Merge tag 'master-2014-11-04' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

John W. Linville says:

====================
pull request: wireless 2014-11-06

Please pull this batch of fixes intended for the 3.18 stream...

For the mac80211 bits, Johannes says:

"This contains another small set of fixes for 3.18, these are all
over the place and most of the bugs are old, one even dates back
to the original mac80211 we merged into the kernel."

For the iwlwifi bits, Emmanuel says:

"I fix here two issues that are related to the firmware
loading flow. A user reported that he couldn't load the
driver because the rfkill line was pulled up while we
were running the calibrations. This was happening while
booting the system: systemd was restoring the "disable
wifi settings" and that raised an RFKILL interrupt during
the calibration. Our driver didn't handle that properly
and this is now fixed."

Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/wireless/iwlwifi/mvm/fw.c

@@ -284,7 +284,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 
 	lockdep_assert_held(&mvm->mutex);
 
-	if (WARN_ON_ONCE(mvm->init_ucode_complete))
+	if (WARN_ON_ONCE(mvm->init_ucode_complete || mvm->calibrating))
 		return 0;
 
 	iwl_init_notification_wait(&mvm->notif_wait,
@@ -334,6 +334,8 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 		goto out;
 	}
 
+	mvm->calibrating = true;
+
 	/* Send TX valid antennas before triggering calibrations */
 	ret = iwl_send_tx_ant_cfg(mvm, mvm->fw->valid_tx_ant);
 	if (ret)
@@ -358,11 +360,17 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 			MVM_UCODE_CALIB_TIMEOUT);
 	if (!ret)
 		mvm->init_ucode_complete = true;
+
+	if (ret && iwl_mvm_is_radio_killed(mvm)) {
+		IWL_DEBUG_RF_KILL(mvm, "RFKILL while calibrating.\n");
+		ret = 1;
+	}
 	goto out;
 
 error:
 	iwl_remove_notification(&mvm->notif_wait, &calib_wait);
 out:
+	mvm->calibrating = false;
 	if (iwlmvm_mod_params.init_dbg && !mvm->nvm_data) {
 		/* we want to debug INIT and we have no NVM - fake */
 		mvm->nvm_data = kzalloc(sizeof(struct iwl_nvm_data) +

drivers/net/wireless/iwlwifi/mvm/mac80211.c

@@ -788,6 +788,7 @@ static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm)
 
 	mvm->scan_status = IWL_MVM_SCAN_NONE;
 	mvm->ps_disabled = false;
+	mvm->calibrating = false;
 
 	/* just in case one was running */
 	ieee80211_remain_on_channel_expired(mvm->hw);

drivers/net/wireless/iwlwifi/mvm/mvm.h

@@ -548,6 +548,7 @@ struct iwl_mvm {
 	enum iwl_ucode_type cur_ucode;
 	bool ucode_loaded;
 	bool init_ucode_complete;
+	bool calibrating;
 	u32 error_event_table;
 	u32 log_event_table;
 	u32 umac_error_event_table;

drivers/net/wireless/iwlwifi/mvm/ops.c

@@ -424,6 +424,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 	}
 	mvm->sf_state = SF_UNINIT;
 	mvm->low_latency_agg_frame_limit = 6;
+	mvm->cur_ucode = IWL_UCODE_INIT;
 
 	mutex_init(&mvm->mutex);
 	mutex_init(&mvm->d0i3_suspend_mutex);
@@ -752,6 +753,7 @@ void iwl_mvm_set_hw_ctkill_state(struct iwl_mvm *mvm, bool state)
 static bool iwl_mvm_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
 {
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
+	bool calibrating = ACCESS_ONCE(mvm->calibrating);
 
 	if (state)
 		set_bit(IWL_MVM_STATUS_HW_RFKILL, &mvm->status);
@@ -760,7 +762,15 @@ static bool iwl_mvm_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
 
 	wiphy_rfkill_set_hw_state(mvm->hw->wiphy, iwl_mvm_is_radio_killed(mvm));
 
-	return state && mvm->cur_ucode != IWL_UCODE_INIT;
+	/* iwl_run_init_mvm_ucode is waiting for results, abort it */
+	if (calibrating)
+		iwl_abort_notification_waits(&mvm->notif_wait);
+
+	/*
+	 * Stop the device if we run OPERATIONAL firmware or if we are in the
+	 * middle of the calibrations.
+	 */
+	return state && (mvm->cur_ucode != IWL_UCODE_INIT || calibrating);
 }
 
 static void iwl_mvm_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb)

drivers/net/wireless/iwlwifi/pcie/trans.c

@@ -915,7 +915,8 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 	 * restart. So don't process again if the device is
 	 * already dead.
 	 */
-	if (test_bit(STATUS_DEVICE_ENABLED, &trans->status)) {
+	if (test_and_clear_bit(STATUS_DEVICE_ENABLED, &trans->status)) {
+		IWL_DEBUG_INFO(trans, "DEVICE_ENABLED bit was set and is now cleared\n");
 		iwl_pcie_tx_stop(trans);
 		iwl_pcie_rx_stop(trans);
 
@@ -945,7 +946,6 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 	/* clear all status bits */
 	clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
 	clear_bit(STATUS_INT_ENABLED, &trans->status);
-	clear_bit(STATUS_DEVICE_ENABLED, &trans->status);
 	clear_bit(STATUS_TPOWER_PMI, &trans->status);
 	clear_bit(STATUS_RFKILL, &trans->status);
 

drivers/net/wireless/mac80211_hwsim.c

@@ -1987,7 +1987,7 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 	if (err != 0) {
 		printk(KERN_DEBUG "mac80211_hwsim: device_bind_driver failed (%d)\n",
 		       err);
-		goto failed_hw;
+		goto failed_bind;
 	}
 
 	skb_queue_head_init(&data->pending);
@@ -2183,6 +2183,8 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2,
 	return idx;
 
 failed_hw:
+	device_release_driver(data->dev);
+failed_bind:
 	device_unregister(data->dev);
 failed_drvdata:
 	ieee80211_free_hw(hw);

net/mac80211/ibss.c

@@ -805,7 +805,7 @@ ieee80211_ibss_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 
 	memset(&params, 0, sizeof(params));
 	memset(&csa_ie, 0, sizeof(csa_ie));
-	err = ieee80211_parse_ch_switch_ie(sdata, elems, beacon,
+	err = ieee80211_parse_ch_switch_ie(sdata, elems,
 					   ifibss->chandef.chan->band,
 					   sta_flags, ifibss->bssid, &csa_ie);
 	/* can't switch to destination channel, fail */

net/mac80211/ieee80211_i.h

@@ -1642,7 +1642,6 @@ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
  * ieee80211_parse_ch_switch_ie - parses channel switch IEs
  * @sdata: the sdata of the interface which has received the frame
  * @elems: parsed 802.11 elements received with the frame
- * @beacon: indicates if the frame was a beacon or probe response
  * @current_band: indicates the current band
  * @sta_flags: contains information about own capabilities and restrictions
  *	to decide which channel switch announcements can be accepted. Only the
@@ -1656,7 +1655,7 @@ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
  * Return: 0 on success, <0 on error and >0 if there is nothing to parse.
  */
 int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
-				 struct ieee802_11_elems *elems, bool beacon,
+				 struct ieee802_11_elems *elems,
 				 enum ieee80211_band current_band,
 				 u32 sta_flags, u8 *bssid,
 				 struct ieee80211_csa_ie *csa_ie);

net/mac80211/iface.c

@@ -766,10 +766,12 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 	int i, flushed;
 	struct ps_data *ps;
 	struct cfg80211_chan_def chandef;
+	bool cancel_scan;
 
 	clear_bit(SDATA_STATE_RUNNING, &sdata->state);
 
-	if (rcu_access_pointer(local->scan_sdata) == sdata)
+	cancel_scan = rcu_access_pointer(local->scan_sdata) == sdata;
+	if (cancel_scan)
 		ieee80211_scan_cancel(local);
 
 	/*
@@ -898,6 +900,8 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		list_del(&sdata->u.vlan.list);
 		mutex_unlock(&local->mtx);
 		RCU_INIT_POINTER(sdata->vif.chanctx_conf, NULL);
+		/* see comment in the default case below */
+		ieee80211_free_keys(sdata, true);
 		/* no need to tell driver */
 		break;
 	case NL80211_IFTYPE_MONITOR:
@@ -923,17 +927,16 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		/*
 		 * When we get here, the interface is marked down.
 		 * Free the remaining keys, if there are any
-		 * (shouldn't be, except maybe in WDS mode?)
+		 * (which can happen in AP mode if userspace sets
+		 * keys before the interface is operating, and maybe
+		 * also in WDS mode)
 		 *
 		 * Force the key freeing to always synchronize_net()
 		 * to wait for the RX path in case it is using this
-		 * interface enqueuing frames * at this very time on
+		 * interface enqueuing frames at this very time on
 		 * another CPU.
 		 */
 		ieee80211_free_keys(sdata, true);
-
-		/* fall through */
-	case NL80211_IFTYPE_AP:
 		skb_queue_purge(&sdata->skb_queue);
 	}
 
@@ -991,6 +994,9 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 
 	ieee80211_recalc_ps(local, -1);
 
+	if (cancel_scan)
+		flush_delayed_work(&local->scan_work);
+
 	if (local->open_count == 0) {
 		ieee80211_stop_device(local);
 

net/mac80211/mesh.c

@@ -874,7 +874,7 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata,
 
 	memset(&params, 0, sizeof(params));
 	memset(&csa_ie, 0, sizeof(csa_ie));
-	err = ieee80211_parse_ch_switch_ie(sdata, elems, beacon, band,
+	err = ieee80211_parse_ch_switch_ie(sdata, elems, band,
 					   sta_flags, sdata->vif.addr,
 					   &csa_ie);
 	if (err < 0)

net/mac80211/mlme.c

@@ -1072,7 +1072,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 
 	current_band = cbss->channel->band;
 	memset(&csa_ie, 0, sizeof(csa_ie));
-	res = ieee80211_parse_ch_switch_ie(sdata, elems, beacon, current_band,
+	res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
 					   ifmgd->flags,
 					   ifmgd->associated->bssid, &csa_ie);
 	if (res	< 0)
@@ -1168,7 +1168,8 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 		ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
 	else
 		mod_timer(&ifmgd->chswitch_timer,
-			  TU_TO_EXP_TIME(csa_ie.count * cbss->beacon_interval));
+			  TU_TO_EXP_TIME((csa_ie.count - 1) *
+					 cbss->beacon_interval));
 }
 
 static bool

net/mac80211/rx.c

@@ -1678,11 +1678,14 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
 	sc = le16_to_cpu(hdr->seq_ctrl);
 	frag = sc & IEEE80211_SCTL_FRAG;
 
-	if (likely((!ieee80211_has_morefrags(fc) && frag == 0) ||
-		   is_multicast_ether_addr(hdr->addr1))) {
-		/* not fragmented */
+	if (likely(!ieee80211_has_morefrags(fc) && frag == 0))
+		goto out;
+
+	if (is_multicast_ether_addr(hdr->addr1)) {
+		rx->local->dot11MulticastReceivedFrameCount++;
 		goto out;
 	}
+
 	I802_DEBUG_INC(rx->local->rx_handlers_fragments);
 
 	if (skb_linearize(rx->skb))
@@ -1775,9 +1778,6 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
  out:
 	if (rx->sta)
 		rx->sta->rx_packets++;
-	if (is_multicast_ether_addr(hdr->addr1))
-		rx->local->dot11MulticastReceivedFrameCount++;
-	else
 	ieee80211_led_rx(rx->local);
 	return RX_CONTINUE;
 }

net/mac80211/spectmgmt.c

@@ -22,7 +22,7 @@
 #include "wme.h"
 
 int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
-				 struct ieee802_11_elems *elems, bool beacon,
+				 struct ieee802_11_elems *elems,
 				 enum ieee80211_band current_band,
 				 u32 sta_flags, u8 *bssid,
 				 struct ieee80211_csa_ie *csa_ie)
@@ -91,18 +91,12 @@ int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
 		return -EINVAL;
 	}
 
-	if (!beacon && sec_chan_offs) {
+	if (sec_chan_offs) {
 		secondary_channel_offset = sec_chan_offs->sec_chan_offs;
-	} else if (beacon && ht_oper) {
-		secondary_channel_offset =
-			ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
 	} else if (!(sta_flags & IEEE80211_STA_DISABLE_HT)) {
-		/* If it's not a beacon, HT is enabled and the IE not present,
-		 * it's 20 MHz, 802.11-2012 8.5.2.6:
-		 *	This element [the Secondary Channel Offset Element] is
-		 *	present when switching to a 40 MHz channel. It may be
-		 *	present when switching to a 20 MHz channel (in which
-		 *	case the secondary channel offset is set to SCN).
+		/* If the secondary channel offset IE is not present,
+		 * we can't know what's the post-CSA offset, so the
+		 * best we can do is use 20MHz.
 		*/
 		secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
 	}