Commit 25be5e6c authored by Len Brown's avatar Len Brown Committed by Linus Torvalds

[PATCH] VIA IRQ quirk

Delete quirk_via_bridge(), restore quirk_via_irqpic() -- but now
improved to be invoked upon device ENABLE, and now only for VIA devices
-- not all devices behind VIA bridges.
Signed-off-by: default avatarBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: default avatarLen Brown <len.brown@intel.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 2efe86b8
......@@ -1029,7 +1029,6 @@ void pcibios_penalize_isa_irq(int irq)
static int pirq_enable_irq(struct pci_dev *dev)
{
u8 pin;
extern int via_interrupt_line_quirk;
struct pci_dev *temp_dev;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
......@@ -1084,10 +1083,6 @@ static int pirq_enable_irq(struct pci_dev *dev)
printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
'A' + pin, pci_name(dev), msg);
}
/* VIA bridges use interrupt line for apic/pci steering across
the V-Link */
else if (via_interrupt_line_quirk)
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq & 15);
return 0;
}
......
......@@ -391,7 +391,6 @@ acpi_pci_irq_enable (
u8 pin = 0;
int edge_level = ACPI_LEVEL_SENSITIVE;
int active_high_low = ACPI_ACTIVE_LOW;
extern int via_interrupt_line_quirk;
char *link = NULL;
ACPI_FUNCTION_TRACE("acpi_pci_irq_enable");
......@@ -444,9 +443,6 @@ acpi_pci_irq_enable (
}
}
if (via_interrupt_line_quirk)
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq & 15);
dev->irq = acpi_register_gsi(irq, edge_level, active_high_low);
printk(KERN_INFO PREFIX "PCI Interrupt %s[%c] -> ",
......
......@@ -18,6 +18,7 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/acpi.h>
#include "pci.h"
/* Deal with broken BIOS'es that neglect to enable passive release,
......@@ -467,9 +468,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC,
* non-x86 architectures (yes Via exists on PPC among other places),
* we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
* interrupts delivered properly.
*
* TODO: When we have device-specific interrupt routers,
* quirk_via_irqpic will go away from quirks.
*/
/*
......@@ -494,6 +492,29 @@ static void __devinit quirk_via_acpi(struct pci_dev *d)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi );
static void __devinit quirk_via_irqpic(struct pci_dev *dev)
{
u8 irq, new_irq;
#ifdef CONFIG_X86_IO_APIC
if (nr_ioapics && !skip_ioapic_setup)
return;
#endif
#ifdef CONFIG_ACPI
if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
return;
#endif
new_irq = dev->irq & 0xf;
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
if (new_irq != irq) {
printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
pci_name(dev), irq, new_irq);
udelay(15); /* unknown if delay really needed */
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);
/*
* PIIX3 USB: We have to disable USB interrupts that are
* hardwired to PIRQD# and may be shared with an
......@@ -683,19 +704,6 @@ static void __init quirk_disable_pxb(struct pci_dev *pdev)
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb );
/*
* VIA northbridges care about PCI_INTERRUPT_LINE
*/
int via_interrupt_line_quirk;
static void __devinit quirk_via_bridge(struct pci_dev *pdev)
{
if(pdev->devfn == 0) {
printk(KERN_INFO "PCI: Via IRQ fixup\n");
via_interrupt_line_quirk = 1;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_bridge );
/*
* Serverworks CSB5 IDE does not fully support native mode
......
......@@ -25,6 +25,8 @@
#ifndef _LINUX_ACPI_H
#define _LINUX_ACPI_H
#ifdef CONFIG_ACPI
#ifndef _LINUX
#define _LINUX
#endif
......@@ -533,4 +535,5 @@ static inline int acpi_get_pxm(acpi_handle handle)
extern int pnpacpi_disabled;
#endif /* CONFIG_ACPI */
#endif /*_LINUX_ACPI_H*/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment