Commit 255acee7 authored by Heiko Carstens's avatar Heiko Carstens Committed by Linus Torvalds

[PATCH] s390: additional_cpus parameter

Introduce additional_cpus command line option.  By default no additional cpu
can be attached to the system anymore.  Only the cpus present at IPL time can
be switched on/off.  If it is desired that additional cpus can be attached to
the system the maximum number of additional cpus needs to be specified with
this option.

This change is necessary in order to limit the waste of per_cpu data
structures.
Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 1fca251f
...@@ -11,6 +11,8 @@ ...@@ -11,6 +11,8 @@
Joel Schopp <jschopp@austin.ibm.com> Joel Schopp <jschopp@austin.ibm.com>
ia64/x86_64: ia64/x86_64:
Ashok Raj <ashok.raj@intel.com> Ashok Raj <ashok.raj@intel.com>
s390:
Heiko Carstens <heiko.carstens@de.ibm.com>
Authors: Ashok Raj <ashok.raj@intel.com> Authors: Ashok Raj <ashok.raj@intel.com>
Lots of feedback: Nathan Lynch <nathanl@austin.ibm.com>, Lots of feedback: Nathan Lynch <nathanl@austin.ibm.com>,
...@@ -44,12 +46,10 @@ maxcpus=n Restrict boot time cpus to n. Say if you have 4 cpus, using ...@@ -44,12 +46,10 @@ maxcpus=n Restrict boot time cpus to n. Say if you have 4 cpus, using
maxcpus=2 will only boot 2. You can choose to bring the maxcpus=2 will only boot 2. You can choose to bring the
other cpus later online, read FAQ's for more info. other cpus later online, read FAQ's for more info.
additional_cpus*=n Use this to limit hotpluggable cpus. This option sets additional_cpus=n [x86_64, s390 only] use this to limit hotpluggable cpus.
This option sets
cpu_possible_map = cpu_present_map + additional_cpus cpu_possible_map = cpu_present_map + additional_cpus
(*) Option valid only for following architectures
- x86_64, ia64
ia64 and x86_64 use the number of disabled local apics in ACPI tables MADT ia64 and x86_64 use the number of disabled local apics in ACPI tables MADT
to determine the number of potentially hot-pluggable cpus. The implementation to determine the number of potentially hot-pluggable cpus. The implementation
should only rely on this to count the #of cpus, but *MUST* not rely on the should only rely on this to count the #of cpus, but *MUST* not rely on the
......
...@@ -600,6 +600,7 @@ setup_arch(char **cmdline_p) ...@@ -600,6 +600,7 @@ setup_arch(char **cmdline_p)
init_mm.brk = (unsigned long) &_end; init_mm.brk = (unsigned long) &_end;
parse_cmdline_early(cmdline_p); parse_cmdline_early(cmdline_p);
parse_early_param();
setup_memory(); setup_memory();
setup_resources(); setup_resources();
...@@ -607,6 +608,7 @@ setup_arch(char **cmdline_p) ...@@ -607,6 +608,7 @@ setup_arch(char **cmdline_p)
cpu_init(); cpu_init();
__cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr; __cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr;
smp_setup_cpu_possible_map();
/* /*
* Create kernel page tables and switch to virtual addressing. * Create kernel page tables and switch to virtual addressing.
......
/* /*
* arch/s390/kernel/smp.c * arch/s390/kernel/smp.c
* *
* S390 version * Copyright (C) IBM Corp. 1999,2006
* Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
* Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
* Martin Schwidefsky (schwidefsky@de.ibm.com) * Martin Schwidefsky (schwidefsky@de.ibm.com)
* Heiko Carstens (heiko.carstens@de.ibm.com) * Heiko Carstens (heiko.carstens@de.ibm.com)
...@@ -41,8 +40,6 @@ ...@@ -41,8 +40,6 @@
#include <asm/cpcmd.h> #include <asm/cpcmd.h>
#include <asm/tlbflush.h> #include <asm/tlbflush.h>
/* prototypes */
extern volatile int __cpu_logical_map[]; extern volatile int __cpu_logical_map[];
/* /*
...@@ -51,13 +48,11 @@ extern volatile int __cpu_logical_map[]; ...@@ -51,13 +48,11 @@ extern volatile int __cpu_logical_map[];
struct _lowcore *lowcore_ptr[NR_CPUS]; struct _lowcore *lowcore_ptr[NR_CPUS];
cpumask_t cpu_online_map; cpumask_t cpu_online_map = CPU_MASK_NONE;
cpumask_t cpu_possible_map = CPU_MASK_ALL; cpumask_t cpu_possible_map = CPU_MASK_NONE;
static struct task_struct *current_set[NR_CPUS]; static struct task_struct *current_set[NR_CPUS];
EXPORT_SYMBOL(cpu_online_map);
/* /*
* Reboot, halt and power_off routines for SMP. * Reboot, halt and power_off routines for SMP.
*/ */
...@@ -490,10 +485,10 @@ void smp_ctl_clear_bit(int cr, int bit) { ...@@ -490,10 +485,10 @@ void smp_ctl_clear_bit(int cr, int bit) {
* Lets check how many CPUs we have. * Lets check how many CPUs we have.
*/ */
void static unsigned int
__init smp_check_cpus(unsigned int max_cpus) __init smp_count_cpus(void)
{ {
int cpu, num_cpus; unsigned int cpu, num_cpus;
__u16 boot_cpu_addr; __u16 boot_cpu_addr;
/* /*
...@@ -503,19 +498,20 @@ __init smp_check_cpus(unsigned int max_cpus) ...@@ -503,19 +498,20 @@ __init smp_check_cpus(unsigned int max_cpus)
boot_cpu_addr = S390_lowcore.cpu_data.cpu_addr; boot_cpu_addr = S390_lowcore.cpu_data.cpu_addr;
current_thread_info()->cpu = 0; current_thread_info()->cpu = 0;
num_cpus = 1; num_cpus = 1;
for (cpu = 0; cpu <= 65535 && num_cpus < max_cpus; cpu++) { for (cpu = 0; cpu <= 65535; cpu++) {
if ((__u16) cpu == boot_cpu_addr) if ((__u16) cpu == boot_cpu_addr)
continue; continue;
__cpu_logical_map[num_cpus] = (__u16) cpu; __cpu_logical_map[1] = (__u16) cpu;
if (signal_processor(num_cpus, sigp_sense) == if (signal_processor(1, sigp_sense) ==
sigp_not_operational) sigp_not_operational)
continue; continue;
cpu_set(num_cpus, cpu_present_map);
num_cpus++; num_cpus++;
} }
printk("Detected %d CPU's\n",(int) num_cpus); printk("Detected %d CPU's\n",(int) num_cpus);
printk("Boot cpu address %2X\n", boot_cpu_addr); printk("Boot cpu address %2X\n", boot_cpu_addr);
return num_cpus;
} }
/* /*
...@@ -676,6 +672,32 @@ __cpu_up(unsigned int cpu) ...@@ -676,6 +672,32 @@ __cpu_up(unsigned int cpu)
return 0; return 0;
} }
static unsigned int __initdata additional_cpus;
void __init smp_setup_cpu_possible_map(void)
{
unsigned int pcpus, cpu;
pcpus = smp_count_cpus() + additional_cpus;
if (pcpus > NR_CPUS)
pcpus = NR_CPUS;
for (cpu = 0; cpu < pcpus; cpu++)
cpu_set(cpu, cpu_possible_map);
cpu_present_map = cpu_possible_map;
}
#ifdef CONFIG_HOTPLUG_CPU
static int __init setup_additional_cpus(char *s)
{
additional_cpus = simple_strtoul(s, NULL, 0);
return 0;
}
early_param("additional_cpus", setup_additional_cpus);
int int
__cpu_disable(void) __cpu_disable(void)
{ {
...@@ -744,6 +766,8 @@ cpu_die(void) ...@@ -744,6 +766,8 @@ cpu_die(void)
for(;;); for(;;);
} }
#endif /* CONFIG_HOTPLUG_CPU */
/* /*
* Cycle through the processors and setup structures. * Cycle through the processors and setup structures.
*/ */
...@@ -757,7 +781,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) ...@@ -757,7 +781,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
/* request the 0x1201 emergency signal external interrupt */ /* request the 0x1201 emergency signal external interrupt */
if (register_external_interrupt(0x1201, do_ext_call_interrupt) != 0) if (register_external_interrupt(0x1201, do_ext_call_interrupt) != 0)
panic("Couldn't request external interrupt 0x1201"); panic("Couldn't request external interrupt 0x1201");
smp_check_cpus(max_cpus);
memset(lowcore_ptr,0,sizeof(lowcore_ptr)); memset(lowcore_ptr,0,sizeof(lowcore_ptr));
/* /*
* Initialize prefix pages and stacks for all possible cpus * Initialize prefix pages and stacks for all possible cpus
...@@ -806,14 +829,12 @@ void __devinit smp_prepare_boot_cpu(void) ...@@ -806,14 +829,12 @@ void __devinit smp_prepare_boot_cpu(void)
BUG_ON(smp_processor_id() != 0); BUG_ON(smp_processor_id() != 0);
cpu_set(0, cpu_online_map); cpu_set(0, cpu_online_map);
cpu_set(0, cpu_present_map);
S390_lowcore.percpu_offset = __per_cpu_offset[0]; S390_lowcore.percpu_offset = __per_cpu_offset[0];
current_set[0] = current; current_set[0] = current;
} }
void smp_cpus_done(unsigned int max_cpus) void smp_cpus_done(unsigned int max_cpus)
{ {
cpu_present_map = cpu_possible_map;
} }
/* /*
...@@ -845,6 +866,7 @@ static int __init topology_init(void) ...@@ -845,6 +866,7 @@ static int __init topology_init(void)
subsys_initcall(topology_init); subsys_initcall(topology_init);
EXPORT_SYMBOL(cpu_online_map);
EXPORT_SYMBOL(cpu_possible_map); EXPORT_SYMBOL(cpu_possible_map);
EXPORT_SYMBOL(lowcore_ptr); EXPORT_SYMBOL(lowcore_ptr);
EXPORT_SYMBOL(smp_ctl_set_bit); EXPORT_SYMBOL(smp_ctl_set_bit);
......
...@@ -31,6 +31,7 @@ typedef struct ...@@ -31,6 +31,7 @@ typedef struct
__u16 cpu; __u16 cpu;
} sigp_info; } sigp_info;
extern void smp_setup_cpu_possible_map(void);
extern int smp_call_function_on(void (*func) (void *info), void *info, extern int smp_call_function_on(void (*func) (void *info), void *info,
int nonatomic, int wait, int cpu); int nonatomic, int wait, int cpu);
#define NO_PROC_ID 0xFF /* No processor magic marker */ #define NO_PROC_ID 0xFF /* No processor magic marker */
...@@ -104,6 +105,7 @@ smp_call_function_on(void (*func) (void *info), void *info, ...@@ -104,6 +105,7 @@ smp_call_function_on(void (*func) (void *info), void *info,
#define smp_cpu_not_running(cpu) 1 #define smp_cpu_not_running(cpu) 1
#define smp_get_cpu(cpu) ({ 0; }) #define smp_get_cpu(cpu) ({ 0; })
#define smp_put_cpu(cpu) ({ 0; }) #define smp_put_cpu(cpu) ({ 0; })
#define smp_setup_cpu_possible_map()
#endif #endif
#endif #endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment