drm/amdgpu: Relocate some definitions v2

Move some KFD-related (but used in amdgpu_drv.c) definitions from
kfd_priv.h to kgd_kfd_interface.h so we don't need to include kfd_priv.h
in amdgpu_drv.c. This fixes a build failure when AMDGPU is enabled but
MMU_NOTIFIER is not.
This patch also disables KFD-related module options when HSA_AMD is not
enabled.

v2: rebase (Alex)
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c

@@ -39,7 +39,6 @@
 #include "amdgpu_gem.h"
 
 #include "amdgpu_amdkfd.h"
-#include "kfd_priv.h"
 
 /*
  * KMS wrapper.
@@ -128,16 +127,6 @@ int amdgpu_compute_multipipe = -1;
 int amdgpu_gpu_recovery = -1; /* auto */
 int amdgpu_emu_mode = 0;
 uint amdgpu_smu_memory_pool_size = 0;
-/* KFD parameters */
-int sched_policy = KFD_SCHED_POLICY_HWS;
-int hws_max_conc_proc = 8;
-int cwsr_enable = 1;
-int max_num_of_queues_per_device = KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT;
-int send_sigterm;
-int debug_largebar;
-int ignore_crat;
-int noretry;
-int halt_if_hws_hang;
 
 /**
  * DOC: vramlimit (int)
@@ -543,12 +532,14 @@ MODULE_PARM_DESC(smu_memory_pool_size,
 		"0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte");
 module_param_named(smu_memory_pool_size, amdgpu_smu_memory_pool_size, uint, 0444);
 
+#ifdef CONFIG_HSA_AMD
 /**
  * DOC: sched_policy (int)
  * Set scheduling policy. Default is HWS(hardware scheduling) with over-subscription.
  * Setting 1 disables over-subscription. Setting 2 disables HWS and statically
  * assigns queues to HQDs.
  */
+int sched_policy = KFD_SCHED_POLICY_HWS;
 module_param(sched_policy, int, 0444);
 MODULE_PARM_DESC(sched_policy,
 	"Scheduling policy (0 = HWS (Default), 1 = HWS without over-subscription, 2 = Non-HWS (Used for debugging only)");
@@ -558,6 +549,7 @@ MODULE_PARM_DESC(sched_policy,
  * Maximum number of processes that HWS can schedule concurrently. The maximum is the
  * number of VMIDs assigned to the HWS, which is also the default.
  */
+int hws_max_conc_proc = 8;
 module_param(hws_max_conc_proc, int, 0444);
 MODULE_PARM_DESC(hws_max_conc_proc,
 	"Max # processes HWS can execute concurrently when sched_policy=0 (0 = no concurrency, #VMIDs for KFD = Maximum(default))");
@@ -568,6 +560,7 @@ MODULE_PARM_DESC(hws_max_conc_proc,
  * the middle of a compute wave. Default is 1 to enable this feature. Setting 0
  * disables it.
  */
+int cwsr_enable = 1;
 module_param(cwsr_enable, int, 0444);
 MODULE_PARM_DESC(cwsr_enable, "CWSR enable (0 = Off, 1 = On (Default))");
 
@@ -576,6 +569,7 @@ MODULE_PARM_DESC(cwsr_enable, "CWSR enable (0 = Off, 1 = On (Default))");
  * Maximum number of queues per device. Valid setting is between 1 and 4096. Default
  * is 4096.
  */
+int max_num_of_queues_per_device = KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT;
 module_param(max_num_of_queues_per_device, int, 0444);
 MODULE_PARM_DESC(max_num_of_queues_per_device,
 	"Maximum number of supported queues per device (1 = Minimum, 4096 = default)");
@@ -585,6 +579,7 @@ MODULE_PARM_DESC(max_num_of_queues_per_device,
  * Send sigterm to HSA process on unhandled exceptions. Default is not to send sigterm
  * but just print errors on dmesg. Setting 1 enables sending sigterm.
  */
+int send_sigterm;
 module_param(send_sigterm, int, 0444);
 MODULE_PARM_DESC(send_sigterm,
 	"Send sigterm to HSA process on unhandled exception (0 = disable, 1 = enable)");
@@ -596,6 +591,7 @@ MODULE_PARM_DESC(send_sigterm,
  * size, usually 256MB.
  * Default value is 0, diabled.
  */
+int debug_largebar;
 module_param(debug_largebar, int, 0444);
 MODULE_PARM_DESC(debug_largebar,
 	"Debug large-bar flag used to simulate large-bar capability on non-large bar machine (0 = disable, 1 = enable)");
@@ -606,6 +602,7 @@ MODULE_PARM_DESC(debug_largebar,
  * table to get information about AMD APUs. This option can serve as a workaround on
  * systems with a broken CRAT table.
  */
+int ignore_crat;
 module_param(ignore_crat, int, 0444);
 MODULE_PARM_DESC(ignore_crat,
 	"Ignore CRAT table during KFD initialization (0 = use CRAT (default), 1 = ignore CRAT)");
@@ -616,6 +613,7 @@ MODULE_PARM_DESC(ignore_crat,
  * Setting 1 disables retry.
  * Retry is needed for recoverable page faults.
  */
+int noretry;
 module_param(noretry, int, 0644);
 MODULE_PARM_DESC(noretry,
 	"Set sh_mem_config.retry_disable on Vega10 (0 = retry enabled (default), 1 = retry disabled)");
@@ -625,8 +623,10 @@ MODULE_PARM_DESC(noretry,
  * Halt if HWS hang is detected. Default value, 0, disables the halt on hang.
  * Setting 1 enables halt on hang.
  */
+int halt_if_hws_hang;
 module_param(halt_if_hws_hang, int, 0644);
 MODULE_PARM_DESC(halt_if_hws_hang, "Halt if HWS hang is detected (0 = off (default), 1 = on)");
+#endif
 
 static const struct pci_device_id pciidlist[] = {
 #ifdef  CONFIG_DRM_AMDGPU_SI

drivers/gpu/drm/amd/amdkfd/kfd_priv.h

@@ -103,7 +103,6 @@
  */
 extern int max_num_of_queues_per_device;
 
-#define KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT 4096
 #define KFD_MAX_NUM_OF_QUEUES_PER_DEVICE		\
 	(KFD_MAX_NUM_OF_PROCESSES *			\
 			KFD_MAX_NUM_OF_QUEUES_PER_PROCESS)
@@ -149,33 +148,6 @@ extern int noretry;
  */
 extern int halt_if_hws_hang;
 
-/**
- * enum kfd_sched_policy
- *
- * @KFD_SCHED_POLICY_HWS: H/W scheduling policy known as command processor (cp)
- * scheduling. In this scheduling mode we're using the firmware code to
- * schedule the user mode queues and kernel queues such as HIQ and DIQ.
- * the HIQ queue is used as a special queue that dispatches the configuration
- * to the cp and the user mode queues list that are currently running.
- * the DIQ queue is a debugging queue that dispatches debugging commands to the
- * firmware.
- * in this scheduling mode user mode queues over subscription feature is
- * enabled.
- *
- * @KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION: The same as above but the over
- * subscription feature disabled.
- *
- * @KFD_SCHED_POLICY_NO_HWS: no H/W scheduling policy is a mode which directly
- * set the command processor registers and sets the queues "manually". This
- * mode is used *ONLY* for debugging proposes.
- *
- */
-enum kfd_sched_policy {
-	KFD_SCHED_POLICY_HWS = 0,
-	KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION,
-	KFD_SCHED_POLICY_NO_HWS
-};
-
 enum cache_policy {
 	cache_policy_coherent,
 	cache_policy_noncoherent

drivers/gpu/drm/amd/include/kgd_kfd_interface.h

@@ -98,6 +98,33 @@ enum kgd_engine_type {
 	KGD_ENGINE_MAX
 };
 
+/**
+ * enum kfd_sched_policy
+ *
+ * @KFD_SCHED_POLICY_HWS: H/W scheduling policy known as command processor (cp)
+ * scheduling. In this scheduling mode we're using the firmware code to
+ * schedule the user mode queues and kernel queues such as HIQ and DIQ.
+ * the HIQ queue is used as a special queue that dispatches the configuration
+ * to the cp and the user mode queues list that are currently running.
+ * the DIQ queue is a debugging queue that dispatches debugging commands to the
+ * firmware.
+ * in this scheduling mode user mode queues over subscription feature is
+ * enabled.
+ *
+ * @KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION: The same as above but the over
+ * subscription feature disabled.
+ *
+ * @KFD_SCHED_POLICY_NO_HWS: no H/W scheduling policy is a mode which directly
+ * set the command processor registers and sets the queues "manually". This
+ * mode is used *ONLY* for debugging proposes.
+ *
+ */
+enum kfd_sched_policy {
+	KFD_SCHED_POLICY_HWS = 0,
+	KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION,
+	KFD_SCHED_POLICY_NO_HWS
+};
+
 struct kgd2kfd_shared_resources {
 	/* Bit n == 1 means VMID n is available for KFD. */
 	unsigned int compute_vmid_bitmap;
@@ -153,6 +180,7 @@ struct tile_config {
 	uint32_t num_ranks;
 };
 
+#define KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT 4096
 
 /*
  * Allocation flag domains