[S390] Whitespace cleanup.

Huge s390 assembly files whitespace cleanup.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

arch/s390/kernel/entry.S

@@ -426,7 +426,6 @@ sys_sigaltstack_glue:
 	l	%r1,BASED(.Lsigaltstack)
 	br	%r1			# branch to sys_sigreturn
 
-
 /*
  * Program check handler routine
  */
@@ -1037,7 +1036,7 @@ cleanup_io_leave_insn:
 .Lclone:	.long	sys_clone
 .Lexecve:	.long	sys_execve
 .Lfork: 	.long	sys_fork
-.Lrt_sigreturn:.long  sys_rt_sigreturn
+.Lrt_sigreturn: .long	sys_rt_sigreturn
 .Lrt_sigsuspend:
 		.long	sys_rt_sigsuspend
 .Lsigreturn:	.long	sys_sigreturn
@@ -1048,7 +1047,7 @@ cleanup_io_leave_insn:
 .Lschedtail:	.long	schedule_tail
 .Lsysc_table:	.long	sys_call_table
 #ifdef CONFIG_TRACE_IRQFLAGS
-.Ltrace_irq_on:.long  trace_hardirqs_on
+.Ltrace_irq_on: .long	trace_hardirqs_on
 .Ltrace_irq_off:
 		.long	trace_hardirqs_off
 #endif

arch/s390/kernel/entry64.S

@@ -326,7 +326,6 @@ sysc_singlestep:
 	larl	%r14,sysc_return	# load adr. of system return
 	jg	do_single_step		# branch to do_sigtrap
 
-
 #
 # call syscall_trace before and after system call
 # special linkage: %r12 contains the return address for trace_svc

arch/s390/kernel/head.S

@@ -326,7 +326,7 @@ iplstart:
 	l	%r2,.Linitrd		# addr of ramdisk
 	st	%r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
 	bas	%r14,.Lloader		# load ramdisk
- 	st    %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of ramdisk
+	st	%r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd
 	ltr	%r2,%r2
 	bnz	.Lrdcont
 	st	%r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found

arch/s390/kernel/head64.S

@@ -45,7 +45,7 @@ startup_continue:
 	sigp	%r1,%r0,0x12		# switch to esame mode
 	sam64				# switch to 64 bit mode
 	lctlg	%c0,%c15,.Lctl-.LPG1(%r13)	# load control registers
-	lg    %r12,.Lparmaddr-.LPG1(%r13)# pointer to parameter area
+	lg	%r12,.Lparmaddr-.LPG1(%r13)	# pointer to parameter area
 					# move IPL device to lowcore
 	mvc	__LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
 #
@@ -342,7 +342,7 @@ _stext:	basr  %r13,0                    # get base
 	oi	4(%r15),0x10		# switch on low address proctection
 	lctlg	%c0,%c15,0(%r15)
 
-        lam    0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
+	lam	0,15,.Laregs-.LPG3(%r13)	# load acrs needed by uaccess
 	brasl	%r14,start_kernel	# go to C code
 #
 # We returned from start_kernel ?!? PANIK
@@ -352,4 +352,4 @@ _stext:	basr  %r13,0                    # get base
 
 	.align	8
 .Ldw:	.quad	0x0002000180000000,0x0000000000000000
-.Laregs:    .long  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+.Laregs:.long	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0

arch/s390/kernel/reipl.S

@@ -92,6 +92,3 @@ do_reipl_asm:	basr	%r13,0
 		.long	0x00000000,0x00000000
 		.long	0x00000000,0x00000000
 		.long	0x00000000,0x00000000
-	
-
-	

arch/s390/kernel/reipl64.S

@@ -109,4 +109,3 @@ do_reipl_asm:	basr	%r13,0
 		.long	0x00000000,0x00000000
 		.long	0x00000000,0x00000000
 		.long	0x00000000,0x00000000
-	

arch/s390/kernel/relocate_kernel.S

@@ -3,7 +3,7 @@
  *
  * (C) Copyright IBM Corp. 2005
  *
- * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com>
+ * Author(s): Rolf Adelsberger,
  *	      Heiko Carstens <heiko.carstens@de.ibm.com>
  *
  */
@@ -24,10 +24,10 @@
 	.text
 	.globl		relocate_kernel
 	relocate_kernel:
-		basr	%r13,0		#base address
+		basr	%r13,0		# base address
 	.base:
-		stnsm	sys_msk-.base(%r13),0xf8	#disable DAT and IRQ (external)
-		spx	zero64-.base(%r13)	#absolute addressing mode
+		stnsm	sys_msk-.base(%r13),0xf8	# disable DAT and IRQ (external)
+		spx	zero64-.base(%r13)	# absolute addressing mode
 		stctl	%c0,%c15,ctlregs-.base(%r13)
 		stm	%r0,%r15,gprregs-.base(%r13)
 		la	%r1,load_psw-.base(%r13)
@@ -51,50 +51,50 @@
 	.back_pgm:
 		lm	%r0,%r15,gprregs-.base(%r13)
 	.start_reloc:
-		lhi	%r10,-1		#preparing the mask
-		sll	%r10,12		#shift it such that it becomes 0xf000
+		lhi	%r10,-1		# preparing the mask
+		sll	%r10,12		# shift it such that it becomes 0xf000
 	.top:
-		lhi	%r7,4096	#load PAGE_SIZE in r7
-		lhi	%r9,4096	#load PAGE_SIZE in r9
-		l	%r5,0(%r2)	#read another word for indirection page
-		ahi	%r2,4		#increment pointer
-		tml	%r5,0x1		#is it a destination page?
-		je	.indir_check	#NO, goto "indir_check"
-		lr	%r6,%r5		#r6 = r5
-		nr	%r6,%r10	#mask it out and...
-		j	.top		#...next iteration
+		lhi	%r7,4096	# load PAGE_SIZE in r7
+		lhi	%r9,4096	# load PAGE_SIZE in r9
+		l	%r5,0(%r2)	# read another word for indirection page
+		ahi	%r2,4		# increment pointer
+		tml	%r5,0x1		# is it a destination page?
+		je	.indir_check	# NO, goto "indir_check"
+		lr	%r6,%r5		# r6 = r5
+		nr	%r6,%r10	# mask it out and...
+		j	.top		# ...next iteration
 	.indir_check:
-		tml	%r5,0x2		#is it a indirection page?
-		je	.done_test	#NO, goto "done_test"
-		nr	%r5,%r10	#YES, mask out,
-		lr	%r2,%r5		#move it into the right register,
-		j	.top		#and read next...
+		tml	%r5,0x2		# is it a indirection page?
+		je	.done_test	# NO, goto "done_test"
+		nr	%r5,%r10	# YES, mask out,
+		lr	%r2,%r5		# move it into the right register,
+		j	.top		# and read next...
 	.done_test:
-		tml	%r5,0x4		#is it the done indicator?
-		je	.source_test	#NO! Well, then it should be the source indicator...
-		j	.done		#ok, lets finish it here...
+		tml	%r5,0x4		# is it the done indicator?
+		je	.source_test	# NO! Well, then it should be the source indicator...
+		j	.done		# ok, lets finish it here...
 	.source_test:
-		tml	%r5,0x8		#it should be a source indicator...
-		je	.top		#NO, ignore it...
-		lr	%r8,%r5		#r8 = r5
-		nr	%r8,%r10	#masking
-	0:	mvcle	%r6,%r8,0x0	#copy PAGE_SIZE bytes from r8 to r6 - pad with 0
+		tml	%r5,0x8		# it should be a source indicator...
+		je	.top		# NO, ignore it...
+		lr	%r8,%r5		# r8 = r5
+		nr	%r8,%r10	# masking
+	0:	mvcle	%r6,%r8,0x0	# copy PAGE_SIZE bytes from r8 to r6 - pad with 0
 		jo	0b
 		j	.top
 	.done:
-		sr	%r0,%r0		#clear register r0
-		la	%r4,load_psw-.base(%r13)	#load psw-address into the register
-		o	%r3,4(%r4)	#or load address into psw
+		sr	%r0,%r0		# clear register r0
+		la	%r4,load_psw-.base(%r13)	# load psw-address into the register
+		o	%r3,4(%r4)	# or load address into psw
 		st	%r3,4(%r4)
-		mvc	0(8,%r0),0(%r4)	#copy psw to absolute address 0
+		mvc	0(8,%r0),0(%r4)	# copy psw to absolute address 0
 		tm	have_diag308-.base(%r13),0x01
 		jno	.no_diag308
 		diag	%r0,%r0,0x308
 	.no_diag308:
-		sr	%r1,%r1		#clear %r1
-		sr	%r2,%r2		#clear %r2
-		sigp	%r1,%r2,0x12	#set cpuid to zero
-		lpsw	0		#hopefully start new kernel...
+		sr	%r1,%r1		# clear %r1
+		sr	%r2,%r2		# clear %r2
+		sigp	%r1,%r2,0x12	# set cpuid to zero
+		lpsw	0		# hopefully start new kernel...
 
 		.align	8
 	zero64:

arch/s390/kernel/relocate_kernel64.S

@@ -3,7 +3,7 @@
  *
  * (C) Copyright IBM Corp. 2005
  *
- * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com>
+ * Author(s): Rolf Adelsberger,
  *	      Heiko Carstens <heiko.carstens@de.ibm.com>
  *
  */
@@ -25,10 +25,10 @@
 	.text
 	.globl		relocate_kernel
 	relocate_kernel:
-		basr	%r13,0		#base address
+		basr	%r13,0		# base address
 	.base:
-		stnsm	sys_msk-.base(%r13),0xf8	#disable DAT and IRQs
-		spx	zero64-.base(%r13)	#absolute addressing mode
+		stnsm	sys_msk-.base(%r13),0xf8	# disable DAT and IRQs
+		spx	zero64-.base(%r13)	# absolute addressing mode
 		stctg	%c0,%c15,ctlregs-.base(%r13)
 		stmg	%r0,%r15,gprregs-.base(%r13)
 		lghi	%r0,3
@@ -44,9 +44,9 @@
 		lghi	%r0,0
 		diag	%r0,%r0,0x308
 	.back:
-		lhi	%r1,1		#mode 1 = esame
-		sigp	%r1,%r0,0x12	#switch to esame mode
-		sam64			#switch to 64 bit addressing mode
+		lhi	%r1,1		# mode 1 = esame
+		sigp	%r1,%r0,0x12	# switch to esame mode
+		sam64			# switch to 64 bit addressing mode
 		basr	%r13,0
 	.back_base:
 		oi	have_diag308-.back_base(%r13),0x01
@@ -56,48 +56,48 @@
 	.back_pgm:
 		lmg	%r0,%r15,gprregs-.base(%r13)
 	.top:
-		lghi	%r7,4096	#load PAGE_SIZE in r7
-		lghi	%r9,4096	#load PAGE_SIZE in r9
-		lg	%r5,0(%r2)	#read another word for indirection page
-		aghi	%r2,8		#increment pointer
-		tml	%r5,0x1		#is it a destination page?
-		je	.indir_check	#NO, goto "indir_check"
-		lgr	%r6,%r5		#r6 = r5
-		nill	%r6,0xf000	#mask it out and...
-		j	.top		#...next iteration
+		lghi	%r7,4096	# load PAGE_SIZE in r7
+		lghi	%r9,4096	# load PAGE_SIZE in r9
+		lg	%r5,0(%r2)	# read another word for indirection page
+		aghi	%r2,8		# increment pointer
+		tml	%r5,0x1		# is it a destination page?
+		je	.indir_check	# NO, goto "indir_check"
+		lgr	%r6,%r5		# r6 = r5
+		nill	%r6,0xf000	# mask it out and...
+		j	.top		# ...next iteration
 	.indir_check:
-		tml     %r5,0x2		#is it a indirection page?
-		je      .done_test	#NO, goto "done_test"
-		nill    %r5,0xf000	#YES, mask out,
-		lgr     %r2,%r5		#move it into the right register,
-		j       .top		#and read next...
+		tml	%r5,0x2		# is it a indirection page?
+		je	.done_test	# NO, goto "done_test"
+		nill	%r5,0xf000	# YES, mask out,
+		lgr	%r2,%r5		# move it into the right register,
+		j	.top		# and read next...
 	.done_test:
-		tml     %r5,0x4		#is it the done indicator?
-		je      .source_test	#NO! Well, then it should be the source indicator...
-		j       .done		#ok, lets finish it here...
+		tml	%r5,0x4		# is it the done indicator?
+		je	.source_test	# NO! Well, then it should be the source indicator...
+		j	.done		# ok, lets finish it here...
 	.source_test:
-		tml     %r5,0x8		#it should be a source indicator...
-		je      .top		#NO, ignore it...
-		lgr     %r8,%r5		#r8 = r5
-		nill    %r8,0xf000	#masking
-	0:	mvcle   %r6,%r8,0x0	#copy PAGE_SIZE bytes from r8 to r6 - pad with 0
+		tml	%r5,0x8		# it should be a source indicator...
+		je	.top		# NO, ignore it...
+		lgr	%r8,%r5		# r8 = r5
+		nill	%r8,0xf000	# masking
+	0:	mvcle	%r6,%r8,0x0	# copy PAGE_SIZE bytes from r8 to r6 - pad with 0
 		jo	0b
 		j	.top
 	.done:
-		sgr     %r0,%r0		#clear register r0
-		la      %r4,load_psw-.base(%r13)	#load psw-address into the register
-		o	%r3,4(%r4)	#or load address into psw
+		sgr	%r0,%r0		# clear register r0
+		la	%r4,load_psw-.base(%r13)	# load psw-address into the register
+		o	%r3,4(%r4)	# or load address into psw
 		st	%r3,4(%r4)
-		mvc     0(8,%r0),0(%r4)	#copy psw to absolute address 0
+		mvc	0(8,%r0),0(%r4)	# copy psw to absolute address 0
 		tm	have_diag308-.base(%r13),0x01
 		jno	.no_diag308
 		diag	%r0,%r0,0x308
 	.no_diag308:
-		sam31			#31 bit mode
-		sr      %r1,%r1		#erase register r1
-		sr      %r2,%r2		#erase register r2
-		sigp    %r1,%r2,0x12	#set cpuid to zero
-		lpsw    0		#hopefully start new kernel...
+		sam31			# 31 bit mode
+		sr	%r1,%r1		# erase register r1
+		sr	%r2,%r2		# erase register r2
+		sigp	%r1,%r2,0x12	# set cpuid to zero
+		lpsw	0		# hopefully start new kernel...
 
 		.align	8
 	zero64: