[CPUFREQ] nforce2: Use driver prefix, not cpufreq prefix.

Signed-off-by: Dave Jones <davej@redhat.com>

arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c

@@ -56,6 +56,7 @@ MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
 MODULE_PARM_DESC(min_fsb,
 		"Minimum FSB to use, if not defined: current FSB - 50");
 
+#define PFX "cpufreq-nforce2: "
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
 		"cpufreq-nforce2", msg)
 
@@ -175,13 +176,13 @@ static int nforce2_set_fsb(unsigned int fsb)
 	int pll = 0;
 
 	if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
-		printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb);
+		printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb);
 		return -EINVAL;
 	}
 
 	tfsb = nforce2_fsb_read(0);
 	if (!tfsb) {
-		printk(KERN_ERR "cpufreq: Error while reading the FSB\n");
+		printk(KERN_ERR PFX "Error while reading the FSB\n");
 		return -EINVAL;
 	}
 
@@ -278,7 +279,7 @@ static int nforce2_target(struct cpufreq_policy *policy,
 	/* local_irq_save(flags); */
 
 	if (nforce2_set_fsb(target_fsb) < 0)
-		printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n",
+		printk(KERN_ERR PFX "Changing FSB to %d failed\n",
 			target_fsb);
 	else
 		dprintk("Changed FSB successfully to %d\n",
@@ -329,9 +330,8 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 	/* FIX: Get FID from CPU */
 	if (!fid) {
 		if (!cpu_khz) {
-			printk(KERN_WARNING
-			       "cpufreq: cpu_khz not set, "
-			       "can't calculate multiplier!\n");
+			printk(KERN_WARNING PFX
+			"cpu_khz not set, can't calculate multiplier!\n");
 			return -ENODEV;
 		}
 
@@ -346,7 +346,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 		}
 	}
 
-	printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb,
+	printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb,
 	       fid / 10, fid % 10);
 
 	/* Set maximum FSB to FSB at boot time */
@@ -402,10 +402,10 @@ static unsigned int nforce2_detect_chipset(void)
 	if (nforce2_dev == NULL)
 		return -ENODEV;
 
-	printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n",
+	printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n",
 	       nforce2_dev->revision);
-	printk(KERN_INFO
-	       "cpufreq: FSB changing is maybe unstable and can lead to "
+	printk(KERN_INFO PFX
+	       "FSB changing is maybe unstable and can lead to "
 	       "crashes and data loss.\n");
 
 	return 0;
@@ -424,7 +424,7 @@ static int __init nforce2_init(void)
 
 	/* detect chipset */
 	if (nforce2_detect_chipset()) {
-		printk(KERN_ERR "cpufreq: No nForce2 chipset.\n");
+		printk(KERN_ERR PFX "No nForce2 chipset.\n");
 		return -ENODEV;
 	}