Commit 1f6d6e8e authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'v28-range-hrtimers-for-linus-v2' of...

Merge branch 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
  hrtimers: add missing docbook comments to struct hrtimer
  hrtimers: simplify hrtimer_peek_ahead_timers()
  hrtimers: fix docbook comments
  DECLARE_PER_CPU needs linux/percpu.h
  hrtimers: fix typo
  rangetimers: fix the bug reported by Ingo for real
  rangetimer: fix BUG_ON reported by Ingo
  rangetimer: fix x86 build failure for the !HRTIMERS case
  select: fix alpha OSF wrapper
  select: fix alpha OSF wrapper
  hrtimer: peek at the timer queue just before going idle
  hrtimer: make the futex() system call use the per process slack value
  hrtimer: make the nanosleep() syscall use the per process slack
  hrtimer: fix signed/unsigned bug in slack estimator
  hrtimer: show the timer ranges in /proc/timer_list
  hrtimer: incorporate feedback from Peter Zijlstra
  hrtimer: add a hrtimer_start_range() function
  hrtimer: another build fix
  hrtimer: fix build bug found by Ingo
  hrtimer: make select() and poll() use the hrtimer range feature
  ...
parents db563fc2 268a3dcf
......@@ -983,10 +983,12 @@ asmlinkage int
osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp,
struct timeval32 __user *tvp)
{
s64 timeout = MAX_SCHEDULE_TIMEOUT;
struct timespec end_time, *to = NULL;
if (tvp) {
time_t sec, usec;
to = &end_time;
if (!access_ok(VERIFY_READ, tvp, sizeof(*tvp))
|| __get_user(sec, &tvp->tv_sec)
|| __get_user(usec, &tvp->tv_usec)) {
......@@ -996,14 +998,13 @@ osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp,
if (sec < 0 || usec < 0)
return -EINVAL;
if ((unsigned long) sec < MAX_SELECT_SECONDS) {
timeout = (usec + 1000000/HZ - 1) / (1000000/HZ);
timeout += sec * (unsigned long) HZ;
}
if (poll_select_set_timeout(to, sec, usec * NSEC_PER_USEC))
return -EINVAL;
}
/* OSF does not copy back the remaining time. */
return core_sys_select(n, inp, outp, exp, &timeout);
return core_sys_select(n, inp, outp, exp, to);
}
struct rusage32 {
......
......@@ -1114,7 +1114,7 @@ static void kvm_migrate_hlt_timer(struct kvm_vcpu *vcpu)
struct hrtimer *p_ht = &vcpu->arch.hlt_timer;
if (hrtimer_cancel(p_ht))
hrtimer_start(p_ht, p_ht->expires, HRTIMER_MODE_ABS);
hrtimer_start_expires(p_ht, HRTIMER_MODE_ABS);
}
static enum hrtimer_restart hlt_timer_fn(struct hrtimer *data)
......
......@@ -195,7 +195,7 @@ int start_spu_profiling(unsigned int cycles_reset)
pr_debug("timer resolution: %lu\n", TICK_NSEC);
kt = ktime_set(0, profiling_interval);
hrtimer_init(&timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
timer.expires = kt;
hrtimer_set_expires(&timer, kt);
timer.function = profile_spus;
/* Allocate arrays for collecting SPU PC samples */
......
......@@ -204,10 +204,10 @@ static int __pit_timer_fn(struct kvm_kpit_state *ps)
if (vcpu0 && waitqueue_active(&vcpu0->wq))
wake_up_interruptible(&vcpu0->wq);
pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period);
pt->scheduled = ktime_to_ns(pt->timer.expires);
hrtimer_add_expires_ns(&pt->timer, pt->period);
pt->scheduled = hrtimer_get_expires_ns(&pt->timer);
if (pt->period)
ps->channels[0].count_load_time = pt->timer.expires;
ps->channels[0].count_load_time = hrtimer_get_expires(&pt->timer);
return (pt->period == 0 ? 0 : 1);
}
......@@ -257,7 +257,7 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
timer = &pit->pit_state.pit_timer.timer;
if (hrtimer_cancel(timer))
hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
}
static void destroy_pit_timer(struct kvm_kpit_timer *pt)
......
......@@ -946,9 +946,7 @@ static int __apic_timer_fn(struct kvm_lapic *apic)
if (apic_lvtt_period(apic)) {
result = 1;
apic->timer.dev.expires = ktime_add_ns(
apic->timer.dev.expires,
apic->timer.period);
hrtimer_add_expires_ns(&apic->timer.dev, apic->timer.period);
}
return result;
}
......@@ -1117,7 +1115,7 @@ void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu)
timer = &apic->timer.dev;
if (hrtimer_cancel(timer))
hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
}
void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu)
......
......@@ -16,6 +16,7 @@
#include <linux/cpu.h>
#include <linux/cpuidle.h>
#include <linux/ktime.h>
#include <linux/hrtimer.h>
#include "cpuidle.h"
......@@ -64,6 +65,12 @@ static void cpuidle_idle_call(void)
return;
}
/*
* run any timers that can be run now, at this point
* before calculating the idle duration etc.
*/
hrtimer_peek_ahead_timers();
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(dev);
if (need_resched())
......
......@@ -659,9 +659,9 @@ static ssize_t poll_timeout_store(struct bus_type *bus, const char *buf,
hr_time = ktime_set(0, poll_timeout);
if (!hrtimer_is_queued(&ap_poll_timer) ||
!hrtimer_forward(&ap_poll_timer, ap_poll_timer.expires, hr_time)) {
ap_poll_timer.expires = hr_time;
hrtimer_start(&ap_poll_timer, hr_time, HRTIMER_MODE_ABS);
!hrtimer_forward(&ap_poll_timer, hrtimer_get_expires(&ap_poll_timer), hr_time)) {
hrtimer_set_expires(&ap_poll_timer, hr_time);
hrtimer_start_expires(&ap_poll_timer, HRTIMER_MODE_ABS);
}
return count;
}
......
......@@ -1469,6 +1469,57 @@ int compat_do_execve(char * filename,
#define __COMPAT_NFDBITS (8 * sizeof(compat_ulong_t))
static int poll_select_copy_remaining(struct timespec *end_time, void __user *p,
int timeval, int ret)
{
struct timespec ts;
if (!p)
return ret;
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
/* No update for zero timeout */
if (!end_time->tv_sec && !end_time->tv_nsec)
return ret;
ktime_get_ts(&ts);
ts = timespec_sub(*end_time, ts);
if (ts.tv_sec < 0)
ts.tv_sec = ts.tv_nsec = 0;
if (timeval) {
struct compat_timeval rtv;
rtv.tv_sec = ts.tv_sec;
rtv.tv_usec = ts.tv_nsec / NSEC_PER_USEC;
if (!copy_to_user(p, &rtv, sizeof(rtv)))
return ret;
} else {
struct compat_timespec rts;
rts.tv_sec = ts.tv_sec;
rts.tv_nsec = ts.tv_nsec;
if (!copy_to_user(p, &rts, sizeof(rts)))
return ret;
}
/*
* If an application puts its timeval in read-only memory, we
* don't want the Linux-specific update to the timeval to
* cause a fault after the select has completed
* successfully. However, because we're not updating the
* timeval, we can't restart the system call.
*/
sticky:
if (ret == -ERESTARTNOHAND)
ret = -EINTR;
return ret;
}
/*
* Ooo, nasty. We need here to frob 32-bit unsigned longs to
* 64-bit unsigned longs.
......@@ -1550,7 +1601,8 @@ int compat_set_fd_set(unsigned long nr, compat_ulong_t __user *ufdset,
((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
int compat_core_sys_select(int n, compat_ulong_t __user *inp,
compat_ulong_t __user *outp, compat_ulong_t __user *exp, s64 *timeout)
compat_ulong_t __user *outp, compat_ulong_t __user *exp,
struct timespec *end_time)
{
fd_set_bits fds;
void *bits;
......@@ -1597,7 +1649,7 @@ int compat_core_sys_select(int n, compat_ulong_t __user *inp,
zero_fd_set(n, fds.res_out);
zero_fd_set(n, fds.res_ex);
ret = do_select(n, &fds, timeout);
ret = do_select(n, &fds, end_time);
if (ret < 0)
goto out;
......@@ -1623,7 +1675,7 @@ asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp,
compat_ulong_t __user *outp, compat_ulong_t __user *exp,
struct compat_timeval __user *tvp)
{
s64 timeout = -1;
struct timespec end_time, *to = NULL;
struct compat_timeval tv;
int ret;
......@@ -1631,43 +1683,14 @@ asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp,
if (copy_from_user(&tv, tvp, sizeof(tv)))
return -EFAULT;
if (tv.tv_sec < 0 || tv.tv_usec < 0)
to = &end_time;
if (poll_select_set_timeout(to, tv.tv_sec,
tv.tv_usec * NSEC_PER_USEC))
return -EINVAL;
/* Cast to u64 to make GCC stop complaining */
if ((u64)tv.tv_sec >= (u64)MAX_INT64_SECONDS)
timeout = -1; /* infinite */
else {
timeout = DIV_ROUND_UP(tv.tv_usec, 1000000/HZ);
timeout += tv.tv_sec * HZ;
}
}
ret = compat_core_sys_select(n, inp, outp, exp, &timeout);
if (tvp) {
struct compat_timeval rtv;
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
rtv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
rtv.tv_sec = timeout;
if (compat_timeval_compare(&rtv, &tv) >= 0)
rtv = tv;
if (copy_to_user(tvp, &rtv, sizeof(rtv))) {
sticky:
/*
* If an application puts its timeval in read-only
* memory, we don't want the Linux-specific update to
* the timeval to cause a fault after the select has
* completed successfully. However, because we're not
* updating the timeval, we can't restart the system
* call.
*/
if (ret == -ERESTARTNOHAND)
ret = -EINTR;
}
}
ret = compat_core_sys_select(n, inp, outp, exp, to);
ret = poll_select_copy_remaining(&end_time, tvp, 1, ret);
return ret;
}
......@@ -1680,15 +1703,16 @@ asmlinkage long compat_sys_pselect7(int n, compat_ulong_t __user *inp,
{
compat_sigset_t ss32;
sigset_t ksigmask, sigsaved;
s64 timeout = MAX_SCHEDULE_TIMEOUT;
struct compat_timespec ts;
struct timespec end_time, *to = NULL;
int ret;
if (tsp) {
if (copy_from_user(&ts, tsp, sizeof(ts)))
return -EFAULT;
if (ts.tv_sec < 0 || ts.tv_nsec < 0)
to = &end_time;
if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
return -EINVAL;
}
......@@ -1703,51 +1727,8 @@ asmlinkage long compat_sys_pselect7(int n, compat_ulong_t __user *inp,
sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
}
do {
if (tsp) {
if ((unsigned long)ts.tv_sec < MAX_SELECT_SECONDS) {
timeout = DIV_ROUND_UP(ts.tv_nsec, 1000000000/HZ);
timeout += ts.tv_sec * (unsigned long)HZ;
ts.tv_sec = 0;
ts.tv_nsec = 0;
} else {
ts.tv_sec -= MAX_SELECT_SECONDS;
timeout = MAX_SELECT_SECONDS * HZ;
}
}
ret = compat_core_sys_select(n, inp, outp, exp, &timeout);
} while (!ret && !timeout && tsp && (ts.tv_sec || ts.tv_nsec));
if (tsp) {
struct compat_timespec rts;
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
rts.tv_sec = timeout / HZ;
rts.tv_nsec = (timeout % HZ) * (NSEC_PER_SEC/HZ);
if (rts.tv_nsec >= NSEC_PER_SEC) {
rts.tv_sec++;
rts.tv_nsec -= NSEC_PER_SEC;
}
if (compat_timespec_compare(&rts, &ts) >= 0)
rts = ts;
if (copy_to_user(tsp, &rts, sizeof(rts))) {
sticky:
/*
* If an application puts its timeval in read-only
* memory, we don't want the Linux-specific update to
* the timeval to cause a fault after the select has
* completed successfully. However, because we're not
* updating the timeval, we can't restart the system
* call.
*/
if (ret == -ERESTARTNOHAND)
ret = -EINTR;
}
}
ret = compat_core_sys_select(n, inp, outp, exp, to);
ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
if (ret == -ERESTARTNOHAND) {
/*
......@@ -1792,18 +1773,16 @@ asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds,
compat_sigset_t ss32;
sigset_t ksigmask, sigsaved;
struct compat_timespec ts;
s64 timeout = -1;
struct timespec end_time, *to = NULL;
int ret;
if (tsp) {
if (copy_from_user(&ts, tsp, sizeof(ts)))
return -EFAULT;
/* We assume that ts.tv_sec is always lower than
the number of seconds that can be expressed in
an s64. Otherwise the compiler bitches at us */
timeout = DIV_ROUND_UP(ts.tv_nsec, 1000000000/HZ);
timeout += ts.tv_sec * HZ;
to = &end_time;
if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
return -EINVAL;
}
if (sigmask) {
......@@ -1817,7 +1796,7 @@ asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds,
sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
}
ret = do_sys_poll(ufds, nfds, &timeout);
ret = do_sys_poll(ufds, nfds, to);
/* We can restart this syscall, usually */
if (ret == -EINTR) {
......@@ -1835,31 +1814,7 @@ asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds,
} else if (sigmask)
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
if (tsp && timeout >= 0) {
struct compat_timespec rts;
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
/* Yes, we know it's actually an s64, but it's also positive. */
rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
1000;
rts.tv_sec = timeout;
if (compat_timespec_compare(&rts, &ts) >= 0)
rts = ts;
if (copy_to_user(tsp, &rts, sizeof(rts))) {
sticky:
/*
* If an application puts its timeval in read-only
* memory, we don't want the Linux-specific update to
* the timeval to cause a fault after the select has
* completed successfully. However, because we're not
* updating the timeval, we can't restart the system
* call.
*/
if (ret == -ERESTARTNOHAND && timeout >= 0)
ret = -EINTR;
}
}
ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
return ret;
}
......
......@@ -24,9 +24,64 @@
#include <linux/fdtable.h>
#include <linux/fs.h>
#include <linux/rcupdate.h>
#include <linux/hrtimer.h>
#include <asm/uaccess.h>
/*
* Estimate expected accuracy in ns from a timeval.
*
* After quite a bit of churning around, we've settled on
* a simple thing of taking 0.1% of the timeout as the
* slack, with a cap of 100 msec.
* "nice" tasks get a 0.5% slack instead.
*
* Consider this comment an open invitation to come up with even
* better solutions..
*/
static long __estimate_accuracy(struct timespec *tv)
{
long slack;
int divfactor = 1000;
if (task_nice(current) > 0)
divfactor = divfactor / 5;
slack = tv->tv_nsec / divfactor;
slack += tv->tv_sec * (NSEC_PER_SEC/divfactor);
if (slack > 100 * NSEC_PER_MSEC)
slack = 100 * NSEC_PER_MSEC;
if (slack < 0)
slack = 0;
return slack;
}
static long estimate_accuracy(struct timespec *tv)
{
unsigned long ret;
struct timespec now;
/*
* Realtime tasks get a slack of 0 for obvious reasons.
*/
if (rt_task(current))
return 0;
ktime_get_ts(&now);
now = timespec_sub(*tv, now);
ret = __estimate_accuracy(&now);
if (ret < current->timer_slack_ns)
return current->timer_slack_ns;
return ret;
}
struct poll_table_page {
struct poll_table_page * next;
struct poll_table_entry * entry;
......@@ -130,6 +185,79 @@ static void __pollwait(struct file *filp, wait_queue_head_t *wait_address,
add_wait_queue(wait_address, &entry->wait);
}
/**
* poll_select_set_timeout - helper function to setup the timeout value
* @to: pointer to timespec variable for the final timeout
* @sec: seconds (from user space)
* @nsec: nanoseconds (from user space)
*
* Note, we do not use a timespec for the user space value here, That
* way we can use the function for timeval and compat interfaces as well.
*
* Returns -EINVAL if sec/nsec are not normalized. Otherwise 0.
*/
int poll_select_set_timeout(struct timespec *to, long sec, long nsec)
{
struct timespec ts = {.tv_sec = sec, .tv_nsec = nsec};
if (!timespec_valid(&ts))
return -EINVAL;
/* Optimize for the zero timeout value here */
if (!sec && !nsec) {
to->tv_sec = to->tv_nsec = 0;
} else {
ktime_get_ts(to);
*to = timespec_add_safe(*to, ts);
}
return 0;
}
static int poll_select_copy_remaining(struct timespec *end_time, void __user *p,
int timeval, int ret)
{
struct timespec rts;
struct timeval rtv;
if (!p)
return ret;
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
/* No update for zero timeout */
if (!end_time->tv_sec && !end_time->tv_nsec)
return ret;
ktime_get_ts(&rts);
rts = timespec_sub(*end_time, rts);
if (rts.tv_sec < 0)
rts.tv_sec = rts.tv_nsec = 0;
if (timeval) {
rtv.tv_sec = rts.tv_sec;
rtv.tv_usec = rts.tv_nsec / NSEC_PER_USEC;
if (!copy_to_user(p, &rtv, sizeof(rtv)))
return ret;
} else if (!copy_to_user(p, &rts, sizeof(rts)))
return ret;
/*
* If an application puts its timeval in read-only memory, we
* don't want the Linux-specific update to the timeval to
* cause a fault after the select has completed
* successfully. However, because we're not updating the
* timeval, we can't restart the system call.
*/
sticky:
if (ret == -ERESTARTNOHAND)
ret = -EINTR;
return ret;
}
#define FDS_IN(fds, n) (fds->in + n)
#define FDS_OUT(fds, n) (fds->out + n)
#define FDS_EX(fds, n) (fds->ex + n)
......@@ -182,11 +310,13 @@ static int max_select_fd(unsigned long n, fd_set_bits *fds)
#define POLLOUT_SET (POLLWRBAND | POLLWRNORM | POLLOUT | POLLERR)
#define POLLEX_SET (POLLPRI)
int do_select(int n, fd_set_bits *fds, s64 *timeout)
int do_select(int n, fd_set_bits *fds, struct timespec *end_time)
{
ktime_t expire, *to = NULL;
struct poll_wqueues table;
poll_table *wait;
int retval, i;
int retval, i, timed_out = 0;
unsigned long slack = 0;
rcu_read_lock();
retval = max_select_fd(n, fds);
......@@ -198,12 +328,17 @@ int do_select(int n, fd_set_bits *fds, s64 *timeout)
poll_initwait(&table);
wait = &table.pt;
if (!*timeout)
if (end_time && !end_time->tv_sec && !end_time->tv_nsec) {
wait = NULL;
timed_out = 1;
}
if (end_time && !timed_out)
slack = estimate_accuracy(end_time);
retval = 0;
for (;;) {
unsigned long *rinp, *routp, *rexp, *inp, *outp, *exp;
long __timeout;
set_current_state(TASK_INTERRUPTIBLE);
......@@ -259,27 +394,25 @@ int do_select(int n, fd_set_bits *fds, s64 *timeout)
cond_resched();
}
wait = NULL;
if (retval || !*timeout || signal_pending(current))
if (retval || timed_out || signal_pending(current))
break;
if (table.error) {
retval = table.error;
break;
}
if (*timeout < 0) {
/* Wait indefinitely */
__timeout = MAX_SCHEDULE_TIMEOUT;
} else if (unlikely(*timeout >= (s64)MAX_SCHEDULE_TIMEOUT - 1)) {
/* Wait for longer than MAX_SCHEDULE_TIMEOUT. Do it in a loop */
__timeout = MAX_SCHEDULE_TIMEOUT - 1;
*timeout -= __timeout;
} else {
__timeout = *timeout;
*timeout = 0;
/*
* If this is the first loop and we have a timeout
* given, then we convert to ktime_t and set the to
* pointer to the expiry value.
*/
if (end_time && !to) {
expire = timespec_to_ktime(*end_time);
to = &expire;
}
__timeout = schedule_timeout(__timeout);
if (*timeout >= 0)
*timeout += __timeout;
if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS))
timed_out = 1;
}
__set_current_state(TASK_RUNNING);
......@@ -300,7 +433,7 @@ int do_select(int n, fd_set_bits *fds, s64 *timeout)
((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
fd_set __user *exp, s64 *timeout)
fd_set __user *exp, struct timespec *end_time)
{
fd_set_bits fds;
void *bits;
......@@ -351,7 +484,7 @@ int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
zero_fd_set(n, fds.res_out);
zero_fd_set(n, fds.res_ex);
ret = do_select(n, &fds, timeout);
ret = do_select(n, &fds, end_time);
if (ret < 0)
goto out;
......@@ -377,7 +510,7 @@ int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
fd_set __user *exp, struct timeval __user *tvp)
{
s64 timeout = -1;
struct timespec end_time, *to = NULL;
struct timeval tv;
int ret;
......@@ -385,43 +518,14 @@ asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
if (copy_from_user(&tv, tvp, sizeof(tv)))
return -EFAULT;
if (tv.tv_sec < 0 || tv.tv_usec < 0)
to = &end_time;
if (poll_select_set_timeout(to, tv.tv_sec,
tv.tv_usec * NSEC_PER_USEC))
return -EINVAL;
/* Cast to u64 to make GCC stop complaining */
if ((u64)tv.tv_sec >= (u64)MAX_INT64_SECONDS)
timeout = -1; /* infinite */
else {
timeout = DIV_ROUND_UP(tv.tv_usec, USEC_PER_SEC/HZ);
timeout += tv.tv_sec * HZ;
}
}
ret = core_sys_select(n, inp, outp, exp, &timeout);
if (tvp) {
struct timeval rtv;
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
rtv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
rtv.tv_sec = timeout;
if (timeval_compare(&rtv, &tv) >= 0)
rtv = tv;
if (copy_to_user(tvp, &rtv, sizeof(rtv))) {
sticky:
/*
* If an application puts its timeval in read-only
* memory, we don't want the Linux-specific update to
* the timeval to cause a fault after the select has
* completed successfully. However, because we're not
* updating the timeval, we can't restart the system
* call.
*/
if (ret == -ERESTARTNOHAND)
ret = -EINTR;
}
}
ret = core_sys_select(n, inp, outp, exp, to);
ret = poll_select_copy_remaining(&end_time, tvp, 1, ret);
return ret;
}
......@@ -431,25 +535,17 @@ asmlinkage long sys_pselect7(int n, fd_set __user *inp, fd_set __user *outp,
fd_set __user *exp, struct timespec __user *tsp,
const sigset_t __user *sigmask, size_t sigsetsize)
{
s64 timeout = MAX_SCHEDULE_TIMEOUT;
sigset_t ksigmask, sigsaved;
struct timespec ts;
struct timespec ts, end_time, *to = NULL;
int ret;
if (tsp) {
if (copy_from_user(&ts, tsp, sizeof(ts)))
return -EFAULT;
if (ts.tv_sec < 0 || ts.tv_nsec < 0)
to = &end_time;
if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
return -EINVAL;
/* Cast to u64 to make GCC stop complaining */
if ((u64)ts.tv_sec >= (u64)MAX_INT64_SECONDS)
timeout = -1; /* infinite */
else {
timeout = DIV_ROUND_UP(ts.tv_nsec, NSEC_PER_SEC/HZ);
timeout += ts.tv_sec * HZ;
}
}
if (sigmask) {
......@@ -463,32 +559,8 @@ asmlinkage long sys_pselect7(int n, fd_set __user *inp, fd_set __user *outp,
sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
}
ret = core_sys_select(n, inp, outp, exp, &timeout);
if (tsp) {
struct timespec rts;
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
1000;
rts.tv_sec = timeout;
if (timespec_compare(&rts, &ts) >= 0)
rts = ts;
if (copy_to_user(tsp, &rts, sizeof(rts))) {
sticky:
/*
* If an application puts its timeval in read-only
* memory, we don't want the Linux-specific update to
* the timeval to cause a fault after the select has
* completed successfully. However, because we're not
* updating the timeval, we can't restart the system
* call.
*/
if (ret == -ERESTARTNOHAND)
ret = -EINTR;
}
}
ret = core_sys_select(n, inp, outp, exp, &end_time);
ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
if (ret == -ERESTARTNOHAND) {
/*
......@@ -574,18 +646,24 @@ static inline unsigned int do_pollfd(struct pollfd *pollfd, poll_table *pwait)
}
static int do_poll(unsigned int nfds, struct poll_list *list,
struct poll_wqueues *wait, s64 *timeout)
struct poll_wqueues *wait, struct timespec *end_time)
{
int count = 0;
poll_table* pt = &wait->pt;
ktime_t expire, *to = NULL;
int timed_out = 0, count = 0;
unsigned long slack = 0;
/* Optimise the no-wait case */
if (!(*timeout))
if (end_time && !end_time->tv_sec && !end_time->tv_nsec) {
pt = NULL;
timed_out = 1;
}
if (end_time && !timed_out)
slack = estimate_accuracy(end_time);
for (;;) {
struct poll_list *walk;
long __timeout;
set_current_state(TASK_INTERRUPTIBLE);
for (walk = list; walk != NULL; walk = walk->next) {
......@@ -617,27 +695,21 @@ static int do_poll(unsigned int nfds, struct poll_list *list,
if (signal_pending(current))
count = -EINTR;
}
if (count || !*timeout)
if (count || timed_out)
break;
if (*timeout < 0) {
/* Wait indefinitely */
__timeout = MAX_SCHEDULE_TIMEOUT;
} else if (unlikely(*timeout >= (s64)MAX_SCHEDULE_TIMEOUT-1)) {
/*
* Wait for longer than MAX_SCHEDULE_TIMEOUT. Do it in
* a loop
* If this is the first loop and we have a timeout
* given, then we convert to ktime_t and set the to
* pointer to the expiry value.
*/
__timeout = MAX_SCHEDULE_TIMEOUT - 1;
*timeout -= __timeout;
} else {
__timeout = *timeout;
*timeout = 0;
if (end_time && !to) {
expire = timespec_to_ktime(*end_time);
to = &expire;
}
__timeout = schedule_timeout(__timeout);
if (*timeout >= 0)
*timeout += __timeout;
if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS))
timed_out = 1;
}
__set_current_state(TASK_RUNNING);
return count;
......@@ -646,7 +718,8 @@ static int do_poll(unsigned int nfds, struct poll_list *list,
#define N_STACK_PPS ((sizeof(stack_pps) - sizeof(struct poll_list)) / \
sizeof(struct pollfd))
int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds, s64 *timeout)
int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds,
struct timespec *end_time)
{
struct poll_wqueues table;
int err = -EFAULT, fdcount, len, size;
......@@ -686,7 +759,7 @@ int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds, s64 *timeout)
}
poll_initwait(&table);
fdcount = do_poll(nfds, head, &table, timeout);
fdcount = do_poll(nfds, head, &table, end_time);
poll_freewait(&table);
for (walk = head; walk; walk = walk->next) {
......@@ -712,16 +785,21 @@ int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds, s64 *timeout)
static long do_restart_poll(struct restart_block *restart_block)
{
struct pollfd __user *ufds = (struct pollfd __user*)restart_block->arg0;
int nfds = restart_block->arg1;
s64 timeout = ((s64)restart_block->arg3<<32) | (s64)restart_block->arg2;
struct pollfd __user *ufds = restart_block->poll.ufds;
int nfds = restart_block->poll.nfds;
struct timespec *to = NULL, end_time;
int ret;
ret = do_sys_poll(ufds, nfds, &timeout);
if (restart_block->poll.has_timeout) {
end_time.tv_sec = restart_block->poll.tv_sec;
end_time.tv_nsec = restart_block->poll.tv_nsec;
to = &end_time;
}
ret = do_sys_poll(ufds, nfds, to);
if (ret == -EINTR) {
restart_block->fn = do_restart_poll;
restart_block->arg2 = timeout & 0xFFFFFFFF;
restart_block->arg3 = (u64)timeout >> 32;
ret = -ERESTART_RESTARTBLOCK;
}
return ret;
......@@ -730,31 +808,32 @@ static long do_restart_poll(struct restart_block *restart_block)
asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
long timeout_msecs)
{
s64 timeout_jiffies;
struct timespec end_time, *to = NULL;
int ret;
if (timeout_msecs > 0) {
#if HZ > 1000
/* We can only overflow if HZ > 1000 */
if (timeout_msecs / 1000 > (s64)0x7fffffffffffffffULL / (s64)HZ)
timeout_jiffies = -1;
else
#endif
timeout_jiffies = msecs_to_jiffies(timeout_msecs) + 1;
} else {
/* Infinite (< 0) or no (0) timeout */
timeout_jiffies = timeout_msecs;
if (timeout_msecs >= 0) {
to = &end_time;
poll_select_set_timeout(to, timeout_msecs / MSEC_PER_SEC,
NSEC_PER_MSEC * (timeout_msecs % MSEC_PER_SEC));
}
ret = do_sys_poll(ufds, nfds, &timeout_jiffies);
ret = do_sys_poll(ufds, nfds, to);
if (ret == -EINTR) {
struct restart_block *restart_block;
restart_block = &current_thread_info()->restart_block;
restart_block->fn = do_restart_poll;
restart_block->arg0 = (unsigned long)ufds;
restart_block->arg1 = nfds;
restart_block->arg2 = timeout_jiffies & 0xFFFFFFFF;
restart_block->arg3 = (u64)timeout_jiffies >> 32;
restart_block->poll.ufds = ufds;
restart_block->poll.nfds = nfds;
if (timeout_msecs >= 0) {
restart_block->poll.tv_sec = end_time.tv_sec;
restart_block->poll.tv_nsec = end_time.tv_nsec;
restart_block->poll.has_timeout = 1;
} else
restart_block->poll.has_timeout = 0;
ret = -ERESTART_RESTARTBLOCK;
}
return ret;
......@@ -766,21 +845,16 @@ asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
size_t sigsetsize)
{
sigset_t ksigmask, sigsaved;
struct timespec ts;
s64 timeout = -1;
struct timespec ts, end_time, *to = NULL;
int ret;
if (tsp) {
if (copy_from_user(&ts, tsp, sizeof(ts)))
return -EFAULT;
/* Cast to u64 to make GCC stop complaining */
if ((u64)ts.tv_sec >= (u64)MAX_INT64_SECONDS)
timeout = -1; /* infinite */
else {
timeout = DIV_ROUND_UP(ts.tv_nsec, NSEC_PER_SEC/HZ);
timeout += ts.tv_sec * HZ;
}
to = &end_time;
if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
return -EINVAL;
}
if (sigmask) {
......@@ -794,7 +868,7 @@ asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
}
ret = do_sys_poll(ufds, nfds, &timeout);
ret = do_sys_poll(ufds, nfds, to);
/* We can restart this syscall, usually */
if (ret == -EINTR) {
......@@ -812,31 +886,7 @@ asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
} else if (sigmask)
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
if (tsp && timeout >= 0) {
struct timespec rts;
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
/* Yes, we know it's actually an s64, but it's also positive. */
rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
1000;
rts.tv_sec = timeout;
if (timespec_compare(&rts, &ts) >= 0)
rts = ts;
if (copy_to_user(tsp, &rts, sizeof(rts))) {
sticky:
/*
* If an application puts its timeval in read-only
* memory, we don't want the Linux-specific update to
* the timeval to cause a fault after the select has
* completed successfully. However, because we're not
* updating the timeval, we can't restart the system
* call.
*/
if (ret == -ERESTARTNOHAND && timeout >= 0)
ret = -EINTR;
}
}
ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
return ret;
}
......
......@@ -52,11 +52,9 @@ static enum hrtimer_restart timerfd_tmrproc(struct hrtimer *htmr)
static ktime_t timerfd_get_remaining(struct timerfd_ctx *ctx)
{
ktime_t now, remaining;
now = ctx->tmr.base->get_time();
remaining = ktime_sub(ctx->tmr.expires, now);
ktime_t remaining;
remaining = hrtimer_expires_remaining(&ctx->tmr);
return remaining.tv64 < 0 ? ktime_set(0, 0): remaining;
}
......@@ -74,7 +72,7 @@ static void timerfd_setup(struct timerfd_ctx *ctx, int flags,
ctx->ticks = 0;
ctx->tintv = timespec_to_ktime(ktmr->it_interval);
hrtimer_init(&ctx->tmr, ctx->clockid, htmode);
ctx->tmr.expires = texp;
hrtimer_set_expires(&ctx->tmr, texp);
ctx->tmr.function = timerfd_tmrproc;
if (texp.tv64 != 0)
hrtimer_start(&ctx->tmr, texp, htmode);
......
......@@ -20,6 +20,8 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/wait.h>
#include <linux/percpu.h>
struct hrtimer_clock_base;
struct hrtimer_cpu_base;
......@@ -101,9 +103,14 @@ enum hrtimer_cb_mode {
/**
* struct hrtimer - the basic hrtimer structure
* @node: red black tree node for time ordered insertion
* @expires: the absolute expiry time in the hrtimers internal
* @_expires: the absolute expiry time in the hrtimers internal
* representation. The time is related to the clock on
* which the timer is based.
* which the timer is based. Is setup by adding
* slack to the _softexpires value. For non range timers
* identical to _softexpires.
* @_softexpires: the absolute earliest expiry time of the hrtimer.
* The time which was given as expiry time when the timer
* was armed.
* @function: timer expiry callback function
* @base: pointer to the timer base (per cpu and per clock)
* @state: state information (See bit values above)
......@@ -121,7 +128,8 @@ enum hrtimer_cb_mode {
*/
struct hrtimer {
struct rb_node node;
ktime_t expires;
ktime_t _expires;
ktime_t _softexpires;
enum hrtimer_restart (*function)(struct hrtimer *);
struct hrtimer_clock_base *base;
unsigned long state;
......@@ -201,6 +209,71 @@ struct hrtimer_cpu_base {
#endif
};
static inline void hrtimer_set_expires(struct hrtimer *timer, ktime_t time)
{
timer->_expires = time;
timer->_softexpires = time;
}
static inline void hrtimer_set_expires_range(struct hrtimer *timer, ktime_t time, ktime_t delta)
{
timer->_softexpires = time;
timer->_expires = ktime_add_safe(time, delta);
}
static inline void hrtimer_set_expires_range_ns(struct hrtimer *timer, ktime_t time, unsigned long delta)
{
timer->_softexpires = time;
timer->_expires = ktime_add_safe(time, ns_to_ktime(delta));
}
static inline void hrtimer_set_expires_tv64(struct hrtimer *timer, s64 tv64)
{
timer->_expires.tv64 = tv64;
timer->_softexpires.tv64 = tv64;
}
static inline void hrtimer_add_expires(struct hrtimer *timer, ktime_t time)
{
timer->_expires = ktime_add_safe(timer->_expires, time);
timer->_softexpires = ktime_add_safe(timer->_softexpires, time);
}
static inline void hrtimer_add_expires_ns(struct hrtimer *timer, unsigned long ns)
{
timer->_expires = ktime_add_ns(timer->_expires, ns);
timer->_softexpires = ktime_add_ns(timer->_softexpires, ns);
}
static inline ktime_t hrtimer_get_expires(const struct hrtimer *timer)
{
return timer->_expires;
}
static inline ktime_t hrtimer_get_softexpires(const struct hrtimer *timer)
{
return timer->_softexpires;
}
static inline s64 hrtimer_get_expires_tv64(const struct hrtimer *timer)
{
return timer->_expires.tv64;
}
static inline s64 hrtimer_get_softexpires_tv64(const struct hrtimer *timer)
{
return timer->_softexpires.tv64;
}
static inline s64 hrtimer_get_expires_ns(const struct hrtimer *timer)
{
return ktime_to_ns(timer->_expires);
}
static inline ktime_t hrtimer_expires_remaining(const struct hrtimer *timer)
{
return ktime_sub(timer->_expires, timer->base->get_time());
}
#ifdef CONFIG_HIGH_RES_TIMERS
struct clock_event_device;
......@@ -221,6 +294,8 @@ static inline int hrtimer_is_hres_active(struct hrtimer *timer)
return timer->base->cpu_base->hres_active;
}
extern void hrtimer_peek_ahead_timers(void);
/*
* The resolution of the clocks. The resolution value is returned in
* the clock_getres() system call to give application programmers an
......@@ -243,6 +318,7 @@ static inline int hrtimer_is_hres_active(struct hrtimer *timer)
* is expired in the next softirq when the clock was advanced.
*/
static inline void clock_was_set(void) { }
static inline void hrtimer_peek_ahead_timers(void) { }
static inline void hres_timers_resume(void) { }
......@@ -264,6 +340,10 @@ static inline int hrtimer_is_hres_active(struct hrtimer *timer)
extern ktime_t ktime_get(void);
extern ktime_t ktime_get_real(void);
DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
/* Exported timer functions: */
/* Initialize timers: */
......@@ -288,12 +368,25 @@ static inline void destroy_hrtimer_on_stack(struct hrtimer *timer) { }
/* Basic timer operations: */
extern int hrtimer_start(struct hrtimer *timer, ktime_t tim,
const enum hrtimer_mode mode);
extern int hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
unsigned long range_ns, const enum hrtimer_mode mode);
extern int hrtimer_cancel(struct hrtimer *timer);
extern int hrtimer_try_to_cancel(struct hrtimer *timer);
static inline int hrtimer_start_expires(struct hrtimer *timer,
enum hrtimer_mode mode)
{
unsigned long delta;
ktime_t soft, hard;
soft = hrtimer_get_softexpires(timer);
hard = hrtimer_get_expires(timer);
delta = ktime_to_ns(ktime_sub(hard, soft));
return hrtimer_start_range_ns(timer, soft, delta, mode);
}
static inline int hrtimer_restart(struct hrtimer *timer)
{
return hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
return hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
}
/* Query timers: */
......@@ -350,6 +443,10 @@ extern long hrtimer_nanosleep_restart(struct restart_block *restart_block);
extern void hrtimer_init_sleeper(struct hrtimer_sleeper *sl,
struct task_struct *tsk);
extern int schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
const enum hrtimer_mode mode);
extern int schedule_hrtimeout(ktime_t *expires, const enum hrtimer_mode mode);
/* Soft interrupt function to run the hrtimer queues: */
extern void hrtimer_run_queues(void);
extern void hrtimer_run_pending(void);
......
......@@ -170,6 +170,7 @@ extern struct group_info init_groups;
.cpu_timers = INIT_CPU_TIMERS(tsk.cpu_timers), \
.fs_excl = ATOMIC_INIT(0), \
.pi_lock = __SPIN_LOCK_UNLOCKED(tsk.pi_lock), \
.timer_slack_ns = 50000, /* 50 usec default slack */ \
.pids = { \
[PIDTYPE_PID] = INIT_PID_LINK(PIDTYPE_PID), \
[PIDTYPE_PGID] = INIT_PID_LINK(PIDTYPE_PGID), \
......
......@@ -114,11 +114,13 @@ void zero_fd_set(unsigned long nr, unsigned long *fdset)
#define MAX_INT64_SECONDS (((s64)(~((u64)0)>>1)/HZ)-1)
extern int do_select(int n, fd_set_bits *fds, s64 *timeout);
extern int do_select(int n, fd_set_bits *fds, struct timespec *end_time);
extern int do_sys_poll(struct pollfd __user * ufds, unsigned int nfds,
s64 *timeout);
struct timespec *end_time);
extern int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
fd_set __user *exp, s64 *timeout);
fd_set __user *exp, struct timespec *end_time);
extern int poll_select_set_timeout(struct timespec *to, long sec, long nsec);
#endif /* KERNEL */
......
......@@ -78,4 +78,11 @@
#define PR_GET_SECUREBITS 27
#define PR_SET_SECUREBITS 28
/*
* Get/set the timerslack as used by poll/select/nanosleep
* A value of 0 means "use default"
*/
#define PR_SET_TIMERSLACK 29
#define PR_GET_TIMERSLACK 30
#endif /* _LINUX_PRCTL_H */
......@@ -1345,6 +1345,12 @@ struct task_struct {
int latency_record_count;
struct latency_record latency_record[LT_SAVECOUNT];
#endif
/*
* time slack values; these are used to round up poll() and
* select() etc timeout values. These are in nanoseconds.
*/
unsigned long timer_slack_ns;
unsigned long default_timer_slack_ns;
};
/*
......
......@@ -38,6 +38,14 @@ struct restart_block {
#endif
u64 expires;
} nanosleep;
/* For poll */
struct {
struct pollfd __user *ufds;
int nfds;
int has_timeout;
unsigned long tv_sec;
unsigned long tv_nsec;
} poll;
};
};
......
......@@ -40,6 +40,8 @@ extern struct timezone sys_tz;
#define NSEC_PER_SEC 1000000000L
#define FSEC_PER_SEC 1000000000000000L
#define TIME_T_MAX (time_t)((1UL << ((sizeof(time_t) << 3) - 1)) - 1)
static inline int timespec_equal(const struct timespec *a,
const struct timespec *b)
{
......@@ -74,6 +76,8 @@ extern unsigned long mktime(const unsigned int year, const unsigned int mon,
const unsigned int min, const unsigned int sec);
extern void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec);
extern struct timespec timespec_add_safe(const struct timespec lhs,
const struct timespec rhs);
/*
* sub = lhs - rhs, in normalized form
......
......@@ -1018,6 +1018,8 @@ static struct task_struct *copy_process(unsigned long clone_flags,
p->prev_utime = cputime_zero;
p->prev_stime = cputime_zero;
p->default_timer_slack_ns = current->timer_slack_ns;
#ifdef CONFIG_DETECT_SOFTLOCKUP
p->last_switch_count = 0;
p->last_switch_timestamp = 0;
......
......@@ -1296,13 +1296,16 @@ static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared,
if (!abs_time)
schedule();
else {
unsigned long slack;
slack = current->timer_slack_ns;
if (rt_task(current))
slack = 0;
hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC,
HRTIMER_MODE_ABS);
hrtimer_init_sleeper(&t, current);
t.timer.expires = *abs_time;
hrtimer_set_expires_range_ns(&t.timer, *abs_time, slack);
hrtimer_start(&t.timer, t.timer.expires,
HRTIMER_MODE_ABS);
hrtimer_start_expires(&t.timer, HRTIMER_MODE_ABS);
if (!hrtimer_active(&t.timer))
t.task = NULL;
......@@ -1404,7 +1407,7 @@ static int futex_lock_pi(u32 __user *uaddr, struct rw_semaphore *fshared,
hrtimer_init_on_stack(&to->timer, CLOCK_REALTIME,
HRTIMER_MODE_ABS);
hrtimer_init_sleeper(to, current);
to->timer.expires = *time;
hrtimer_set_expires(&to->timer, *time);
}
q.pi_state = NULL;
......
......@@ -517,7 +517,7 @@ static void hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base)
if (!base->first)
continue;
timer = rb_entry(base->first, struct hrtimer, node);
expires = ktime_sub(timer->expires, base->offset);
expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
if (expires.tv64 < cpu_base->expires_next.tv64)
cpu_base->expires_next = expires;
}
......@@ -539,10 +539,10 @@ static int hrtimer_reprogram(struct hrtimer *timer,
struct hrtimer_clock_base *base)
{
ktime_t *expires_next = &__get_cpu_var(hrtimer_bases).expires_next;
ktime_t expires = ktime_sub(timer->expires, base->offset);
ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
int res;
WARN_ON_ONCE(timer->expires.tv64 < 0);
WARN_ON_ONCE(hrtimer_get_expires_tv64(timer) < 0);
/*
* When the callback is running, we do not reprogram the clock event
......@@ -795,7 +795,7 @@ u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval)
u64 orun = 1;
ktime_t delta;
delta = ktime_sub(now, timer->expires);
delta = ktime_sub(now, hrtimer_get_expires(timer));
if (delta.tv64 < 0)
return 0;
......@@ -807,8 +807,8 @@ u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval)
s64 incr = ktime_to_ns(interval);
orun = ktime_divns(delta, incr);
timer->expires = ktime_add_ns(timer->expires, incr * orun);
if (timer->expires.tv64 > now.tv64)
hrtimer_add_expires_ns(timer, incr * orun);
if (hrtimer_get_expires_tv64(timer) > now.tv64)
return orun;
/*
* This (and the ktime_add() below) is the
......@@ -816,7 +816,7 @@ u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval)
*/
orun++;
}
timer->expires = ktime_add_safe(timer->expires, interval);
hrtimer_add_expires(timer, interval);
return orun;
}
......@@ -848,7 +848,8 @@ static void enqueue_hrtimer(struct hrtimer *timer,
* We dont care about collisions. Nodes with
* the same expiry time stay together.
*/
if (timer->expires.tv64 < entry->expires.tv64) {
if (hrtimer_get_expires_tv64(timer) <
hrtimer_get_expires_tv64(entry)) {
link = &(*link)->rb_left;
} else {
link = &(*link)->rb_right;
......@@ -945,9 +946,10 @@ remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base)
}
/**
* hrtimer_start - (re)start an relative timer on the current CPU
* hrtimer_start_range_ns - (re)start an hrtimer on the current CPU
* @timer: the timer to be added
* @tim: expiry time
* @delta_ns: "slack" range for the timer
* @mode: expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
*
* Returns:
......@@ -955,7 +957,8 @@ remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base)
* 1 when the timer was active
*/
int
hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, unsigned long delta_ns,
const enum hrtimer_mode mode)
{
struct hrtimer_clock_base *base, *new_base;
unsigned long flags;
......@@ -983,7 +986,7 @@ hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
#endif
}
timer->expires = tim;
hrtimer_set_expires_range_ns(timer, tim, delta_ns);
timer_stats_hrtimer_set_start_info(timer);
......@@ -1016,8 +1019,26 @@ hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
return ret;
}
EXPORT_SYMBOL_GPL(hrtimer_start_range_ns);
/**
* hrtimer_start - (re)start an hrtimer on the current CPU
* @timer: the timer to be added
* @tim: expiry time
* @mode: expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
*
* Returns:
* 0 on success
* 1 when the timer was active
*/
int
hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
{
return hrtimer_start_range_ns(timer, tim, 0, mode);
}
EXPORT_SYMBOL_GPL(hrtimer_start);
/**
* hrtimer_try_to_cancel - try to deactivate a timer
* @timer: hrtimer to stop
......@@ -1077,7 +1098,7 @@ ktime_t hrtimer_get_remaining(const struct hrtimer *timer)
ktime_t rem;
base = lock_hrtimer_base(timer, &flags);
rem = ktime_sub(timer->expires, base->get_time());
rem = hrtimer_expires_remaining(timer);
unlock_hrtimer_base(timer, &flags);
return rem;
......@@ -1109,7 +1130,7 @@ ktime_t hrtimer_get_next_event(void)
continue;
timer = rb_entry(base->first, struct hrtimer, node);
delta.tv64 = timer->expires.tv64;
delta.tv64 = hrtimer_get_expires_tv64(timer);
delta = ktime_sub(delta, base->get_time());
if (delta.tv64 < mindelta.tv64)
mindelta.tv64 = delta.tv64;
......@@ -1310,10 +1331,23 @@ void hrtimer_interrupt(struct clock_event_device *dev)
timer = rb_entry(node, struct hrtimer, node);
if (basenow.tv64 < timer->expires.tv64) {
/*
* The immediate goal for using the softexpires is
* minimizing wakeups, not running timers at the
* earliest interrupt after their soft expiration.
* This allows us to avoid using a Priority Search
* Tree, which can answer a stabbing querry for
* overlapping intervals and instead use the simple
* BST we already have.
* We don't add extra wakeups by delaying timers that
* are right-of a not yet expired timer, because that
* timer will have to trigger a wakeup anyway.
*/
if (basenow.tv64 < hrtimer_get_softexpires_tv64(timer)) {
ktime_t expires;
expires = ktime_sub(timer->expires,
expires = ktime_sub(hrtimer_get_expires(timer),
base->offset);
if (expires.tv64 < expires_next.tv64)
expires_next = expires;
......@@ -1349,6 +1383,30 @@ void hrtimer_interrupt(struct clock_event_device *dev)
raise_softirq(HRTIMER_SOFTIRQ);
}
/**
* hrtimer_peek_ahead_timers -- run soft-expired timers now
*
* hrtimer_peek_ahead_timers will peek at the timer queue of
* the current cpu and check if there are any timers for which
* the soft expires time has passed. If any such timers exist,
* they are run immediately and then removed from the timer queue.
