Skip to content

L
linux
Commit 200d018e authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus 

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [PATCH] add STB810 support (Philips PNX8550-based)
  [MIPS] Qemu now has an ELF loader.
  [MIPS] Add GENERIC_HARDIRQS_NO__DO_IRQ for i8259 users
  [MIPS] Optimize csum_partial for 64bit kernel
  [MIPS] Optimize flow of csum_partial
  [MIPS] Make csum_partial more readable
  [MIPS] Rename SNI_RM200_PCI to just SNI_RM preparing for more RM machines
parents eb991b39 f0647a52
Hide whitespace changes
Inline Side-by-side
Showing with 1602 additions and 259 deletions
arch/mips/Kconfig
View file @ 200d018e
......@@ -165,6 +165,7 @@ config MIPS_COBALT
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_LITTLE_ENDIAN
select GENERIC_HARDIRQS_NO__DO_IRQ
config MACH_DECSTATION
bool "DECstations"
......@@ -225,6 +226,7 @@ config MACH_JAZZ
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_100HZ
select GENERIC_HARDIRQS_NO__DO_IRQ
help
This a family of machines based on the MIPS R4030 chipset which was
used by several vendors to build RISC/os and Windows NT workstations.
......@@ -459,6 +461,11 @@ config PNX8550_JBS
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_STB810
bool "Support for Philips PNX8550 based STB810 board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config DDB5477
bool "NEC DDB Vrc-5477"
select DDB5XXX_COMMON
......@@ -482,6 +489,7 @@ config MACH_VR41XX
select SYS_HAS_CPU_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select GENERIC_HARDIRQS_NO__DO_IRQ
config PMC_YOSEMITE
bool "PMC-Sierra Yosemite eval board"
......@@ -515,6 +523,7 @@ config QEMU
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
select ARCH_SPARSEMEM_ENABLE
select GENERIC_HARDIRQS_NO__DO_IRQ
help
Qemu is a software emulator which among other architectures also
can simulate a MIPS32 4Kc system. This patch adds support for the
......@@ -701,8 +710,8 @@ config SIBYTE_CRHONE
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
config SNI_RM200_PCI
bool "SNI RM200 PCI"
config SNI_RM
bool "SNI RM200/300/400"
select ARC if CPU_LITTLE_ENDIAN
select ARC32 if CPU_LITTLE_ENDIAN
select ARCH_MAY_HAVE_PC_FDC
......@@ -725,8 +734,8 @@ config SNI_RM200_PCI
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
help
The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
Nixdorf Informationssysteme (SNI), parent company of Pyramid
The SNI RM200/300/400 are MIPS-based machines manufactured by
Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
Technology and now in turn merged with Fujitsu. Say Y here to
support this machine type.
......@@ -754,6 +763,7 @@ config TOSHIBA_RBTX4927
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select TOSHIBA_BOARDS
select GENERIC_HARDIRQS_NO__DO_IRQ
help
This Toshiba board is based on the TX4927 processor. Say Y here to
support this machine type
......@@ -773,6 +783,7 @@ config TOSHIBA_RBTX4938
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
select TOSHIBA_BOARDS
select GENERIC_HARDIRQS_NO__DO_IRQ
help
This Toshiba board is based on the TX4938 processor. Say Y here to
support this machine type
......@@ -1070,16 +1081,16 @@ config HAVE_STD_PC_SERIAL_PORT
config ARC_CONSOLE
bool "ARC console support"
depends on SGI_IP22 || SNI_RM200_PCI
depends on SGI_IP22 || SNI_RM
config ARC_MEMORY
bool
depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
depends on MACH_JAZZ || SNI_RM || SGI_IP32
default y
config ARC_PROMLIB
bool
depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP32
default y
config ARC64
......
arch/mips/Makefile
View file @ 200d018e
......@@ -463,6 +463,11 @@ libs-$(CONFIG_PNX8550_JBS) += arch/mips/philips/pnx8550/jbs/
#cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550
load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000
# Philips PNX8550 STB810 board
#
libs-$(CONFIG_PNX8550_STB810) += arch/mips/philips/pnx8550/stb810/
load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000
# NEC EMMA2RH boards
#
core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/
......@@ -569,11 +574,11 @@ libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
#
# SNI RM200 PCI
# SNI RM
#
core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/
cflags-$(CONFIG_SNI_RM200_PCI) += -Iinclude/asm-mips/mach-rm200
load-$(CONFIG_SNI_RM200_PCI) += 0xffffffff80600000
core-$(CONFIG_SNI_RM) += arch/mips/sni/
cflags-$(CONFIG_SNI_RM) += -Iinclude/asm-mips/mach-rm
load-$(CONFIG_SNI_RM) += 0xffffffff80600000
#
# Toshiba JMR-TX3927 board
......@@ -695,7 +700,7 @@ ifdef CONFIG_QEMU
all: vmlinux.bin
endif
ifdef CONFIG_SNI_RM200_PCI
ifdef CONFIG_SNI_RM
all: vmlinux.ecoff
endif
......
arch/mips/configs/atlas_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS_ATLAS=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/bigsur_defconfig
View file @ 200d018e
......@@ -57,7 +57,7 @@ CONFIG_SIBYTE_BIGSUR=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/capcella_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MACH_VR41XX=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/cobalt_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS_COBALT=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/db1000_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS_DB1000=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/db1100_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS_DB1100=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/db1200_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS_DB1200=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/db1500_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS_DB1500=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/db1550_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS_DB1550=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/ddb5477_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_DDB5477=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/decstation_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MACH_DECSTATION=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/e55_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MACH_VR41XX=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/emma2rh_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MARKEINS=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/ev64120_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS_EV64120=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/excite_defconfig
View file @ 200d018e
......@@ -60,7 +60,7 @@ CONFIG_BASLER_EXCITE=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/ip22_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_SGI_IP22=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/ip27_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_SGI_IP27=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/ip32_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_SGI_IP32=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/jaguar-atx_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MOMENCO_JAGUAR_ATX=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/jazz_defconfig
View file @ 200d018e
......@@ -57,7 +57,7 @@ CONFIG_MACH_JAZZ=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/jmr3927_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
CONFIG_TOSHIBA_JMR3927=y
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/lasat200_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_LASAT=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/malta_defconfig
View file @ 200d018e
......@@ -57,7 +57,7 @@ CONFIG_MIPS_MALTA=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/mipssim_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS_SIM=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/mpc30x_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MACH_VR41XX=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/ocelot_3_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MOMENCO_OCELOT_3=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/ocelot_c_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MOMENCO_OCELOT_C=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/ocelot_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MOMENCO_OCELOT=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/ocelot_g_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MOMENCO_OCELOT_G=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/pb1100_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS_PB1100=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/pb1500_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS_PB1500=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/pb1550_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS_PB1550=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/pnx8550-jbs_defconfig
View file @ 200d018e
......@@ -57,7 +57,7 @@ CONFIG_PNX8550_JBS=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/pnx8550-stb810_defconfig 0 → 100644
View file @ 200d018e
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19
# Thu Dec 7 16:35:12 2006
#
CONFIG_MIPS=y
#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_PB1550 is not set
# CONFIG_MIPS_PB1200 is not set
# CONFIG_MIPS_DB1000 is not set
# CONFIG_MIPS_DB1100 is not set
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_3 is not set
# CONFIG_MOMENCO_OCELOT_C is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
CONFIG_PNX8550_STB810=y
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_PTSWARM is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_KEXEC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_PNX8550=y
CONFIG_SOC_PNX8550=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPSR1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
#
# Kernel type
#
CONFIG_32BIT=y
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_256 is not set
# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_MMU=y
#
# PCCARD (PCMCIA/CardBus) support
#
#
# PCI Hotplug Support
#
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_DM9000 is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_PNX8XXX is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
CONFIG_HEADERS_CHECK=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_KGDB is not set
# CONFIG_RUNTIME_DEBUG is not set
# CONFIG_MIPS_UNCACHED is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_PLIST=y
arch/mips/configs/pnx8550-v2pci_defconfig
View file @ 200d018e
......@@ -57,7 +57,7 @@ CONFIG_PNX8550_V2PCI=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/qemu_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_QEMU=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/rbhma4500_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_TOSHIBA_RBTX4938=y
......
arch/mips/configs/rm200_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
CONFIG_SNI_RM200_PCI=y
CONFIG_SNI_RM=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/sb1250-swarm_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_SIBYTE_SWARM=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/sead_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MIPS_SEAD=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/tb0226_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MACH_VR41XX=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/tb0229_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MACH_VR41XX=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/tb0287_defconfig
View file @ 200d018e
......@@ -57,7 +57,7 @@ CONFIG_MACH_VR41XX=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/workpad_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_MACH_VR41XX=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/wrppmc_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_WR_PPMC=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/configs/yosemite_defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_PMC_YOSEMITE=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/defconfig
View file @ 200d018e
......@@ -59,7 +59,7 @@ CONFIG_SGI_IP22=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
......
arch/mips/kernel/head.S
View file @ 200d018e
......@@ -138,7 +138,7 @@
EXPORT(stext) # used for profiling
EXPORT(_stext)
#if defined(CONFIG_QEMU) || defined(CONFIG_MIPS_SIM)
#ifdef CONFIG_MIPS_SIM
/*
* Give us a fighting chance of running if execution beings at the
* kernel load address. This is needed because this platform does
......
arch/mips/lib/csum_partial.S
View file @ 200d018e
......@@ -12,43 +12,66 @@
#include <asm/regdef.h>
#ifdef CONFIG_64BIT
#define T0 ta0
#define T1 ta1
#define T2 ta2
#define T3 ta3
#define T4 t0
#define T7 t3
#else
#define T0 t0
#define T1 t1
#define T2 t2
#define T3 t3
#define T4 t4
#define T7 t7
/*
* As we are sharing code base with the mips32 tree (which use the o32 ABI
* register definitions). We need to redefine the register definitions from
* the n64 ABI register naming to the o32 ABI register naming.
*/
#undef t0
#undef t1
#undef t2
#undef t3
#define t0 $8
#define t1 $9
#define t2 $10
#define t3 $11
#define t4 $12
#define t5 $13
#define t6 $14
#define t7 $15
#define USE_DOUBLE
#endif
#ifdef USE_DOUBLE
#define LOAD ld
#define ADD daddu
#define NBYTES 8
#else
#define LOAD lw
#define ADD addu
#define NBYTES 4
#endif /* USE_DOUBLE */
#define UNIT(unit) ((unit)*NBYTES)
#define ADDC(sum,reg) \
addu sum, reg; \
ADD sum, reg; \
sltu v1, sum, reg; \
addu sum, v1
ADD sum, v1
#define CSUM_BIGCHUNK(src, offset, sum, _t0, _t1, _t2, _t3) \
lw _t0, (offset + 0x00)(src); \
lw _t1, (offset + 0x04)(src); \
lw _t2, (offset + 0x08)(src); \
lw _t3, (offset + 0x0c)(src); \
ADDC(sum, _t0); \
ADDC(sum, _t1); \
ADDC(sum, _t2); \
ADDC(sum, _t3); \
lw _t0, (offset + 0x10)(src); \
lw _t1, (offset + 0x14)(src); \
lw _t2, (offset + 0x18)(src); \
lw _t3, (offset + 0x1c)(src); \
#define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \
LOAD _t0, (offset + UNIT(0))(src); \
LOAD _t1, (offset + UNIT(1))(src); \
LOAD _t2, (offset + UNIT(2))(src); \
LOAD _t3, (offset + UNIT(3))(src); \
ADDC(sum, _t0); \
ADDC(sum, _t1); \
ADDC(sum, _t2); \
ADDC(sum, _t3); \
ADDC(sum, _t3)
#ifdef USE_DOUBLE
#define CSUM_BIGCHUNK(src, offset, sum, _t0, _t1, _t2, _t3) \
CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3)
#else
#define CSUM_BIGCHUNK(src, offset, sum, _t0, _t1, _t2, _t3) \
CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3); \
CSUM_BIGCHUNK1(src, offset + 0x10, sum, _t0, _t1, _t2, _t3)
#endif
/*
* a0: source address
......@@ -61,86 +84,27 @@
.text
.set noreorder
/* unknown src alignment and < 8 bytes to go */
small_csumcpy:
move a1, T2
andi T0, a1, 4
beqz T0, 1f
andi T0, a1, 2
/* Still a full word to go */
ulw T1, (src)
PTR_ADDIU src, 4
ADDC(sum, T1)
1: move T1, zero
beqz T0, 1f
andi T0, a1, 1
/* Still a halfword to go */
ulhu T1, (src)
PTR_ADDIU src, 2
1: beqz T0, 1f
sll T1, T1, 16
lbu T2, (src)
nop
#ifdef __MIPSEB__
sll T2, T2, 8
#endif
or T1, T2
1: ADDC(sum, T1)
/* fold checksum */
sll v1, sum, 16
addu sum, v1
sltu v1, sum, v1
srl sum, sum, 16
addu sum, v1
/* odd buffer alignment? */
beqz T7, 1f
nop
sll v1, sum, 8
srl sum, sum, 8
or sum, v1
andi sum, 0xffff
1:
.set reorder
/* Add the passed partial csum. */
ADDC(sum, a2)
jr ra
.set noreorder
/* ------------------------------------------------------------------------- */
.align 5
LEAF(csum_partial)
move sum, zero
move T7, zero
move t7, zero
sltiu t8, a1, 0x8
bnez t8, small_csumcpy /* < 8 bytes to copy */
move T2, a1
move t2, a1
beqz a1, out
andi T7, src, 0x1 /* odd buffer? */
andi t7, src, 0x1 /* odd buffer? */
hword_align:
beqz T7, word_align
beqz t7, word_align
andi t8, src, 0x2
lbu T0, (src)
lbu t0, (src)
LONG_SUBU a1, a1, 0x1
#ifdef __MIPSEL__
sll T0, T0, 8
sll t0, t0, 8
#endif
ADDC(sum, T0)
ADDC(sum, t0)
PTR_ADDU src, src, 0x1
andi t8, src, 0x2
......@@ -148,9 +112,9 @@ word_align:
beqz t8, dword_align
sltiu t8, a1, 56
lhu T0, (src)
lhu t0, (src)
LONG_SUBU a1, a1, 0x2
ADDC(sum, T0)
ADDC(sum, t0)
sltiu t8, a1, 56
PTR_ADDU src, src, 0x2
......@@ -162,9 +126,9 @@ dword_align:
beqz t8, qword_align
andi t8, src, 0x8
lw T0, 0x00(src)
lw t0, 0x00(src)
LONG_SUBU a1, a1, 0x4
ADDC(sum, T0)
ADDC(sum, t0)
PTR_ADDU src, src, 0x4
andi t8, src, 0x8
......@@ -172,11 +136,17 @@ qword_align:
beqz t8, oword_align
andi t8, src, 0x10
lw T0, 0x00(src)
lw T1, 0x04(src)
#ifdef USE_DOUBLE
ld t0, 0x00(src)
LONG_SUBU a1, a1, 0x8
ADDC(sum, t0)
#else
lw t0, 0x00(src)
lw t1, 0x04(src)
LONG_SUBU a1, a1, 0x8
ADDC(sum, T0)
ADDC(sum, T1)
ADDC(sum, t0)
ADDC(sum, t1)
#endif
PTR_ADDU src, src, 0x8
andi t8, src, 0x10
......@@ -184,75 +154,120 @@ oword_align:
beqz t8, begin_movement
LONG_SRL t8, a1, 0x7
lw T3, 0x08(src)
lw T4, 0x0c(src)
lw T0, 0x00(src)
lw T1, 0x04(src)
ADDC(sum, T3)
ADDC(sum, T4)
ADDC(sum, T0)
ADDC(sum, T1)
#ifdef USE_DOUBLE
ld t0, 0x00(src)
ld t1, 0x08(src)
ADDC(sum, t0)
ADDC(sum, t1)
#else
CSUM_BIGCHUNK1(src, 0x00, sum, t0, t1, t3, t4)
#endif
LONG_SUBU a1, a1, 0x10
PTR_ADDU src, src, 0x10
LONG_SRL t8, a1, 0x7
begin_movement:
beqz t8, 1f
andi T2, a1, 0x40
andi t2, a1, 0x40
move_128bytes:
CSUM_BIGCHUNK(src, 0x00, sum, T0, T1, T3, T4)
CSUM_BIGCHUNK(src, 0x20, sum, T0, T1, T3, T4)
CSUM_BIGCHUNK(src, 0x40, sum, T0, T1, T3, T4)
CSUM_BIGCHUNK(src, 0x60, sum, T0, T1, T3, T4)
CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4)
CSUM_BIGCHUNK(src, 0x20, sum, t0, t1, t3, t4)
CSUM_BIGCHUNK(src, 0x40, sum, t0, t1, t3, t4)
CSUM_BIGCHUNK(src, 0x60, sum, t0, t1, t3, t4)
LONG_SUBU t8, t8, 0x01
bnez t8, move_128bytes
PTR_ADDU src, src, 0x80
1:
beqz T2, 1f
andi T2, a1, 0x20
beqz t2, 1f
andi t2, a1, 0x20
move_64bytes:
CSUM_BIGCHUNK(src, 0x00, sum, T0, T1, T3, T4)
CSUM_BIGCHUNK(src, 0x20, sum, T0, T1, T3, T4)
CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4)
CSUM_BIGCHUNK(src, 0x20, sum, t0, t1, t3, t4)
PTR_ADDU src, src, 0x40
1:
beqz T2, do_end_words
beqz t2, do_end_words
andi t8, a1, 0x1c
move_32bytes:
CSUM_BIGCHUNK(src, 0x00, sum, T0, T1, T3, T4)
CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4)
andi t8, a1, 0x1c
PTR_ADDU src, src, 0x20
do_end_words:
beqz t8, maybe_end_cruft
LONG_SRL t8, t8, 0x2
beqz t8, small_csumcpy
andi t2, a1, 0x3
LONG_SRL t8, t8, 0x2
end_words:
lw T0, (src)
lw t0, (src)
LONG_SUBU t8, t8, 0x1
ADDC(sum, T0)
ADDC(sum, t0)
bnez t8, end_words
PTR_ADDU src, src, 0x4
maybe_end_cruft:
andi T2, a1, 0x3
/* unknown src alignment and < 8 bytes to go */
small_csumcpy:
move a1, t2
small_memcpy:
j small_csumcpy; move a1, T2 /* XXX ??? */
beqz t2, out
move a1, T2
andi t0, a1, 4
beqz t0, 1f
andi t0, a1, 2
end_bytes:
lb T0, (src)
LONG_SUBU a1, a1, 0x1
bnez a2, end_bytes
PTR_ADDU src, src, 0x1
/* Still a full word to go */
ulw t1, (src)
PTR_ADDIU src, 4
ADDC(sum, t1)
1: move t1, zero
beqz t0, 1f
andi t0, a1, 1
/* Still a halfword to go */
ulhu t1, (src)
PTR_ADDIU src, 2
1: beqz t0, 1f
sll t1, t1, 16
lbu t2, (src)
nop
out:
#ifdef __MIPSEB__
sll t2, t2, 8
#endif
or t1, t2
1: ADDC(sum, t1)
/* fold checksum */
#ifdef USE_DOUBLE
dsll32 v1, sum, 0
daddu sum, v1
sltu v1, sum, v1
dsra32 sum, sum, 0
addu sum, v1
#endif
sll v1, sum, 16
addu sum, v1
sltu v1, sum, v1
srl sum, sum, 16
addu sum, v1
/* odd buffer alignment? */
beqz t7, 1f
nop
sll v1, sum, 8
srl sum, sum, 8
or sum, v1
andi sum, 0xffff
1:
.set reorder
/* Add the passed partial csum. */
ADDC(sum, a2)
jr ra
move v0, sum
.set noreorder
END(csum_partial)
arch/mips/pci/Makefile
View file @ 200d018e
......@@ -43,7 +43,7 @@ obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o
obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
......
arch/mips/pci/fixup-pnx8550.c
View file @ 200d018e
......@@ -33,7 +33,7 @@
#define DBG(x...)
#endif
extern char irq_tab_jbs[][5];
extern char pnx8550_irq_tab[][5];
void __init pcibios_fixup_resources(struct pci_dev *dev)
{
......@@ -47,7 +47,7 @@ void __init pcibios_fixup(void)
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
return irq_tab_jbs[slot][pin];
return pnx8550_irq_tab[slot][pin];
}
/* Do platform specific device initialization at pci_enable_device() time */
......
arch/mips/philips/pnx8550/common/prom.c
View file @ 200d018e
......@@ -35,23 +35,15 @@ char * prom_getcmdline(void)
return &(arcs_cmdline[0]);
}
void prom_init_cmdline(void)
void __init prom_init_cmdline(void)
{
char *cp;
int actr;
actr = 1; /* Always ignore argv[0] */
int i;
cp = &(arcs_cmdline[0]);
while(actr < prom_argc) {
strcpy(cp, prom_argv[actr]);
cp += strlen(prom_argv[actr]);
*cp++ = ' ';
actr++;
arcs_cmdline[0] = '\0';
for (i = 0; i < prom_argc; i++) {
strcat(arcs_cmdline, prom_argv[i]);
strcat(arcs_cmdline, " ");
}
if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
--cp;
*cp = '\0';
}
char *prom_getenv(char *envname)
......
arch/mips/philips/pnx8550/jbs/irqmap.c
View file @ 200d018e
......@@ -28,9 +28,9 @@
#include <linux/init.h>
#include <int.h>
char irq_tab_jbs[][5] __initdata = {
[8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
[9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
[17] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
char pnx8550_irq_tab[][5] __initdata = {
[8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
[9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
[17] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
};
arch/mips/philips/pnx8550/stb810/Makefile 0 → 100644
View file @ 200d018e
# Makefile for the Philips STB810 Board.
lib-y := prom_init.o board_setup.o irqmap.o
arch/mips/philips/pnx8550/stb810/board_setup.c 0 → 100644
View file @ 200d018e
/*
* STB810 specific board startup routines.
*
* Based on the arch/mips/philips/pnx8550/jbs/board_setup.c
*
* Author: MontaVista Software, Inc.
* source@mvista.com
*
* Copyright 2005 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/mc146818rtc.h>
#include <linux/delay.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <glb.h>
void __init board_setup(void)
{
unsigned long config0, configpr;
config0 = read_c0_config();
/* clear all three cache coherency fields */
config0 &= ~(0x7 | (7<<25) | (7<<28));
config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
(CONF_CM_DEFAULT<<28));
write_c0_config(config0);
configpr = read_c0_config7();
configpr |= (1<<19); /* enable tlb */
write_c0_config7(configpr);
}
arch/mips/philips/pnx8550/stb810/irqmap.c 0 → 100644
View file @ 200d018e
/*
* Philips STB810 board irqmap.
*
* Author: MontaVista Software, Inc.
* source@mvista.com
*
* Copyright 2005 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <int.h>
char pnx8550_irq_tab[][5] __initdata = {
[8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
[9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
[10] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
};
arch/mips/philips/pnx8550/stb810/prom_init.c 0 → 100644
View file @ 200d018e
/*
* STB810 specific prom routines
*
* Author: MontaVista Software, Inc.
* source@mvista.com
*
* Copyright 2005 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <linux/string.h>
#include <linux/kernel.h>
int prom_argc;
char **prom_argv, **prom_envp;
extern void __init prom_init_cmdline(void);
extern char *prom_getenv(char *envname);
const char *get_system_type(void)
{
return "Philips PNX8550/STB810";
}
void __init prom_init(void)
{
unsigned long memsize;
prom_argc = (int) fw_arg0;
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
prom_init_cmdline();
mips_machgroup = MACH_GROUP_PHILIPS;
mips_machtype = MACH_PHILIPS_STB810;
memsize = 0x08000000; /* Trimedia uses memory above */
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
View file @ 200d018e
......@@ -158,7 +158,6 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB
#define TOSHIBA_RBTX4927_IRQ_ISA_ENABLE ( 1 << 23 )
#define TOSHIBA_RBTX4927_IRQ_ISA_DISABLE ( 1 << 24 )
#define TOSHIBA_RBTX4927_IRQ_ISA_MASK ( 1 << 25 )
#define TOSHIBA_RBTX4927_IRQ_ISA_ENDIRQ ( 1 << 26 )
#define TOSHIBA_RBTX4927_SETUP_ALL 0xffffffff
#endif
......@@ -175,7 +174,6 @@ static const u32 toshiba_rbtx4927_irq_debug_flag =
// | TOSHIBA_RBTX4927_IRQ_ISA_ENABLE
// | TOSHIBA_RBTX4927_IRQ_ISA_DISABLE
// | TOSHIBA_RBTX4927_IRQ_ISA_MASK
// | TOSHIBA_RBTX4927_IRQ_ISA_ENDIRQ
);
#endif
......@@ -226,7 +224,6 @@ static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq);
static void toshiba_rbtx4927_irq_isa_enable(unsigned int irq);
static void toshiba_rbtx4927_irq_isa_disable(unsigned int irq);
static void toshiba_rbtx4927_irq_isa_mask_and_ack(unsigned int irq);
static void toshiba_rbtx4927_irq_isa_end(unsigned int irq);
#endif
#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC"
......@@ -249,7 +246,6 @@ static struct irq_chip toshiba_rbtx4927_irq_isa_type = {
.mask = toshiba_rbtx4927_irq_isa_disable,
.mask_ack = toshiba_rbtx4927_irq_isa_mask_and_ack,
.unmask = toshiba_rbtx4927_irq_isa_enable,
.end = toshiba_rbtx4927_irq_isa_end,
};
#endif
......@@ -402,7 +398,8 @@ static void __init toshiba_rbtx4927_irq_isa_init(void)
for (i = TOSHIBA_RBTX4927_IRQ_ISA_BEG;
i <= TOSHIBA_RBTX4927_IRQ_ISA_END; i++)
set_irq_chip(i, &toshiba_rbtx4927_irq_isa_type);
set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_isa_type,
handle_level_irq);
setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC,
&toshiba_rbtx4927_irq_isa_master);
......@@ -470,26 +467,6 @@ static void toshiba_rbtx4927_irq_isa_mask_and_ack(unsigned int irq)
#endif
#ifdef CONFIG_TOSHIBA_FPCIB0
static void toshiba_rbtx4927_irq_isa_end(unsigned int irq)
{
TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_ISA_ENDIRQ,
"irq=%d\n", irq);
if (irq < TOSHIBA_RBTX4927_IRQ_ISA_BEG
|| irq > TOSHIBA_RBTX4927_IRQ_ISA_END) {
TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR,
"bad irq=%d\n", irq);
panic("\n");
}
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
toshiba_rbtx4927_irq_isa_enable(irq);
}
}
#endif
void __init arch_init_irq(void)
{
extern void tx4927_irq_init(void);
......
arch/mips/vr41xx/Kconfig
View file @ 200d018e
......@@ -6,7 +6,6 @@ config CASIO_E55
select ISA
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select GENERIC_HARDIRQS_NO__DO_IRQ
config IBM_WORKPAD
bool "Support for IBM WorkPad z50"
......@@ -16,7 +15,6 @@ config IBM_WORKPAD
select ISA
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select GENERIC_HARDIRQS_NO__DO_IRQ
config NEC_CMBVR4133
bool "Support for NEC CMB-VR4133"
......@@ -41,7 +39,6 @@ config TANBAC_TB022X
select IRQ_CPU
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select GENERIC_HARDIRQS_NO__DO_IRQ
help
The TANBAC VR4131 multichip module(TB0225) and
the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
......@@ -74,7 +71,6 @@ config VICTOR_MPC30X
select IRQ_CPU
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select GENERIC_HARDIRQS_NO__DO_IRQ
config ZAO_CAPCELLA
bool "Support for ZAO Networks Capcella"
......@@ -84,7 +80,6 @@ config ZAO_CAPCELLA
select IRQ_CPU
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select GENERIC_HARDIRQS_NO__DO_IRQ
config PCI_VR41XX
bool "Add PCI control unit support of NEC VR4100 series"
......
arch/mips/vr41xx/nec-cmbvr4133/irq.c
View file @ 200d018e
......@@ -45,19 +45,12 @@ static void ack_i8259_irq(unsigned int irq)
mask_and_ack_8259A(irq - I8259_IRQ_BASE);
}
static void end_i8259_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_8259A_irq(irq - I8259_IRQ_BASE);
}
static struct irq_chip i8259_irq_type = {
.typename = "XT-PIC",
.ack = ack_i8259_irq,
.mask = disable_i8259_irq,
.mask_ack = ack_i8259_irq,
.unmask = enable_i8259_irq,
.end = end_i8259_irq,
};
static int i8259_get_irq_number(int irq)
......@@ -92,7 +85,7 @@ void __init rockhopper_init_irq(void)
}
for (i = I8259_IRQ_BASE; i <= I8259_IRQ_LAST; i++)
set_irq_chip(i, &i8259_irq_type);
set_irq_chip_and_handler(i, &i8259_irq_type, handle_level_irq);
setup_irq(I8259_SLAVE_IRQ, &i8259_slave_cascade);
......
fs/partitions/Kconfig
View file @ 200d018e
......@@ -194,7 +194,7 @@ config LDM_DEBUG
config SGI_PARTITION
bool "SGI partition support" if PARTITION_ADVANCED
default y if (SGI_IP22 || SGI_IP27 || ((MACH_JAZZ || SNI_RM200_PCI) && !CPU_LITTLE_ENDIAN))
default y if (SGI_IP22 || SGI_IP27 || ((MACH_JAZZ || SNI_RM) && !CPU_LITTLE_ENDIAN))
help
Say Y here if you would like to be able to read the hard disk
partition table format used by SGI machines.
......
include/asm-mips/bootinfo.h
View file @ 200d018e
......@@ -131,6 +131,7 @@
#define MACH_PHILIPS_NINO 0 /* Nino */
#define MACH_PHILIPS_VELO 1 /* Velo */
#define MACH_PHILIPS_JBS 2 /* JBS */
#define MACH_PHILIPS_STB810 3 /* STB810 */
/*
* Valid machtype for group SIBYTE
......
include/asm-mips/war.h
View file @ 200d018e
......@@ -76,7 +76,7 @@
/*
* But the RM200C seems to have been shipped only with V2.0 R4600s
*/
#ifdef CONFIG_SNI_RM200_PCI
#ifdef CONFIG_SNI_RM
#define R4600_V2_HIT_CACHEOP_WAR 1
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7