Commit 21cfa72c authored by Todd Poynor's avatar Todd Poynor Committed by Greg Kroah-Hartman

staging: gasket: interrupt: fix function param line continuation style

Fix multi-line alignment formatting to look like:
      int ret = long_function_name(device, VARIABLE1, VARIABLE2,
                                   VARIABLE3, VARIABLE4);
Signed-off-by: default avatarTodd Poynor <toddpoynor@google.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 46b77a6b
......@@ -144,11 +144,10 @@ static void gasket_interrupt_setup(struct gasket_dev *gasket_dev)
}
mask = ~(0xFFFF << pack_shift);
value = gasket_dev_read_64(
gasket_dev,
value = gasket_dev_read_64(gasket_dev,
interrupt_data->interrupt_bar_index,
interrupt_data->interrupts[i].reg) &
mask;
interrupt_data->interrupts[i].reg);
value &= mask;
value |= interrupt_data->interrupts[i].index
<< pack_shift;
}
......@@ -187,8 +186,8 @@ static irqreturn_t gasket_msix_interrupt_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
static int gasket_interrupt_msix_init(
struct gasket_interrupt_data *interrupt_data)
static int
gasket_interrupt_msix_init(struct gasket_interrupt_data *interrupt_data)
{
int ret = 1;
int i;
......@@ -210,10 +209,9 @@ static int gasket_interrupt_msix_init(
interrupt_data->msix_configured = 1;
for (i = 0; i < interrupt_data->num_interrupts; i++) {
ret = request_irq(
interrupt_data->msix_entries[i].vector,
gasket_msix_interrupt_handler, 0, interrupt_data->name,
interrupt_data);
ret = request_irq(interrupt_data->msix_entries[i].vector,
gasket_msix_interrupt_handler, 0,
interrupt_data->name, interrupt_data);
if (ret) {
dev_err(&interrupt_data->pci_dev->dev,
......@@ -250,15 +248,13 @@ static void force_msix_interrupt_unmasking(struct gasket_dev *gasket_dev)
ulong location = APEX_BAR2_REG_KERNEL_HIB_MSIX_TABLE +
MSIX_MASK_BIT_OFFSET + i * MSIX_VECTOR_SIZE;
u32 mask =
gasket_dev_read_32(
gasket_dev,
gasket_dev_read_32(gasket_dev,
gasket_dev->interrupt_data->interrupt_bar_index,
location);
if (!(mask & 1))
continue;
/* Unmask the msix vector (clear 32 bits) */
gasket_dev_write_32(
gasket_dev, 0,
gasket_dev_write_32(gasket_dev, 0,
gasket_dev->interrupt_data->interrupt_bar_index,
location);
}
......@@ -267,8 +263,8 @@ static void force_msix_interrupt_unmasking(struct gasket_dev *gasket_dev)
#undef APEX_BAR2_REG_KERNEL_HIB_MSIX_TABLE
}
static ssize_t interrupt_sysfs_show(
struct device *device, struct device_attribute *attr, char *buf)
static ssize_t interrupt_sysfs_show(struct device *device,
struct device_attribute *attr, char *buf)
{
int i, ret;
ssize_t written = 0, total_written = 0;
......@@ -318,13 +314,13 @@ static ssize_t interrupt_sysfs_show(
}
static struct gasket_sysfs_attribute interrupt_sysfs_attrs[] = {
GASKET_SYSFS_RO(
interrupt_counts, interrupt_sysfs_show, ATTR_INTERRUPT_COUNTS),
GASKET_SYSFS_RO(interrupt_counts, interrupt_sysfs_show,
ATTR_INTERRUPT_COUNTS),
GASKET_END_OF_ATTR_ARRAY,
};
int gasket_interrupt_init(
struct gasket_dev *gasket_dev, const char *name, int type,
int gasket_interrupt_init(struct gasket_dev *gasket_dev, const char *name,
int type,
const struct gasket_interrupt_desc *interrupts,
int num_interrupts, int pack_width, int bar_index,
const struct gasket_wire_interrupt_offsets *wire_int_offsets)
......@@ -332,8 +328,8 @@ int gasket_interrupt_init(
int ret;
struct gasket_interrupt_data *interrupt_data;
interrupt_data = kzalloc(
sizeof(struct gasket_interrupt_data), GFP_KERNEL);
interrupt_data = kzalloc(sizeof(struct gasket_interrupt_data),
GFP_KERNEL);
if (!interrupt_data)
return -ENOMEM;
gasket_dev->interrupt_data = interrupt_data;
......@@ -402,14 +398,14 @@ int gasket_interrupt_init(
}
gasket_interrupt_setup(gasket_dev);
gasket_sysfs_create_entries(
gasket_dev->dev_info.device, interrupt_sysfs_attrs);
gasket_sysfs_create_entries(gasket_dev->dev_info.device,
interrupt_sysfs_attrs);
return 0;
}
static void gasket_interrupt_msix_cleanup(
struct gasket_interrupt_data *interrupt_data)
static void
gasket_interrupt_msix_cleanup(struct gasket_interrupt_data *interrupt_data)
{
int i;
......@@ -528,9 +524,8 @@ int gasket_interrupt_system_status(struct gasket_dev *gasket_dev)
return GASKET_STATUS_ALIVE;
}
int gasket_interrupt_set_eventfd(
struct gasket_interrupt_data *interrupt_data, int interrupt,
int event_fd)
int gasket_interrupt_set_eventfd(struct gasket_interrupt_data *interrupt_data,
int interrupt, int event_fd)
{
struct eventfd_ctx *ctx = eventfd_ctx_fdget(event_fd);
......@@ -544,8 +539,8 @@ int gasket_interrupt_set_eventfd(
return 0;
}
int gasket_interrupt_clear_eventfd(
struct gasket_interrupt_data *interrupt_data, int interrupt)
int gasket_interrupt_clear_eventfd(struct gasket_interrupt_data *interrupt_data,
int interrupt)
{
if (interrupt < 0 || interrupt >= interrupt_data->num_interrupts)
return -EINVAL;
......
......@@ -43,8 +43,8 @@ struct gasket_interrupt_data;
* are not possible to set up, but is otherwise OK; that device will report
* status LAMED.)
*/
int gasket_interrupt_init(
struct gasket_dev *gasket_dev, const char *name, int type,
int gasket_interrupt_init(struct gasket_dev *gasket_dev, const char *name,
int type,
const struct gasket_interrupt_desc *interrupts,
int num_interrupts, int pack_width, int bar_index,
const struct gasket_wire_interrupt_offsets *wire_int_offsets);
......@@ -87,9 +87,8 @@ int gasket_interrupt_reset_counts(struct gasket_dev *gasket_dev);
*
* Returns 0 on success, a negative error code otherwise.
*/
int gasket_interrupt_set_eventfd(
struct gasket_interrupt_data *interrupt_data, int interrupt,
int event_fd);
int gasket_interrupt_set_eventfd(struct gasket_interrupt_data *interrupt_data,
int interrupt, int event_fd);
/*
* Removes an interrupt-eventfd association.
......@@ -98,8 +97,8 @@ int gasket_interrupt_set_eventfd(
*
* Removes any eventfd associated with the specified interrupt, if any.
*/
int gasket_interrupt_clear_eventfd(
struct gasket_interrupt_data *interrupt_data, int interrupt);
int gasket_interrupt_clear_eventfd(struct gasket_interrupt_data *interrupt_data,
int interrupt);
/*
* The below functions exist for backwards compatibility.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment