Commit 20d0e152 authored by Jon Smirl's avatar Jon Smirl Committed by Mark Brown

ASoC: AC97 driver for mpc5200

I've implemented retries for when the AC97 hardware doesn't reset on
first try. About 10% of the time both the Efika and pcm030 AC97 codecs
don't reset on first try and need to be poked multiple times.  Failure
is indicated by not having the link clock start ticking. Every once in
a while even five pokes won't get the link started and I have to power
cycle.
Signed-off-by: default avatarJon Smirl <jonsmirl@gmail.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent dbcc3475
...@@ -29,3 +29,14 @@ config SND_SOC_MPC5200_I2S ...@@ -29,3 +29,14 @@ config SND_SOC_MPC5200_I2S
select PPC_BESTCOMM_GEN_BD select PPC_BESTCOMM_GEN_BD
help help
Say Y here to support the MPC5200 PSCs in I2S mode. Say Y here to support the MPC5200 PSCs in I2S mode.
config SND_SOC_MPC5200_AC97
tristate "Freescale MPC5200 PSC in AC97 mode driver"
depends on PPC_MPC52xx && PPC_BESTCOMM
select AC97_BUS
select SND_MPC52xx_DMA
select PPC_BESTCOMM_GEN_BD
help
Say Y here to support the MPC5200 PSCs in AC97 mode.
...@@ -13,4 +13,5 @@ obj-$(CONFIG_SND_SOC_MPC8610) += snd-soc-fsl-ssi.o snd-soc-fsl-dma.o ...@@ -13,4 +13,5 @@ obj-$(CONFIG_SND_SOC_MPC8610) += snd-soc-fsl-ssi.o snd-soc-fsl-dma.o
# MPC5200 Platform Support # MPC5200 Platform Support
obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o
obj-$(CONFIG_SND_SOC_MPC5200_I2S) += mpc5200_psc_i2s.o obj-$(CONFIG_SND_SOC_MPC5200_I2S) += mpc5200_psc_i2s.o
obj-$(CONFIG_SND_SOC_MPC5200_AC97) += mpc5200_psc_ac97.o
/*
* linux/sound/mpc5200-ac97.c -- AC97 support for the Freescale MPC52xx chip.
*
* Copyright (C) 2009 Jon Smirl, Digispeaker
* Author: Jon Smirl <jonsmirl@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <asm/time.h>
#include <asm/delay.h>
#include <asm/mpc52xx_psc.h>
#include "mpc5200_dma.h"
#include "mpc5200_psc_ac97.h"
#define DRV_NAME "mpc5200-psc-ac97"
/* ALSA only supports a single AC97 device so static is recommend here */
static struct psc_dma *psc_dma;
static unsigned short psc_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
{
int rc;
unsigned int val;
/* Wait for command send status zero = ready */
spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
MPC52xx_PSC_SR_CMDSEND), 100, 0, rc);
if (rc == 0) {
pr_err("timeout on ac97 bus (rdy)\n");
return -ENODEV;
}
/* Send the read */
out_be32(&psc_dma->psc_regs->ac97_cmd, (1<<31) | ((reg & 0x7f) << 24));
/* Wait for the answer */
spin_event_timeout((in_be16(&psc_dma->psc_regs->sr_csr.status) &
MPC52xx_PSC_SR_DATA_VAL), 100, 0, rc);
if (rc == 0) {
pr_err("timeout on ac97 read (val) %x\n",
in_be16(&psc_dma->psc_regs->sr_csr.status));
return -ENODEV;
}
/* Get the data */
val = in_be32(&psc_dma->psc_regs->ac97_data);
if (((val >> 24) & 0x7f) != reg) {
pr_err("reg echo error on ac97 read\n");
return -ENODEV;
}
val = (val >> 8) & 0xffff;
return (unsigned short) val;
}
static void psc_ac97_write(struct snd_ac97 *ac97,
unsigned short reg, unsigned short val)
{
int rc;
/* Wait for command status zero = ready */
spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
MPC52xx_PSC_SR_CMDSEND), 100, 0, rc);
if (rc == 0) {
pr_err("timeout on ac97 bus (write)\n");
return;
}
/* Write data */
out_be32(&psc_dma->psc_regs->ac97_cmd,
((reg & 0x7f) << 24) | (val << 8));
}
static void psc_ac97_warm_reset(struct snd_ac97 *ac97)
{
int rc;
struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
out_be32(&regs->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_AWR);
spin_event_timeout(0, 3, 0, rc);
out_be32(&regs->sicr, psc_dma->sicr);
}
static void psc_ac97_cold_reset(struct snd_ac97 *ac97)
{
int rc;
struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
/* Do a cold reset */
out_8(&regs->op1, MPC52xx_PSC_OP_RES);
spin_event_timeout(0, 10, 0, rc);
out_8(&regs->op0, MPC52xx_PSC_OP_RES);
spin_event_timeout(0, 50, 0, rc);
psc_ac97_warm_reset(ac97);
}
struct snd_ac97_bus_ops soc_ac97_ops = {
.read = psc_ac97_read,
.write = psc_ac97_write,
.reset = psc_ac97_cold_reset,
.warm_reset = psc_ac97_warm_reset,
};
EXPORT_SYMBOL_GPL(soc_ac97_ops);
static int psc_ac97_hw_analog_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *cpu_dai)
{
struct psc_dma *psc_dma = cpu_dai->private_data;
dev_dbg(psc_dma->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
" periods=%i buffer_size=%i buffer_bytes=%i channels=%i"
" rate=%i format=%i\n",
__func__, substream, params_period_size(params),
params_period_bytes(params), params_periods(params),
params_buffer_size(params), params_buffer_bytes(params),
params_channels(params), params_rate(params),
params_format(params));
if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
if (params_channels(params) == 1)
psc_dma->slots |= 0x00000100;
else
psc_dma->slots |= 0x00000300;
} else {
if (params_channels(params) == 1)
psc_dma->slots |= 0x01000000;
else
psc_dma->slots |= 0x03000000;
}
out_be32(&psc_dma->psc_regs->ac97_slots, psc_dma->slots);
return 0;
}
static int psc_ac97_hw_digital_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *cpu_dai)
{
struct psc_dma *psc_dma = cpu_dai->private_data;
if (params_channels(params) == 1)
out_be32(&psc_dma->psc_regs->ac97_slots, 0x01000000);
else
out_be32(&psc_dma->psc_regs->ac97_slots, 0x03000000);
return 0;
}
static int psc_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
switch (cmd) {
case SNDRV_PCM_TRIGGER_STOP:
if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
psc_dma->slots &= 0xFFFF0000;
else
psc_dma->slots &= 0x0000FFFF;
out_be32(&psc_dma->psc_regs->ac97_slots, psc_dma->slots);
break;
}
return 0;
}
static int psc_ac97_probe(struct platform_device *pdev,
struct snd_soc_dai *cpu_dai)
{
struct psc_dma *psc_dma = cpu_dai->private_data;
struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
/* Go */
out_8(&regs->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
return 0;
}
/* ---------------------------------------------------------------------
* ALSA SoC Bindings
*
* - Digital Audio Interface (DAI) template
* - create/destroy dai hooks
*/
/**
* psc_ac97_dai_template: template CPU Digital Audio Interface
*/
static struct snd_soc_dai_ops psc_ac97_analog_ops = {
.hw_params = psc_ac97_hw_analog_params,
.trigger = psc_ac97_trigger,
};
static struct snd_soc_dai_ops psc_ac97_digital_ops = {
.hw_params = psc_ac97_hw_digital_params,
};
struct snd_soc_dai psc_ac97_dai[] = {
{
.name = "AC97",
.ac97_control = 1,
.probe = psc_ac97_probe,
.playback = {
.channels_min = 1,
.channels_max = 6,
.rates = SNDRV_PCM_RATE_8000_48000,
.formats = SNDRV_PCM_FMTBIT_S32_BE,
},
.capture = {
.channels_min = 1,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_48000,
.formats = SNDRV_PCM_FMTBIT_S32_BE,
},
.ops = &psc_ac97_analog_ops,
},
{
.name = "SPDIF",
.ac97_control = 1,
.playback = {
.channels_min = 1,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_32000 | \
SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_BE,
},
.ops = &psc_ac97_digital_ops,
} };
EXPORT_SYMBOL_GPL(psc_ac97_dai);
/* ---------------------------------------------------------------------
* OF platform bus binding code:
* - Probe/remove operations
* - OF device match table
*/
static int __devinit psc_ac97_of_probe(struct of_device *op,
const struct of_device_id *match)
{
int rc, i;
struct snd_ac97 ac97;
struct mpc52xx_psc __iomem *regs;
rc = mpc5200_audio_dma_create(op);
if (rc != 0)
return rc;
for (i = 0; i < ARRAY_SIZE(psc_ac97_dai); i++)
psc_ac97_dai[i].dev = &op->dev;
rc = snd_soc_register_dais(psc_ac97_dai, ARRAY_SIZE(psc_ac97_dai));
if (rc != 0) {
dev_err(&op->dev, "Failed to register DAI\n");
return rc;
}
psc_dma = dev_get_drvdata(&op->dev);
regs = psc_dma->psc_regs;
ac97.private_data = psc_dma;
for (i = 0; i < ARRAY_SIZE(psc_ac97_dai); i++)
psc_ac97_dai[i].private_data = psc_dma;
psc_dma->imr = 0;
out_be16(&psc_dma->psc_regs->isr_imr.imr, psc_dma->imr);
/* Configure the serial interface mode to AC97 */
psc_dma->sicr = MPC52xx_PSC_SICR_SIM_AC97 | MPC52xx_PSC_SICR_ENAC97;
out_be32(&regs->sicr, psc_dma->sicr);
/* No slots active */
out_be32(&regs->ac97_slots, 0x00000000);
return 0;
}
static int __devexit psc_ac97_of_remove(struct of_device *op)
{
return mpc5200_audio_dma_destroy(op);
}
/* Match table for of_platform binding */
static struct of_device_id psc_ac97_match[] __devinitdata = {
{ .compatible = "fsl,mpc5200-psc-ac97", },
{ .compatible = "fsl,mpc5200b-psc-ac97", },
{}
};
MODULE_DEVICE_TABLE(of, psc_ac97_match);
static struct of_platform_driver psc_ac97_driver = {
.match_table = psc_ac97_match,
.probe = psc_ac97_of_probe,
.remove = __devexit_p(psc_ac97_of_remove),
.driver = {
.name = "mpc5200-psc-ac97",
.owner = THIS_MODULE,
},
};
/* ---------------------------------------------------------------------
* Module setup and teardown; simply register the of_platform driver
* for the PSC in AC97 mode.
*/
static int __init psc_ac97_init(void)
{
return of_register_platform_driver(&psc_ac97_driver);
}
module_init(psc_ac97_init);
static void __exit psc_ac97_exit(void)
{
of_unregister_platform_driver(&psc_ac97_driver);
}
module_exit(psc_ac97_exit);
MODULE_AUTHOR("Jon Smirl <jonsmirl@gmail.com>");
MODULE_DESCRIPTION("mpc5200 AC97 module");
MODULE_LICENSE("GPL");
/*
* Freescale MPC5200 PSC in AC97 mode
* ALSA SoC Digital Audio Interface (DAI) driver
*
*/
#ifndef __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__
#define __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__
extern struct snd_soc_dai psc_ac97_dai[];
#define MPC5200_AC97_NORMAL 0
#define MPC5200_AC97_SPDIF 1
#endif /* __SOUND_SOC_FSL_MPC52xx_PSC_AC97_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment