Merge tag 'omap-for-v5.1/cpsw-signed' of...

Merge tag 'omap-for-v5.1/cpsw-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

One change to deprecate old CPSW Ethernet PHY mode selection driver

With the device tree changes configuring CPSW with a proper PHY driver,
we want to deprecate the old driver to avoid new users for it.

Note that this driver is based on the related dts changes.

* tag 'omap-for-v5.1/cpsw-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/net/cpsw-phy-sel.txt

-TI CPSW Phy mode Selection Device Tree Bindings
+TI CPSW Phy mode Selection Device Tree Bindings (DEPRECATED)
 -----------------------------------------------
 
 Required properties:

arch/arm/boot/dts/Makefile

@@ -719,6 +719,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-cm-t335.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
+	am335x-guardian.dtb \
 	am335x-icev2.dtb \
 	am335x-lxm.dtb \
 	am335x-moxa-uc-2101.dtb \

arch/arm/boot/dts/am335x-baltos-ir2110.dts

@@ -72,7 +72,3 @@ &cpsw_emac1 {
 	dual_emac_res_vlan = <2>;
 	phy-handle = <&phy1>;
 };
-
-&phy_sel {
-	rmii-clock-ext = <1>;
-};

arch/arm/boot/dts/am335x-baltos-ir3220.dts

@@ -114,7 +114,3 @@ &cpsw_emac1 {
 	dual_emac_res_vlan = <2>;
 	phy-handle = <&phy1>;
 };
-
-&phy_sel {
-	rmii-clock-ext = <1>;
-};

arch/arm/boot/dts/am335x-baltos-ir5221.dts

@@ -133,10 +133,6 @@ &cpsw_emac1 {
 	phy-handle = <&phy1>;
 };
 
-&phy_sel {
-	rmii-clock-ext = <1>;
-};
-
 &dcan1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dcan1_pins>;

arch/arm/boot/dts/am335x-chiliboard.dts

@@ -14,6 +14,10 @@ / {
 	compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
 		     "ti,am33xx";
 
+	chosen {
+		stdout-path = &uart0;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -151,10 +155,6 @@ &cpsw_emac0 {
 	phy-mode = "rmii";
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 /* USB */
 &usb {
 	status = "okay";

arch/arm/boot/dts/am335x-guardian.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018 Robert Bosch Power Tools GmbH
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Bosch AM335x Guardian";
+	compatible = "bosch,am335x-guardian", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		button21 {
+			label = "guardian-power-button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio2 21 0>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		led1 {
+			label = "green:heartbeat";
+			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green:mmc0";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
+		pinctrl-1 = <&lcd_pins_sleep>;
+
+		display-timings {
+			320x240 {
+				hactive         = <320>;
+				vactive         = <240>;
+				hback-porch     = <68>;
+				hfront-porch    = <20>;
+				hsync-len       = <1>;
+				vback-porch     = <18>;
+				vfront-porch    = <4>;
+				vsync-len       = <1>;
+				clock-frequency = <9000000>;
+				hsync-active    = <0>;
+				vsync-active    = <0>;
+			};
+		};
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <24>;
+			bus-width         = <16>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+	};
+
+	pwm7: dmtimer-pwm {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dmtimer7_pins>;
+	};
+
+	vmmcsd_fixed: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x1000000>;  /* CS0: 16MB for NAND */
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-ecc-opt = "bch16";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		/*
+		 * MTD partition table
+		 *
+		 * All SPL-* partitions are sized to minimal length which can
+		 * be independently programmable. For NAND flash this is equal
+		 * to size of erase-block.
+		 */
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "SPL";
+			reg = <0x0 0x40000>;
+		};
+
+		partition@1 {
+			label = "SPL.backup1";
+			reg = <0x40000  0x40000>;
+		};
+
+		partition@2 {
+			label = "SPL.backup2";
+			reg = <0x80000  0x40000>;
+		};
+
+		partition@3 {
+			label = "SPL.backup3";
+			reg = <0xc0000  0x40000>;
+		};
+
+		partition@4 {
+			label = "u-boot";
+			reg = <0x100000 0x100000>;
+		};
+
+		partition@5 {
+			label = "u-boot.backup1";
+			reg = <0x200000 0x100000>;
+		};
+
+		partition@6 {
+			label = "u-boot-env";
+			reg = <0x300000 0x40000>;
+		};
+
+		partition@7 {
+			label = "u-boot-env.backup1";
+			reg = <0x340000 0x40000>;
+		};
+
+		partition@8 {
+			label = "UBI";
+			reg = <0x380000 0x1fc80000>;
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+};
+
+&lcdc {
+	blue-and-red-wiring = "crossed";
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+	system-power-controller;
+};
+
+&spi0 {
+	ti,pindir-d0-out-d1-in;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+	ti,pmic-shutdown-controller;
+	interrupt-parent = <&intc>;
+	interrupts = <7>; /* NMI */
+
+	backlight {
+		isel = <1>;  /* 1 - ISET1, 2 ISET2 */
+		fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
+		default-brightness = <100>;
+	};
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1351500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
+			regulator-always-on;
+		};
+	};
+};
+
+&tscadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin &gpio_pins>;
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+
+	dmtimer7_pins: pinmux_dmtimer7_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5)
+		>;
+	};
+
+	gpio_keys_pins: pinmux_gpio_keys_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7)
+		>;
+	};
+
+	gpio_pins: pinmux_gpio_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	lcd_disen_pins: pinmux_lcd_disen_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
+		>;
+	};
+
+	lcd_pins_default: pinmux_lcd_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+		>;
+	};
+
+	lcd_pins_sleep: pinmux_lcd_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+};

arch/arm/boot/dts/am335x-icev2.dts

@@ -484,10 +484,6 @@ &mac {
 	dual_emac;
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 &davinci_mdio {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -123,10 +123,6 @@ &cpsw_emac1 {
 	phy-mode = "rmii";
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 &elm {
 	status = "okay";
 };

arch/arm/boot/dts/am335x-lxm.dts

@@ -328,10 +328,6 @@ &cpsw_emac1 {
 	dual_emac_res_vlan = <3>;
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 &mac {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;

arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi

@@ -159,11 +159,6 @@ &cpsw_emac1 {
 	status = "okay";
 };
 
-&phy_sel {
-	reg= <0x44e10650 0xf5>;
-	rmii-clock-ext;
-};
-
 &sham {
 	status = "okay";
 };

arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts

@@ -446,11 +446,6 @@ &cpsw_emac1 {
 	dual_emac_res_vlan = <2>;
 };
 
-&phy_sel {
-	reg= <0x44e10650 0xf5>;
-	rmii-clock-ext;
-};
-
 &sham {
 	status = "okay";
 };

arch/arm/boot/dts/am335x-phycore-som.dtsi

@@ -100,10 +100,6 @@ &mac {
 	status = "okay";
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 /* I2C Busses */
 &am33xx_pinmux {
 	i2c0_pins: pinmux_i2c0 {

arch/arm/boot/dts/am335x-shc.dts

+// SPDX-License-Identifier: GPL-2.0
 /*
  * support for the bosch am335x based shc c3 board
  *
  * Copyright, C) 2015 Heiko Schocher <hs@denx.de>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 /dts-v1/;
 

arch/arm/boot/dts/am33xx-l4.dtsi

@@ -279,17 +279,9 @@ scm: scm@0 {
 				#pinctrl-cells = <1>;
 				ranges = <0 0 0x2000>;
 
-				phy_sel: cpsw-phy-sel@650 {
-					compatible = "ti,am3352-cpsw-phy-sel";
-					reg= <0x650 0x4>;
-					reg-names = "gmii-sel";
-				};
-
 				am33xx_pinmux: pinmux@800 {
 					compatible = "pinctrl-single";
 					reg = <0x800 0x238>;
-					#address-cells = <1>;
-					#size-cells = <0>;
 					#pinctrl-cells = <1>;
 					pinctrl-single,register-width = <32>;
 					pinctrl-single,function-mask = <0x7f>;
@@ -302,6 +294,12 @@ scm_conf: scm_conf@0 {
 					#size-cells = <1>;
 					ranges = <0 0 0x800>;
 
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,am3352-phy-gmii-sel";
+						reg = <0x650 0x4>;
+						#phy-cells = <2>;
+					};
+
 					scm_clocks: clocks {
 						#address-cells = <1>;
 						#size-cells = <0>;
@@ -717,7 +715,6 @@ mac: ethernet@0 {
 				interrupts = <40 41 42 43>;
 				ranges = <0 0 0x8000>;
 				syscon = <&scm_conf>;
-				cpsw-phy-sel = <&phy_sel>;
 				status = "disabled";
 
 				davinci_mdio: mdio@1000 {
@@ -733,11 +730,13 @@ davinci_mdio: mdio@1000 {
 				cpsw_emac0: slave@200 {
 					/* Filled in by U-Boot */
 					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 1 1>;
 				};
 
 				cpsw_emac1: slave@300 {
 					/* Filled in by U-Boot */
 					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 2 1>;
 				};
 			};
 		};

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -71,7 +71,7 @@ matrix_keypad: matrix_keypad0 {
 		pinctrl-0 = <&matrix_keypad_default>;
 		pinctrl-1 = <&matrix_keypad_sleep>;
 
-		linux,wakeup;
+		wakeup-source;
 
 		row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */
 				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */

arch/arm/boot/dts/am437x-l4.dtsi

@@ -280,12 +280,6 @@ scm: scm@0 {
 				#size-cells = <1>;
 				ranges = <0 0 0x4000>;
 
-				phy_sel: cpsw-phy-sel@650 {
-					compatible = "ti,am43xx-cpsw-phy-sel";
-					reg= <0x650 0x4>;
-					reg-names = "gmii-sel";
-				};
-
 				am43xx_pinmux: pinmux@800 {
 					compatible = "ti,am437-padconf",
 						     "pinctrl-single";
@@ -300,11 +294,17 @@ am43xx_pinmux: pinmux@800 {
 				};
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x0 0x800>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,am43xx-phy-gmii-sel";
+						reg = <0x650 0x4>;
+						#phy-cells = <2>;
+					};
+
 					scm_clocks: clocks {
 						#address-cells = <1>;
 						#size-cells = <0>;
@@ -555,7 +555,6 @@ GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
 				cpts_clock_shift = <29>;
 				ranges = <0 0 0x8000>;
 				syscon = <&scm_conf>;
-				cpsw-phy-sel = <&phy_sel>;
 
 				davinci_mdio: mdio@1000 {
 					compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
@@ -572,11 +571,13 @@ davinci_mdio: mdio@1000 {
 				cpsw_emac0: slave@200 {
 					/* Filled in by U-Boot */
 					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 1 0>;
 				};
 
 				cpsw_emac1: slave@300 {
 					/* Filled in by U-Boot */
 					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 2 0>;
 				};
 			};
 		};

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -584,10 +584,7 @@ ethphy0: ethernet-phy@16 {
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
-};
-
-&phy_sel {
-	rmii-clock-ext;
+	phys = <&phy_gmii_sel 1 1>;
 };
 
 &i2c0 {

arch/arm/boot/dts/dm814x.dtsi

@@ -343,6 +343,12 @@ scm_conf: scm_conf@0 {
 					#size-cells = <1>;
 					ranges = <0 0 0x800>;
 
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,dm814-phy-gmii-sel";
+						reg = <0x650 0x4>;
+						#phy-cells = <1>;
+					};
+
 					scm_clocks: clocks {
 						#address-cells = <1>;
 						#size-cells = <0>;
@@ -549,17 +555,14 @@ davinci_mdio: mdio@4a100800 {
 			cpsw_emac0: slave@4a100200 {
 				/* Filled in by U-Boot */
 				mac-address = [ 00 00 00 00 00 00 ];
+				phys = <&phy_gmii_sel 1>;
+
 			};
 
 			cpsw_emac1: slave@4a100300 {
 				/* Filled in by U-Boot */
 				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@48140650 {
-				compatible = "ti,am3352-cpsw-phy-sel";
-				reg= <0x48140650 0x4>;
-				reg-names = "gmii-sel";
+				phys = <&phy_gmii_sel 2>;
 			};
 		};
 

arch/arm/boot/dts/dra7-l4.dtsi

@@ -77,18 +77,18 @@ pbias_mmc_reg: pbias_mmc_omap5 {
 						};
 					};
 
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,dra7xx-phy-gmii-sel";
+						reg = <0x554 0x4>;
+						#phy-cells = <1>;
+					};
+
 					scm_conf_clocks: clocks {
 						#address-cells = <1>;
 						#size-cells = <0>;
 					};
 				};
 
-				phy_sel: cpsw-phy-sel@554 {
-					compatible = "ti,dra7xx-cpsw-phy-sel";
-					reg= <0x554 0x4>;
-					reg-names = "gmii-sel";
-				};
-
 				dra7_pmx_core: pinmux@1400 {
 					compatible = "ti,dra7-padconf",
 						     "pinctrl-single";
@@ -3099,7 +3099,6 @@ mac: ethernet@0 {
 					     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
 				ranges = <0 0 0x4000>;
 				syscon = <&scm_conf>;
-				cpsw-phy-sel = <&phy_sel>;
 				status = "disabled";
 
 				davinci_mdio: mdio@1000 {
@@ -3114,11 +3113,13 @@ davinci_mdio: mdio@1000 {
 				cpsw_emac0: slave@200 {
 					/* Filled in by U-Boot */
 					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 1>;
 				};
 
 				cpsw_emac1: slave@300 {
 					/* Filled in by U-Boot */
 					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 2>;
 				};
 			};
 		};

arch/arm/boot/dts/omap3-evm-common.dtsi

@@ -122,6 +122,7 @@ &mmc1 {
 };
 
 &mmc2 {
+	interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>;
 	vmmc-supply = <&wl12xx_vmmc>;
 	non-removable;
 	bus-width = <4>;
@@ -132,8 +133,10 @@ &mmc2 {
 	wlcore: wlcore@2 {
 		compatible = "ti,wl1271";
 		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 149 */
+		/* gpio_149 with uart1_rts pad as wakeirq */
+		interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>,
+				      <&omap3_pmx_core 0x14e>;
+		interrupt-names = "irq", "wakeup";
 		ref-clock-frequency = <38400000>;
 	};
 };

arch/arm/boot/dts/omap3-evm-processor-common.dtsi

@@ -86,6 +86,10 @@ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_da
 			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
 			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
 			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat4.sdmmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat5.sdmmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat6.sdmmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)	/* sdmmc2_dat7.sdmmc2_clkin */
 		>;
 	};
 
@@ -127,9 +131,13 @@ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)
 		>;
 	};
 
+	/*
+	 * Note that gpio_150 pulled high with internal pull to prevent wlcore
+	 * reset on return from off mode in idle.
+	 */
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7)		/* uart1_cts.gpio_150 */
 			OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
 		>;
 	};

arch/arm/boot/dts/omap3-gta04.dtsi

@@ -32,6 +32,14 @@ aliases {
 		display1 = &tv0;
 	};
 
+	ldo_3v3: fixedregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ldo_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	/* fixed 26MHz oscillator */
 	hfclk_26m: oscillator {
 		#clock-cells = <0>;
@@ -116,6 +124,7 @@ lcd: td028ttec1@0 {
 			spi-cpol;
 			spi-cpha;
 
+			backlight= <&backlight>;
 			label = "lcd";
 			port {
 				lcd_in: endpoint {
@@ -125,7 +134,7 @@ lcd_in: endpoint {
 		};
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm11 0 12000000 0>;
 		pwm-names = "backlight";
@@ -224,6 +233,15 @@ tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins {
 	};
 };
 
+&omap3_pmx_wkup {
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */
+		>;
+	};
+};
+
 &omap3_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
@@ -312,6 +330,12 @@ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 		>;
        };
 
+	gps_pins: pinmux_gps_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */
+		>;
+	};
+
 	hdq_pins: hdq_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
@@ -636,6 +660,11 @@ &twl_keypad {
 	status = "disabled";
 };
 
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>;
@@ -644,6 +673,14 @@ &uart1 {
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
+	gnss: gnss {
+		compatible = "wi2wi,w2sg0004";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gps_pins>;
+		sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		lna-supply = <&vsim>;
+		vcc-supply = <&ldo_3v3>;
+	};
 };
 
 &uart3 {

arch/arm/boot/dts/omap3-gta04a5.dts

@@ -82,7 +82,7 @@ OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
 
 /*
  * for WL183x module see
- * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+ * Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
  */
 
 &wifi_pwrseq {

arch/arm/boot/dts/omap4-droid4-xt894.dts

@@ -359,20 +359,24 @@ &mmc2 {
 
 &mmc3 {
 	vmmc-supply = <&wl12xx_vmmc>;
+	/* uart2_tx.sdmmc3_dat1 pad as wakeirq */
 	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core 0xde>;
-
+	interrupt-names = "irq", "wakeup";
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+	keep-power-in-suspend;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
 	wlcore: wlcore@2 {
 		compatible = "ti,wl1285", "ti,wl1283";
 		reg = <2>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */
+		/* gpio_100 with gpmc_wait2 pad as wakeirq */
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>,
+				      <&omap4_pmx_core 0x4e>;
+		interrupt-names = "irq", "wakeup";
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};

arch/arm/boot/dts/omap4-panda-common.dtsi

@@ -485,8 +485,10 @@ &mmc5 {
 	wlcore: wlcore@2 {
 		compatible = "ti,wl1271";
 		reg = <2>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
+		/* gpio_53 with gpmc_ncs3 pad as wakeup */
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>,
+				      <&omap4_pmx_core 0x3a>;
+		interrupt-names = "irq", "wakeup";
 		ref-clock-frequency = <38400000>;
 	};
 };

arch/arm/boot/dts/omap4-sdp.dts

@@ -26,6 +26,9 @@ aliases {
 	};
 
 	vdd_eth: fixedregulator-vdd-eth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&enet_enable_gpio>;
+
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_ETH";
 		regulator-min-microvolt = <3300000>;
@@ -352,6 +355,29 @@ OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
 			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
 		>;
 	};
+
+	/* gpio_48 for ENET_ENABLE */
+	enet_enable_gpio: pinmux_enet_enable_gpio {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+		>;
+	};
+
+	ks8851_pins: pinmux_ks8851_pins {
+		pinctrl-single,pins = <
+			/* ENET_INT */
+			OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ad10.gpio_34 */
+			/*
+			 * Misterious pin which makes the ethernet working
+			 * The legacy board file requested this pin on boot
+			 * (ETH_KS8851_QUART) and set it to high, similarly to
+			 * the ENET_ENABLE pin.
+			 * We could use gpio-hog to keep it high, but let's use
+			 * it as a reset GPIO for ks8851.
+			 */
+			OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.gpio_138 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -452,12 +478,16 @@ &mcspi1 {
 	pinctrl-0 = <&mcspi1_pins>;
 
 	eth@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ks8851_pins>;
+
 		compatible = "ks8851";
 		spi-max-frequency = <24000000>;
 		reg = <0>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
 		vdd-supply = <&vdd_eth>;
+		reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
 	};
 };
 

drivers/net/ethernet/ti/Kconfig

@@ -49,10 +49,11 @@ config TI_DAVINCI_CPDMA
 	  will be called davinci_cpdma.  This is recommended.
 
 config TI_CPSW_PHY_SEL
-	bool
+	bool "TI CPSW Phy mode Selection (DEPRECATED)"
+	default n
 	---help---
 	  This driver supports configuring of the phy mode connected to
-	  the CPSW.
+	  the CPSW. DEPRECATED: use PHY_TI_GMII_SEL.
 
 config TI_CPSW_ALE
 	tristate "TI CPSW ALE Support"
@@ -64,7 +65,6 @@ config TI_CPSW
 	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST
 	select TI_DAVINCI_CPDMA
 	select TI_DAVINCI_MDIO
-	select TI_CPSW_PHY_SEL
 	select TI_CPSW_ALE
 	select MFD_SYSCON
 	select REGMAP

drivers/net/ethernet/ti/cpsw.h

@@ -21,7 +21,13 @@
 			 ((mac)[2] << 16) | ((mac)[3] << 24))
 #define mac_lo(mac)	(((mac)[4] << 0) | ((mac)[5] << 8))
 
+#if IS_ENABLED(CONFIG_TI_CPSW_PHY_SEL)
 void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave);
+#else
+static inline
+void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave)
+{}
+#endif
 int ti_cm_get_macid(struct device *dev, int slave, u8 *mac_addr);
 
 #endif /* __CPSW_H__ */