Commit 1f08673e authored by Thomas Petazzoni's avatar Thomas Petazzoni Committed by Lorenzo Pieralisi

PCI: mvebu: Convert to PCI emulated bridge config space

Convert the pci-mvebu driver to use the pci-bridge-emul logic, that
helps emulating a root port PCI bridge configuration space.
Signed-off-by: default avatarThomas Petazzoni <thomas.petazzoni@bootlin.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
parent eae6aaf8
......@@ -9,6 +9,7 @@ config PCI_MVEBU
depends on MVEBU_MBUS
depends on ARM
depends on OF
select PCI_BRIDGE_EMUL
config PCI_AARDVARK
bool "Aardvark PCIe controller"
......
......@@ -22,6 +22,7 @@
#include <linux/of_platform.h>
#include "../pci.h"
#include "../pci-bridge-emul.h"
/*
* PCIe unit register offsets.
......@@ -63,56 +64,6 @@
#define PCIE_DEBUG_CTRL 0x1a60
#define PCIE_DEBUG_SOFT_RESET BIT(20)
enum {
PCISWCAP = PCI_BRIDGE_CONTROL + 2,
PCISWCAP_EXP_LIST_ID = PCISWCAP + PCI_CAP_LIST_ID,
PCISWCAP_EXP_DEVCAP = PCISWCAP + PCI_EXP_DEVCAP,
PCISWCAP_EXP_DEVCTL = PCISWCAP + PCI_EXP_DEVCTL,
PCISWCAP_EXP_LNKCAP = PCISWCAP + PCI_EXP_LNKCAP,
PCISWCAP_EXP_LNKCTL = PCISWCAP + PCI_EXP_LNKCTL,
PCISWCAP_EXP_SLTCAP = PCISWCAP + PCI_EXP_SLTCAP,
PCISWCAP_EXP_SLTCTL = PCISWCAP + PCI_EXP_SLTCTL,
PCISWCAP_EXP_RTCTL = PCISWCAP + PCI_EXP_RTCTL,
PCISWCAP_EXP_RTSTA = PCISWCAP + PCI_EXP_RTSTA,
PCISWCAP_EXP_DEVCAP2 = PCISWCAP + PCI_EXP_DEVCAP2,
PCISWCAP_EXP_DEVCTL2 = PCISWCAP + PCI_EXP_DEVCTL2,
PCISWCAP_EXP_LNKCAP2 = PCISWCAP + PCI_EXP_LNKCAP2,
PCISWCAP_EXP_LNKCTL2 = PCISWCAP + PCI_EXP_LNKCTL2,
PCISWCAP_EXP_SLTCAP2 = PCISWCAP + PCI_EXP_SLTCAP2,
PCISWCAP_EXP_SLTCTL2 = PCISWCAP + PCI_EXP_SLTCTL2,
};
/* PCI configuration space of a PCI-to-PCI bridge */
struct mvebu_sw_pci_bridge {
u16 vendor;
u16 device;
u16 command;
u16 status;
u16 class;
u8 interface;
u8 revision;
u8 bist;
u8 header_type;
u8 latency_timer;
u8 cache_line_size;
u32 bar[2];
u8 primary_bus;
u8 secondary_bus;
u8 subordinate_bus;
u8 secondary_latency_timer;
u8 iobase;
u8 iolimit;
u16 secondary_status;
u16 membase;
u16 memlimit;
u16 iobaseupper;
u16 iolimitupper;
u32 romaddr;
u8 intline;
u8 intpin;
u16 bridgectrl;
};
struct mvebu_pcie_port;
/* Structure representing all PCIe interfaces */
......@@ -148,7 +99,7 @@ struct mvebu_pcie_port {
struct clk *clk;
struct gpio_desc *reset_gpio;
char *reset_name;
struct mvebu_sw_pci_bridge bridge;
struct pci_bridge_emul bridge;
struct device_node *dn;
struct mvebu_pcie *pcie;
struct mvebu_pcie_window memwin;
......@@ -410,11 +361,12 @@ static void mvebu_pcie_set_window(struct mvebu_pcie_port *port,
static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
{
struct mvebu_pcie_window desired = {};
struct pci_bridge_emul_conf *conf = &port->bridge.conf;
/* Are the new iobase/iolimit values invalid? */
if (port->bridge.iolimit < port->bridge.iobase ||
port->bridge.iolimitupper < port->bridge.iobaseupper ||
!(port->bridge.command & PCI_COMMAND_IO)) {
if (conf->iolimit < conf->iobase ||
conf->iolimitupper < conf->iobaseupper ||
!(conf->command & PCI_COMMAND_IO)) {
mvebu_pcie_set_window(port, port->io_target, port->io_attr,
&desired, &port->iowin);
return;
......@@ -433,11 +385,11 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
* specifications. iobase is the bus address, port->iowin_base
* is the CPU address.
*/
desired.remap = ((port->bridge.iobase & 0xF0) << 8) |
(port->bridge.iobaseupper << 16);
desired.remap = ((conf->iobase & 0xF0) << 8) |
(conf->iobaseupper << 16);
desired.base = port->pcie->io.start + desired.remap;
desired.size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) |
(port->bridge.iolimitupper << 16)) -
desired.size = ((0xFFF | ((conf->iolimit & 0xF0) << 8) |
(conf->iolimitupper << 16)) -
desired.remap) +
1;
......@@ -448,10 +400,11 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
{
struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP};
struct pci_bridge_emul_conf *conf = &port->bridge.conf;
/* Are the new membase/memlimit values invalid? */
if (port->bridge.memlimit < port->bridge.membase ||
!(port->bridge.command & PCI_COMMAND_MEMORY)) {
if (conf->memlimit < conf->membase ||
!(conf->command & PCI_COMMAND_MEMORY)) {
mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
&desired, &port->memwin);
return;
......@@ -463,129 +416,32 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
* window to setup, according to the PCI-to-PCI bridge
* specifications.
*/
desired.base = ((port->bridge.membase & 0xFFF0) << 16);
desired.size = (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
desired.base = ((conf->membase & 0xFFF0) << 16);
desired.size = (((conf->memlimit & 0xFFF0) << 16) | 0xFFFFF) -
desired.base + 1;
mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
&port->memwin);
}
/*
* Initialize the configuration space of the PCI-to-PCI bridge
* associated with the given PCIe interface.
*/
static void mvebu_sw_pci_bridge_init(struct mvebu_pcie_port *port)
static pci_bridge_emul_read_status_t
mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
int reg, u32 *value)
{
struct mvebu_sw_pci_bridge *bridge = &port->bridge;
memset(bridge, 0, sizeof(struct mvebu_sw_pci_bridge));
bridge->class = PCI_CLASS_BRIDGE_PCI;
bridge->vendor = PCI_VENDOR_ID_MARVELL;
bridge->device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
bridge->revision = mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff;
bridge->header_type = PCI_HEADER_TYPE_BRIDGE;
bridge->cache_line_size = 0x10;
/* We support 32 bits I/O addressing */
bridge->iobase = PCI_IO_RANGE_TYPE_32;
bridge->iolimit = PCI_IO_RANGE_TYPE_32;
/* Add capabilities */
bridge->status = PCI_STATUS_CAP_LIST;
}
/*
* Read the configuration space of the PCI-to-PCI bridge associated to
* the given PCIe interface.
*/
static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port,
unsigned int where, int size, u32 *value)
{
struct mvebu_sw_pci_bridge *bridge = &port->bridge;
switch (where & ~3) {
case PCI_VENDOR_ID:
*value = bridge->device << 16 | bridge->vendor;
break;
case PCI_COMMAND:
*value = bridge->command | bridge->status << 16;
break;
case PCI_CLASS_REVISION:
*value = bridge->class << 16 | bridge->interface << 8 |
bridge->revision;
break;
case PCI_CACHE_LINE_SIZE:
*value = bridge->bist << 24 | bridge->header_type << 16 |
bridge->latency_timer << 8 | bridge->cache_line_size;
break;
case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
*value = bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4];
break;
case PCI_PRIMARY_BUS:
*value = (bridge->secondary_latency_timer << 24 |
bridge->subordinate_bus << 16 |
bridge->secondary_bus << 8 |
bridge->primary_bus);
break;
case PCI_IO_BASE:
if (!mvebu_has_ioport(port))
*value = bridge->secondary_status << 16;
else
*value = (bridge->secondary_status << 16 |
bridge->iolimit << 8 |
bridge->iobase);
break;
case PCI_MEMORY_BASE:
*value = (bridge->memlimit << 16 | bridge->membase);
break;
case PCI_PREF_MEMORY_BASE:
*value = 0;
break;
case PCI_IO_BASE_UPPER16:
*value = (bridge->iolimitupper << 16 | bridge->iobaseupper);
break;
case PCI_CAPABILITY_LIST:
*value = PCISWCAP;
break;
struct mvebu_pcie_port *port = bridge->data;
case PCI_ROM_ADDRESS1:
*value = 0;
break;
case PCI_INTERRUPT_LINE:
/* LINE PIN MIN_GNT MAX_LAT */
*value = 0;
break;
case PCISWCAP_EXP_LIST_ID:
/* Set PCIe v2, root port, slot support */
*value = (PCI_EXP_TYPE_ROOT_PORT << 4 | 2 |
PCI_EXP_FLAGS_SLOT) << 16 | PCI_CAP_ID_EXP;
break;
case PCISWCAP_EXP_DEVCAP:
switch (reg) {
case PCI_EXP_DEVCAP:
*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP);
break;
case PCISWCAP_EXP_DEVCTL:
case PCI_EXP_DEVCTL:
*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL) &
~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
break;
case PCISWCAP_EXP_LNKCAP:
case PCI_EXP_LNKCAP:
/*
* PCIe requires the clock power management capability to be
* hard-wired to zero for downstream ports
......@@ -594,168 +450,140 @@ static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port,
~PCI_EXP_LNKCAP_CLKPM;
break;
case PCISWCAP_EXP_LNKCTL:
case PCI_EXP_LNKCTL:
*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
break;
case PCISWCAP_EXP_SLTCTL:
case PCI_EXP_SLTCTL:
*value = PCI_EXP_SLTSTA_PDS << 16;
break;
case PCISWCAP_EXP_RTSTA:
case PCI_EXP_RTSTA:
*value = mvebu_readl(port, PCIE_RC_RTSTA);
break;
/* PCIe requires the v2 fields to be hard-wired to zero */
case PCISWCAP_EXP_DEVCAP2:
case PCISWCAP_EXP_DEVCTL2:
case PCISWCAP_EXP_LNKCAP2:
case PCISWCAP_EXP_LNKCTL2:
case PCISWCAP_EXP_SLTCAP2:
case PCISWCAP_EXP_SLTCTL2:
default:
/*
* PCI defines configuration read accesses to reserved or
* unimplemented registers to read as zero and complete
* normally.
*/
*value = 0;
return PCIBIOS_SUCCESSFUL;
return PCI_BRIDGE_EMUL_NOT_HANDLED;
}
if (size == 2)
*value = (*value >> (8 * (where & 3))) & 0xffff;
else if (size == 1)
*value = (*value >> (8 * (where & 3))) & 0xff;
return PCIBIOS_SUCCESSFUL;
return PCI_BRIDGE_EMUL_HANDLED;
}
/* Write to the PCI-to-PCI bridge configuration space */
static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port,
unsigned int where, int size, u32 value)
static void
mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
int reg, u32 old, u32 new, u32 mask)
{
struct mvebu_sw_pci_bridge *bridge = &port->bridge;
u32 mask, reg;
int err;
if (size == 4)
mask = 0x0;
else if (size == 2)
mask = ~(0xffff << ((where & 3) * 8));
else if (size == 1)
mask = ~(0xff << ((where & 3) * 8));
else
return PCIBIOS_BAD_REGISTER_NUMBER;
struct mvebu_pcie_port *port = bridge->data;
struct pci_bridge_emul_conf *conf = &bridge->conf;
err = mvebu_sw_pci_bridge_read(port, where & ~3, 4, &reg);
if (err)
return err;
value = (reg & mask) | value << ((where & 3) * 8);
switch (where & ~3) {
switch (reg) {
case PCI_COMMAND:
{
u32 old = bridge->command;
if (!mvebu_has_ioport(port))
value &= ~PCI_COMMAND_IO;
conf->command &= ~PCI_COMMAND_IO;
bridge->command = value & 0xffff;
if ((old ^ bridge->command) & PCI_COMMAND_IO)
if ((old ^ new) & PCI_COMMAND_IO)
mvebu_pcie_handle_iobase_change(port);
if ((old ^ bridge->command) & PCI_COMMAND_MEMORY)
if ((old ^ new) & PCI_COMMAND_MEMORY)
mvebu_pcie_handle_membase_change(port);
break;
}
case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4] = value;
break;
}
case PCI_IO_BASE:
/*
* We also keep bit 1 set, it is a read-only bit that
* We keep bit 1 set, it is a read-only bit that
* indicates we support 32 bits addressing for the
* I/O
*/
bridge->iobase = (value & 0xff) | PCI_IO_RANGE_TYPE_32;
bridge->iolimit = ((value >> 8) & 0xff) | PCI_IO_RANGE_TYPE_32;
conf->iobase |= PCI_IO_RANGE_TYPE_32;
conf->iolimit |= PCI_IO_RANGE_TYPE_32;
mvebu_pcie_handle_iobase_change(port);
break;
case PCI_MEMORY_BASE:
bridge->membase = value & 0xffff;
bridge->memlimit = value >> 16;
mvebu_pcie_handle_membase_change(port);
break;
case PCI_IO_BASE_UPPER16:
bridge->iobaseupper = value & 0xffff;
bridge->iolimitupper = value >> 16;
mvebu_pcie_handle_iobase_change(port);
break;
case PCI_PRIMARY_BUS:
bridge->primary_bus = value & 0xff;
bridge->secondary_bus = (value >> 8) & 0xff;
bridge->subordinate_bus = (value >> 16) & 0xff;
bridge->secondary_latency_timer = (value >> 24) & 0xff;
mvebu_pcie_set_local_bus_nr(port, bridge->secondary_bus);
mvebu_pcie_set_local_bus_nr(port, conf->secondary_bus);
break;
case PCISWCAP_EXP_DEVCTL:
default:
break;
}
}
static void
mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
int reg, u32 old, u32 new, u32 mask)
{
struct mvebu_pcie_port *port = bridge->data;
switch (reg) {
case PCI_EXP_DEVCTL:
/*
* Armada370 data says these bits must always
* be zero when in root complex mode.
*/
value &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
/*
* If the mask is 0xffff0000, then we only want to write
* the device control register, rather than clearing the
* RW1C bits in the device status register. Mask out the
* status register bits.
*/
if (mask == 0xffff0000)
value &= 0xffff;
new &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
break;
case PCISWCAP_EXP_LNKCTL:
case PCI_EXP_LNKCTL:
/*
* If we don't support CLKREQ, we must ensure that the
* CLKREQ enable bit always reads zero. Since we haven't
* had this capability, and it's dependent on board wiring,
* disable it for the time being.
*/
value &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
/*
* If the mask is 0xffff0000, then we only want to write
* the link control register, rather than clearing the
* RW1C bits in the link status register. Mask out the
* RW1C status register bits.
*/
if (mask == 0xffff0000)
value &= ~((PCI_EXP_LNKSTA_LABS |
PCI_EXP_LNKSTA_LBMS) << 16);
new &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
break;
case PCISWCAP_EXP_RTSTA:
mvebu_writel(port, value, PCIE_RC_RTSTA);
case PCI_EXP_RTSTA:
mvebu_writel(port, new, PCIE_RC_RTSTA);
break;
}
}
default:
break;
struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = {
.write_base = mvebu_pci_bridge_emul_base_conf_write,
.read_pcie = mvebu_pci_bridge_emul_pcie_conf_read,
.write_pcie = mvebu_pci_bridge_emul_pcie_conf_write,
};
/*
* Initialize the configuration space of the PCI-to-PCI bridge
* associated with the given PCIe interface.
*/
static void mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
{
struct pci_bridge_emul *bridge = &port->bridge;
bridge->conf.vendor = PCI_VENDOR_ID_MARVELL;
bridge->conf.device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
bridge->conf.class_revision =
mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff;
if (mvebu_has_ioport(port)) {
/* We support 32 bits I/O addressing */
bridge->conf.iobase = PCI_IO_RANGE_TYPE_32;
bridge->conf.iolimit = PCI_IO_RANGE_TYPE_32;
}
return PCIBIOS_SUCCESSFUL;
bridge->has_pcie = true;
bridge->data = port;
bridge->ops = &mvebu_pci_bridge_emul_ops;
pci_bridge_emul_init(bridge);
}
static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)
......@@ -775,8 +603,8 @@ static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
if (bus->number == 0 && port->devfn == devfn)
return port;
if (bus->number != 0 &&
bus->number >= port->bridge.secondary_bus &&
bus->number <= port->bridge.subordinate_bus)
bus->number >= port->bridge.conf.secondary_bus &&
bus->number <= port->bridge.conf.subordinate_bus)
return port;
}
......@@ -797,7 +625,8 @@ static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
/* Access the emulated PCI-to-PCI bridge */
if (bus->number == 0)
return mvebu_sw_pci_bridge_write(port, where, size, val);
return pci_bridge_emul_conf_write(&port->bridge, where,
size, val);
if (!mvebu_pcie_link_up(port))
return PCIBIOS_DEVICE_NOT_FOUND;
......@@ -825,7 +654,8 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
/* Access the emulated PCI-to-PCI bridge */
if (bus->number == 0)
return mvebu_sw_pci_bridge_read(port, where, size, val);
return pci_bridge_emul_conf_read(&port->bridge, where,
size, val);
if (!mvebu_pcie_link_up(port)) {
*val = 0xffffffff;
......@@ -1239,7 +1069,7 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
mvebu_pcie_setup_hw(port);
mvebu_pcie_set_local_dev_nr(port, 1);
mvebu_sw_pci_bridge_init(port);
mvebu_pci_bridge_emul_init(port);
}
pcie->nports = i;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment