Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

Conflicts:
	drivers/net/wireless/iwlwifi/iwl-1000.c
	drivers/net/wireless/iwlwifi/iwl-6000.c
	drivers/net/wireless/iwlwifi/iwl-core.h

drivers/bluetooth/hci_ldisc.c

@@ -311,10 +311,12 @@ static void hci_uart_tty_close(struct tty_struct *tty)
 
 		if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
 			hu->proto->close(hu);
+			if (hdev) {
 				hci_unregister_dev(hdev);
 				hci_free_dev(hdev);
 			}
 		}
+	}
 }
 
 /* hci_uart_tty_wakeup()

drivers/net/wireless/iwlwifi/iwl-1000.c

@@ -311,6 +311,7 @@ struct iwl_cfg iwl100_bgn_cfg = {
 	.base_params = &iwl1000_base_params,
 	.ht_params = &iwl1000_ht_params,
 	.led_mode = IWL_LED_RF_STATE,
+	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl100_bg_cfg = {
@@ -324,6 +325,7 @@ struct iwl_cfg iwl100_bg_cfg = {
 	.mod_params = &iwlagn_mod_params,
 	.base_params = &iwl1000_base_params,
 	.led_mode = IWL_LED_RF_STATE,
+	.use_new_eeprom_reading = true,
 };
 
 MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));

drivers/net/wireless/iwlwifi/iwl-6000.c

@@ -564,6 +564,7 @@ struct iwl_cfg iwl6005_2agn_cfg = {
 	.need_dc_calib = true,
 	.need_temp_offset_calib = true,
 	.led_mode = IWL_LED_RF_STATE,
+	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl6005_2abg_cfg = {
@@ -579,6 +580,7 @@ struct iwl_cfg iwl6005_2abg_cfg = {
 	.need_dc_calib = true,
 	.need_temp_offset_calib = true,
 	.led_mode = IWL_LED_RF_STATE,
+	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl6005_2bg_cfg = {
@@ -594,6 +596,7 @@ struct iwl_cfg iwl6005_2bg_cfg = {
 	.need_dc_calib = true,
 	.need_temp_offset_calib = true,
 	.led_mode = IWL_LED_RF_STATE,
+	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl6030_2agn_cfg = {
@@ -614,6 +617,7 @@ struct iwl_cfg iwl6030_2agn_cfg = {
 	.adv_pm = true,
 	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl6030_2abg_cfg = {
@@ -633,6 +637,7 @@ struct iwl_cfg iwl6030_2abg_cfg = {
 	.adv_pm = true,
 	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl6030_2bgn_cfg = {
@@ -653,6 +658,7 @@ struct iwl_cfg iwl6030_2bgn_cfg = {
 	.adv_pm = true,
 	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl6030_2bg_cfg = {
@@ -672,6 +678,7 @@ struct iwl_cfg iwl6030_2bg_cfg = {
 	.adv_pm = true,
 	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl1030_bgn_cfg = {
@@ -692,6 +699,7 @@ struct iwl_cfg iwl1030_bgn_cfg = {
 	.adv_pm = true,
 	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl1030_bg_cfg = {
@@ -711,6 +719,7 @@ struct iwl_cfg iwl1030_bg_cfg = {
 	.adv_pm = true,
 	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+	.use_new_eeprom_reading = true,
 };
 
 /*
@@ -793,6 +802,7 @@ struct iwl_cfg iwl6150_bgn_cfg = {
 	.ht_params = &iwl6000_ht_params,
 	.need_dc_calib = true,
 	.led_mode = IWL_LED_RF_STATE,
+	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl6050_2abg_cfg = {
@@ -841,6 +851,7 @@ struct iwl_cfg iwl130_bgn_cfg = {
 	.adv_pm = true,
 	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl130_bg_cfg = {
@@ -859,6 +870,7 @@ struct iwl_cfg iwl130_bg_cfg = {
 	.adv_pm = true,
 	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+	.use_new_eeprom_reading = true,
 };
 
 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));

drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c

@@ -433,7 +433,7 @@ static s8 iwl_update_channel_txpower(struct iwl_priv *priv,
 /**
  * iwlcore_eeprom_enhanced_txpower: process enhanced tx power info
  */
-void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
+static void iwlcore_eeprom_enhanced_txpower_old(struct iwl_priv *priv)
 {
 	int eeprom_section_count = 0;
 	int section, element;
@@ -460,7 +460,8 @@ void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
 		 * always check for valid entry before process
 		 * the information
 		 */
-		if (!enhanced_txpower->common || enhanced_txpower->reserved)
+		if (!(enhanced_txpower->flags || enhanced_txpower->channel) ||
+		    enhanced_txpower->delta_20_in_40)
 			continue;
 
 		for (element = 0; element < eeprom_section_count; element++) {
@@ -493,3 +494,86 @@ void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
 		}
 	}
 }
+
+static void
+iwlcore_eeprom_enh_txp_read_element(struct iwl_priv *priv,
+				    struct iwl_eeprom_enhanced_txpwr *txp,
+				    s8 max_txpower_avg)
+{
+	int ch_idx;
+	bool is_ht40 = txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ;
+	enum ieee80211_band band;
+
+	band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ?
+		IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ;
+
+	for (ch_idx = 0; ch_idx < priv->channel_count; ch_idx++) {
+		struct iwl_channel_info *ch_info = &priv->channel_info[ch_idx];
+
+		/* update matching channel or from common data only */
+		if (txp->channel != 0 && ch_info->channel != txp->channel)
+			continue;
+
+		/* update matching band only */
+		if (band != ch_info->band)
+			continue;
+
+		if (ch_info->max_power_avg < max_txpower_avg && !is_ht40) {
+			ch_info->max_power_avg = max_txpower_avg;
+			ch_info->curr_txpow = max_txpower_avg;
+			ch_info->scan_power = max_txpower_avg;
+		}
+
+		if (is_ht40 && ch_info->ht40_max_power_avg < max_txpower_avg)
+			ch_info->ht40_max_power_avg = max_txpower_avg;
+	}
+}
+
+#define EEPROM_TXP_OFFS	(0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT)
+#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr)
+#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE)
+
+static void iwlcore_eeprom_enhanced_txpower_new(struct iwl_priv *priv)
+{
+	struct iwl_eeprom_enhanced_txpwr *txp_array, *txp;
+	int idx, entries;
+	__le16 *txp_len;
+	s8 max_txp_avg, max_txp_avg_halfdbm;
+
+	BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8);
+
+	/* the length is in 16-bit words, but we want entries */
+	txp_len = (__le16 *) iwlagn_eeprom_query_addr(priv, EEPROM_TXP_SZ_OFFS);
+	entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN;
+
+	txp_array = (void *) iwlagn_eeprom_query_addr(priv, EEPROM_TXP_OFFS);
+	for (idx = 0; idx < entries; idx++) {
+		txp = &txp_array[idx];
+
+		/* skip invalid entries */
+		if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID))
+			continue;
+
+		max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx,
+						      &max_txp_avg_halfdbm);
+
+		/*
+		 * Update the user limit values values to the highest
+		 * power supported by any channel
+		 */
+		if (max_txp_avg > priv->tx_power_user_lmt)
+			priv->tx_power_user_lmt = max_txp_avg;
+		if (max_txp_avg_halfdbm > priv->tx_power_lmt_in_half_dbm)
+			priv->tx_power_lmt_in_half_dbm = max_txp_avg_halfdbm;
+
+		iwlcore_eeprom_enh_txp_read_element(priv, txp, max_txp_avg);
+	}
+}
+
+void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
+{
+	if (priv->cfg->use_new_eeprom_reading)
+		iwlcore_eeprom_enhanced_txpower_new(priv);
+	else
+		iwlcore_eeprom_enhanced_txpower_old(priv);
+}

drivers/net/wireless/iwlwifi/iwl-agn-lib.c

@@ -568,6 +568,12 @@ static u32 eeprom_indirect_address(const struct iwl_priv *priv, u32 address)
 	case INDIRECT_REGULATORY:
 		offset = iwl_eeprom_query16(priv, EEPROM_LINK_REGULATORY);
 		break;
+	case INDIRECT_TXP_LIMIT:
+		offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT);
+		break;
+	case INDIRECT_TXP_LIMIT_SIZE:
+		offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT_SIZE);
+		break;
 	case INDIRECT_CALIBRATION:
 		offset = iwl_eeprom_query16(priv, EEPROM_LINK_CALIBRATION);
 		break;

drivers/net/wireless/iwlwifi/iwl-core.h

@@ -412,6 +412,7 @@ struct iwl_cfg {
 	u8 scan_tx_antennas[IEEE80211_NUM_BANDS];
 	enum iwl_led_mode led_mode;
 	const bool adv_pm;
+	const bool use_new_eeprom_reading; /* temporary, remove later */
 };
 
 /***************************

drivers/net/wireless/iwlwifi/iwl-eeprom.h

@@ -129,6 +129,17 @@ struct iwl_eeprom_channel {
 	s8 max_power_avg;	/* max power (dBm) on this chnl, limit 31 */
 } __packed;
 
+enum iwl_eeprom_enhanced_txpwr_flags {
+	IWL_EEPROM_ENH_TXP_FL_VALID		= BIT(0),
+	IWL_EEPROM_ENH_TXP_FL_BAND_52G		= BIT(1),
+	IWL_EEPROM_ENH_TXP_FL_OFDM		= BIT(2),
+	IWL_EEPROM_ENH_TXP_FL_40MHZ		= BIT(3),
+	IWL_EEPROM_ENH_TXP_FL_HT_AP		= BIT(4),
+	IWL_EEPROM_ENH_TXP_FL_RES1		= BIT(5),
+	IWL_EEPROM_ENH_TXP_FL_RES2		= BIT(6),
+	IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE	= BIT(7),
+};
+
 /**
  * iwl_eeprom_enhanced_txpwr structure
  *    This structure presents the enhanced regulatory tx power limit layout
@@ -136,21 +147,23 @@ struct iwl_eeprom_channel {
  *    Enhanced regulatory tx power portion of eeprom image can be broken down
  *    into individual structures; each one is 8 bytes in size and contain the
  *    following information
- * @common: (desc + channel) not used by driver, should _NOT_ be "zero"
+ * @flags: entry flags
+ * @channel: channel number
  * @chain_a_max_pwr: chain a max power in 1/2 dBm
  * @chain_b_max_pwr: chain b max power in 1/2 dBm
  * @chain_c_max_pwr: chain c max power in 1/2 dBm
- * @reserved: not used, should be "zero"
+ * @delta_20_in_40: 20-in-40 deltas (hi/lo)
  * @mimo2_max_pwr: mimo2 max power in 1/2 dBm
  * @mimo3_max_pwr: mimo3 max power in 1/2 dBm
  *
  */
 struct iwl_eeprom_enhanced_txpwr {
-	__le16 common;
+	u8 flags;
+	u8 channel;
 	s8 chain_a_max;
 	s8 chain_b_max;
 	s8 chain_c_max;
-	s8 reserved;
+	u8 delta_20_in_40;
 	s8 mimo2_max;
 	s8 mimo3_max;
 } __packed;
@@ -195,6 +208,8 @@ struct iwl_eeprom_enhanced_txpwr {
 #define EEPROM_LINK_CALIBRATION      (2*0x67)
 #define EEPROM_LINK_PROCESS_ADJST    (2*0x68)
 #define EEPROM_LINK_OTHERS           (2*0x69)
+#define EEPROM_LINK_TXP_LIMIT        (2*0x6a)
+#define EEPROM_LINK_TXP_LIMIT_SIZE   (2*0x6b)
 
 /* agn regulatory - indirect access */
 #define EEPROM_REG_BAND_1_CHANNELS       ((0x08)\
@@ -398,6 +413,8 @@ struct iwl_eeprom_calib_info {
 #define INDIRECT_CALIBRATION        0x00040000
 #define INDIRECT_PROCESS_ADJST      0x00050000
 #define INDIRECT_OTHERS             0x00060000
+#define INDIRECT_TXP_LIMIT          0x00070000
+#define INDIRECT_TXP_LIMIT_SIZE     0x00080000
 #define INDIRECT_ADDRESS            0x00100000
 
 /* General */

drivers/net/wireless/libertas/cfg.c

@@ -617,7 +617,7 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy,
 				     print_ssid(ssid_buf, ssid, ssid_len),
 				     LBS_SCAN_RSSI_TO_MBM(rssi)/100);
 
-			if (channel ||
+			if (channel &&
 			    !(channel->flags & IEEE80211_CHAN_DISABLED))
 				cfg80211_inform_bss(wiphy, channel,
 					bssid, le64_to_cpu(*(__le64 *)tsfdesc),

drivers/net/wireless/p54/p54usb.c

@@ -43,6 +43,7 @@ MODULE_FIRMWARE("isl3887usb");
 
 static struct usb_device_id p54u_table[] __devinitdata = {
 	/* Version 1 devices (pci chip + net2280) */
+	{USB_DEVICE(0x0411, 0x0050)},	/* Buffalo WLI2-USB2-G54 */
 	{USB_DEVICE(0x045e, 0x00c2)},	/* Microsoft MN-710 */
 	{USB_DEVICE(0x0506, 0x0a11)},	/* 3COM 3CRWE254G72 */
 	{USB_DEVICE(0x06b9, 0x0120)},	/* Thomson SpeedTouch 120g */
@@ -56,9 +57,13 @@ static struct usb_device_id p54u_table[] __devinitdata = {
 	{USB_DEVICE(0x0846, 0x4220)},	/* Netgear WG111 */
 	{USB_DEVICE(0x09aa, 0x1000)},	/* Spinnaker Proto board */
 	{USB_DEVICE(0x0cde, 0x0006)},	/* Medion 40900, Roper Europe */
+	{USB_DEVICE(0x0db0, 0x6826)},	/* MSI UB54G (MS-6826) */
 	{USB_DEVICE(0x107b, 0x55f2)},	/* Gateway WGU-210 (Gemtek) */
 	{USB_DEVICE(0x124a, 0x4023)},	/* Shuttle PN15, Airvast WM168g, IOGear GWU513 */
+	{USB_DEVICE(0x1435, 0x0210)},	/* Inventel UR054G */
+	{USB_DEVICE(0x15a9, 0x0002)},	/* Gemtek WUBI-100GW 802.11g */
 	{USB_DEVICE(0x1630, 0x0005)},	/* 2Wire 802.11g USB (v1) / Z-Com */
+	{USB_DEVICE(0x182d, 0x096b)},	/* Sitecom WL-107 */
 	{USB_DEVICE(0x1915, 0x2234)},	/* Linksys WUSB54G OEM */
 	{USB_DEVICE(0x1915, 0x2235)},	/* Linksys WUSB54G Portable OEM */
 	{USB_DEVICE(0x2001, 0x3701)},	/* DLink DWL-G120 Spinnaker */
@@ -94,6 +99,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
 	{USB_DEVICE(0x1435, 0x0427)},	/* Inventel UR054G */
 	{USB_DEVICE(0x1668, 0x1050)},	/* Actiontec 802UIG-1 */
 	{USB_DEVICE(0x2001, 0x3704)},	/* DLink DWL-G122 rev A2 */
+	{USB_DEVICE(0x2001, 0x3705)},	/* D-Link DWL-G120 rev C1 */
 	{USB_DEVICE(0x413c, 0x5513)},	/* Dell WLA3310 USB Wireless Adapter */
 	{USB_DEVICE(0x413c, 0x8102)},	/* Spinnaker DUT */
 	{USB_DEVICE(0x413c, 0x8104)},	/* Cohiba Proto board */

net/bluetooth/rfcomm/core.c

@@ -311,6 +311,7 @@ static void rfcomm_dlc_clear_state(struct rfcomm_dlc *d)
 	d->state      = BT_OPEN;
 	d->flags      = 0;
 	d->mscex      = 0;
+	d->sec_level  = BT_SECURITY_LOW;
 	d->mtu        = RFCOMM_DEFAULT_MTU;
 	d->v24_sig    = RFCOMM_V24_RTC | RFCOMM_V24_RTR | RFCOMM_V24_DV;
 

net/mac80211/ibss.c

@@ -780,6 +780,9 @@ void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
 
 	mutex_lock(&sdata->u.ibss.mtx);
 
+	if (!sdata->u.ibss.ssid_len)
+		goto mgmt_out; /* not ready to merge yet */
+
 	switch (fc & IEEE80211_FCTL_STYPE) {
 	case IEEE80211_STYPE_PROBE_REQ:
 		ieee80211_rx_mgmt_probe_req(sdata, mgmt, skb->len);
@@ -797,6 +800,7 @@ void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
 		break;
 	}
 
+ mgmt_out:
 	mutex_unlock(&sdata->u.ibss.mtx);
 }
 

net/mac80211/work.c

@@ -1074,11 +1074,13 @@ void ieee80211_work_purge(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_work *wk;
+	bool cleanup = false;
 
 	mutex_lock(&local->mtx);
 	list_for_each_entry(wk, &local->work_list, list) {
 		if (wk->sdata != sdata)
 			continue;
+		cleanup = true;
 		wk->type = IEEE80211_WORK_ABORT;
 		wk->started = true;
 		wk->timeout = jiffies;
@@ -1086,6 +1088,7 @@ void ieee80211_work_purge(struct ieee80211_sub_if_data *sdata)
 	mutex_unlock(&local->mtx);
 
 	/* run cleanups etc. */
+	if (cleanup)
 		ieee80211_work_work(&local->work_work);
 
 	mutex_lock(&local->mtx);