform_device *pdev)
+{
+	struct s3c_pl330_dmac *s3c_pl330_dmac;
+	struct s3c_pl330_platdata *pl330pd;
+	struct pl330_info *pl330_info;
+	struct resource *res;
+	int i, ret, irq;
+
+	pl330pd = pdev->dev.platform_data;
+
+	/* Can't do without the list of _32_ peripherals */
+	if (!pl330pd || !pl330pd->peri) {
+		dev_err(&pdev->dev, "platform data missing!\n");
+		return -ENODEV;
+	}
+
+	pl330_info = kzalloc(sizeof(*pl330_info), GFP_KERNEL);
+	if (!pl330_info)
+		return -ENOMEM;
+
+	pl330_info->pl330_data = NULL;
+	pl330_info->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		goto probe_err1;
+	}
+
+	request_mem_region(res->start, resource_size(res), pdev->name);
+
+	pl330_info->base = ioremap(res->start, resource_size(res));
+	if (!pl330_info->base) {
+		ret = -ENXIO;
+		goto probe_err2;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto probe_err3;
+	}
+
+	ret = request_irq(irq, pl330_irq_handler, 0,
+			dev_name(&pdev->dev), pl330_info);
+	if (ret)
+		goto probe_err4;
+
+	ret = pl330_add(pl330_info);
+	if (ret)
+		goto probe_err5;
+
+	/* Allocate a new DMAC */
+	s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL);
+	if (!s3c_pl330_dmac) {
+		ret = -ENOMEM;
+		goto probe_err6;
+	}
+
+	/* Hook the info */
+	s3c_pl330_dmac->pi = pl330_info;
+
+	/* No busy channels */
+	s3c_pl330_dmac->busy_chan = 0;
+
+	s3c_pl330_dmac->kmcache = kmem_cache_create(dev_name(&pdev->dev),
+				sizeof(struct s3c_pl330_xfer), 0, 0, NULL);
+
+	if (!s3c_pl330_dmac->kmcache) {
+		ret = -ENOMEM;
+		goto probe_err7;
+	}
+
+	/* Get the list of peripherals */
+	s3c_pl330_dmac->peri = pl330pd->peri;
+
+	/* Attach to the list of DMACs */
+	list_add_tail(&s3c_pl330_dmac->node, &dmac_list);
+
+	/* Create a channel for each peripheral in the DMAC
+	 * that is, if it doesn't already exist
+	 */
+	for (i = 0; i < PL330_MAX_PERI; i++)
+		if (s3c_pl330_dmac->peri[i] != DMACH_MAX)
+			chan_add(s3c_pl330_dmac->peri[i]);
+
+	printk(KERN_INFO
+		"Loaded driver for PL330 DMAC-%d %s\n",	pdev->id, pdev->name);
+	printk(KERN_INFO
+		"\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
+		pl330_info->pcfg.data_buf_dep,
+		pl330_info->pcfg.data_bus_width / 8, pl330_info->pcfg.num_chan,
+		pl330_info->pcfg.num_peri, pl330_info->pcfg.num_events);
+
+	return 0;
+
+probe_err7:
+	kfree(s3c_pl330_dmac);
+probe_err6:
+	pl330_del(pl330_info);
+probe_err5:
+	free_irq(irq, pl330_info);
+probe_err4:
+probe_err3:
+	iounmap(pl330_info->base);
+probe_err2:
+	release_mem_region(res->start, resource_size(res));
+probe_err1:
+	kfree(pl330_info);
+
+	return ret;
+}
+
+static int pl330_remove(struct platform_device *pdev)
+{
+	struct s3c_pl330_dmac *dmac, *d;
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int del, found;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	found = 0;
+	list_for_each_entry(d, &dmac_list, node)
+		if (d->pi->dev == &pdev->dev) {
+			found = 1;
+			break;
+		}
+
+	if (!found) {
+		spin_unlock_irqrestore(&res_lock, flags);
+		return 0;
+	}
+
+	dmac = d;
+
+	/* Remove all Channels that are managed only by this DMAC */
+	list_for_each_entry(ch, &chan_list, node) {
+
+		/* Only channels that are handled by this DMAC */
+		if (iface_of_dmac(dmac, ch->id))
+			del = 1;
+		else
+			continue;
+
+		/* Don't remove if some other DMAC has it too */
+		list_for_each_entry(d, &dmac_list, node)
+			if (d != dmac && iface_of_dmac(d, ch->id)) {
+				del = 0;
+				break;
+			}
+
+		if (del) {
+			spin_unlock_irqrestore(&res_lock, flags);
+			s3c2410_dma_free(ch->id, ch->client);
+			spin_lock_irqsave(&res_lock, flags);
+			list_del(&ch->node);
+			kfree(ch);
+		}
+	}
+
+	/* Remove the DMAC */
+	list_del(&dmac->node);
+	kfree(dmac);
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return 0;
+}
+
+static struct platform_driver pl330_driver = {
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "s3c-pl330",
+	},
+	.probe		= pl330_probe,
+	.remove		= pl330_remove,
+};
+
+static int __init pl330_init(void)
+{
+	return platform_driver_register(&pl330_driver);
+}
+module_init(pl330_init);
+
+static void __exit pl330_exit(void)
+{
+	platform_driver_unregister(&pl330_driver);
+	return;
+}
+module_exit(pl330_exit);
+
+MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("Driver for PL330 DMA Controller");
+MODULE_LICENSE("GPL");