Commit 26925c59 authored by Paul Mackerras's avatar Paul Mackerras

Merge ../linux-2.6

parents 55bb239e cd0cca7b
......@@ -58,7 +58,7 @@ P: Person
M: Mail patches to
L: Mailing list that is relevant to this area
W: Web-page with status/info
T: SCM tree type and URL. Type is one of: git, hg, quilt.
T: SCM tree type and location. Type is one of: git, hg, quilt.
S: Status, one of the following:
Supported: Someone is actually paid to look after this.
......@@ -227,6 +227,7 @@ AGPGART DRIVER
P: Dave Jones
M: davej@codemonkey.org.uk
W: http://www.codemonkey.org.uk/projects/agp/
T: git kernel.org:/pub/scm/linux/kernel/git/davej/agpgart.git
S: Maintained
AHA152X SCSI DRIVER
......@@ -384,6 +385,7 @@ P: David Woodhouse
M: dwmw2@infradead.org
L: linux-audit@redhat.com
W: http://people.redhat.com/sgrubb/audit/
T: git kernel.org:/pub/scm/linux/kernel/git/dwmw2/audit-2.6.git
S: Maintained
AX.25 NETWORK LAYER
......@@ -432,6 +434,7 @@ L: bluez-devel@lists.sf.net
W: http://bluez.sf.net
W: http://www.bluez.org
W: http://www.holtmann.org/linux/bluetooth/
T: git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
S: Maintained
BLUETOOTH RFCOMM LAYER
......@@ -547,6 +550,7 @@ P: Steve French
M: sfrench@samba.org
L: samba-technical@lists.samba.org
W: http://us1.samba.org/samba/Linux_CIFS_client.html
T: git kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6.git
S: Supported
CIRRUS LOGIC GENERIC FBDEV DRIVER
......@@ -608,6 +612,7 @@ P: Dave Jones
M: davej@codemonkey.org.uk
L: cpufreq@lists.linux.org.uk
W: http://www.codemonkey.org.uk/projects/cpufreq/
T: git kernel.org/pub/scm/linux/kernel/davej/cpufreq.git
S: Maintained
CPUID/MSR DRIVER
......@@ -641,6 +646,7 @@ M: herbert@gondor.apana.org.au
P: David S. Miller
M: davem@davemloft.net
L: linux-crypto@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6.git
S: Maintained
CYBERPRO FB DRIVER
......@@ -1185,6 +1191,7 @@ P: Bartlomiej Zolnierkiewicz
M: B.Zolnierkiewicz@elka.pw.edu.pl
L: linux-kernel@vger.kernel.org
L: linux-ide@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git
S: Maintained
IDE/ATAPI CDROM DRIVER
......@@ -1279,6 +1286,7 @@ P: Vojtech Pavlik
M: vojtech@suse.cz
L: linux-input@atrey.karlin.mff.cuni.cz
L: linux-joystick@atrey.karlin.mff.cuni.cz
T: git kernel.org:/pub/scm/linux/kernel/git/dtor/input.git
S: Maintained
INOTIFY
......@@ -1392,6 +1400,7 @@ P: Kai Germaschewski
M: kai.germaschewski@gmx.de
L: isdn4linux@listserv.isdn4linux.de
W: http://www.isdn4linux.de
T: git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git
S: Maintained
ISDN SUBSYSTEM (Eicon active card driver)
......@@ -1420,6 +1429,7 @@ P: Dave Kleikamp
M: shaggy@austin.ibm.com
L: jfs-discussion@lists.sourceforge.net
W: http://jfs.sourceforge.net/
T: git kernel.org:/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
S: Supported
KCONFIG
......@@ -1534,6 +1544,7 @@ P: Paul Mackerras
M: paulus@samba.org
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
T: git kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc.git
S: Supported
LINUX FOR POWER MACINTOSH
......@@ -1601,6 +1612,7 @@ P: Chris Wright
M: chrisw@osdl.org
L: linux-security-module@wirex.com
W: http://lsm.immunix.org
T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
S: Supported
LM83 HARDWARE MONITOR DRIVER
......@@ -1695,6 +1707,7 @@ P: David Woodhouse
M: dwmw2@infradead.org
W: http://www.linux-mtd.infradead.org/
L: linux-mtd@lists.infradead.org
T: git kernel.org:/pub/scm/linux/kernel/git/tglx/mtd-2.6.git
S: Maintained
MICROTEK X6 SCANNER
......@@ -1815,6 +1828,7 @@ M: yoshfuji@linux-ipv6.org
P: Patrick McHardy
M: kaber@coreworks.de
L: netdev@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/davem/net-2.6.git
S: Maintained
IPVS
......@@ -1866,6 +1880,7 @@ M: aia21@cantab.net
L: linux-ntfs-dev@lists.sourceforge.net
L: linux-kernel@vger.kernel.org
W: http://linux-ntfs.sf.net/
T: git kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
S: Maintained
NVIDIA (RIVA) FRAMEBUFFER DRIVER
......@@ -2389,6 +2404,7 @@ P: Anton Blanchard
M: anton@samba.org
L: sparclinux@vger.kernel.org
L: ultralinux@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git
S: Maintained
SHARP LH SUPPORT (LH7952X & LH7A40X)
......@@ -2527,6 +2543,7 @@ P: Adrian Bunk
M: trivial@kernel.org
L: linux-kernel@vger.kernel.org
W: http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/
T: git kernel.org:/pub/scm/linux/kernel/git/bunk/trivial.git
S: Maintained
TMS380 TOKEN-RING NETWORK DRIVER
......@@ -2860,6 +2877,7 @@ P: Latchesar Ionkov
M: lucho@ionkov.net
L: v9fs-developer@lists.sourceforge.net
W: http://v9fs.sf.net
T: git kernel.org:/pub/scm/linux/kernel/ericvh/v9fs-devel.git
S: Maintained
VIDEO FOR LINUX
......
......@@ -393,13 +393,6 @@ void flush_thread(void)
{
struct task_struct *tsk = current;
/*
* Remove function-return probe instances associated with this task
* and put them back on the free list. Do not insert an exit probe for
* this function, it will be disabled by kprobe_flush_task if you do.
*/
kprobe_flush_task(tsk);
memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8);
memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
/*
......
......@@ -132,7 +132,7 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum)
}
}
printk("PCI: Probing PCI hardware (bus %02x)\n", busnum);
printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, NULL);
}
......@@ -144,7 +144,7 @@ static int __init pcibios_init(void)
struct cpuinfo_x86 *c = &boot_cpu_data;
if (!raw_pci_ops) {
printk("PCI: System does not support PCI\n");
printk(KERN_WARNING "PCI: System does not support PCI\n");
return 0;
}
......
......@@ -201,7 +201,7 @@ static int __init pci_sanity_check(struct pci_raw_ops *o)
return 1;
}
DBG("PCI: Sanity check failed\n");
DBG(KERN_WARNING "PCI: Sanity check failed\n");
return 0;
}
......
......@@ -221,6 +221,11 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask)
continue;
r = &dev->resource[idx];
if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
continue;
if ((idx == PCI_ROM_RESOURCE) &&
(!(r->flags & IORESOURCE_ROM_ENABLE)))
continue;
if (!r->start && r->end) {
printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
return -EINVAL;
......@@ -230,8 +235,6 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask)
if (r->flags & IORESOURCE_MEM)
cmd |= PCI_COMMAND_MEMORY;
}
if (dev->resource[PCI_ROM_RESOURCE].start)
cmd |= PCI_COMMAND_MEMORY;
if (cmd != old_cmd) {
printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
pci_write_config_word(dev, PCI_COMMAND, cmd);
......
......@@ -718,13 +718,6 @@ kernel_thread_helper (int (*fn)(void *), void *arg)
void
flush_thread (void)
{
/*
* Remove function-return probe instances associated with this task
* and put them back on the free list. Do not insert an exit probe for
* this function, it will be disabled by kprobe_flush_task if you do.
*/
kprobe_flush_task(current);
/* drop floating-point and debug-register state if it exists: */
current->thread.flags &= ~(IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID);
ia64_drop_fpu(current);
......
......@@ -457,7 +457,6 @@ void flush_thread(void)
if (t->flags & _TIF_ABI_PENDING)
t->flags ^= (_TIF_ABI_PENDING | _TIF_32BIT);
#endif
kprobe_flush_task(current);
#ifndef CONFIG_SMP
if (last_task_used_math == current)
......
......@@ -110,13 +110,11 @@ unsigned long __init mmu_mapin_ram(void)
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
spin_lock(&init_mm.page_table_lock);
pmdp = pmd_offset(pgd_offset_k(v), v);
pmd_val(*pmdp++) = val;
pmd_val(*pmdp++) = val;
pmd_val(*pmdp++) = val;
pmd_val(*pmdp++) = val;
spin_unlock(&init_mm.page_table_lock);
v += LARGE_PAGE_SIZE_16M;
p += LARGE_PAGE_SIZE_16M;
......@@ -127,10 +125,8 @@ unsigned long __init mmu_mapin_ram(void)
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
spin_lock(&init_mm.page_table_lock);
pmdp = pmd_offset(pgd_offset_k(v), v);
pmd_val(*pmdp) = val;
spin_unlock(&init_mm.page_table_lock);
v += LARGE_PAGE_SIZE_4M;
p += LARGE_PAGE_SIZE_4M;
......
......@@ -287,15 +287,15 @@ static int open_high_hpage_areas(struct mm_struct *mm, u16 newareas)
int prepare_hugepage_range(unsigned long addr, unsigned long len)
{
int err;
int err = 0;
if ( (addr+len) < addr )
return -EINVAL;
if ((addr + len) < 0x100000000UL)
if (addr < 0x100000000UL)
err = open_low_hpage_areas(current->mm,
LOW_ESID_MASK(addr, len));
else
if ((addr + len) >= 0x100000000UL)
err = open_high_hpage_areas(current->mm,
HTLB_AREA_MASK(addr, len));
if (err) {
......@@ -754,9 +754,7 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
}
/*
* No need to use ldarx/stdcx here because all who
* might be updating the pte will hold the
* page_table_lock
* No need to use ldarx/stdcx here
*/
*ptep = __pte(new_pte & ~_PAGE_BUSY);
......
......@@ -495,7 +495,7 @@ EXPORT_SYMBOL(flush_icache_user_range);
* We use it to preload an HPTE into the hash table corresponding to
* the updated linux PTE.
*
* This must always be called with the mm->page_table_lock held
* This must always be called with the pte lock held.
*/
void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
pte_t pte)
......
......@@ -149,6 +149,12 @@ void flush_tlb_mm(struct mm_struct *mm)
return;
}
/*
* It is safe to go down the mm's list of vmas when called
* from dup_mmap, holding mmap_sem. It would also be safe from
* unmap_region or exit_mmap, but not from vmtruncate on SMP -
* but it seems dup_mmap is the only SMP case which gets here.
*/
for (mp = mm->mmap; mp != NULL; mp = mp->vm_next)
flush_range(mp->vm_mm, mp->vm_start, mp->vm_end);
FINISH_FLUSH;
......
......@@ -95,7 +95,7 @@ static void pte_free_submit(struct pte_freelist_batch *batch)
void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
{
/* This is safe as we are holding page_table_lock */
/* This is safe since tlb_gather_mmu has disabled preemption */
cpumask_t local_cpumask = cpumask_of_cpu(smp_processor_id());
struct pte_freelist_batch **batchp = &__get_cpu_var(pte_freelist_cur);
......@@ -206,7 +206,7 @@ void __flush_tlb_pending(struct ppc64_tlb_batch *batch)
void pte_free_finish(void)
{
/* This is safe as we are holding page_table_lock */
/* This is safe since tlb_gather_mmu has disabled preemption */
struct pte_freelist_batch **batchp = &__get_cpu_var(pte_freelist_cur);
if (*batchp == NULL)
......
......@@ -351,13 +351,6 @@ void flush_thread(void)
struct task_struct *tsk = current;
struct thread_info *t = current_thread_info();
/*
* Remove function-return probe instances associated with this task
* and put them back on the free list. Do not insert an exit probe for
* this function, it will be disabled by kprobe_flush_task if you do.
*/
kprobe_flush_task(tsk);
if (t->flags & _TIF_ABI_PENDING)
t->flags ^= (_TIF_ABI_PENDING | _TIF_IA32);
......
......@@ -133,7 +133,7 @@ static struct kobj_type ktype_bus = {
decl_subsys(bus, &ktype_bus, NULL);
/* Manually detach a device from it's associated driver. */
/* Manually detach a device from its associated driver. */
static int driver_helper(struct device *dev, void *data)
{
const char *name = data;
......@@ -151,14 +151,13 @@ static ssize_t driver_unbind(struct device_driver *drv,
int err = -ENODEV;
dev = bus_find_device(bus, NULL, (void *)buf, driver_helper);
if ((dev) &&
(dev->driver == drv)) {
if (dev && dev->driver == drv) {
device_release_driver(dev);
err = count;
}
if (err)
put_device(dev);
put_bus(bus);
return err;
return count;
}
static DRIVER_ATTR(unbind, S_IWUSR, NULL, driver_unbind);
......@@ -175,16 +174,14 @@ static ssize_t driver_bind(struct device_driver *drv,
int err = -ENODEV;
dev = bus_find_device(bus, NULL, (void *)buf, driver_helper);
if ((dev) &&
(dev->driver == NULL)) {
if (dev && dev->driver == NULL) {
down(&dev->sem);
err = driver_probe_device(drv, dev);
up(&dev->sem);
put_device(dev);
}
if (err)
put_device(dev);
put_bus(bus);
return err;
return count;
}
static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind);
......
......@@ -62,7 +62,6 @@ void device_bind_driver(struct device * dev)
* because we don't know the format of the ID structures, nor what
* is to be considered a match and what is not.
*
*
* This function returns 1 if a match is found, an error if one
* occurs (that is not -ENODEV or -ENXIO), and 0 otherwise.
*
......@@ -158,7 +157,6 @@ static int __driver_attach(struct device * dev, void * data)
driver_probe_device(drv, dev);
up(&dev->sem);
return 0;
}
......@@ -225,15 +223,15 @@ void driver_detach(struct device_driver * drv)
struct device * dev;
for (;;) {
spin_lock_irq(&drv->klist_devices.k_lock);
spin_lock(&drv->klist_devices.k_lock);
if (list_empty(&drv->klist_devices.k_list)) {
spin_unlock_irq(&drv->klist_devices.k_lock);
spin_unlock(&drv->klist_devices.k_lock);
break;
}
dev = list_entry(drv->klist_devices.k_list.prev,
struct device, knode_driver.n_node);
get_device(dev);
spin_unlock_irq(&drv->klist_devices.k_lock);
spin_unlock(&drv->klist_devices.k_lock);
down(&dev->sem);
if (dev->driver == drv)
......
......@@ -3714,12 +3714,6 @@ static int floppy_open(struct inode *inode, struct file *filp)
USETF(FD_VERIFY);
}
/* set underlying gendisk policy to reflect real ro/rw status */
if (UTESTF(FD_DISK_WRITABLE))
inode->i_bdev->bd_disk->policy = 0;
else
inode->i_bdev->bd_disk->policy = 1;
if (UDRS->fd_ref == -1 || (UDRS->fd_ref && (filp->f_flags & O_EXCL)))
goto out2;
......
......@@ -95,7 +95,7 @@ unsigned long drm_alloc_pages(int order, int area)
unsigned long addr;
unsigned int sz;
address = __get_free_pages(GFP_KERNEL, order);
address = __get_free_pages(GFP_KERNEL|__GFP_COMP, order);
if (!address)
return 0;
......
......@@ -221,7 +221,7 @@ unsigned long DRM(alloc_pages) (int order, int area) {
}
spin_unlock(&DRM(mem_lock));
address = __get_free_pages(GFP_KERNEL, order);
address = __get_free_pages(GFP_KERNEL|__GFP_COMP, order);
if (!address) {
spin_lock(&DRM(mem_lock));
++DRM(mem_stats)[area].fail_count;
......
......@@ -161,7 +161,7 @@ static int mga_driver_device_is_agp(drm_device_t * dev)
* device.
*/
if ((pdev->device == 0x0525)
if ((pdev->device == 0x0525) && pdev->bus->self
&& (pdev->bus->self->vendor == 0x3388)
&& (pdev->bus->self->device == 0x0021)) {
return 0;
......
......@@ -214,8 +214,6 @@ typedef struct drm_radeon_private {
int microcode_version;
int is_pci;
struct {
u32 boxes;
int freelist_timeouts;
......@@ -275,6 +273,7 @@ typedef struct drm_radeon_private {
/* starting from here on, data is preserved accross an open */
uint32_t flags; /* see radeon_chip_flags */
int is_pci;
} drm_radeon_private_t;
typedef struct drm_radeon_buf_priv {
......
......@@ -570,7 +570,7 @@ static int __init hdaps_init(void)
hdaps_idev->evbit[0] = BIT(EV_ABS);
input_set_abs_params(hdaps_idev, ABS_X,
-256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT);
input_set_abs_params(hdaps_idev, ABS_X,
input_set_abs_params(hdaps_idev, ABS_Y,
-256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT);
input_register_device(hdaps_idev);
......
......@@ -522,8 +522,15 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
struct i2c_client *client = to_i2c_client(dev);
struct it87_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
u8 reg = it87_read_value(client, IT87_REG_FAN_DIV);
down(&data->update_lock);
switch (nr) {
case 0: data->fan_div[nr] = reg & 0x07; break;
case 1: data->fan_div[nr] = (reg >> 3) & 0x07; break;
case 2: data->fan_div[nr] = (reg & 0x40) ? 3 : 1; break;
}
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
up(&data->update_lock);
......
......@@ -451,7 +451,7 @@ static DEVICE_ATTR(fan3_div, S_IRUGO, show_fan_3_div, NULL);
static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
{
struct lm78_data *data = lm78_update_device(dev);
return sprintf(buf, "%d\n", vid_from_reg(82, data->vid));
return sprintf(buf, "%d\n", vid_from_reg(data->vid, 82));
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
......
......@@ -456,7 +456,9 @@ static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *a
(w83627thf == data->type || w83637hf == data->type))
/* use VRM9 calculation */
data->in_min[0] = (u8)(((val * 100) - 70000 + 244) / 488);
data->in_min[0] =
SENSORS_LIMIT(((val * 100) - 70000 + 244) / 488, 0,
255);
else
/* use VRM8 (standard) calculation */
data->in_min[0] = IN_TO_REG(val);
......@@ -481,7 +483,9 @@ static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *a
(w83627thf == data->type || w83637hf == data->type))
/* use VRM9 calculation */
data->in_max[0] = (u8)(((val * 100) - 70000 + 244) / 488);
data->in_max[0] =
SENSORS_LIMIT(((val * 100) - 70000 + 244) / 488, 0,
255);
else
/* use VRM8 (standard) calculation */
data->in_max[0] = IN_TO_REG(val);
......
......@@ -59,7 +59,6 @@ struct slot {
struct slot *next;
u8 bus;
u8 device;
u16 status;
u32 number;
u8 state;
struct timer_list task_event;
......
......@@ -207,7 +207,6 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id)
* power fault Cleared
*/
info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
p_slot->status = 0x00;
taskInfo->event_type = INT_POWER_FAULT_CLEAR;
} else {
/*
......@@ -215,8 +214,6 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id)
*/
info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
taskInfo->event_type = INT_POWER_FAULT;
/* set power fault status for this board */
p_slot->status = 0xFF;
info("power fault bit %x set\n", hp_slot);
}
if (rc)
......@@ -317,13 +314,10 @@ static int board_added(struct slot *p_slot)
return rc;
}
dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status);
/* Check for a power fault */
if (p_slot->status == 0xFF) {
/* power fault occurred, but it was benign */
if (p_slot->hpc_ops->query_power_fault(p_slot)) {
dbg("%s: power fault detected\n", __FUNCTION__);
rc = POWER_FAILURE;
p_slot->status = 0;
goto err_exit;
}
......@@ -334,8 +328,6 @@ static int board_added(struct slot *p_slot)
goto err_exit;
}
p_slot->status = 0;
/*
* Some PCI Express root ports require fixup after hot-plug operation.
*/
......@@ -382,9 +374,6 @@ static int remove_board(struct slot *p_slot)
dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
/* Change status to shutdown */
p_slot->status = 0x01;
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
......
......@@ -750,7 +750,7 @@ static int hpc_power_on_slot(struct slot * slot)
{
struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
u16 slot_cmd;
u16 slot_ctrl;
u16 slot_ctrl, slot_status;
int retval = 0;
......@@ -767,6 +767,14 @@ static int hpc_power_on_slot(struct slot * slot)
return -1;
}
/* Clear sticky power-fault bit from previous power failures */
hp_register_read_word(php_ctlr->pci_dev,
SLOT_STATUS(slot->ctrl->cap_base), slot_status);
slot_status &= PWR_FAULT_DETECTED;
if (slot_status)
hp_register_write_word(php_ctlr->pci_dev,
SLOT_STATUS(slot->ctrl->cap_base), slot_status);
retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
if (retval) {
......
......@@ -178,6 +178,7 @@ EXPORT_SYMBOL(pci_osc_support_set);
/**
* pci_osc_control_set - commit requested control to Firmware
* @handle: acpi_handle for the target ACPI object
* @flags: driver's requested control bits
*
* Attempt to take control from Firmware on requested control bits.
......
......@@ -20,9 +20,17 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/usb.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/usb.h>
#ifdef CONFIG_PPC_PMAC
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#endif
#include "usb.h"
#include "hcd.h"
......@@ -277,8 +285,22 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
}
done:
if (retval == 0)
if (retval == 0) {
dev->dev.power.power_state = PMSG_SUSPEND;
#ifdef CONFIG_PPC_PMAC
/* Disable ASIC clocks for USB */
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
of_node = pci_device_to_OF_node (dev);
if (of_node)
pmac_call_feature(PMAC_FTR_USB_ENABLE,
of_node, 0, 0);
}
#endif
}
return retval;
}
EXPORT_SYMBOL (usb_hcd_pci_suspend);
......@@ -301,6 +323,18 @@ int usb_hcd_pci_resume (struct pci_dev *dev)
return 0;
}
#ifdef CONFIG_PPC_PMAC
/* Reenable ASIC clocks for USB */
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
of_node = pci_device_to_OF_node (dev);
if (of_node)
pmac_call_feature (PMAC_FTR_USB_ENABLE,
of_node, 0, 1);
}
#endif
/* NOTE: chip docs cover clean "real suspend" cases (what Linux
* calls "standby", "suspend to RAM", and so on). There are also
* dirty cases when swsusp fakes a suspend in "shutdown" mode.
......
......@@ -1669,7 +1669,6 @@ int usb_suspend_device(struct usb_device *udev)
return 0;
#endif
}
EXPORT_SYMBOL_GPL(usb_suspend_device);
/*
* If the USB "suspend" state is in use (rather than "global suspend"),
......
......@@ -411,50 +411,39 @@ static void ehci_stop (struct usb_hcd *hcd)
dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status));
}
static int ehci_run (struct usb_hcd *hcd)
/* one-time init, only for memory state */
static int ehci_init(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
u32 temp;
int retval;
u32 hcc_params;
int first;
/* skip some things on restart paths */
first = (ehci->watchdog.data == 0);
if (first) {
init_timer (&ehci->watchdog);
spin_lock_init(&ehci->lock);
init_timer(&ehci->watchdog);
ehci->watchdog.function = ehci_watchdog;
ehci->watchdog.data = (unsigned long) ehci;
}
/*
* hw default: 1K periodic list heads, one per frame.
* periodic_size can shrink by USBCMD update if hcc_params allows.
*/
ehci->periodic_size = DEFAULT_I_TDPS;
if (first && (retval = ehci_mem_init (ehci, GFP_KERNEL)) < 0)
if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
return retval;
/* controllers may cache some of the periodic schedule ... */
hcc_params = readl (&ehci->caps->hcc_params);
if (HCC_ISOC_CACHE (hcc_params)) // full frame cache
hcc_params = readl(&ehci->caps->hcc_params);
if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
ehci->i_thresh = 8;
else // N microframes cached
ehci->i_thresh = 2 + HCC_ISOC_THRES (hcc_params);
ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
ehci->reclaim = NULL;
ehci->reclaim_ready = 0;
ehci->next_uframe = -1;
/* controller state: unknown --> reset */
/* EHCI spec section 4.1 */
if ((retval = ehci_reset (ehci)) != 0) {
ehci_mem_cleanup (ehci);
return retval;
}
writel (ehci->periodic_dma, &ehci->regs->frame_list);
/*
* dedicate a qh for the async ring head, since we couldn't unlink
* a 'real' qh without stopping the async schedule [4.8]. use it
......@@ -462,37 +451,13 @@ static int ehci_run (struct usb_hcd *hcd)
* its dummy is used in hw_alt_next of many tds, to prevent the qh
* from automatically advancing to the next td after short reads.
*/
if (first) {
ehci->async->qh_next.qh = NULL;
ehci->async->hw_next = QH_NEXT (ehci->async->qh_dma);
ehci->async->hw_info1 = cpu_to_le32 (QH_HEAD);
ehci->async->hw_token = cpu_to_le32 (QTD_STS_HALT);
ehci->async->hw_next = QH_NEXT(ehci->async->qh_dma);
ehci->async->hw_info1 = cpu_to_le32(QH_HEAD);
ehci->async->hw_token = cpu_to_le32(QTD_STS_HALT);
ehci->async->hw_qtd_next = EHCI_LIST_END;
ehci->async->qh_state = QH_STATE_LINKED;
ehci->async->hw_alt_next = QTD_NEXT (ehci->async->dummy->qtd_dma);
}
writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next);
/*
* hcc_params controls whether ehci->regs->segment must (!!!)
* be used; it constrains QH/ITD/SITD and QTD locations.
* pci_pool consistent memory always uses segment zero.
* streaming mappings for I/O buffers, like pci_map_single(),
* can return segments above 4GB, if the device allows.
*
* NOTE: the dma mask is visible through dma_supported(), so
* drivers can pass this info along ... like NETIF_F_HIGHDMA,
* Scsi_Host.highmem_io, and so forth. It's readonly to all
* host side drivers though.
*/
if (HCC_64BIT_ADDR (hcc_params)) {
writel (0, &ehci->regs->segment);
#if 0
// this is deeply broken on almost all architectures
if (!dma_set_mask (hcd->self.controller, DMA_64BIT_MASK))
ehci_info (ehci, "enabled 64bit DMA\n");
#endif
}
ehci->async->hw_alt_next = QTD_NEXT(ehci->async->dummy->qtd_dma);
/* clear interrupt enables, set irq latency */
if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
......@@ -507,13 +472,13 @@ static int ehci_run (struct usb_hcd *hcd)
* make problems: throughput reduction (!), data errors...
*/
if (park) {
park = min (park, (unsigned) 3);
park = min(park, (unsigned) 3);
temp |= CMD_PARK;
temp |= park << 8;
}
ehci_info (ehci, "park %d\n", park);
ehci_dbg(ehci, "park %d\n", park);
}
if (HCC_PGM_FRAMELISTLEN (hcc_params)) {
if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
/* periodic schedule size can be smaller than default */
temp &= ~(3 << 2);
temp |= (EHCI_TUNE_FLS << 2);
......@@ -521,16 +486,63 @@ static int ehci_run (struct usb_hcd *hcd)
case 0: ehci->periodic_size = 1024; break;
case 1: ehci->periodic_size = 512; break;
case 2: ehci->periodic_size = 256; break;
default: BUG ();
default: BUG();
}
}
ehci->command = temp;
ehci->reboot_notifier.notifier_call = ehci_reboot;
register_reboot_notifier(&ehci->reboot_notifier);
return 0;
}
/* start HC running; it's halted, ehci_init() has been run (once) */
static int ehci_run (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
int retval;
u32 temp;
u32 hcc_params;
/* EHCI spec section 4.1 */
if ((retval = ehci_reset(ehci)) != 0) {
unregister_reboot_notifier(&ehci->reboot_notifier);
ehci_mem_cleanup(ehci);
return retval;
}
writel(ehci->periodic_dma, &ehci->regs->frame_list);
writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
/*
* hcc_params controls whether ehci->regs->segment must (!!!)
* be used; it constrains QH/ITD/SITD and QTD locations.
* pci_pool consistent memory always uses segment zero.
* streaming mappings for I/O buffers, like pci_map_single(),
* can return segments above 4GB, if the device allows.
*
* NOTE: the dma mask is visible through dma_supported(), so
* drivers can pass this info along ... like NETIF_F_HIGHDMA,
* Scsi_Host.highmem_io, and so forth. It's readonly to all
* host side drivers though.
*/
hcc_params = readl(&ehci->caps->hcc_params);
if (HCC_64BIT_ADDR(hcc_params)) {
writel(0, &ehci->regs->segment);
#if 0
// this is deeply broken on almost all architectures
if (!dma_set_mask(hcd->self.controller, DMA_64BIT_MASK))
ehci_info(ehci, "enabled 64bit DMA\n");
#endif
}
// Philips, Intel, and maybe others need CMD_RUN before the
// root hub will detect new devices (why?); NEC doesn't
temp |= CMD_RUN;
writel (temp, &ehci->regs->command);
dbg_cmd (ehci, "init", temp);
/* set async sleep time = 10 us ... ? */
ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
ehci->command |= CMD_RUN;
writel (ehci->command, &ehci->regs->command);
dbg_cmd (ehci, "init", ehci->command);
/*
* Start, enabling full USB 2.0 functionality ... usb 1.1 devices
......@@ -538,26 +550,23 @@ static int ehci_run (struct usb_hcd *hcd)
* involved with the root hub. (Except where one is integrated,
* and there's no companion controller unless maybe for USB OTG.)
*/
if (first) {
ehci->reboot_notifier.notifier_call = ehci_reboot;
register_reboot_notifier (&ehci->reboot_notifier);
}
hcd->state = HC_STATE_RUNNING;
writel (FLAG_CF, &ehci->regs->configured_flag);
readl (&ehci->regs->command); /* unblock posted write */
readl (&ehci->regs->command); /* unblock posted writes */
temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
ehci_info (ehci,
"USB %x.%x %s, EHCI %x.%02x, driver %s\n",
"USB %x.%x started, EHCI %x.%02x, driver %s\n",
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
first ? "initialized" : "restarted",
temp >> 8, temp & 0xff, DRIVER_VERSION);
writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */
if (first)
create_debug_files (ehci);
/* GRR this is run-once init(), being done every time the HC starts.
* So long as they're part of class devices, we can't do it init()
* since the class device isn't created that early.
*/
create_debug_files(ehci);
return 0;
}
......@@ -636,9 +645,8 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
* stop that signaling.
*/
ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
mod_timer (&hcd->rh_timer,
ehci->reset_done [i] + 1);
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
usb_hcd_resume_root_hub(hcd);
}
}
......
......@@ -94,6 +94,13 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
msleep(5);
spin_lock_irq (&ehci->lock);
/* Ideally and we've got a real resume here, and no port's power
* was lost. (For PCI, that means Vaux was maintained.) But we
* could instead be restoring a swsusp snapshot -- so that BIOS was
* the last user of the controller, not reset/pm hardware keeping
* state we gave to it.
*/
/* re-init operational registers in case we lost power */
if (readl (&ehci->regs->intr_enable) == 0) {
/* at least some APM implementations will try to deliver
......
......@@ -27,7 +27,7 @@
/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
* off the controller (maybe it can boot from highspeed USB disks).
*/
static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap)
static int bios_handoff(struct ehci_hcd *ehci, int where, u32 cap)
{
struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
......@@ -48,7 +48,7 @@ static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap)
where, cap);
// some BIOS versions seem buggy...
// return 1;
ehci_warn (ehci, "continuing after BIOS bug...\n");
ehci_warn(ehci, "continuing after BIOS bug...\n");
/* disable all SMIs, and clear "BIOS owns" flag */
pci_write_config_dword(pdev, where + 4, 0);
pci_write_config_byte(pdev, where + 2, 0);
......@@ -58,37 +58,102 @@ static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap)
return 0;
}
/* called by khubd or root hub init threads */
static int ehci_pci_reset (struct usb_hcd *hcd)
/* called after powerup, by probe or system-pm "wakeup" */
static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 temp;
int retval;
unsigned count = 256/4;
spin_lock_init (&ehci->lock);
/* optional debug port, normally in the first BAR */
temp = pci_find_capability(pdev, 0x0a);
if (temp) {
pci_read_config_dword(pdev, temp, &temp);
temp >>= 16;
if ((temp & (3 << 13)) == (1 << 13)) {
temp &= 0x1fff;
ehci->debug = ehci_to_hcd(ehci)->regs + temp;
temp = readl(&ehci->debug->control);
ehci_info(ehci, "debug port %d%s\n",
HCS_DEBUG_PORT(ehci->hcs_params),
(temp & DBGP_ENABLED)
? " IN USE"
: "");
if (!(temp & DBGP_ENABLED))
ehci->debug = NULL;
}
}
temp = HCC_EXT_CAPS(readl(&ehci->caps->hcc_params));
/* EHCI 0.96 and later may have "extended capabilities" */
while (temp && count--) {
u32 cap;
pci_read_config_dword(pdev, temp, &cap);
ehci_dbg(ehci, "capability %04x at %02x\n", cap, temp);
switch (cap & 0xff) {
case 1: /* BIOS/SMM/... handoff */
if (bios_handoff(ehci, temp, cap) != 0)
return -EOPNOTSUPP;
break;
case 0: /* illegal reserved capability */
ehci_dbg(ehci, "illegal capability!\n");
cap = 0;
/* FALLTHROUGH */
default: /* unknown */
break;
}
temp = (cap >> 8) & 0xff;
}
if (!count) {
ehci_err(ehci, "bogus capabilities ... PCI problems!\n");
return -EIO;
}
/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
retval = pci_set_mwi(pdev);
if (!retval)
ehci_dbg(ehci, "MWI active\n");
ehci_port_power(ehci, 0);
return 0;
}
/* called by khubd or root hub (re)init threads; leaves HC in halt state */
static int ehci_pci_reset(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
u32 temp;
int retval;
ehci->caps = hcd->regs;
ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase));
dbg_hcs_params (ehci, "reset");
dbg_hcc_params (ehci, "reset");
ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
dbg_hcs_params(ehci, "reset");
dbg_hcc_params(ehci, "reset");
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = readl (&ehci->caps->hcs_params);
ehci->hcs_params = readl(&ehci->caps->hcs_params);
if (hcd->self.controller->bus == &pci_bus_type) {
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
retval = ehci_halt(ehci);
if (retval)
return retval;
/* NOTE: only the parts below this line are PCI-specific */
switch (pdev->vendor) {
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
ehci->is_tdi_rh_tt = 1;
tdi_reset (ehci);
tdi_reset(ehci);
}
break;
case PCI_VENDOR_ID_AMD:
/* AMD8111 EHCI doesn't work, according to AMD errata */
if (pdev->device == 0x7463) {
ehci_info (ehci, "ignoring AMD8111 (errata)\n");
ehci_info(ehci, "ignoring AMD8111 (errata)\n");
return -EIO;
}
break;
......@@ -104,80 +169,26 @@ static int ehci_pci_reset (struct usb_hcd *hcd)
case 0x00e8: /* CK8S */
if (pci_set_consistent_dma_mask(pdev,
DMA_31BIT_MASK) < 0)
ehci_warn (ehci, "can't enable NVidia "
ehci_warn(ehci, "can't enable NVidia "
"workaround for >2GB RAM\n");
break;
}
break;
}
/* optional debug port, normally in the first BAR */
temp = pci_find_capability (pdev, 0x0a);
if (temp) {
pci_read_config_dword(pdev, temp, &temp);
temp >>= 16;
if ((temp & (3 << 13)) == (1 << 13)) {
temp &= 0x1fff;
ehci->debug = hcd->regs + temp;
temp = readl (&ehci->debug->control);
ehci_info (ehci, "debug port %d%s\n",
HCS_DEBUG_PORT(ehci->hcs_params),
(temp & DBGP_ENABLED)
? " IN USE"
: "");
if (!(temp & DBGP_ENABLED))
ehci->debug = NULL;
}
}
temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params));
} else
temp = 0;
/* EHCI 0.96 and later may have "extended capabilities" */
while (temp && count--) {
u32 cap;
pci_read_config_dword (to_pci_dev(hcd->self.controller),
temp, &cap);
ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp);
switch (cap & 0xff) {
case 1: /* BIOS/SMM/... handoff */
if (bios_handoff (ehci, temp, cap) != 0)
return -EOPNOTSUPP;
break;
case 0: /* illegal reserved capability */
ehci_warn (ehci, "illegal capability!\n");
cap = 0;
/* FALLTHROUGH */
default: /* unknown */
break;
}
temp = (cap >> 8) & 0xff;
}
if (!count) {
ehci_err (ehci, "bogus capabilities ... PCI problems!\n");
return -EIO;
}
if (ehci_is_TDI(ehci))
ehci_reset (ehci);
ehci_port_power (ehci, 0);
ehci_reset(ehci);
/* at least the Genesys GL880S needs fixup here */
temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
temp &= 0x0f;
if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
ehci_dbg (ehci, "bogus port configuration: "
ehci_dbg(ehci, "bogus port configuration: "
"cc=%d x pcc=%d < ports=%d\n",
HCS_N_CC(ehci->hcs_params),
HCS_N_PCC(ehci->hcs_params),
HCS_N_PORTS(ehci->hcs_params));
if (hcd->self.controller->bus == &pci_bus_type) {
struct pci_dev *pdev;
pdev = to_pci_dev(hcd->self.controller);
switch (pdev->vendor) {
case 0x17a0: /* GENESYS */
/* GL880S: should be PORTS=2 */
......@@ -189,44 +200,16 @@ static int ehci_pci_reset (struct usb_hcd *hcd)
break;
}
}
}
/* force HC to halt state */
return ehci_halt (ehci);
}
static int ehci_pci_start (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
int result = 0;
if (hcd->self.controller->bus == &pci_bus_type) {
struct pci_dev *pdev;
u16 port_wake;
pdev = to_pci_dev(hcd->self.controller);
/* Serial Bus Release Number is at PCI 0x60 offset */
pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
/* port wake capability, reported by boot firmware */
pci_read_config_word(pdev, 0x62, &port_wake);
hcd->can_wakeup = (port_wake & 1) != 0;
/* REVISIT: per-port wake capability (PCI 0x62) currently unused */
/* help hc dma work well with cachelines */
result = pci_set_mwi(pdev);
if (result)
ehci_dbg(ehci, "unable to enable MWI - not fatal.\n");
}
retval = ehci_pci_reinit(ehci, pdev);
return ehci_run (hcd);
}
/* always called by thread; normally rmmod */
static void ehci_pci_stop (struct usb_hcd *hcd)
{
ehci_stop (hcd);
/* finish init */
return ehci_init(hcd);
}
/*-------------------------------------------------------------------------*/
......@@ -235,90 +218,88 @@ static void ehci_pci_stop (struct usb_hcd *hcd)
/* suspend/resume, section 4.3 */
/* These routines rely on the bus (pci, platform, etc)
/* These routines rely on the PCI bus glue
* to handle powerdown and wakeup, and currently also on
* transceivers that don't need any software attention to set up
* the right sort of wakeup.
* Also they depend on separate root hub suspend/resume.
*/
static int ehci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
if (time_before (jiffies, ehci->next_statechange))
msleep (100);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
#ifdef CONFIG_USB_SUSPEND
(void) usb_suspend_device (hcd->self.root_hub);
#else
usb_lock_device (hcd->self.root_hub);
(void) ehci_bus_suspend (hcd);
usb_unlock_device (hcd->self.root_hub);
#endif
if (time_before(jiffies, ehci->next_statechange))
msleep(10);
// save (PCI) FLADJ in case of Vaux power loss
// could save FLADJ in case of Vaux power loss
// ... we'd only use it to handle clock skew
return 0;
}
static int ehci_pci_resume (struct usb_hcd *hcd)
static int ehci_pci_resume(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
unsigned port;
struct usb_device *root = hcd->self.root_hub;
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int retval = -EINVAL;
// maybe restore (PCI) FLADJ
// maybe restore FLADJ
if (time_before(jiffies, ehci->next_statechange))
msleep(100);
if (time_before (jiffies, ehci->next_statechange))
msleep (100);
/* If CF is clear, we lost PCI Vaux power and need to restart. */
if (readl(&ehci->regs->configured_flag) != FLAG_CF)
goto restart;
/* If any port is suspended (or owned by the companion),
* we know we can/must resume the HC (and mustn't reset it).
* We just defer that to the root hub code.
*/
for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) {
for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
u32 status;
port--;
status = readl (&ehci->regs->port_status [port]);
status = readl(&ehci->regs->port_status [port]);
if (!(status & PORT_POWER))
continue;
if (status & (PORT_SUSPEND | PORT_OWNER)) {
down (&hcd->self.root_hub->serialize);
retval = ehci_bus_resume (hcd);
up (&hcd->self.root_hub->serialize);
break;
if (status & (PORT_SUSPEND | PORT_RESUME | PORT_OWNER)) {
usb_hcd_resume_root_hub(hcd);
return 0;
}
}
restart:
ehci_dbg(ehci, "lost power, restarting\n");
for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
port--;
if (!root->children [port])
continue;
dbg_port (ehci, __FUNCTION__, port + 1, status);
usb_set_device_state (root->children[port],
usb_set_device_state(root->children[port],
USB_STATE_NOTATTACHED);
}
/* Else reset, to cope with power loss or flush-to-storage
* style "resume" having activated BIOS during reboot.
* style "resume" having let BIOS kick in during reboot.
*/
if (port == 0) {
(void) ehci_halt (ehci);
(void) ehci_reset (ehci);
(void) ehci_pci_reset (hcd);
(void) ehci_halt(ehci);
(void) ehci_reset(ehci);
(void) ehci_pci_reinit(ehci, pdev);
/* emptying the schedule aborts any urbs */
spin_lock_irq (&ehci->lock);
spin_lock_irq(&ehci->lock);
if (ehci->reclaim)
ehci->reclaim_ready = 1;
ehci_work (ehci, NULL);
spin_unlock_irq (&ehci->lock);
ehci_work(ehci, NULL);
spin_unlock_irq(&ehci->lock);
/* restart; khubd will disconnect devices */
retval = ehci_run (hcd);
retval = ehci_run(hcd);
/* here we "know" root ports should always stay powered;
* but some controllers may lose all power.
*/
ehci_port_power (ehci, 1);
}
/* here we "know" root ports should always stay powered */
ehci_port_power(ehci, 1);
return retval;
}
......@@ -339,12 +320,12 @@ static const struct hc_driver ehci_pci_hc_driver = {
* basic lifecycle operations
*/
.reset = ehci_pci_reset,
.start = ehci_pci_start,
.start = ehci_run,
#ifdef CONFIG_PM
.suspend = ehci_pci_suspend,
.resume = ehci_pci_resume,
#endif
.stop = ehci_pci_stop,
.stop = ehci_stop,
/*
* managing i/o requests and associated device resources
......@@ -377,7 +358,7 @@ static const struct pci_device_id pci_ids [] = { {
},
{ /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE (pci, pci_ids);
MODULE_DEVICE_TABLE(pci, pci_ids);
/* pci driver glue; this is a "new style" PCI driver module */
static struct pci_driver ehci_pci_driver = {
......@@ -393,22 +374,22 @@ static struct pci_driver ehci_pci_driver = {
#endif
};
static int __init ehci_hcd_pci_init (void)
static int __init ehci_hcd_pci_init(void)
{
if (usb_disabled())
return -ENODEV;
pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
hcd_name,
sizeof (struct ehci_qh), sizeof (struct ehci_qtd),
sizeof (struct ehci_itd), sizeof (struct ehci_sitd));
sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
return pci_register_driver (&ehci_pci_driver);
return pci_register_driver(&ehci_pci_driver);
}
module_init (ehci_hcd_pci_init);
module_init(ehci_hcd_pci_init);
static void __exit ehci_hcd_pci_cleanup (void)
static void __exit ehci_hcd_pci_cleanup(void)
{
pci_unregister_driver (&ehci_pci_driver);
pci_unregister_driver(&ehci_pci_driver);
}
module_exit (ehci_hcd_pci_cleanup);
module_exit(ehci_hcd_pci_cleanup);
......@@ -14,15 +14,6 @@
* This file is licenced under the GPL.
*/
#include <linux/jiffies.h>
#ifdef CONFIG_PPC_PMAC
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#endif
#ifndef CONFIG_PCI
#error "This file is PCI bus glue. CONFIG_PCI must be defined."
#endif
......@@ -115,39 +106,12 @@ ohci_pci_start (struct usb_hcd *hcd)
static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
{
/* root hub was already suspended */
/* FIXME these PMAC things get called in the wrong places. ASIC
* clocks should be turned off AFTER entering D3, and on BEFORE
* trying to enter D0. Evidently the PCI layer doesn't currently
* provide the right sort of platform hooks for this ...
*/
#ifdef CONFIG_PPC_PMAC
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
/* Disable USB PAD & cell clock */
of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.controller));
if (of_node)
pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0);
}
#endif /* CONFIG_PPC_PMAC */
return 0;
}
static int ohci_pci_resume (struct usb_hcd *hcd)
{
#ifdef CONFIG_PPC_PMAC
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
/* Re-enable USB PAD & cell clock */
of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.controller));
if (of_node)
pmac_call_feature (PMAC_FTR_USB_ENABLE, of_node, 0, 1);
}
#endif /* CONFIG_PPC_PMAC */
usb_hcd_resume_root_hub(hcd);
return 0;
}
......
......@@ -199,7 +199,7 @@ static void sn9c102_release_buffers(struct sn9c102_device* cam)
{
if (cam->nbuffers) {
rvfree(cam->frame[0].bufmem,
cam->nbuffers * cam->frame[0].buf.length);
cam->nbuffers * PAGE_ALIGN(cam->frame[0].buf.length));
cam->nbuffers = 0;
}
}
......
......@@ -475,6 +475,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
......
......@@ -127,6 +127,13 @@
#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
/*
* The following are the values for two KOBIL chipcard terminals.
*/
#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */
#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */
#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */
/*
* DSS-20 Sync Station for Sony Ericsson P800
*/
......
......@@ -46,7 +46,6 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/usb.h>
#include <asm/uaccess.h>
#include "usb-serial.h"
......
......@@ -1118,6 +1118,15 @@ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
/*
* David Hrdeman <david@2gen.com>
* The key makes the SCSI stack print confusing (but harmless) messages
*/
UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100,
"Iomega",
"Micro Mini 1GB",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
#ifdef CONFIG_USB_STORAGE_SDDR55
UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999,
"Sandisk",
......
......@@ -453,12 +453,16 @@ int fb_prepare_logo(struct fb_info *info, int rotate)
/* Return if no suitable logo was found */
fb_logo.logo = fb_find_logo(depth);
if (!fb_logo.logo) {
return 0;
}
if (rotate == FB_ROTATE_UR || rotate == FB_ROTATE_UD)
yres = info->var.yres;
else
yres = info->var.xres;
if (fb_logo.logo && fb_logo.logo->height > yres) {
if (fb_logo.logo->height > yres) {
fb_logo.logo = NULL;
return 0;
}
......
......@@ -668,7 +668,7 @@ static inline int de_thread(struct task_struct *tsk)
if (!thread_group_leader(current)) {
struct task_struct *parent;
struct dentry *proc_dentry1, *proc_dentry2;
unsigned long exit_state, ptrace;
unsigned long ptrace;
/*
* Wait for the thread group leader to be a zombie.
......@@ -726,15 +726,15 @@ static inline int de_thread(struct task_struct *tsk)
list_del(&current->tasks);
list_add_tail(&current->tasks, &init_task.tasks);
current->exit_signal = SIGCHLD;
exit_state = leader->exit_state;
BUG_ON(leader->exit_state != EXIT_ZOMBIE);
leader->exit_state = EXIT_DEAD;
write_unlock_irq(&tasklist_lock);
spin_unlock(&leader->proc_lock);
spin_unlock(&current->proc_lock);
proc_pid_flush(proc_dentry1);
proc_pid_flush(proc_dentry2);
BUG_ON(exit_state != EXIT_ZOMBIE);
}
/*
......
......@@ -82,28 +82,28 @@
do { \
printk(JFFS2_ERR_MSG_PREFIX \
" (%d) %s: " fmt, current->pid, \
__FUNCTION__, ##__VA_ARGS__); \
__FUNCTION__ , ##__VA_ARGS__); \
} while(0)
#define JFFS2_WARNING(fmt, ...) \
do { \
printk(JFFS2_WARN_MSG_PREFIX \
" (%d) %s: " fmt, current->pid, \
__FUNCTION__, ##__VA_ARGS__); \
__FUNCTION__ , ##__VA_ARGS__); \
} while(0)
#define JFFS2_NOTICE(fmt, ...) \
do { \
printk(JFFS2_NOTICE_MSG_PREFIX \
" (%d) %s: " fmt, current->pid, \
__FUNCTION__, ##__VA_ARGS__); \
__FUNCTION__ , ##__VA_ARGS__); \
} while(0)
#define JFFS2_DEBUG(fmt, ...) \
do { \
printk(JFFS2_DBG_MSG_PREFIX \
" (%d) %s: " fmt, current->pid, \
__FUNCTION__, ##__VA_ARGS__); \
__FUNCTION__ , ##__VA_ARGS__); \
} while(0)
/*
......
......@@ -118,8 +118,6 @@ static __inline__ long atomic_add_return(int i, atomic_t * v)
return result;
}
#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
static __inline__ long atomic64_add_return(long i, atomic64_t * v)
{
long temp, result;
......@@ -189,6 +187,9 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
})
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0)
#define atomic_dec_return(v) atomic_sub_return(1,(v))
#define atomic64_dec_return(v) atomic64_sub_return(1,(v))
......@@ -199,6 +200,8 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0)
#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
#define atomic64_inc_and_test(v) (atomic64_add_return(1, (v)) == 0)
#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0)
......
......@@ -4,7 +4,7 @@
* IOP3xx architecture timex specifications
*/
#include <linux/config.h>
#include <asm/hardware.h>
#if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244)
......
......@@ -135,9 +135,9 @@ extern unsigned int HPAGE_SHIFT;
#define in_hugepage_area(context, addr) \
(cpu_has_feature(CPU_FTR_16M_PAGE) && \
( ((1 << GET_HTLB_AREA(addr)) & (context).high_htlb_areas) || \
( ((addr) < 0x100000000L) && \
((1 << GET_ESID(addr)) & (context).low_htlb_areas) ) ) )
( ( (addr) >= 0x100000000UL) \
? ((1 << GET_HTLB_AREA(addr)) & (context).high_htlb_areas) \
: ((1 << GET_ESID(addr)) & (context).low_htlb_areas) ) )
#else /* !CONFIG_HUGETLB_PAGE */
......
......@@ -54,6 +54,7 @@ extern int atomic64_sub_ret(int, atomic64_t *);
* other cases.
*/
#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
#define atomic_sub_and_test(i, v) (atomic_sub_ret(i, v) == 0)
#define atomic64_sub_and_test(i, v) (atomic64_sub_ret(i, v) == 0)
......
......@@ -160,8 +160,8 @@ static __inline__ int atomic_inc_and_test(atomic_t *v)
/**
* atomic_add_negative - add and test if negative
* @v: pointer of type atomic_t
* @i: integer value to add
* @v: pointer of type atomic_t
*
* Atomically adds @i to @v and returns true
* if the result is negative, or false when
......@@ -178,6 +178,31 @@ static __inline__ int atomic_add_negative(int i, atomic_t *v)
return c;
}
/**
* atomic_add_return - add and return
* @i: integer value to add
* @v: pointer of type atomic_t
*
* Atomically adds @i to @v and returns @i + @v
*/
static __inline__ int atomic_add_return(int i, atomic_t *v)
{
int __i = i;
__asm__ __volatile__(
LOCK "xaddl %0, %1;"
:"=r"(i)
:"m"(v->counter), "0"(i));
return i + __i;
}
static __inline__ int atomic_sub_return(int i, atomic_t *v)
{
return atomic_add_return(-i,v);
}
#define atomic_inc_return(v) (atomic_add_return(1,v))
#define atomic_dec_return(v) (atomic_sub_return(1,v))
/* An 64bit atomic type */
typedef struct { volatile long counter; } atomic64_t;
......@@ -320,14 +345,14 @@ static __inline__ int atomic64_inc_and_test(atomic64_t *v)
/**
* atomic64_add_negative - add and test if negative
* @v: pointer to atomic64_t
* @i: integer value to add
* @v: pointer to type atomic64_t
*
* Atomically adds @i to @v and returns true
* if the result is negative, or false when
* result is greater than or equal to zero.
*/
static __inline__ long atomic64_add_negative(long i, atomic64_t *v)
static __inline__ int atomic64_add_negative(long i, atomic64_t *v)
{
unsigned char c;
......@@ -339,27 +364,30 @@ static __inline__ long atomic64_add_negative(long i, atomic64_t *v)
}
/**
* atomic_add_return - add and return
* @v: pointer of type atomic_t
* atomic64_add_return - add and return
* @i: integer value to add
* @v: pointer to type atomic64_t
*
* Atomically adds @i to @v and returns @i + @v
*/
static __inline__ int atomic_add_return(int i, atomic_t *v)
static __inline__ long atomic64_add_return(long i, atomic64_t *v)
{
int __i = i;
long __i = i;
__asm__ __volatile__(
LOCK "xaddl %0, %1;"
LOCK "xaddq %0, %1;"
:"=r"(i)
:"m"(v->counter), "0"(i));
return i + __i;
}
static __inline__ int atomic_sub_return(int i, atomic_t *v)
static __inline__ long atomic64_sub_return(long i, atomic64_t *v)
{
return atomic_add_return(-i,v);
return atomic64_add_return(-i,v);
}
#define atomic64_inc_return(v) (atomic64_add_return(1,v))
#define atomic64_dec_return(v) (atomic64_sub_return(1,v))
#define atomic_cmpxchg(v, old, new) ((int)cmpxchg(&((v)->counter), old, new))
/**
......@@ -381,9 +409,6 @@ static __inline__ int atomic_sub_return(int i, atomic_t *v)
})
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
#define atomic_inc_return(v) (atomic_add_return(1,v))
#define atomic_dec_return(v) (atomic_sub_return(1,v))
/* These are x86-specific, used by some header files */
#define atomic_clear_mask(mask, addr) \
__asm__ __volatile__(LOCK "andl %0,%1" \
......
......@@ -94,13 +94,7 @@ void smp_prepare_boot_cpu(void);
*/
#define raw_smp_processor_id() 0
#define hard_smp_processor_id() 0
static inline int smp_call_function(void (*func) (void *info), void *info,
int retry, int wait)
{
return 0;
}
#define smp_call_function(func,info,retry,wait) ({ 0; })
#define on_each_cpu(func,info,retry,wait) ({ func(info); 0; })
static inline void smp_send_reschedule(int cpu) { }
#define num_booting_cpus() 1
......
......@@ -47,6 +47,7 @@ struct usb_driver;
* @urb_list: urbs queued to this endpoint; maintained by usbcore
* @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
* with one or more transfer descriptors (TDs) per urb
* @kobj: kobject for sysfs info
* @extra: descriptors following this endpoint in the configuration
* @extralen: how many bytes of "extra" are valid
*
......
......@@ -201,21 +201,6 @@ static int get_futex_key(unsigned long uaddr, union futex_key *key)
* from swap. But that's a lot of code to duplicate here
* for a rare case, so we simply fetch the page.
*/
/*
* Do a quick atomic lookup first - this is the fastpath.
*/
page = follow_page(mm, uaddr, FOLL_TOUCH|FOLL_GET);
if (likely(page != NULL)) {
key->shared.pgoff =
page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
put_page(page);
return 0;
}
/*
* Do it the general way.
*/
err = get_user_pages(current, mm, uaddr, 1, 0, 0, &page, NULL);
if (err >= 0) {
key->shared.pgoff =
......
......@@ -36,6 +36,9 @@ void synchronize_irq(unsigned int irq)
{
struct irq_desc *desc = irq_desc + irq;
if (irq >= NR_IRQS)
return;
while (desc->status & IRQ_INPROGRESS)
cpu_relax();
}
......@@ -60,6 +63,9 @@ void disable_irq_nosync(unsigned int irq)
irq_desc_t *desc = irq_desc + irq;
unsigned long flags;
if (irq >= NR_IRQS)
return;
spin_lock_irqsave(&desc->lock, flags);
if (!desc->depth++) {
desc->status |= IRQ_DISABLED;
......@@ -86,6 +92,9 @@ void disable_irq(unsigned int irq)
{
irq_desc_t *desc = irq_desc + irq;
if (irq >= NR_IRQS)
return;
disable_irq_nosync(irq);
if (desc->action)
synchronize_irq(irq);
......@@ -108,6 +117,9 @@ void enable_irq(unsigned int irq)
irq_desc_t *desc = irq_desc + irq;
unsigned long flags;
if (irq >= NR_IRQS)
return;
spin_lock_irqsave(&desc->lock, flags);
switch (desc->depth) {
case 0:
......@@ -163,6 +175,9 @@ int setup_irq(unsigned int irq, struct irqaction * new)
unsigned long flags;
int shared = 0;
if (irq >= NR_IRQS)
return -EINVAL;
if (desc->handler == &no_irq_type)
return -ENOSYS;
/*
......
......@@ -956,7 +956,7 @@ int unregister_console(struct console *console)
if (console_drivers == console) {
console_drivers=console->next;
res = 0;
} else {
} else if (console_drivers) {
for (a=console_drivers->next, b=console_drivers ;
a; b=a, a=b->next) {
if (a == console) {
......
......@@ -125,12 +125,10 @@ comment "Memory hotplug is currently incompatible with Software Suspend"
# space can be handled with less contention: split it at this NR_CPUS.
# Default to 4 for wider testing, though 8 might be more appropriate.
# ARM's adjust_pte (unused if VIPT) depends on mm-wide page_table_lock.
# PA-RISC's debug spinlock_t is too large for the 32-bit struct page.
# ARM26 and SPARC32 and PPC64 may use one page for multiple page tables.
# PA-RISC 7xxx's spinlock_t would enlarge struct page from 32 to 44 bytes.
#
config SPLIT_PTLOCK_CPUS
int
default "4096" if ARM && !CPU_CACHE_VIPT
default "4096" if PARISC && DEBUG_SPINLOCK && !64BIT
default "4096" if ARM26 || SPARC32 || PPC64
default "4096" if PARISC && !PA20
default "4"
......@@ -282,8 +282,8 @@ int invalidate_inode_pages2_range(struct address_space *mapping,
* Zap the rest of the file in one hit.
*/
unmap_mapping_range(mapping,
page_index << PAGE_CACHE_SHIFT,
(end - page_index + 1)
(loff_t)page_index<<PAGE_CACHE_SHIFT,
(loff_t)(end - page_index + 1)
<< PAGE_CACHE_SHIFT,
0);
did_range_unmap = 1;
......@@ -292,7 +292,7 @@ int invalidate_inode_pages2_range(struct address_space *mapping,
* Just zap this page
*/
unmap_mapping_range(mapping,
page_index << PAGE_CACHE_SHIFT,
(loff_t)page_index<<PAGE_CACHE_SHIFT,
PAGE_CACHE_SIZE, 0);
}
}
......
......@@ -366,6 +366,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev)
spin_lock_bh(&br->lock);
br_stp_recalculate_bridge_id(br);
br_features_recompute(br);
if ((br->dev->flags & IFF_UP)
&& (dev->flags & IFF_UP) && netif_carrier_ok(dev))
br_stp_enable_port(p);
......
......@@ -27,6 +27,7 @@
#include <linux/errno.h>
#include <linux/netlink.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <linux/netfilter.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment