Skip to content

L
linux
Commit 21c29de1 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab
Browse files
Options

[media] v4l2-subdev.h: Improve documentation 

This header were poorly documented, and weren't using the
kernel-doc format. Document everything but the macros using
the right format.

While here, also fix the other comments to match the
Linux CodingStyle.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 840b14d9
Show whitespace changes
Inline Side-by-side
Showing with 383 additions and 199 deletions
drivers/media/v4l2-core/v4l2-subdev.c
View file @ 21c29de1
......@@ -621,16 +621,6 @@ void v4l2_subdev_init(struct v4l2_subdev *sd, const struct v4l2_subdev_ops *ops)
}
EXPORT_SYMBOL(v4l2_subdev_init);
/**
* v4l2_subdev_notify_event() - Delivers event notification for subdevice
* @sd: The subdev for which to deliver the event
* @ev: The event to deliver
*
* Will deliver the specified event to all userspace event listeners which are
* subscribed to the v42l subdev event queue as well as to the bridge driver
* using the notify callback. The notification type for the notify callback
* will be V4L2_DEVICE_NOTIFY_EVENT.
*/
void v4l2_subdev_notify_event(struct v4l2_subdev *sd,
const struct v4l2_event *ev)
{
......
include/media/v4l2-subdev.h
View file @ 21c29de1
/*
V4L2 sub-device support header.
Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
* V4L2 sub-device support header.
*
* Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _V4L2_SUBDEV_H
......@@ -52,55 +48,64 @@ struct v4l2_subdev_fh;
struct tuner_setup;
struct v4l2_mbus_frame_desc;
/* decode_vbi_line */
/**
* struct v4l2_decode_vbi_line - used to decode_vbi_line
*
* @is_second_field: Set to 0 for the first (odd) field;
* set to 1 for the second (even) field.
* @p: Pointer to the sliced VBI data from the decoder. On exit, points to
* the start of the payload.
* @line: Line number of the sliced VBI data (1-23)
* @type: VBI service type (V4L2_SLICED_*). 0 if no service found
*/
struct v4l2_decode_vbi_line {
u32 is_second_field; /* Set to 0 for the first (odd) field,
set to 1 for the second (even) field. */
u8 *p; /* Pointer to the sliced VBI data from the decoder.
On exit points to the start of the payload. */
u32 line; /* Line number of the sliced VBI data (1-23) */
u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */
u32 is_second_field;
u8 *p;
u32 line;
u32 type;
};
/* Sub-devices are devices that are connected somehow to the main bridge
device. These devices are usually audio/video muxers/encoders/decoders or
sensors and webcam controllers.
Usually these devices are controlled through an i2c bus, but other busses
may also be used.
The v4l2_subdev struct provides a way of accessing these devices in a
generic manner. Most operations that these sub-devices support fall in
a few categories: core ops, audio ops, video ops and tuner ops.
More categories can be added if needed, although this should remain a
limited set (no more than approx. 8 categories).
Each category has its own set of ops that subdev drivers can implement.
A subdev driver can leave the pointer to the category ops NULL if
it does not implement them (e.g. an audio subdev will generally not
implement the video category ops). The exception is the core category:
this must always be present.
These ops are all used internally so it is no problem to change, remove
or add ops or move ops from one to another category. Currently these
ops are based on the original ioctls, but since ops are not limited to
one argument there is room for improvement here once all i2c subdev
drivers are converted to use these ops.
/*
* Sub-devices are devices that are connected somehow to the main bridge
* device. These devices are usually audio/video muxers/encoders/decoders or
* sensors and webcam controllers.
*
* Usually these devices are controlled through an i2c bus, but other busses
* may also be used.
*
* The v4l2_subdev struct provides a way of accessing these devices in a
* generic manner. Most operations that these sub-devices support fall in
* a few categories: core ops, audio ops, video ops and tuner ops.
*
* More categories can be added if needed, although this should remain a
* limited set (no more than approx. 8 categories).
*
* Each category has its own set of ops that subdev drivers can implement.
*
* A subdev driver can leave the pointer to the category ops NULL if
* it does not implement them (e.g. an audio subdev will generally not
* implement the video category ops). The exception is the core category:
* this must always be present.
*
* These ops are all used internally so it is no problem to change, remove
* or add ops or move ops from one to another category. Currently these
* ops are based on the original ioctls, but since ops are not limited to
* one argument there is room for improvement here once all i2c subdev
* drivers are converted to use these ops.
*/
/* Core ops: it is highly recommended to implement at least these ops:
log_status
g_register
s_register
This provides basic debugging support.
The ioctl ops is meant for generic ioctl-like commands. Depending on
the use-case it might be better to use subdev-specific ops (currently
not yet implemented) since ops provide proper type-checking.
/*
* Core ops: it is highly recommended to implement at least these ops:
*
* log_status
* g_register
* s_register
*
* This provides basic debugging support.
*
* The ioctl ops is meant for generic ioctl-like commands. Depending on
* the use-case it might be better to use subdev-specific ops (currently
* not yet implemented) since ops provide proper type-checking.
*/
/* Subdevice external IO pin configuration */
......@@ -110,18 +115,32 @@ struct v4l2_decode_vbi_line {
#define V4L2_SUBDEV_IO_PIN_SET_VALUE (1 << 3) /* Set output value */
#define V4L2_SUBDEV_IO_PIN_ACTIVE_LOW (1 << 4) /* ACTIVE HIGH assumed */
/**
* struct v4l2_subdev_io_pin_config - Subdevice external IO pin configuration
*
* @flags: bitmask with flags for this pin's config:
* %V4L2_SUBDEV_IO_PIN_DISABLE - disables a pin config,
* %V4L2_SUBDEV_IO_PIN_OUTPUT - if pin is an output,
* %V4L2_SUBDEV_IO_PIN_INPUT - if pin is an input,
* %V4L2_SUBDEV_IO_PIN_SET_VALUE - to set the output value via @value
* and %V4L2_SUBDEV_IO_PIN_ACTIVE_LOW - if active is 0.
* @pin: Chip external IO pin to configure
* @function: Internal signal pad/function to route to IO pin
* @value: Initial value for pin - e.g. GPIO output value
* @strength: Pin drive strength
*/
struct v4l2_subdev_io_pin_config {
u32 flags; /* V4L2_SUBDEV_IO_PIN_* flags for this pin's config */
u8 pin; /* Chip external IO pin to configure */
u8 function; /* Internal signal pad/function to route to IO pin */
u8 value; /* Initial value for pin - e.g. GPIO output value */
u8 strength; /* Pin drive strength */
u32 flags;
u8 pin;
u8 function;
u8 value;
u8 strength;
};
/**
* struct v4l2_subdev_core_ops - Define core ops callbacks for subdevs
*
* @log_status: callback for VIDIOC_LOG_STATUS ioctl handler code.
* @log_status: callback for %VIDIOC_LOG_STATUS ioctl handler code.
*
* @s_io_pin_config: configure one or more chip I/O pins for chips that
* multiplex different internal signal pads out to IO pins. This function
......@@ -149,9 +168,9 @@ struct v4l2_subdev_io_pin_config {
* @compat_ioctl32: called when a 32 bits application uses a 64 bits Kernel,
* in order to fix data passed from/to userspace.
*
* @g_register: callback for VIDIOC_G_REGISTER ioctl handler code.
* @g_register: callback for %VIDIOC_G_REGISTER ioctl handler code.
*
* @s_register: callback for VIDIOC_G_REGISTER ioctl handler code.
* @s_register: callback for %VIDIOC_G_REGISTER ioctl handler code.
*
* @s_power: puts subdevice in power saving mode (on == 0) or normal operation
* mode (on == 1).
......@@ -159,7 +178,7 @@ struct v4l2_subdev_io_pin_config {
* @interrupt_service_routine: Called by the bridge chip's interrupt service
* handler, when an interrupt status has be raised due to this subdev,
* so that this subdev can handle the details. It may schedule work to be
* performed later. It must not sleep. *Called from an IRQ context*.
* performed later. It must not sleep. **Called from an IRQ context**.
*
* @subscribe_event: used by the drivers to request the control framework that
* for it to be warned when the value of a control changes.
......@@ -198,25 +217,25 @@ struct v4l2_subdev_core_ops {
/**
* struct s_radio - Callbacks used when v4l device was opened in radio mode.
*
* @s_radio: callback for VIDIOC_S_RADIO ioctl handler code.
* @s_radio: callback for %VIDIOC_S_RADIO ioctl handler code.
*
* @s_frequency: callback for VIDIOC_S_FREQUENCY ioctl handler code.
* @s_frequency: callback for %VIDIOC_S_FREQUENCY ioctl handler code.
*
* @g_frequency: callback for VIDIOC_G_FREQUENCY ioctl handler code.
* freq->type must be filled in. Normally done by video_ioctl2
* @g_frequency: callback for %VIDIOC_G_FREQUENCY ioctl handler code.
* freq->type must be filled in. Normally done by video_ioctl2()
* or the bridge driver.
*
* @enum_freq_bands: callback for VIDIOC_ENUM_FREQ_BANDS ioctl handler code.
* @enum_freq_bands: callback for %VIDIOC_ENUM_FREQ_BANDS ioctl handler code.
*
* @g_tuner: callback for VIDIOC_G_TUNER ioctl handler code.
* @g_tuner: callback for %VIDIOC_G_TUNER ioctl handler code.
*
* @s_tuner: callback for VIDIOC_S_TUNER ioctl handler code. vt->type must be
* @s_tuner: callback for %VIDIOC_S_TUNER ioctl handler code. &vt->type must be
* filled in. Normally done by video_ioctl2 or the
* bridge driver.
*
* @g_modulator: callback for VIDIOC_G_MODULATOR ioctl handler code.
* @g_modulator: callback for %VIDIOC_G_MODULATOR ioctl handler code.
*
* @s_modulator: callback for VIDIOC_S_MODULATOR ioctl handler code.
* @s_modulator: callback for %VIDIOC_S_MODULATOR ioctl handler code.
*
* @s_type_addr: sets tuner type and its I2C addr.
*
......@@ -247,7 +266,7 @@ struct v4l2_subdev_tuner_ops {
* @s_i2s_clock_freq: sets I2S speed in bps. This is used to provide a standard
* way to select I2S clock used by driving digital audio streams at some
* board designs. Usual values for the frequency are 1024000 and 2048000.
* If the frequency is not supported, then -EINVAL is returned.
* If the frequency is not supported, then %-EINVAL is returned.
*
* @s_routing: used to define the input and/or output pins of an audio chip,
* and any additional configuration data.
......@@ -279,7 +298,8 @@ struct v4l2_subdev_audio_ops {
/**
* struct v4l2_mbus_frame_desc_entry - media bus frame description structure
*
* @flags: V4L2_MBUS_FRAME_DESC_FL_* flags
* @flags: bitmask flags: %V4L2_MBUS_FRAME_DESC_FL_LEN_MAX and
* %V4L2_MBUS_FRAME_DESC_FL_BLOB.
* @pixelcode: media bus pixel code, valid if FRAME_DESC_FL_BLOB is not set
* @length: number of octets per frame, valid if V4L2_MBUS_FRAME_DESC_FL_BLOB
* is set
......@@ -314,9 +334,9 @@ struct v4l2_mbus_frame_desc {
* regarding clock frequency dividers, etc. If not used, then set flags
* to 0. If the frequency is not supported, then -EINVAL is returned.
*
* @g_std: callback for VIDIOC_G_STD ioctl handler code.
* @g_std: callback for %VIDIOC_G_STD ioctl handler code.
*
* @s_std: callback for VIDIOC_S_STD ioctl handler code.
* @s_std: callback for %VIDIOC_S_STD ioctl handler code.
*
* @s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
* video input devices.
......@@ -324,33 +344,33 @@ struct v4l2_mbus_frame_desc {
* @g_std_output: get current standard for video OUTPUT devices. This is ignored
* by video input devices.
*
* @querystd: callback for VIDIOC_QUERYSTD ioctl handler code.
* @querystd: callback for %VIDIOC_QUERYSTD ioctl handler code.
*
* @g_tvnorms: get v4l2_std_id with all standards supported by the video
* @g_tvnorms: get &v4l2_std_id with all standards supported by the video
* CAPTURE device. This is ignored by video output devices.
*
* @g_tvnorms_output: get v4l2_std_id with all standards supported by the video
* OUTPUT device. This is ignored by video capture devices.
*
* @g_input_status: get input status. Same as the status field in the v4l2_input
* struct.
* @g_input_status: get input status. Same as the status field in the
* &struct &v4l2_input
*
* @s_stream: used to notify the driver that a video stream will start or has
* stopped.
*
* @cropcap: callback for VIDIOC_CROPCAP ioctl handler code.
* @cropcap: callback for %VIDIOC_CROPCAP ioctl handler code.
*
* @g_crop: callback for VIDIOC_G_CROP ioctl handler code.
* @g_crop: callback for %VIDIOC_G_CROP ioctl handler code.
*
* @s_crop: callback for VIDIOC_S_CROP ioctl handler code.
* @s_crop: callback for %VIDIOC_S_CROP ioctl handler code.
*
* @g_parm: callback for VIDIOC_G_PARM ioctl handler code.
* @g_parm: callback for %VIDIOC_G_PARM ioctl handler code.
*
* @s_parm: callback for VIDIOC_S_PARM ioctl handler code.
* @s_parm: callback for %VIDIOC_S_PARM ioctl handler code.
*
* @g_frame_interval: callback for VIDIOC_G_FRAMEINTERVAL ioctl handler code.
* @g_frame_interval: callback for %VIDIOC_G_FRAMEINTERVAL ioctl handler code.
*
* @s_frame_interval: callback for VIDIOC_S_FRAMEINTERVAL ioctl handler code.
* @s_frame_interval: callback for %VIDIOC_S_FRAMEINTERVAL ioctl handler code.
*
* @s_dv_timings: Set custom dv timings in the sub device. This is used
* when sub device is capable of setting detailed timing information
......@@ -358,7 +378,7 @@ struct v4l2_mbus_frame_desc {
*
* @g_dv_timings: Get custom dv timings in the sub device.
*
* @query_dv_timings: callback for VIDIOC_QUERY_DV_TIMINGS ioctl handler code.
* @query_dv_timings: callback for %VIDIOC_QUERY_DV_TIMINGS ioctl handler code.
*
* @g_mbus_config: get supported mediabus configurations
*
......@@ -410,28 +430,28 @@ struct v4l2_subdev_video_ops {
* in video mode via the vbi device node.
*
* @decode_vbi_line: video decoders that support sliced VBI need to implement
* this ioctl. Field p of the v4l2_sliced_vbi_line struct is set to the
* this ioctl. Field p of the &struct v4l2_sliced_vbi_line is set to the
* start of the VBI data that was generated by the decoder. The driver
* then parses the sliced VBI data and sets the other fields in the
* struct accordingly. The pointer p is updated to point to the start of
* the payload which can be copied verbatim into the data field of the
* v4l2_sliced_vbi_data struct. If no valid VBI data was found, then the
* &struct v4l2_sliced_vbi_data. If no valid VBI data was found, then the
* type field is set to 0 on return.
*
* @s_vbi_data: used to generate VBI signals on a video signal.
* v4l2_sliced_vbi_data is filled with the data packets that should be
* output. Note that if you set the line field to 0, then that VBI signal
* is disabled. If no valid VBI data was found, then the type field is
* set to 0 on return.
* &struct v4l2_sliced_vbi_data is filled with the data packets that
* should be output. Note that if you set the line field to 0, then that
* VBI signal is disabled. If no valid VBI data was found, then the type
* field is set to 0 on return.
*
* @g_vbi_data: used to obtain the sliced VBI packet from a readback register.
* Not all video decoders support this. If no data is available because
* the readback register contains invalid or erroneous data -EIO is
* the readback register contains invalid or erroneous data %-EIO is
* returned. Note that you must fill in the 'id' member and the 'field'
* member (to determine whether CC data from the first or second field
* should be obtained).
*
* @g_sliced_vbi_cap: callback for VIDIOC_SLICED_VBI_CAP ioctl handler code.
* @g_sliced_vbi_cap: callback for %VIDIOC_SLICED_VBI_CAP ioctl handler code.
*
* @s_raw_fmt: setup the video encoder/decoder for raw VBI.
*
......@@ -464,58 +484,99 @@ struct v4l2_subdev_sensor_ops {
int (*g_skip_frames)(struct v4l2_subdev *sd, u32 *frames);
};
/*
[rt]x_g_parameters: Get the current operating parameters and state of the
the IR receiver or transmitter.
[rt]x_s_parameters: Set the current operating parameters and state of the
the IR receiver or transmitter. It is recommended to call
[rt]x_g_parameters first to fill out the current state, and only change
the fields that need to be changed. Upon return, the actual device
operating parameters and state will be returned. Note that hardware
limitations may prevent the actual settings from matching the requested
settings - e.g. an actual carrier setting of 35,904 Hz when 36,000 Hz
was requested. An exception is when the shutdown parameter is true.
The last used operational parameters will be returned, but the actual
state of the hardware be different to minimize power consumption and
processing when shutdown is true.
rx_read: Reads received codes or pulse width data.
The semantics are similar to a non-blocking read() call.
tx_write: Writes codes or pulse width data for transmission.
The semantics are similar to a non-blocking write() call.
/**
* enum v4l2_subdev_ir_mode- describes the type of IR supported
*
* @V4L2_SUBDEV_IR_MODE_PULSE_WIDTH: IR uses struct ir_raw_event records
*/
enum v4l2_subdev_ir_mode {
V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, /* uses struct ir_raw_event records */
V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
};
/**
* struct v4l2_subdev_ir_parameters - Parameters for IR TX or TX
*
* @bytes_per_data_element: bytes per data element of data in read or
* write call.
* @mode: IR mode as defined by &enum v4l2_subdev_ir_mode.
* @enable: device is active if true
* @interrupt_enable: IR interrupts are enabled if true
* @shutdown: if true: set hardware to low/no power, false: normal mode
*
* @modulation: if true, it uses carrier, if false: baseband
* @max_pulse_width: maximum pulse width in ns, valid only for baseband signal
* @carrier_freq: carrier frequency in Hz, valid only for modulated signal
* @duty_cycle: duty cycle percentage, valid only for modulated signal
* @invert_level: invert signal level
*
* @invert_carrier_sense: Send 0/space as a carrier burst. used only in TX.
*
* @noise_filter_min_width: min time of a valid pulse, in ns. Used only for RX.
* @carrier_range_lower: Lower carrier range, in Hz, valid only for modulated
* signal. Used only for RX.
* @carrier_range_upper: Upper carrier range, in Hz, valid only for modulated
* signal. Used only for RX.
* @resolution: The receive resolution, in ns . Used only for RX.
*/
struct v4l2_subdev_ir_parameters {
/* Either Rx or Tx */
unsigned int bytes_per_data_element; /* of data in read or write call */
unsigned int bytes_per_data_element;
enum v4l2_subdev_ir_mode mode;
bool enable;
bool interrupt_enable;
bool shutdown; /* true: set hardware to low/no power, false: normal */
bool shutdown;
bool modulation; /* true: uses carrier, false: baseband */
u32 max_pulse_width; /* ns, valid only for baseband signal */
unsigned int carrier_freq; /* Hz, valid only for modulated signal*/
unsigned int duty_cycle; /* percent, valid only for modulated signal*/
bool invert_level; /* invert signal level */
bool modulation;
u32 max_pulse_width;
unsigned int carrier_freq;
unsigned int duty_cycle;
bool invert_level;
/* Tx only */
bool invert_carrier_sense; /* Send 0/space as a carrier burst */
bool invert_carrier_sense;
/* Rx only */
u32 noise_filter_min_width; /* ns, min time of a valid pulse */
unsigned int carrier_range_lower; /* Hz, valid only for modulated sig */
unsigned int carrier_range_upper; /* Hz, valid only for modulated sig */
u32 resolution; /* ns */
u32 noise_filter_min_width;
unsigned int carrier_range_lower;
unsigned int carrier_range_upper;
u32 resolution;
};
/**
* struct v4l2_subdev_ir_ops - operations for IR subdevices
*
* @rx_read: Reads received codes or pulse width data.
* The semantics are similar to a non-blocking read() call.
* @rx_g_parameters: Get the current operating parameters and state of the
* the IR receiver.
* @rx_s_parameters: Set the current operating parameters and state of the
* the IR receiver. It is recommended to call
* [rt]x_g_parameters first to fill out the current state, and only change
* the fields that need to be changed. Upon return, the actual device
* operating parameters and state will be returned. Note that hardware
* limitations may prevent the actual settings from matching the requested
* settings - e.g. an actual carrier setting of 35,904 Hz when 36,000 Hz
* was requested. An exception is when the shutdown parameter is true.
* The last used operational parameters will be returned, but the actual
* state of the hardware be different to minimize power consumption and
* processing when shutdown is true.
*
* @tx_write: Writes codes or pulse width data for transmission.
* The semantics are similar to a non-blocking write() call.
* @tx_g_parameters: Get the current operating parameters and state of the
* the IR transmitter.
* @tx_s_parameters: Set the current operating parameters and state of the
* the IR transmitter. It is recommended to call
* [rt]x_g_parameters first to fill out the current state, and only change
* the fields that need to be changed. Upon return, the actual device
* operating parameters and state will be returned. Note that hardware
* limitations may prevent the actual settings from matching the requested
* settings - e.g. an actual carrier setting of 35,904 Hz when 36,000 Hz
* was requested. An exception is when the shutdown parameter is true.
* The last used operational parameters will be returned, but the actual
* state of the hardware be different to minimize power consumption and
* processing when shutdown is true.
*/
struct v4l2_subdev_ir_ops {
/* Receiver */
int (*rx_read)(struct v4l2_subdev *sd, u8 *buf, size_t count,
......@@ -536,11 +597,16 @@ struct v4l2_subdev_ir_ops {
struct v4l2_subdev_ir_parameters *params);
};
/*
* Used for storing subdev pad information. This structure only needs
* to be passed to the pad op if the 'which' field of the main argument
* is set to V4L2_SUBDEV_FORMAT_TRY. For V4L2_SUBDEV_FORMAT_ACTIVE it is
* safe to pass NULL.
/**
* struct v4l2_subdev_pad_config - Used for storing subdev pad information.
*
* @try_fmt: pointer to &struct v4l2_mbus_framefmt
* @try_crop: pointer to &struct v4l2_rect to be used for crop
* @try_compose: pointer to &struct v4l2_rect to be used for compose
*
* This structure only needs to be passed to the pad op if the 'which' field
* of the main argument is set to %V4L2_SUBDEV_FORMAT_TRY. For
* %V4L2_SUBDEV_FORMAT_ACTIVE it is safe to pass %NULL.
*/
struct v4l2_subdev_pad_config {
struct v4l2_mbus_framefmt try_fmt;
......@@ -552,30 +618,30 @@ struct v4l2_subdev_pad_config {
* struct v4l2_subdev_pad_ops - v4l2-subdev pad level operations
*
* @init_cfg: initialize the pad config to default values
* @enum_mbus_code: callback for VIDIOC_SUBDEV_ENUM_MBUS_CODE ioctl handler
* @enum_mbus_code: callback for %VIDIOC_SUBDEV_ENUM_MBUS_CODE ioctl handler
* code.
* @enum_frame_size: callback for VIDIOC_SUBDEV_ENUM_FRAME_SIZE ioctl handler
* @enum_frame_size: callback for %VIDIOC_SUBDEV_ENUM_FRAME_SIZE ioctl handler
* code.
*
* @enum_frame_interval: callback for VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL ioctl
* @enum_frame_interval: callback for %VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL ioctl
* handler code.
*
* @get_fmt: callback for VIDIOC_SUBDEV_G_FMT ioctl handler code.
* @get_fmt: callback for %VIDIOC_SUBDEV_G_FMT ioctl handler code.
*
* @set_fmt: callback for VIDIOC_SUBDEV_S_FMT ioctl handler code.
* @set_fmt: callback for %VIDIOC_SUBDEV_S_FMT ioctl handler code.
*
* @get_selection: callback for VIDIOC_SUBDEV_G_SELECTION ioctl handler code.
* @get_selection: callback for %VIDIOC_SUBDEV_G_SELECTION ioctl handler code.
*
* @set_selection: callback for VIDIOC_SUBDEV_S_SELECTION ioctl handler code.
* @set_selection: callback for %VIDIOC_SUBDEV_S_SELECTION ioctl handler code.
*
* @get_edid: callback for VIDIOC_SUBDEV_G_EDID ioctl handler code.
* @get_edid: callback for %VIDIOC_SUBDEV_G_EDID ioctl handler code.
*
* @set_edid: callback for VIDIOC_SUBDEV_S_EDID ioctl handler code.
* @set_edid: callback for %VIDIOC_SUBDEV_S_EDID ioctl handler code.
*
* @dv_timings_cap: callback for VIDIOC_SUBDEV_DV_TIMINGS_CAP ioctl handler
* @dv_timings_cap: callback for %VIDIOC_SUBDEV_DV_TIMINGS_CAP ioctl handler
* code.
*
* @enum_dv_timings: callback for VIDIOC_SUBDEV_ENUM_DV_TIMINGS ioctl handler
* @enum_dv_timings: callback for %VIDIOC_SUBDEV_ENUM_DV_TIMINGS ioctl handler
* code.
*
* @link_validate: used by the media controller code to check if the links
......@@ -627,6 +693,18 @@ struct v4l2_subdev_pad_ops {
struct v4l2_mbus_frame_desc *fd);
};
/**
* struct v4l2_subdev_ops - Subdev operations
*
* @core: pointer to &struct v4l2_subdev_core_ops. Can be %NULL
* @tuner: pointer to &struct v4l2_subdev_tuner_ops. Can be %NULL
* @audio: pointer to &struct v4l2_subdev_audio_ops. Can be %NULL
* @video: pointer to &struct v4l2_subdev_video_ops. Can be %NULL
* @vbi: pointer to &struct v4l2_subdev_vbi_ops. Can be %NULL
* @ir: pointer to &struct v4l2_subdev_ir_ops. Can be %NULL
* @sensor: pointer to &struct v4l2_subdev_sensor_ops. Can be %NULL
* @pad: pointer to &struct v4l2_subdev_pad_ops. Can be %NULL
*/
struct v4l2_subdev_ops {
const struct v4l2_subdev_core_ops *core;
const struct v4l2_subdev_tuner_ops *tuner;
......@@ -638,19 +716,22 @@ struct v4l2_subdev_ops {
const struct v4l2_subdev_pad_ops *pad;
};
/*
* Internal ops. Never call this from drivers, only the v4l2 framework can call
* these ops.
/**
* struct v4l2_subdev_internal_ops - V4L2 subdev internal ops
*
* registered: called when this subdev is registered. When called the v4l2_dev
* @registered: called when this subdev is registered. When called the v4l2_dev
* field is set to the correct v4l2_device.
*
* unregistered: called when this subdev is unregistered. When called the
* @unregistered: called when this subdev is unregistered. When called the
* v4l2_dev field is still set to the correct v4l2_device.
*
* open: called when the subdev device node is opened by an application.
* @open: called when the subdev device node is opened by an application.
*
* close: called when the subdev device node is closed.
* @close: called when the subdev device node is closed.
*
* .. note::
* Never call this from drivers, only the v4l2 framework can call
* these ops.
*/
struct v4l2_subdev_internal_ops {
int (*registered)(struct v4l2_subdev *sd);
......@@ -672,17 +753,60 @@ struct v4l2_subdev_internal_ops {
struct regulator_bulk_data;
/**
* struct v4l2_subdev_platform_data - regulators config struct
*
* @regulators: Optional regulators used to power on/off the subdevice
* @num_regulators: Number of regululators
* @host_priv: Per-subdevice data, specific for a certain video host device
*/
struct v4l2_subdev_platform_data {
/* Optional regulators uset to power on/off the subdevice */
struct regulator_bulk_data *regulators;
int num_regulators;
/* Per-subdevice data, specific for a certain video host device */
void *host_priv;
};
/* Each instance of a subdev driver should create this struct, either
stand-alone or embedded in a larger struct.
/**
* struct v4l2_subdev - describes a V4L2 sub-device
*
* @entity: pointer to &struct media_entity
* @list: List of sub-devices
* @owner: The owner is the same as the driver's &struct device owner.
* @owner_v4l2_dev: true if the &sd->owner matches the owner of &v4l2_dev->dev
* ownner. Initialized by v4l2_device_register_subdev().
* @flags: subdev flags. Can be:
* %V4L2_SUBDEV_FL_IS_I2C - Set this flag if this subdev is a i2c device;
* %V4L2_SUBDEV_FL_IS_SPI - Set this flag if this subdev is a spi device;
* %V4L2_SUBDEV_FL_HAS_DEVNODE - Set this flag if this subdev needs a
* device node;
* %V4L2_SUBDEV_FL_HAS_EVENTS - Set this flag if this subdev generates
* events.
*
* @v4l2_dev: pointer to &struct v4l2_device
* @ops: pointer to &struct v4l2_subdev_ops
* @internal_ops: pointer to &struct v4l2_subdev_internal_ops.
* Never call these internal ops from within a driver!
* @ctrl_handler: The control handler of this subdev. May be NULL.
* @name: Name of the sub-device. Please notice that the name must be unique.
* @grp_id: can be used to group similar subdevs. Value is driver-specific
* @dev_priv: pointer to private data
* @host_priv: pointer to private data used by the device where the subdev
* is attached.
* @devnode: subdev device node
* @dev: pointer to the physical device, if any
* @of_node: The device_node of the subdev, usually the same as dev->of_node.
* @async_list: Links this subdev to a global subdev_list or @notifier->done
* list.
* @asd: Pointer to respective &struct v4l2_async_subdev.
* @notifier: Pointer to the managing notifier.
* @pdata: common part of subdevice platform data
*
* Each instance of a subdev driver should create this struct, either
* stand-alone or embedded in a larger struct.
*
* This structure should be initialized by v4l2_subdev_init() or one of
* its variants: v4l2_spi_subdev_init(), v4l2_i2c_subdev_init().
*/
struct v4l2_subdev {
#if defined(CONFIG_MEDIA_CONTROLLER)
......@@ -694,30 +818,18 @@ struct v4l2_subdev {
u32 flags;
struct v4l2_device *v4l2_dev;
const struct v4l2_subdev_ops *ops;
/* Never call these internal ops from within a driver! */
const struct v4l2_subdev_internal_ops *internal_ops;
/* The control handler of this subdev. May be NULL. */
struct v4l2_ctrl_handler *ctrl_handler;
/* name must be unique */
char name[V4L2_SUBDEV_NAME_SIZE];
/* can be used to group similar subdevs, value is driver-specific */
u32 grp_id;
/* pointer to private data */
void *dev_priv;
void *host_priv;
/* subdev device node */
struct video_device *devnode;
/* pointer to the physical device, if any */
struct device *dev;
/* The device_node of the subdev, usually the same as dev->of_node. */
struct device_node *of_node;
/* Links this subdev to a global subdev_list or @notifier->done list. */
struct list_head async_list;
/* Pointer to respective struct v4l2_async_subdev. */
struct v4l2_async_subdev *asd;
/* Pointer to the managing notifier. */
struct v4l2_async_notifier *notifier;
/* common part of subdevice platform data */
struct v4l2_subdev_platform_data *pdata;
};
......@@ -726,8 +838,11 @@ struct v4l2_subdev {
#define vdev_to_v4l2_subdev(vdev) \
((struct v4l2_subdev *)video_get_drvdata(vdev))
/*
* Used for storing subdev information per file handle
/**
* struct v4l2_subdev_fh - Used for storing subdev information per file handle
*
* @vfh: pointer to struct v4l2_fh
* @pad: pointer to v4l2_subdev_pad_config
*/
struct v4l2_subdev_fh {
struct v4l2_fh vfh;
......@@ -757,53 +872,132 @@ __V4L2_SUBDEV_MK_GET_TRY(v4l2_rect, v4l2_subdev_get_try_compose, try_compose)
extern const struct v4l2_file_operations v4l2_subdev_fops;
/**
* v4l2_set_subdevdata - Sets V4L2 dev private device data
*
* @sd: pointer to &struct v4l2_subdev
* @p: pointer to the private device data to be stored.
*/
static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p)
{
sd->dev_priv = p;
}
/**
* v4l2_get_subdevdata - Gets V4L2 dev private device data
*
* @sd: pointer to &struct v4l2_subdev
*
* Returns the pointer to the private device data to be stored.
*/
static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd)
{
return sd->dev_priv;
}
/**
* v4l2_set_subdevdata - Sets V4L2 dev private host data
*
* @sd: pointer to &struct v4l2_subdev
* @p: pointer to the private data to be stored.
*/
static inline void v4l2_set_subdev_hostdata(struct v4l2_subdev *sd, void *p)
{
sd->host_priv = p;
}
/**
* v4l2_get_subdevdata - Gets V4L2 dev private data
*
* @sd: pointer to &struct v4l2_subdev
*
* Returns the pointer to the private host data to be stored.
*/
static inline void *v4l2_get_subdev_hostdata(const struct v4l2_subdev *sd)
{
return sd->host_priv;
}
#ifdef CONFIG_MEDIA_CONTROLLER
/**
* v4l2_subdev_link_validate_default - validates a media link
*
* @sd: pointer to &struct v4l2_subdev
* @link: pointer to &struct media_link
* @source_fmt: pointer to &struct v4l2_subdev_format
* @sink_fmt: pointer to &struct v4l2_subdev_format
*
* This function ensures that width, height and the media bus pixel
* code are equal on both source and sink of the link.
*/
int v4l2_subdev_link_validate_default(struct v4l2_subdev *sd,
struct media_link *link,
struct v4l2_subdev_format *source_fmt,
struct v4l2_subdev_format *sink_fmt);
/**
* v4l2_subdev_link_validate - validates a media link
*
* @link: pointer to &struct media_link
*
* This function calls the subdev's link_validate ops to validate
* if a media link is valid for streaming. It also internally
* calls v4l2_subdev_link_validate_default() to ensure that
* width, height and the media bus pixel code are equal on both
* source and sink of the link.
*/
int v4l2_subdev_link_validate(struct media_link *link);
struct v4l2_subdev_pad_config *
v4l2_subdev_alloc_pad_config(struct v4l2_subdev *sd);
/**
* v4l2_subdev_alloc_pad_config - Allocates memory for pad config
*
* @sd: pointer to struct v4l2_subdev
*/
struct
v4l2_subdev_pad_config *v4l2_subdev_alloc_pad_config(struct v4l2_subdev *sd);
/**
* v4l2_subdev_free_pad_config - Frees memory allocated by
* v4l2_subdev_alloc_pad_config().
*
* @cfg: pointer to &struct v4l2_subdev_pad_config
*/
void v4l2_subdev_free_pad_config(struct v4l2_subdev_pad_config *cfg);
#endif /* CONFIG_MEDIA_CONTROLLER */
/**
* v4l2_subdev_init - initializes the sub-device struct
*
* @sd: pointer to the &struct v4l2_subdev to be initialized
* @ops: pointer to &struct v4l2_subdev_ops.
*/
void v4l2_subdev_init(struct v4l2_subdev *sd,
const struct v4l2_subdev_ops *ops);
/* Call an ops of a v4l2_subdev, doing the right checks against
NULL pointers.
Example: err = v4l2_subdev_call(sd, video, s_std, norm);
/*
* Call an ops of a v4l2_subdev, doing the right checks against
* NULL pointers.
*
* Example: err = v4l2_subdev_call(sd, video, s_std, norm);
*/
#define v4l2_subdev_call(sd, o, f, args...) \
(!(sd) ? -ENODEV : (((sd)->ops->o && (sd)->ops->o->f) ? \
(sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD))
(sd)->ops->o->f((sd), ##args) : -ENOIOCTLCMD))
#define v4l2_subdev_has_op(sd, o, f) \
((sd)->ops->o && (sd)->ops->o->f)
/**
* v4l2_subdev_notify_event() - Delivers event notification for subdevice
* @sd: The subdev for which to deliver the event
* @ev: The event to deliver
*
* Will deliver the specified event to all userspace event listeners which are
* subscribed to the v42l subdev event queue as well as to the bridge driver
* using the notify callback. The notification type for the notify callback
* will be %V4L2_DEVICE_NOTIFY_EVENT.
*/
void v4l2_subdev_notify_event(struct v4l2_subdev *sd,
const struct v4l2_event *ev);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7