*
*/
void hrtimer_peek_ahead_timers(void)
{
struct tick_device *td;
unsigned long flags;
if (!hrtimer_hres_active())
return;
local_irq_save(flags);
td = &__get_cpu_var(tick_cpu_device);
if (td && td->evtdev)
hrtimer_interrupt(td->evtdev);
local_irq_restore(flags);
}
static void run_hrtimer_softirq(struct softirq_action *h)
{
run_hrtimer_pending(&__get_cpu_var(hrtimer_bases));
......@@ -1414,7 +1472,8 @@ void hrtimer_run_queues(void)
struct hrtimer *timer;
timer = rb_entry(node, struct hrtimer, node);
if (base->softirq_time.tv64 <= timer->expires.tv64)
if (base->softirq_time.tv64 <=
hrtimer_get_expires_tv64(timer))
break;
if (timer->cb_mode == HRTIMER_CB_SOFTIRQ) {
......@@ -1462,7 +1521,7 @@ static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mod
do {
set_current_state(TASK_INTERRUPTIBLE);
hrtimer_start(&t->timer, t->timer.expires, mode);
hrtimer_start_expires(&t->timer, mode);
if (!hrtimer_active(&t->timer))
t->task = NULL;
......@@ -1484,7 +1543,7 @@ static int update_rmtp(struct hrtimer *timer, struct timespec __user *rmtp)
struct timespec rmt;
ktime_t rem;
rem = ktime_sub(timer->expires, timer->base->get_time());
rem = hrtimer_expires_remaining(timer);
if (rem.tv64 <= 0)
return 0;
rmt = ktime_to_timespec(rem);
......@@ -1503,7 +1562,7 @@ long __sched hrtimer_nanosleep_restart(struct restart_block *restart)
hrtimer_init_on_stack(&t.timer, restart->nanosleep.index,
HRTIMER_MODE_ABS);
t.timer.expires.tv64 = restart->nanosleep.expires;
hrtimer_set_expires_tv64(&t.timer, restart->nanosleep.expires);
if (do_nanosleep(&t, HRTIMER_MODE_ABS))
goto out;
......@@ -1528,9 +1587,14 @@ long hrtimer_nanosleep(struct timespec *rqtp, struct timespec __user *rmtp,
struct restart_block *restart;
struct hrtimer_sleeper t;
int ret = 0;
unsigned long slack;
slack = current->timer_slack_ns;
if (rt_task(current))
slack = 0;
hrtimer_init_on_stack(&t.timer, clockid, mode);
t.timer.expires = timespec_to_ktime(*rqtp);
hrtimer_set_expires_range_ns(&t.timer, timespec_to_ktime(*rqtp), slack);
if (do_nanosleep(&t, mode))
goto out;
......@@ -1550,7 +1614,7 @@ long hrtimer_nanosleep(struct timespec *rqtp, struct timespec __user *rmtp,
restart->fn = hrtimer_nanosleep_restart;
restart->nanosleep.index = t.timer.base->index;
restart->nanosleep.rmtp = rmtp;
restart->nanosleep.expires = t.timer.expires.tv64;
restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer);
ret = -ERESTART_RESTARTBLOCK;
out:
......@@ -1752,3 +1816,103 @@ void __init hrtimers_init(void)
#endif
}
/**
* schedule_hrtimeout_range - sleep until timeout
* @expires: timeout value (ktime_t)
* @delta: slack in expires timeout (ktime_t)
* @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
*
* Make the current task sleep until the given expiry time has
* elapsed. The routine will return immediately unless
* the current task state has been set (see set_current_state()).
*
* The @delta argument gives the kernel the freedom to schedule the
* actual wakeup to a time that is both power and performance friendly.
* The kernel give the normal best effort behavior for "@expires+@delta",
* but may decide to fire the timer earlier, but no earlier than @expires.
*
* You can set the task state as follows -
*
* %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
* pass before the routine returns.
*
* %TASK_INTERRUPTIBLE - the routine may return early if a signal is
* delivered to the current task.
*
* The current task state is guaranteed to be TASK_RUNNING when this
* routine returns.
*
* Returns 0 when the timer has expired otherwise -EINTR
*/
int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
const enum hrtimer_mode mode)
{
struct hrtimer_sleeper t;
/*
* Optimize when a zero timeout value is given. It does not
* matter whether this is an absolute or a relative time.
*/
if (expires && !expires->tv64) {
__set_current_state(TASK_RUNNING);
return 0;
}
/*
* A NULL parameter means "inifinte"
*/
if (!expires) {
schedule();
__set_current_state(TASK_RUNNING);
return -EINTR;
}
hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, mode);
hrtimer_set_expires_range_ns(&t.timer, *expires, delta);
hrtimer_init_sleeper(&t, current);
hrtimer_start_expires(&t.timer, mode);
if (!hrtimer_active(&t.timer))
t.task = NULL;
if (likely(t.task))
schedule();
hrtimer_cancel(&t.timer);
destroy_hrtimer_on_stack(&t.timer);
__set_current_state(TASK_RUNNING);
return !t.task ? 0 : -EINTR;
}
EXPORT_SYMBOL_GPL(schedule_hrtimeout_range);
/**
* schedule_hrtimeout - sleep until timeout
* @expires: timeout value (ktime_t)
* @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
*
* Make the current task sleep until the given expiry time has
* elapsed. The routine will return immediately unless
* the current task state has been set (see set_current_state()).
*
* You can set the task state as follows -
*
* %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
* pass before the routine returns.
*
* %TASK_INTERRUPTIBLE - the routine may return early if a signal is
* delivered to the current task.
*
* The current task state is guaranteed to be TASK_RUNNING when this
* routine returns.
*
* Returns 0 when the timer has expired otherwise -EINTR
*/
int __sched schedule_hrtimeout(ktime_t *expires,
const enum hrtimer_mode mode)
{
return schedule_hrtimeout_range(expires, 0, mode);
}
EXPORT_SYMBOL_GPL(schedule_hrtimeout);
......@@ -639,7 +639,7 @@ common_timer_get(struct k_itimer *timr, struct itimerspec *cur_setting)
(timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE))
timr->it_overrun += (unsigned int) hrtimer_forward(timer, now, iv);
remaining = ktime_sub(timer->expires, now);
remaining = ktime_sub(hrtimer_get_expires(timer), now);
/* Return 0 only, when the timer is expired and not pending */
if (remaining.tv64 <= 0) {
/*
......@@ -733,7 +733,7 @@ common_timer_set(struct k_itimer *timr, int flags,
hrtimer_init(&timr->it.real.timer, timr->it_clock, mode);
timr->it.real.timer.function = posix_timer_fn;
timer->expires = timespec_to_ktime(new_setting->it_value);
hrtimer_set_expires(timer, timespec_to_ktime(new_setting->it_value));
/* Convert interval */
timr->it.real.interval = timespec_to_ktime(new_setting->it_interval);
......@@ -742,14 +742,12 @@ common_timer_set(struct k_itimer *timr, int flags,
if (((timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE)) {
/* Setup correct expiry time for relative timers */
if (mode == HRTIMER_MODE_REL) {
timer->expires =
ktime_add_safe(timer->expires,
timer->base->get_time());
hrtimer_add_expires(timer, timer->base->get_time());
}
return 0;
}
hrtimer_start(timer, timer->expires, mode);
hrtimer_start_expires(timer, mode);
return 0;
}
......
......@@ -631,8 +631,7 @@ rt_mutex_slowlock(struct rt_mutex *lock, int state,
/* Setup the timer, when timeout != NULL */
if (unlikely(timeout)) {
hrtimer_start(&timeout->timer, timeout->timer.expires,
HRTIMER_MODE_ABS);
hrtimer_start_expires(&timeout->timer, HRTIMER_MODE_ABS);
if (!hrtimer_active(&timeout->timer))
timeout->task = NULL;
}
......
......@@ -227,8 +227,7 @@ static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
now = hrtimer_cb_get_time(&rt_b->rt_period_timer);
hrtimer_forward(&rt_b->rt_period_timer, now, rt_b->rt_period);
hrtimer_start(&rt_b->rt_period_timer,
rt_b->rt_period_timer.expires,
hrtimer_start_expires(&rt_b->rt_period_timer,
HRTIMER_MODE_ABS);
}
spin_unlock(&rt_b->rt_runtime_lock);
......@@ -1071,7 +1070,7 @@ static void hrtick_start(struct rq *rq, u64 delay)
struct hrtimer *timer = &rq->hrtick_timer;
ktime_t time = ktime_add_ns(timer->base->get_time(), delay);
timer->expires = time;
hrtimer_set_expires(timer, time);
if (rq == this_rq()) {
hrtimer_restart(timer);
......
......@@ -1716,6 +1716,16 @@ asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
case PR_SET_TSC:
error = SET_TSC_CTL(arg2);
break;
case PR_GET_TIMERSLACK:
error = current->timer_slack_ns;
break;
case PR_SET_TIMERSLACK:
if (arg2 <= 0)
current->timer_slack_ns =
current->default_timer_slack_ns;
else
current->timer_slack_ns = arg2;
break;
default:
error = -EINVAL;
break;
......
......@@ -669,3 +669,21 @@ EXPORT_SYMBOL(get_jiffies_64);
#endif
EXPORT_SYMBOL(jiffies);
/*
* Add two timespec values and do a safety check for overflow.
* It's assumed that both values are valid (>= 0)
*/
struct timespec timespec_add_safe(const struct timespec lhs,
const struct timespec rhs)
{
struct timespec res;
set_normalized_timespec(&res, lhs.tv_sec + rhs.tv_sec,
lhs.tv_nsec + rhs.tv_nsec);
if (res.tv_sec < lhs.tv_sec || res.tv_sec < rhs.tv_sec)
res.tv_sec = TIME_T_MAX;
return res;
}
......@@ -142,8 +142,7 @@ static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer)
time_state = TIME_OOP;
printk(KERN_NOTICE "Clock: "
"inserting leap second 23:59:60 UTC\n");
leap_timer.expires = ktime_add_ns(leap_timer.expires,
NSEC_PER_SEC);
hrtimer_add_expires_ns(&leap_timer, NSEC_PER_SEC);
res = HRTIMER_RESTART;
break;
case TIME_DEL:
......
......@@ -300,7 +300,7 @@ void tick_nohz_stop_sched_tick(int inidle)
goto out;
}
ts->idle_tick = ts->sched_timer.expires;
ts->idle_tick = hrtimer_get_expires(&ts->sched_timer);
ts->tick_stopped = 1;
ts->idle_jiffies = last_jiffies;
rcu_enter_nohz();
......@@ -380,21 +380,21 @@ ktime_t tick_nohz_get_sleep_length(void)
static void tick_nohz_restart(struct tick_sched *ts, ktime_t now)
{
hrtimer_cancel(&ts->sched_timer);
ts->sched_timer.expires = ts->idle_tick;
hrtimer_set_expires(&ts->sched_timer, ts->idle_tick);
while (1) {
/* Forward the time to expire in the future */
hrtimer_forward(&ts->sched_timer, now, tick_period);
if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
hrtimer_start(&ts->sched_timer,
ts->sched_timer.expires,
hrtimer_start_expires(&ts->sched_timer,
HRTIMER_MODE_ABS);
/* Check, if the timer was already in the past */
if (hrtimer_active(&ts->sched_timer))
break;
} else {
if (!tick_program_event(ts->sched_timer.expires, 0))
if (!tick_program_event(
hrtimer_get_expires(&ts->sched_timer), 0))
break;
}
/* Update jiffies and reread time */
......@@ -456,14 +456,16 @@ void tick_nohz_restart_sched_tick(void)
*/
ts->tick_stopped = 0;
ts->idle_exittime = now;
tick_nohz_restart(ts, now);
local_irq_enable();
}
static int tick_nohz_reprogram(struct tick_sched *ts, ktime_t now)
{
hrtimer_forward(&ts->sched_timer, now, tick_period);
return tick_program_event(ts->sched_timer.expires, 0);
return tick_program_event(hrtimer_get_expires(&ts->sched_timer), 0);
}
/*
......@@ -542,7 +544,7 @@ static void tick_nohz_switch_to_nohz(void)
next = tick_init_jiffy_update();
for (;;) {
ts->sched_timer.expires = next;
hrtimer_set_expires(&ts->sched_timer, next);
if (!tick_program_event(next, 0))
break;
next = ktime_add(next, tick_period);
......@@ -577,7 +579,7 @@ static void tick_nohz_kick_tick(int cpu)
* already reached or less/equal than the tick period.
*/
now = ktime_get();
delta = ktime_sub(ts->sched_timer.expires, now);
delta = ktime_sub(hrtimer_get_expires(&ts->sched_timer), now);
if (delta.tv64 <= tick_period.tv64)
return;
......@@ -678,16 +680,15 @@ void tick_setup_sched_timer(void)
ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
/* Get the next period (per cpu) */
ts->sched_timer.expires = tick_init_jiffy_update();
hrtimer_set_expires(&ts->sched_timer, tick_init_jiffy_update());
offset = ktime_to_ns(tick_period) >> 1;
do_div(offset, num_possible_cpus());
offset *= smp_processor_id();
ts->sched_timer.expires = ktime_add_ns(ts->sched_timer.expires, offset);
hrtimer_add_expires_ns(&ts->sched_timer, offset);
for (;;) {
hrtimer_forward(&ts->sched_timer, now, tick_period);
hrtimer_start(&ts->sched_timer, ts->sched_timer.expires,
HRTIMER_MODE_ABS);
hrtimer_start_expires(&ts->sched_timer, HRTIMER_MODE_ABS);
/* Check, if the timer was already in the past */
if (hrtimer_active(&ts->sched_timer))
break;
......
......@@ -66,9 +66,11 @@ print_timer(struct seq_file *m, struct hrtimer *taddr, struct hrtimer *timer,
SEQ_printf(m, ", %s/%d", tmp, timer->start_pid);
#endif
SEQ_printf(m, "\n");
SEQ_printf(m, " # expires at %Lu nsecs [in %Ld nsecs]\n",
(unsigned long long)ktime_to_ns(timer->expires),
(long long)(ktime_to_ns(timer->expires) - now));
SEQ_printf(m, " # expires at %Lu-%Lu nsecs [in %Ld to %Ld nsecs]\n",
(unsigned long long)ktime_to_ns(hrtimer_get_softexpires(timer)),
(unsigned long long)ktime_to_ns(hrtimer_get_expires(timer)),
(long long)(ktime_to_ns(hrtimer_get_softexpires(timer)) - now),
(long long)(ktime_to_ns(hrtimer_get_expires(timer)) - now));
}
static void
......
......@@ -545,9 +545,10 @@ static void cbq_ovl_delay(struct cbq_class *cl)
expires = ktime_set(0, 0);
expires = ktime_add_ns(expires, PSCHED_US2NS(sched));
if (hrtimer_try_to_cancel(&q->delay_timer) &&
ktime_to_ns(ktime_sub(q->delay_timer.expires,
ktime_to_ns(ktime_sub(
hrtimer_get_expires(&q->delay_timer),
expires)) > 0)
q->delay_timer.expires = expires;
hrtimer_set_expires(&q->delay_timer, expires);
hrtimer_restart(&q->delay_timer);
cl->delayed = 1;
cl->xstats.overactions++;
......
......@@ -34,7 +34,7 @@ enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle)
chip->thalf = 0;
if (!atomic_read(&chip->timer_active))
return HRTIMER_NORESTART;
hrtimer_forward(&chip->timer, chip->timer.expires,
hrtimer_forward(&chip->timer, hrtimer_get_expires(&chip->timer),
ktime_set(0, chip->ns_rem));
return HRTIMER_RESTART;
}
......@@ -118,7 +118,8 @@ enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle)
chip->ns_rem = PCSP_PERIOD_NS();
ns = (chip->thalf ? PCSP_CALC_NS(timer_cnt) : chip->ns_rem);
chip->ns_rem -= ns;
hrtimer_forward(&chip->timer, chip->timer.expires, ktime_set(0, ns));
hrtimer_forward(&chip->timer, hrtimer_get_expires(&chip->timer),
ktime_set(0, ns));
return HRTIMER_RESTART;
exit_nr_unlock2:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment