Merge tag 'stm32-dt-for-v5.2-1' of...

Merge tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.2, round 1

Highlights:
----------

MPU part:
 - Add initial support of stm32mp157a-dk1 board:
   This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
   and 512MB of DDR3. Several connections are available on this boards:
   4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ...

 - Add initial support of stm32mp157c-dk2 board:
   This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c SOC
   with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections
   than stm32mp157a-dk1 board are available. Display panel (otm8009a) and
   Murata wifi/BT combo is added.

 - Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and
   on stm32mp157a-dk1/dk2 boards.

 - Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and
   on stm32mp157a-dk1/dk2 boards.

 - Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and
   on stm32mp157a-dk1/dk2 boards.

 - Add sysconfig clock support on stm32mp157c.
 - Add romem and temperature calibration support on stm32mp157c.
 - Add SPDIFRX support on stm32mp157c.
 - Enable CEC on stm32mp157a-dk1/dk2.

MCU part:
 - Add and enable SD card support (MMCI variant) on stm32h743 eval and disco
   boards.
 - Add romem and temperature calibration support on stm32f429
   (and so stm32f469).
 - Enable stm32f769 clock driver

* tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
  ARM: dts: stm32: enable cec on stm32mp157a-dk1 board
  ARM: dts: stm32: add cec pins muxing on stm32mp157
  ARM: dts: stm32: add ltdc pins muxing on stm32mp157
  ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157
  ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2
  ARM: dts: stm32: Enable STM32F769 clock driver
  ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 board
  ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board
  ARM: dts: stm32: add spdfirx pins to stm32mp157c
  ARM: dts: stm32: add spdifrx support on stm32mp157c
  ARM: dts: stm32: Add romem and temperature calibration on stm32f429
  ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c
  ARM: dts: stm32: Add clock on stm32mp157c syscfg
  ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1
  ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1
  ARM: dts: stm32: add IPCC mailbox support on STM32MP157c
  ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 board
  ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 board
  ARM: dts: stm32: add sdmmc1 support on stm32mp157c
  ARM: dts: stm32: add sdmmc1 support on stm32h743i disco board
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -965,6 +965,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32746g-eval.dtb \
 	stm32h743i-eval.dtb \
 	stm32h743i-disco.dtb \
+	stm32mp157a-dk1.dtb \
+	stm32mp157c-dk2.dtb \
 	stm32mp157c-ed1.dtb \
 	stm32mp157c-ev1.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \

arch/arm/boot/dts/stm32f429.dtsi

@@ -80,6 +80,19 @@ clk_i2s_ckin: i2s-ckin {
 	};
 
 	soc {
+		romem: nvmem@1fff7800 {
+			compatible = "st,stm32f4-otp";
+			reg = <0x1fff7800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_cal1: calib@22c {
+				reg = <0x22c 0x2>;
+			};
+			ts_cal2: calib@22e {
+				reg = <0x22e 0x2>;
+			};
+		};
+
 		timer2: timer@40000000 {
 			compatible = "st,stm32-timer";
 			reg = <0x40000000 0x400>;

arch/arm/boot/dts/stm32f769-disco.dts

@@ -102,6 +102,10 @@ mmc_vcard: mmc_vcard {
 	};
 };
 
+&rcc {
+	compatible = "st,stm32f769-rcc", "st,stm32f746-rcc", "st,stm32-rcc";
+};
+
 &cec {
 	pinctrl-0 = <&cec_pins_a>;
 	pinctrl-names = "default";

arch/arm/boot/dts/stm32h743-pinctrl.dtsi

@@ -188,6 +188,74 @@ pins {
 				};
 			};
 
+			sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-disable;
+				};
+			};
+
+			sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+						 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-disable;
+				};
+				pins2{
+					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+					slew-rate = <3>;
+					drive-open-drain;
+					bias-disable;
+				};
+			};
+
+			sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+						 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+						 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+						 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+						 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+						 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+				};
+			};
+
+			sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
+						 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+						 <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+				pins2{
+					pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
+					bias-pull-up;
+				};
+			};
+
+			sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
+						 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+						 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+						 <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
+				};
+			};
+
 			usart1_pins: usart1@0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */

arch/arm/boot/dts/stm32h743.dtsi

@@ -339,6 +339,20 @@ mdma1: dma@52000000 {
 			dma-requests = <32>;
 		};
 
+		sdmmc1: sdmmc@52007000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x52007000 0x1000>;
+			interrupts = <49>;
+			interrupt-names	= "cmd_irq";
+			clocks = <&rcc SDMMC1_CK>;
+			clock-names = "apb_pclk";
+			resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+		};
+
 		exti: interrupt-controller@58000000 {
 			compatible = "st,stm32h7-exti";
 			interrupt-controller;

arch/arm/boot/dts/stm32h743i-disco.dts

@@ -61,6 +61,14 @@ memory {
 	aliases {
 		serial0 = &usart2;
 	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &clk_hse {
@@ -84,6 +92,18 @@ phy0: ethernet-phy@0 {
 	};
 };
 
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
 &usart2 {
 	pinctrl-0 = <&usart2_pins>;
 	pinctrl-names = "default";

arch/arm/boot/dts/stm32h743i-eval.dts

@@ -70,13 +70,20 @@ vdda: regulator-vdda {
 		regulator-always-on;
 	};
 
+	v2v9_sd: regulator-v2v9_sd {
+		compatible = "regulator-fixed";
+		regulator-name = "v2v9_sd";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-always-on;
+	};
+
 	usbotg_hs_phy: usb-phy {
 		#phy-cells = <0>;
 		compatible = "usb-nop-xceiv";
 		clocks = <&rcc USB1ULPI_CK>;
 		clock-names = "main_clk";
 	};
-
 };
 
 &adc_12 {
@@ -122,6 +129,20 @@ phy0: ethernet-phy@0 {
 	};
 };
 
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+	broken-cd;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&v2v9_sd>;
+	status = "okay";
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins>;
 	pinctrl-names = "default";

arch/arm/boot/dts/stm32mp157a-dk1.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c.dtsi"
+#include "stm32mp157-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
+	compatible = "st,stm32mp157a-dk1", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	led {
+		compatible = "gpio-leds";
+		blue {
+			label = "heartbeat";
+			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+};
+
+&cec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cec_pins_b>;
+	pinctrl-1 = <&cec_pins_sleep_b>;
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v2_hdmi: ldo6 {
+				regulator-name = "v1v2_hdmi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			 bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			 };
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge;
+			 };
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};

arch/arm/boot/dts/stm32mp157c-dk2.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157a-dk1.dts"
+
+/ {
+	model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
+	compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
+
+	reg18: reg18 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	phy-dsi-supply = <&reg18>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep1_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>;
+		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+		power-supply = <&v3v3>;
+		status = "okay";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep1_out: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};

arch/arm/boot/dts/stm32mp157c-ed1.dts

@@ -7,6 +7,8 @@
 
 #include "stm32mp157c.dtsi"
 #include "stm32mp157-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
 
 / {
 	model = "STMicroelectronics STM32MP157C eval daughter";
@@ -41,12 +43,17 @@ reg18: reg18 {
 		regulator-always-on;
 	};
 
-	vdd_usb: vdd-usb {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_usb";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
 		regulator-always-on;
+
+		gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1 2900000 0x0>;
 	};
 };
 
@@ -60,6 +67,149 @@ &i2c4 {
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
 	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vdda: ldo1 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v2v8: ldo2 {
+				regulator-name = "v2v8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge;
+			 };
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
 };
 
 &iwdg2 {
@@ -75,6 +225,21 @@ &rtc {
 	status = "okay";
 };
 
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+	broken-cd;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
+	status = "okay";
+};
+
 &timers6 {
 	status = "okay";
 	/* spare dmas for other usage */

arch/arm/boot/dts/stm32mp157c.dtsi

@@ -379,6 +379,19 @@ spi3: spi@4000c000 {
 			status = "disabled";
 		};
 
+		spdifrx: audio-controller@4000d000 {
+			compatible = "st,stm32h7-spdifrx";
+			#sound-dai-cells = <0>;
+			reg = <0x4000d000 0x400>;
+			clocks = <&rcc SPDIF_K>;
+			clock-names = "kclk";
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 93 0x400 0x01>,
+			       <&dmamux1 94 0x400 0x01>;
+			dma-names = "rx", "rx-ctrl";
+			status = "disabled";
+		};
+
 		usart2: serial@4000e000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x4000e000 0x400>;
@@ -886,6 +899,21 @@ usbotg_hs: usb-otg@49000000 {
 			status = "disabled";
 		};
 
+		ipcc: mailbox@4c001000 {
+			compatible = "st,stm32mp1-ipcc";
+			#mbox-cells = <1>;
+			reg = <0x4c001000 0x400>;
+			st,proc-id = <0>;
+			interrupts-extended =
+				<&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				<&exti 61 1>;
+			interrupt-names = "rx", "tx", "wakeup";
+			clocks = <&rcc IPCC>;
+			wakeup-source;
+			status = "disabled";
+		};
+
 		rcc: rcc@50000000 {
 			compatible = "st,stm32mp1-rcc", "syscon";
 			reg = <0x50000000 0x1000>;
@@ -903,6 +931,7 @@ exti: interrupt-controller@5000d000 {
 		syscfg: syscon@50020000 {
 			compatible = "st,stm32mp157-syscfg", "syscon";
 			reg = <0x50020000 0x400>;
+			clocks = <&rcc SYSCFG>;
 		};
 
 		lptimer2: timer@50021000 {
@@ -1050,6 +1079,20 @@ qspi: spi@58003000 {
 			status = "disabled";
 		};
 
+		sdmmc1: sdmmc@58005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x58005000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "cmd_irq";
+			clocks = <&rcc SDMMC1_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC1_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+		};
+
 		crc1: crc@58009000 {
 			compatible = "st,stm32f7-crc";
 			reg = <0x58009000 0x400>;
@@ -1199,6 +1242,19 @@ rtc: rtc@5c004000 {
 			status = "disabled";
 		};
 
+		bsec: nvmem@5c005000 {
+			compatible = "st,stm32mp15-bsec";
+			reg = <0x5c005000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_cal1: calib@5c {
+				reg = <0x5c 0x2>;
+			};
+			ts_cal2: calib@5e {
+				reg = <0x5e 0x2>;
+			};
+		};
+
 		i2c6: i2c@5c009000 {
 			compatible = "st,stm32f7-i2c";
 			reg = <0x5c009000 0x400>;