usb: dwc3: set SUSPHY bit for all cores

It is recommended to set USB3 and USB2 SUSPHY bits to '1' after the core
initialization is completed above the dwc3 revision 1.94a.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/dwc3/core.c

@@ -374,6 +374,15 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
 
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
 
+	/*
+	 * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY
+	 * to '0' during coreConsultant configuration. So default value
+	 * will be '0' when the core is reset. Application needs to set it
+	 * to '1' after the core initialization is completed.
+	 */
+	if (dwc->revision > DWC3_REVISION_194A)
+		reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+
 	if (dwc->u2ss_inp3_quirk)
 		reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK;
 
@@ -395,6 +404,21 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
 	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
 
 	mdelay(100);
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+
+	/*
+	 * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
+	 * '0' during coreConsultant configuration. So default value will
+	 * be '0' when the core is reset. Application needs to set it to
+	 * '1' after the core initialization is completed.
+	 */
+	if (dwc->revision > DWC3_REVISION_194A)
+		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+	mdelay(100);
 }
 
 /**