Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 - New drivers for ADC128D818, LTC2945, LTC4260, and LTC4222
 - Added support for LTM4676 to ltc2978 driver
 - Converted several drivers to use devm_hwmon_device_register_with_groups
 - Various cleanup in several drivers

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (36 commits)
  hwmon: (pmbus/ltc2978) Add support for LTM4676
  hwmon: (pmbus/ltc2978) Add new chip ID for LTC2974
  hwmon: Do not accept invalid name attributes
  hwmon: (max6639) Use SIMPLE_DEV_PM_OPS macro
  hwmon: (lm95245) Make temp2_crit_hyst read-only
  hwmon: (lm95245) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm95245) Drop useless debug message
  hwmon: (lm95245) Fix hysteresis temperatures
  hwmon: (max6639) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (max6639) Introduce local dev variable, and reduce noisiness
  hwmon: (max6650) Introduce local 'dev' variable
  hwmon: (max6650) Drop error message after memory allocation failures
  hwmon: (max6650) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (max6650) Rearrange code to no longer require forward declarations
  hwmon: (ltc4215) Convert to devm_hwmon_device_register_with_groups
  hwmon: (coretemp) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (coretemp) Allocate platform data with devm_kzalloc
  hwmon: (coretemp) Use sysfs_create_group to create sysfs attributes
  hwmon: (ltc4245) Remove devicetree conditionals
  hwmon: (ltc4245) Drop debug messages
  ...

Documentation/hwmon/adc128d818

+Kernel driver adc128d818
+========================
+
+Supported chips:
+  * Texas Instruments ADC818D818
+    Prefix: 'adc818d818'
+    Addresses scanned: I2C 0x1d, 0x1e, 0x1f, 0x2d, 0x2e, 0x2f
+    Datasheet: Publicly available at the TI website
+               http://www.ti.com/
+
+Author: Guenter Roeck
+
+Description
+-----------
+
+This driver implements support for the Texas Instruments ADC128D818.
+It is described as 'ADC System Monitor with Temperature Sensor'.
+
+The ADC128D818 implements one temperature sensor and seven voltage sensors.
+
+Temperatures are measured in degrees Celsius. There is one set of limits.
+When the HOT Temperature Limit is crossed, this will cause an alarm that will
+be reasserted until the temperature drops below the HOT Hysteresis.
+Measurements are guaranteed between -55 and +125 degrees. The temperature
+measurement has a resolution of 0.5 degrees; the limits have a resolution
+of 1 degree.
+
+Voltage sensors (also known as IN sensors) report their values in volts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. All voltage
+inputs can measure voltages between 0 and 2.55 volts, with a resolution
+of 0.625 mV.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared by the time the alarm is read. The driver
+caches the alarm status for each sensor until it is at least reported
+once, to ensure that alarms are reported to user space.
+
+The ADC128D818 only updates its values approximately once per second;
+reading it more often will do no harm, but will return 'old' values.
+
+In addition to the scanned address list, the chip can also be configured for
+addresses 0x35 to 0x37. Those addresses are not scanned. You have to instantiate
+the driver explicitly if the chip is configured for any of those addresses in
+your system.

Documentation/hwmon/lm95245

@@ -24,8 +24,12 @@ is given within a range of -127 to +127.875 degrees. Remote temperatures are
 given within a range of -127 to +255 degrees. Resolution depends on
 temperature input and range.
 
-Each sensor has its own critical limit, but the hysteresis is common to all
-two channels.
+Each sensor has its own critical limit. Additionally, there is a relative
+hysteresis value common to both critical limits. To make life easier to
+user-space applications, two absolute values are exported, one for each
+channel, but these values are of course linked. Only the local hysteresis
+can be set from user-space, and the same delta applies to the remote
+hysteresis.
 
 The lm95245 driver can change its update interval to a fixed set of values.
 It will round up to the next selectable interval. See the datasheet for exact

Documentation/hwmon/ltc2945

+Kernel driver ltc2945
+=====================
+
+Supported chips:
+  * Linear Technology LTC2945
+    Prefix: 'ltc2945'
+    Addresses scanned: -
+    Datasheet:
+        http://cds.linear.com/docs/en/datasheet/2945fa.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+The LTC2945  is a rail-to-rail system monitor that measures current, voltage,
+and power consumption.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for LTC2945 devices, since there is no register
+which can be safely used to identify the chip. You will have to instantiate
+the devices explicitly.
+
+Example: the following will load the driver for an LTC2945 at address 0x10
+on I2C bus #1:
+$ modprobe ltc2945
+$ echo ltc2945 0x10 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs entries
+-------------
+
+Voltage readings provided by this driver are reported as obtained from the ADC
+registers. If a set of voltage divider resistors is installed, calculate the
+real voltage by multiplying the reported value with (R1+R2)/R2, where R1 is the
+value of the divider resistor against the measured voltage and R2 is the value
+of the divider resistor against Ground.
+
+Current reading provided by this driver is reported as obtained from the ADC
+Current Sense register. The reported value assumes that a 1 mOhm sense resistor
+is installed. If a different sense resistor is installed, calculate the real
+current by dividing the reported value by the sense resistor value in mOhm.
+
+in1_input		VIN voltage (mV). Voltage is measured either at
+			SENSE+ or VDD pin depending on chip configuration.
+in1_min			Undervoltage threshold
+in1_max			Overvoltage threshold
+in1_lowest		Lowest measured voltage
+in1_highest		Highest measured voltage
+in1_reset_history	Write 1 to reset in1 history
+in1_min_alarm		Undervoltage alarm
+in1_max_alarm		Overvoltage alarm
+
+in2_input		ADIN voltage (mV)
+in2_min			Undervoltage threshold
+in2_max			Overvoltage threshold
+in2_lowest		Lowest measured voltage
+in2_highest		Highest measured voltage
+in2_reset_history	Write 1 to reset in2 history
+in2_min_alarm		Undervoltage alarm
+in2_max_alarm		Overvoltage alarm
+
+curr1_input		SENSE current (mA)
+curr1_min		Undercurrent threshold
+curr1_max		Overcurrent threshold
+curr1_lowest		Lowest measured current
+curr1_highest		Highest measured current
+curr1_reset_history	Write 1 to reset curr1 history
+curr1_min_alarm		Undercurrent alarm
+curr1_max_alarm		Overcurrent alarm
+
+power1_input		Power (in uW). Power is calculated based on SENSE+/VDD
+			voltage or ADIN voltage depending on chip configuration.
+power1_min		Low lower threshold
+power1_max		High power threshold
+power1_input_lowest	Historical minimum power use
+power1_input_highest	Historical maximum power use
+power1_reset_history	Write 1 to reset power1 history
+power1_min_alarm	Low power alarm
+power1_max_alarm	High power alarm

Documentation/hwmon/ltc2978

@@ -23,6 +23,10 @@ Supported chips:
     Prefix: 'ltc3883'
     Addresses scanned: -
     Datasheet: http://www.linear.com/product/ltc3883
+  * Linear Technology LTM4676
+    Prefix: 'ltm4676'
+    Addresses scanned: -
+    Datasheet: http://www.linear.com/product/ltm4676
 
 Author: Guenter Roeck <linux@roeck-us.net>
 
@@ -33,7 +37,8 @@ Description
 LTC2974 is a quad digital power supply manager. LTC2978 is an octal power supply
 monitor. LTC2977 is a pin compatible replacement for LTC2978. LTC3880 is a dual
 output poly-phase step-down DC/DC controller. LTC3883 is a single phase
-step-down DC/DC controller.
+step-down DC/DC controller. LTM4676 is a dual 13A or single 26A uModule
+regulator.
 
 
 Usage Notes
@@ -75,7 +80,7 @@ in[N]_label		"vout[1-8]".
 			LTC2974: N=2-5
 			LTC2977: N=2-9
 			LTC2978: N=2-9
-			LTC3880: N=2-3
+			LTC3880, LTM4676: N=2-3
 			LTC3883: N=2
 in[N]_input		Measured output voltage.
 in[N]_min		Minimum output voltage.
@@ -95,7 +100,7 @@ temp[N]_input		Measured temperature.
 			and temp5 reports the chip temperature.
 			On LTC2977 and LTC2978, only one temperature measurement
 			is supported and reports the chip temperature.
-			On LTC3880, temp1 and temp2 report external
+			On LTC3880 and LTM4676, temp1 and temp2 report external
 			temperatures, and temp3 reports the chip temperature.
 			On LTC3883, temp1 reports an external temperature,
 			and temp2 reports the chip temperature.
@@ -123,11 +128,11 @@ power[N]_label		"pout[1-4]".
 			LTC2974: N=1-4
 			LTC2977: Not supported
 			LTC2978: Not supported
-			LTC3880: N=1-2
+			LTC3880, LTM4676: N=1-2
 			LTC3883: N=2
 power[N]_input		Measured output power.
 
-curr1_label		"iin". LTC3880 and LTC3883 only.
+curr1_label		"iin". LTC3880, LTC3883, and LTM4676 only.
 curr1_input		Measured input current.
 curr1_max		Maximum input current.
 curr1_max_alarm		Input current high alarm.
@@ -138,7 +143,7 @@ curr[N]_label		"iout[1-4]".
 			LTC2974: N=1-4
 			LTC2977: not supported
 			LTC2978: not supported
-			LTC3880: N=2-3
+			LTC3880, LTM4676: N=2-3
 			LTC3883: N=2
 curr[N]_input		Measured output current.
 curr[N]_max		Maximum output current.

Documentation/hwmon/ltc4260

+Kernel driver ltc4260
+=====================
+
+Supported chips:
+  * Linear Technology LTC4260
+    Prefix: 'ltc4260'
+    Addresses scanned: -
+    Datasheet:
+        http://cds.linear.com/docs/en/datasheet/4260fc.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+The LTC4260 Hot Swap controller allows a board to be safely inserted
+and removed from a live backplane.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for LTC4260 devices, since there is no register
+which can be safely used to identify the chip. You will have to instantiate
+the devices explicitly.
+
+Example: the following will load the driver for an LTC4260 at address 0x10
+on I2C bus #1:
+$ modprobe ltc4260
+$ echo ltc4260 0x10 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs entries
+-------------
+
+Voltage readings provided by this driver are reported as obtained from the ADC
+registers. If a set of voltage divider resistors is installed, calculate the
+real voltage by multiplying the reported value with (R1+R2)/R2, where R1 is the
+value of the divider resistor against the measured voltage and R2 is the value
+of the divider resistor against Ground.
+
+Current reading provided by this driver is reported as obtained from the ADC
+Current Sense register. The reported value assumes that a 1 mOhm sense resistor
+is installed. If a different sense resistor is installed, calculate the real
+current by dividing the reported value by the sense resistor value in mOhm.
+
+in1_input		SOURCE voltage (mV)
+in1_min_alarm		Undervoltage alarm
+in1_max_alarm		Overvoltage alarm
+
+in2_input		ADIN voltage (mV)
+in2_alarm		Power bad alarm
+
+curr1_input		SENSE current (mA)
+curr1_alarm		SENSE overcurrent alarm

drivers/hwmon/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
 obj-$(CONFIG_SENSORS_AD7314)	+= ad7314.o
 obj-$(CONFIG_SENSORS_AD7414)	+= ad7414.o
 obj-$(CONFIG_SENSORS_AD7418)	+= ad7418.o
+obj-$(CONFIG_SENSORS_ADC128D818) += adc128d818.o
 obj-$(CONFIG_SENSORS_ADCXX)	+= adcxx.o
 obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
 obj-$(CONFIG_SENSORS_ADM1025)	+= adm1025.o
@@ -95,9 +96,12 @@ obj-$(CONFIG_SENSORS_LM93)	+= lm93.o
 obj-$(CONFIG_SENSORS_LM95234)	+= lm95234.o
 obj-$(CONFIG_SENSORS_LM95241)	+= lm95241.o
 obj-$(CONFIG_SENSORS_LM95245)	+= lm95245.o
+obj-$(CONFIG_SENSORS_LTC2945)	+= ltc2945.o
 obj-$(CONFIG_SENSORS_LTC4151)	+= ltc4151.o
 obj-$(CONFIG_SENSORS_LTC4215)	+= ltc4215.o
+obj-$(CONFIG_SENSORS_LTC4222)	+= ltc4222.o
 obj-$(CONFIG_SENSORS_LTC4245)	+= ltc4245.o
+obj-$(CONFIG_SENSORS_LTC4260)	+= ltc4260.o
 obj-$(CONFIG_SENSORS_LTC4261)	+= ltc4261.o
 obj-$(CONFIG_SENSORS_MAX1111)	+= max1111.o
 obj-$(CONFIG_SENSORS_MAX16065)	+= max16065.o

drivers/hwmon/coretemp.c

@@ -94,6 +94,8 @@ struct temp_data {
 	bool valid;
 	struct sensor_device_attribute sd_attrs[TOTAL_ATTRS];
 	char attr_name[TOTAL_ATTRS][CORETEMP_NAME_LENGTH];
+	struct attribute *attrs[TOTAL_ATTRS + 1];
+	struct attribute_group attr_group;
 	struct mutex update_lock;
 };
 
@@ -114,12 +116,6 @@ struct pdev_entry {
 static LIST_HEAD(pdev_list);
 static DEFINE_MUTEX(pdev_list_mutex);
 
-static ssize_t show_name(struct device *dev,
-			struct device_attribute *devattr, char *buf)
-{
-	return sprintf(buf, "%s\n", DRVNAME);
-}
-
 static ssize_t show_label(struct device *dev,
 				struct device_attribute *devattr, char *buf)
 {
@@ -393,20 +389,10 @@ static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
 	return adjust_tjmax(c, id, dev);
 }
 
-static int create_name_attr(struct platform_data *pdata,
-				      struct device *dev)
-{
-	sysfs_attr_init(&pdata->name_attr.attr);
-	pdata->name_attr.attr.name = "name";
-	pdata->name_attr.attr.mode = S_IRUGO;
-	pdata->name_attr.show = show_name;
-	return device_create_file(dev, &pdata->name_attr);
-}
-
 static int create_core_attrs(struct temp_data *tdata, struct device *dev,
 			     int attr_no)
 {
-	int err, i;
+	int i;
 	static ssize_t (*const rd_ptr[TOTAL_ATTRS]) (struct device *dev,
 			struct device_attribute *devattr, char *buf) = {
 			show_label, show_crit_alarm, show_temp, show_tjmax,
@@ -424,16 +410,10 @@ static int create_core_attrs(struct temp_data *tdata, struct device *dev,
 		tdata->sd_attrs[i].dev_attr.attr.mode = S_IRUGO;
 		tdata->sd_attrs[i].dev_attr.show = rd_ptr[i];
 		tdata->sd_attrs[i].index = attr_no;
-		err = device_create_file(dev, &tdata->sd_attrs[i].dev_attr);
-		if (err)
-			goto exit_free;
+		tdata->attrs[i] = &tdata->sd_attrs[i].dev_attr.attr;
 	}
-	return 0;
-
-exit_free:
-	while (--i >= 0)
-		device_remove_file(dev, &tdata->sd_attrs[i].dev_attr);
-	return err;
+	tdata->attr_group.attrs = tdata->attrs;
+	return sysfs_create_group(&dev->kobj, &tdata->attr_group);
 }
 
 
@@ -548,7 +528,7 @@ static int create_core_data(struct platform_device *pdev, unsigned int cpu,
 	pdata->core_data[attr_no] = tdata;
 
 	/* Create sysfs interfaces */
-	err = create_core_attrs(tdata, &pdev->dev, attr_no);
+	err = create_core_attrs(tdata, pdata->hwmon_dev, attr_no);
 	if (err)
 		goto exit_free;
 
@@ -573,14 +553,12 @@ static void coretemp_add_core(unsigned int cpu, int pkg_flag)
 }
 
 static void coretemp_remove_core(struct platform_data *pdata,
-				struct device *dev, int indx)
+				 int indx)
 {
-	int i;
 	struct temp_data *tdata = pdata->core_data[indx];
 
 	/* Remove the sysfs attributes */
-	for (i = 0; i < tdata->attr_size; i++)
-		device_remove_file(dev, &tdata->sd_attrs[i].dev_attr);
+	sysfs_remove_group(&pdata->hwmon_dev->kobj, &tdata->attr_group);
 
 	kfree(pdata->core_data[indx]);
 	pdata->core_data[indx] = NULL;
@@ -588,34 +566,20 @@ static void coretemp_remove_core(struct platform_data *pdata,
 
 static int coretemp_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct platform_data *pdata;
-	int err;
 
 	/* Initialize the per-package data structures */
-	pdata = kzalloc(sizeof(struct platform_data), GFP_KERNEL);
+	pdata = devm_kzalloc(dev, sizeof(struct platform_data), GFP_KERNEL);
 	if (!pdata)
 		return -ENOMEM;
 
-	err = create_name_attr(pdata, &pdev->dev);
-	if (err)
-		goto exit_free;
-
 	pdata->phys_proc_id = pdev->id;
 	platform_set_drvdata(pdev, pdata);
 
-	pdata->hwmon_dev = hwmon_device_register(&pdev->dev);
-	if (IS_ERR(pdata->hwmon_dev)) {
-		err = PTR_ERR(pdata->hwmon_dev);
-		dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
-		goto exit_name;
-	}
-	return 0;
-
-exit_name:
-	device_remove_file(&pdev->dev, &pdata->name_attr);
-exit_free:
-	kfree(pdata);
-	return err;
+	pdata->hwmon_dev = devm_hwmon_device_register_with_groups(dev, DRVNAME,
+								  pdata, NULL);
+	return PTR_ERR_OR_ZERO(pdata->hwmon_dev);
 }
 
 static int coretemp_remove(struct platform_device *pdev)
@@ -625,11 +589,8 @@ static int coretemp_remove(struct platform_device *pdev)
 
 	for (i = MAX_CORE_DATA - 1; i >= 0; --i)
 		if (pdata->core_data[i])
-			coretemp_remove_core(pdata, &pdev->dev, i);
+			coretemp_remove_core(pdata, i);
 
-	device_remove_file(&pdev->dev, &pdata->name_attr);
-	hwmon_device_unregister(pdata->hwmon_dev);
-	kfree(pdata);
 	return 0;
 }
 
@@ -777,7 +738,7 @@ static void put_core_offline(unsigned int cpu)
 		return;
 
 	if (pdata->core_data[indx] && pdata->core_data[indx]->cpu == cpu)
-		coretemp_remove_core(pdata, &pdev->dev, indx);
+		coretemp_remove_core(pdata, indx);
 
 	/*
 	 * If a HT sibling of a core is taken offline, but another HT sibling

drivers/hwmon/emc2103.c

@@ -349,7 +349,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,
 		dev_dbg(&client->dev, "reg 0x%02x, err %d\n",
 			REG_FAN_CONF1, status);
 		mutex_unlock(&data->update_lock);
-		return -EIO;
+		return status;
 	}
 	status &= 0x9F;
 	status |= (new_range_bits << 5);

drivers/hwmon/hwmon.c

@@ -22,6 +22,7 @@
 #include <linux/gfp.h>
 #include <linux/spinlock.h>
 #include <linux/pci.h>
+#include <linux/string.h>
 
 #define HWMON_ID_PREFIX "hwmon"
 #define HWMON_ID_FORMAT HWMON_ID_PREFIX "%d"
@@ -99,6 +100,10 @@ hwmon_device_register_with_groups(struct device *dev, const char *name,
 	struct hwmon_device *hwdev;
 	int err, id;
 
+	/* Do not accept invalid characters in hwmon name attribute */
+	if (name && (!strlen(name) || strpbrk(name, "-* \t\n")))
+		return ERR_PTR(-EINVAL);
+
 	id = ida_simple_get(&hwmon_ida, 0, 0, GFP_KERNEL);
 	if (id < 0)
 		return ERR_PTR(id);

drivers/hwmon/iio_hwmon.c

@@ -31,6 +31,7 @@ struct iio_hwmon_state {
 	int num_channels;
 	struct device *hwmon_dev;
 	struct attribute_group attr_group;
+	const struct attribute_group *groups[2];
 	struct attribute **attrs;
 };
 
@@ -56,19 +57,6 @@ static ssize_t iio_hwmon_read_val(struct device *dev,
 	return sprintf(buf, "%d\n", result);
 }
 
-static ssize_t show_name(struct device *dev, struct device_attribute *attr,
-			 char *buf)
-{
-	const char *name = "iio_hwmon";
-
-	if (dev->of_node && dev->of_node->name)
-		name = dev->of_node->name;
-
-	return sprintf(buf, "%s\n", name);
-}
-
-static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-
 static int iio_hwmon_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -78,6 +66,10 @@ static int iio_hwmon_probe(struct platform_device *pdev)
 	int in_i = 1, temp_i = 1, curr_i = 1;
 	enum iio_chan_type type;
 	struct iio_channel *channels;
+	const char *name = "iio_hwmon";
+
+	if (dev->of_node && dev->of_node->name)
+		name = dev->of_node->name;
 
 	channels = iio_channel_get_all(dev);
 	if (IS_ERR(channels))
@@ -96,7 +88,7 @@ static int iio_hwmon_probe(struct platform_device *pdev)
 		st->num_channels++;
 
 	st->attrs = devm_kzalloc(dev,
-				 sizeof(*st->attrs) * (st->num_channels + 2),
+				 sizeof(*st->attrs) * (st->num_channels + 1),
 				 GFP_KERNEL);
 	if (st->attrs == NULL) {
 		ret = -ENOMEM;
@@ -144,22 +136,18 @@ static int iio_hwmon_probe(struct platform_device *pdev)
 		a->index = i;
 		st->attrs[i] = &a->dev_attr.attr;
 	}
-	st->attrs[st->num_channels] = &dev_attr_name.attr;
-	st->attr_group.attrs = st->attrs;
-	platform_set_drvdata(pdev, st);
-	ret = sysfs_create_group(&dev->kobj, &st->attr_group);
-	if (ret < 0)
-		goto error_release_channels;
 
-	st->hwmon_dev = hwmon_device_register(dev);
+	st->attr_group.attrs = st->attrs;
+	st->groups[0] = &st->attr_group;
+	st->hwmon_dev = hwmon_device_register_with_groups(dev, name, st,
+							  st->groups);
 	if (IS_ERR(st->hwmon_dev)) {
 		ret = PTR_ERR(st->hwmon_dev);
-		goto error_remove_group;
+		goto error_release_channels;
 	}
+	platform_set_drvdata(pdev, st);
 	return 0;
 
-error_remove_group:
-	sysfs_remove_group(&dev->kobj, &st->attr_group);
 error_release_channels:
 	iio_channel_release_all(channels);
 	return ret;
@@ -170,7 +158,6 @@ static int iio_hwmon_remove(struct platform_device *pdev)
 	struct iio_hwmon_state *st = platform_get_drvdata(pdev);
 
 	hwmon_device_unregister(st->hwmon_dev);
-	sysfs_remove_group(&pdev->dev.kobj, &st->attr_group);
 	iio_channel_release_all(st->channels);
 
 	return 0;

drivers/hwmon/jz4740-hwmon.c

@@ -28,7 +28,6 @@
 #include <linux/hwmon.h>
 
 struct jz4740_hwmon {
-	struct resource *mem;
 	void __iomem *base;
 
 	int irq;
@@ -106,6 +105,7 @@ static int jz4740_hwmon_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct jz4740_hwmon *hwmon;
+	struct resource *mem;
 
 	hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
 	if (!hwmon)
@@ -120,25 +120,10 @@ static int jz4740_hwmon_probe(struct platform_device *pdev)
 		return hwmon->irq;
 	}
 
-	hwmon->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!hwmon->mem) {
-		dev_err(&pdev->dev, "Failed to get platform mmio resource\n");
-		return -ENOENT;
-	}
-
-	hwmon->mem = devm_request_mem_region(&pdev->dev, hwmon->mem->start,
-			resource_size(hwmon->mem), pdev->name);
-	if (!hwmon->mem) {
-		dev_err(&pdev->dev, "Failed to request mmio memory region\n");
-		return -EBUSY;
-	}
-
-	hwmon->base = devm_ioremap_nocache(&pdev->dev, hwmon->mem->start,
-					   resource_size(hwmon->mem));
-	if (!hwmon->base) {
-		dev_err(&pdev->dev, "Failed to ioremap mmio memory\n");
-		return -EBUSY;
-	}
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hwmon->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(hwmon->base))
+		return PTR_ERR(hwmon->base);
 
 	init_completion(&hwmon->read_completion);
 	mutex_init(&hwmon->lock);

drivers/hwmon/lm95241.c

@@ -89,7 +89,7 @@ static const u8 lm95241_reg_address[] = {
 
 /* Client data (each client gets its own) */
 struct lm95241_data {
-	struct device *hwmon_dev;
+	struct i2c_client *client;
 	struct mutex update_lock;
 	unsigned long last_updated, interval;	/* in jiffies */
 	char valid;		/* zero until following fields are valid */
@@ -113,8 +113,8 @@ static int temp_from_reg_unsigned(u8 val_h, u8 val_l)
 
 static struct lm95241_data *lm95241_update_device(struct device *dev)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95241_data *data = i2c_get_clientdata(client);
+	struct lm95241_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 
 	mutex_lock(&data->update_lock);
 
@@ -122,7 +122,7 @@ static struct lm95241_data *lm95241_update_device(struct device *dev)
 	    !data->valid) {
 		int i;
 
-		dev_dbg(&client->dev, "Updating lm95241 data.\n");
+		dev_dbg(dev, "Updating lm95241 data.\n");
 		for (i = 0; i < ARRAY_SIZE(lm95241_reg_address); i++)
 			data->temp[i]
 			  = i2c_smbus_read_byte_data(client,
@@ -153,8 +153,7 @@ static ssize_t show_input(struct device *dev, struct device_attribute *attr,
 static ssize_t show_type(struct device *dev, struct device_attribute *attr,
 			 char *buf)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95241_data *data = i2c_get_clientdata(client);
+	struct lm95241_data *data = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE - 1,
 		data->model & to_sensor_dev_attr(attr)->index ? "1\n" : "2\n");
@@ -163,8 +162,8 @@ static ssize_t show_type(struct device *dev, struct device_attribute *attr,
 static ssize_t set_type(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95241_data *data = i2c_get_clientdata(client);
+	struct lm95241_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	unsigned long val;
 	int shift;
 	u8 mask = to_sensor_dev_attr(attr)->index;
@@ -201,8 +200,7 @@ static ssize_t set_type(struct device *dev, struct device_attribute *attr,
 static ssize_t show_min(struct device *dev, struct device_attribute *attr,
 			char *buf)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95241_data *data = i2c_get_clientdata(client);
+	struct lm95241_data *data = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE - 1,
 			data->config & to_sensor_dev_attr(attr)->index ?
@@ -212,8 +210,7 @@ static ssize_t show_min(struct device *dev, struct device_attribute *attr,
 static ssize_t set_min(struct device *dev, struct device_attribute *attr,
 		       const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95241_data *data = i2c_get_clientdata(client);
+	struct lm95241_data *data = dev_get_drvdata(dev);
 	long val;
 
 	if (kstrtol(buf, 10, &val) < 0)
@@ -229,7 +226,8 @@ static ssize_t set_min(struct device *dev, struct device_attribute *attr,
 		data->config &= ~to_sensor_dev_attr(attr)->index;
 	data->valid = 0;
 
-	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
+	i2c_smbus_write_byte_data(data->client, LM95241_REG_RW_CONFIG,
+				  data->config);
 
 	mutex_unlock(&data->update_lock);
 
@@ -239,8 +237,7 @@ static ssize_t set_min(struct device *dev, struct device_attribute *attr,
 static ssize_t show_max(struct device *dev, struct device_attribute *attr,
 			char *buf)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95241_data *data = i2c_get_clientdata(client);
+	struct lm95241_data *data = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE - 1,
 			data->config & to_sensor_dev_attr(attr)->index ?
@@ -250,8 +247,7 @@ static ssize_t show_max(struct device *dev, struct device_attribute *attr,
 static ssize_t set_max(struct device *dev, struct device_attribute *attr,
 		       const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95241_data *data = i2c_get_clientdata(client);
+	struct lm95241_data *data = dev_get_drvdata(dev);
 	long val;
 
 	if (kstrtol(buf, 10, &val) < 0)
@@ -267,7 +263,8 @@ static ssize_t set_max(struct device *dev, struct device_attribute *attr,
 		data->config &= ~to_sensor_dev_attr(attr)->index;
 	data->valid = 0;
 
-	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
+	i2c_smbus_write_byte_data(data->client, LM95241_REG_RW_CONFIG,
+				  data->config);
 
 	mutex_unlock(&data->update_lock);
 
@@ -286,8 +283,7 @@ static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
 static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95241_data *data = i2c_get_clientdata(client);
+	struct lm95241_data *data = dev_get_drvdata(dev);
 	unsigned long val;
 
 	if (kstrtoul(buf, 10, &val) < 0)
@@ -316,7 +312,7 @@ static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max,
 static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval,
 		   set_interval);
 
-static struct attribute *lm95241_attributes[] = {
+static struct attribute *lm95241_attrs[] = {
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	&sensor_dev_attr_temp2_input.dev_attr.attr,
 	&sensor_dev_attr_temp3_input.dev_attr.attr,
@@ -329,10 +325,7 @@ static struct attribute *lm95241_attributes[] = {
 	&dev_attr_update_interval.attr,
 	NULL
 };
-
-static const struct attribute_group lm95241_group = {
-	.attrs = lm95241_attributes,
-};
+ATTRIBUTE_GROUPS(lm95241);
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
 static int lm95241_detect(struct i2c_client *new_client,
@@ -366,14 +359,11 @@ static int lm95241_detect(struct i2c_client *new_client,
 	return 0;
 }
 
-static void lm95241_init_client(struct i2c_client *client)
+static void lm95241_init_client(struct i2c_client *client,
+				struct lm95241_data *data)
 {
-	struct lm95241_data *data = i2c_get_clientdata(client);
-
 	data->interval = HZ;	/* 1 sec default */
-	data->valid = 0;
 	data->config = CFG_CR0076;
-	data->model = 0;
 	data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT);
 
 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
@@ -385,49 +375,27 @@ static void lm95241_init_client(struct i2c_client *client)
 				  data->model);
 }
 
-static int lm95241_probe(struct i2c_client *new_client,
+static int lm95241_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	struct device *dev = &client->dev;
 	struct lm95241_data *data;
-	int err;
+	struct device *hwmon_dev;
 
-	data = devm_kzalloc(&new_client->dev, sizeof(struct lm95241_data),
-			    GFP_KERNEL);
+	data = devm_kzalloc(dev, sizeof(struct lm95241_data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	i2c_set_clientdata(new_client, data);
+	data->client = client;
 	mutex_init(&data->update_lock);
 
 	/* Initialize the LM95241 chip */
-	lm95241_init_client(new_client);
+	lm95241_init_client(client, data);
 
-	/* Register sysfs hooks */
-	err = sysfs_create_group(&new_client->dev.kobj, &lm95241_group);
-	if (err)
-		return err;
-
-	data->hwmon_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove_files;
-	}
-
-	return 0;
-
-exit_remove_files:
-	sysfs_remove_group(&new_client->dev.kobj, &lm95241_group);
-	return err;
-}
-
-static int lm95241_remove(struct i2c_client *client)
-{
-	struct lm95241_data *data = i2c_get_clientdata(client);
-
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &lm95241_group);
-
-	return 0;
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   data,
+							   lm95241_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
 /* Driver data (common to all clients) */
@@ -444,7 +412,6 @@ static struct i2c_driver lm95241_driver = {
 		.name	= DEVNAME,
 	},
 	.probe		= lm95241_probe,
-	.remove		= lm95241_remove,
 	.id_table	= lm95241_id,
 	.detect		= lm95241_detect,
 	.address_list	= normal_i2c,

drivers/hwmon/lm95245.c

@@ -115,7 +115,7 @@ static const u8 lm95245_reg_address[] = {
 
 /* Client data (each client gets its own) */
 struct lm95245_data {
-	struct device *hwmon_dev;
+	struct i2c_client *client;
 	struct mutex update_lock;
 	unsigned long last_updated;	/* in jiffies */
 	unsigned long interval;	/* in msecs */
@@ -140,8 +140,8 @@ static int temp_from_reg_signed(u8 val_h, u8 val_l)
 
 static struct lm95245_data *lm95245_update_device(struct device *dev)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95245_data *data = i2c_get_clientdata(client);
+	struct lm95245_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 
 	mutex_lock(&data->update_lock);
 
@@ -149,7 +149,6 @@ static struct lm95245_data *lm95245_update_device(struct device *dev)
 		+ msecs_to_jiffies(data->interval)) || !data->valid) {
 		int i;
 
-		dev_dbg(&client->dev, "Updating lm95245 data.\n");
 		for (i = 0; i < ARRAY_SIZE(lm95245_reg_address); i++)
 			data->regs[i]
 			  = i2c_smbus_read_byte_data(client,
@@ -249,9 +248,9 @@ static ssize_t show_limit(struct device *dev, struct device_attribute *attr,
 static ssize_t set_limit(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95245_data *data = i2c_get_clientdata(client);
+	struct lm95245_data *data = dev_get_drvdata(dev);
 	int index = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = data->client;
 	unsigned long val;
 
 	if (kstrtoul(buf, 10, &val) < 0)
@@ -272,27 +271,38 @@ static ssize_t set_limit(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
+static ssize_t show_crit_hyst(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct lm95245_data *data = lm95245_update_device(dev);
+	int index = to_sensor_dev_attr(attr)->index;
+	int hyst = data->regs[index] - data->regs[8];
+
+	return snprintf(buf, PAGE_SIZE - 1, "%d\n", hyst * 1000);
+}
+
 static ssize_t set_crit_hyst(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95245_data *data = i2c_get_clientdata(client);
+	struct lm95245_data *data = dev_get_drvdata(dev);
+	int index = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = data->client;
 	unsigned long val;
+	int hyst, limit;
 
 	if (kstrtoul(buf, 10, &val) < 0)
 		return -EINVAL;
 
-	val /= 1000;
-
-	val = clamp_val(val, 0, 31);
-
 	mutex_lock(&data->update_lock);
 
-	data->valid = 0;
+	limit = i2c_smbus_read_byte_data(client, lm95245_reg_address[index]);
+	hyst = limit - val / 1000;
+	hyst = clamp_val(hyst, 0, 31);
+	data->regs[8] = hyst;
 
 	/* shared crit hysteresis */
 	i2c_smbus_write_byte_data(client, LM95245_REG_RW_COMMON_HYSTERESIS,
-		val);
+		hyst);
 
 	mutex_unlock(&data->update_lock);
 
@@ -302,8 +312,7 @@ static ssize_t set_crit_hyst(struct device *dev, struct device_attribute *attr,
 static ssize_t show_type(struct device *dev, struct device_attribute *attr,
 			 char *buf)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95245_data *data = i2c_get_clientdata(client);
+	struct lm95245_data *data = dev_get_drvdata(dev);
 
 	return snprintf(buf, PAGE_SIZE - 1,
 		data->config2 & CFG2_REMOTE_TT ? "1\n" : "2\n");
@@ -312,8 +321,8 @@ static ssize_t show_type(struct device *dev, struct device_attribute *attr,
 static ssize_t set_type(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95245_data *data = i2c_get_clientdata(client);
+	struct lm95245_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	unsigned long val;
 
 	if (kstrtoul(buf, 10, &val) < 0)
@@ -359,8 +368,8 @@ static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
 static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95245_data *data = i2c_get_clientdata(client);
+	struct lm95245_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	unsigned long val;
 
 	if (kstrtoul(buf, 10, &val) < 0)
@@ -378,16 +387,15 @@ static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0);
 static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_limit,
 		set_limit, 6);
-static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_limit,
-		set_crit_hyst, 8);
+static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_crit_hyst,
+		set_crit_hyst, 6);
 static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL,
 		STATUS1_LOC);
 
 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2);
 static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_limit,
 		set_limit, 7);
-static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_limit,
-		set_crit_hyst, 8);
+static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_crit_hyst, NULL, 7);
 static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL,
 		STATUS1_RTCRIT);
 static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type,
@@ -398,7 +406,7 @@ static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL,
 static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval,
 		set_interval);
 
-static struct attribute *lm95245_attributes[] = {
+static struct attribute *lm95245_attrs[] = {
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	&sensor_dev_attr_temp1_crit.dev_attr.attr,
 	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
@@ -412,10 +420,7 @@ static struct attribute *lm95245_attributes[] = {
 	&dev_attr_update_interval.attr,
 	NULL
 };
-
-static const struct attribute_group lm95245_group = {
-	.attrs = lm95245_attributes,
-};
+ATTRIBUTE_GROUPS(lm95245);
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
 static int lm95245_detect(struct i2c_client *new_client,
@@ -436,11 +441,9 @@ static int lm95245_detect(struct i2c_client *new_client,
 	return 0;
 }
 
-static void lm95245_init_client(struct i2c_client *client)
+static void lm95245_init_client(struct i2c_client *client,
+				struct lm95245_data *data)
 {
-	struct lm95245_data *data = i2c_get_clientdata(client);
-
-	data->valid = 0;
 	data->interval = lm95245_read_conversion_rate(client);
 
 	data->config1 = i2c_smbus_read_byte_data(client,
@@ -456,49 +459,27 @@ static void lm95245_init_client(struct i2c_client *client)
 	}
 }
 
-static int lm95245_probe(struct i2c_client *new_client,
+static int lm95245_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	struct device *dev = &client->dev;
 	struct lm95245_data *data;
-	int err;
+	struct device *hwmon_dev;
 
-	data = devm_kzalloc(&new_client->dev, sizeof(struct lm95245_data),
-			    GFP_KERNEL);
+	data = devm_kzalloc(dev, sizeof(struct lm95245_data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	i2c_set_clientdata(new_client, data);
+	data->client = client;
 	mutex_init(&data->update_lock);
 
 	/* Initialize the LM95245 chip */
-	lm95245_init_client(new_client);
-
-	/* Register sysfs hooks */
-	err = sysfs_create_group(&new_client->dev.kobj, &lm95245_group);
-	if (err)
-		return err;
-
-	data->hwmon_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove_files;
-	}
-
-	return 0;
-
-exit_remove_files:
-	sysfs_remove_group(&new_client->dev.kobj, &lm95245_group);
-	return err;
-}
+	lm95245_init_client(client, data);
 
-static int lm95245_remove(struct i2c_client *client)
-{
-	struct lm95245_data *data = i2c_get_clientdata(client);
-
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &lm95245_group);
-
-	return 0;
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   data,
+							   lm95245_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
 /* Driver data (common to all clients) */
@@ -514,7 +495,6 @@ static struct i2c_driver lm95245_driver = {
 		.name	= DEVNAME,
 	},
 	.probe		= lm95245_probe,
-	.remove		= lm95245_remove,
 	.id_table	= lm95245_id,
 	.detect		= lm95245_detect,
 	.address_list	= normal_i2c,

drivers/hwmon/ltc4215.c

@@ -33,7 +33,7 @@ enum ltc4215_cmd {
 };
 
 struct ltc4215_data {
-	struct device *hwmon_dev;
+	struct i2c_client *client;
 
 	struct mutex update_lock;
 	bool valid;
@@ -45,8 +45,8 @@ struct ltc4215_data {
 
 static struct ltc4215_data *ltc4215_update_device(struct device *dev)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct ltc4215_data *data = i2c_get_clientdata(client);
+	struct ltc4215_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	s32 val;
 	int i;
 
@@ -214,7 +214,7 @@ static SENSOR_DEVICE_ATTR(in2_min_alarm, S_IRUGO, ltc4215_show_alarm, NULL,
  * Finally, construct an array of pointers to members of the above objects,
  * as required for sysfs_create_group()
  */
-static struct attribute *ltc4215_attributes[] = {
+static struct attribute *ltc4215_attrs[] = {
 	&sensor_dev_attr_curr1_input.dev_attr.attr,
 	&sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
 
@@ -229,57 +229,33 @@ static struct attribute *ltc4215_attributes[] = {
 
 	NULL,
 };
-
-static const struct attribute_group ltc4215_group = {
-	.attrs = ltc4215_attributes,
-};
+ATTRIBUTE_GROUPS(ltc4215);
 
 static int ltc4215_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &client->dev;
 	struct ltc4215_data *data;
-	int ret;
+	struct device *hwmon_dev;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	i2c_set_clientdata(client, data);
+	data->client = client;
 	mutex_init(&data->update_lock);
 
 	/* Initialize the LTC4215 chip */
 	i2c_smbus_write_byte_data(client, LTC4215_FAULT, 0x00);
 
-	/* Register sysfs hooks */
-	ret = sysfs_create_group(&client->dev.kobj, &ltc4215_group);
-	if (ret)
-		return ret;
-
-	data->hwmon_dev = hwmon_device_register(&client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		ret = PTR_ERR(data->hwmon_dev);
-		goto out_hwmon_device_register;
-	}
-
-	return 0;
-
-out_hwmon_device_register:
-	sysfs_remove_group(&client->dev.kobj, &ltc4215_group);
-	return ret;
-}
-
-static int ltc4215_remove(struct i2c_client *client)
-{
-	struct ltc4215_data *data = i2c_get_clientdata(client);
-
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &ltc4215_group);
-
-	return 0;
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   data,
+							   ltc4215_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
 static const struct i2c_device_id ltc4215_id[] = {
@@ -294,7 +270,6 @@ static struct i2c_driver ltc4215_driver = {
 		.name	= "ltc4215",
 	},
 	.probe		= ltc4215_probe,
-	.remove		= ltc4215_remove,
 	.id_table	= ltc4215_id,
 };
 

drivers/hwmon/ltc4222.c

+/*
+ * Driver for Linear Technology LTC4222 Dual Hot Swap controller
+ *
+ * Copyright (c) 2014 Guenter Roeck
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/regmap.h>
+
+/* chip registers */
+
+#define LTC4222_CONTROL1	0xd0
+#define LTC4222_ALERT1		0xd1
+#define LTC4222_STATUS1		0xd2
+#define LTC4222_FAULT1		0xd3
+#define LTC4222_CONTROL2	0xd4
+#define LTC4222_ALERT2		0xd5
+#define LTC4222_STATUS2		0xd6
+#define LTC4222_FAULT2		0xd7
+#define LTC4222_SOURCE1		0xd8
+#define LTC4222_SOURCE2		0xda
+#define LTC4222_ADIN1		0xdc
+#define LTC4222_ADIN2		0xde
+#define LTC4222_SENSE1		0xe0
+#define LTC4222_SENSE2		0xe2
+#define LTC4222_ADC_CONTROL	0xe4
+
+/*
+ * Fault register bits
+ */
+#define FAULT_OV	BIT(0)
+#define FAULT_UV	BIT(1)
+#define FAULT_OC	BIT(2)
+#define FAULT_POWER_BAD	BIT(3)
+#define FAULT_FET_BAD	BIT(5)
+
+/* Return the voltage from the given register in mV or mA */
+static int ltc4222_get_value(struct device *dev, u8 reg)
+{
+	struct regmap *regmap = dev_get_drvdata(dev);
+	unsigned int val;
+	u8 buf[2];
+	int ret;
+
+	ret = regmap_bulk_read(regmap, reg, buf, 2);
+	if (ret < 0)
+		return ret;
+
+	val = ((buf[0] << 8) + buf[1]) >> 6;
+
+	switch (reg) {
+	case LTC4222_ADIN1:
+	case LTC4222_ADIN2:
+		/* 1.25 mV resolution. Convert to mV. */
+		val = DIV_ROUND_CLOSEST(val * 5, 4);
+		break;
+	case LTC4222_SOURCE1:
+	case LTC4222_SOURCE2:
+		/* 31.25 mV resolution. Convert to mV. */
+		val = DIV_ROUND_CLOSEST(val * 125, 4);
+		break;
+	case LTC4222_SENSE1:
+	case LTC4222_SENSE2:
+		/*
+		 * 62.5 uV resolution. Convert to current as measured with
+		 * an 1 mOhm sense resistor, in mA. If a different sense
+		 * resistor is installed, calculate the actual current by
+		 * dividing the reported current by the sense resistor value
+		 * in mOhm.
+		 */
+		val = DIV_ROUND_CLOSEST(val * 125, 2);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return val;
+}
+
+static ssize_t ltc4222_show_value(struct device *dev,
+				  struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int value;
+
+	value = ltc4222_get_value(dev, attr->index);
+	if (value < 0)
+		return value;
+	return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+static ssize_t ltc4222_show_bool(struct device *dev,
+				 struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da);
+	struct regmap *regmap = dev_get_drvdata(dev);
+	unsigned int fault;
+	int ret;
+
+	ret = regmap_read(regmap, attr->nr, &fault);
+	if (ret < 0)
+		return ret;
+	fault &= attr->index;
+	if (fault)		/* Clear reported faults in chip register */
+		regmap_update_bits(regmap, attr->nr, attr->index, 0);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", !!fault);
+}
+
+/* Voltages */
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ltc4222_show_value, NULL,
+			  LTC4222_SOURCE1);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc4222_show_value, NULL,
+			  LTC4222_ADIN1);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, ltc4222_show_value, NULL,
+			  LTC4222_SOURCE2);
+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, ltc4222_show_value, NULL,
+			  LTC4222_ADIN2);
+
+/*
+ * Voltage alarms
+ * UV/OV faults are associated with the input voltage, and power bad and fet
+ * faults are associated with the output voltage.
+ */
+static SENSOR_DEVICE_ATTR_2(in1_min_alarm, S_IRUGO, ltc4222_show_bool, NULL,
+			    LTC4222_FAULT1, FAULT_UV);
+static SENSOR_DEVICE_ATTR_2(in1_max_alarm, S_IRUGO, ltc4222_show_bool, NULL,
+			    LTC4222_FAULT1, FAULT_OV);
+static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, ltc4222_show_bool, NULL,
+			    LTC4222_FAULT1, FAULT_POWER_BAD | FAULT_FET_BAD);
+
+static SENSOR_DEVICE_ATTR_2(in3_min_alarm, S_IRUGO, ltc4222_show_bool, NULL,
+			    LTC4222_FAULT2, FAULT_UV);
+static SENSOR_DEVICE_ATTR_2(in3_max_alarm, S_IRUGO, ltc4222_show_bool, NULL,
+			    LTC4222_FAULT2, FAULT_OV);
+static SENSOR_DEVICE_ATTR_2(in4_alarm, S_IRUGO, ltc4222_show_bool, NULL,
+			    LTC4222_FAULT2, FAULT_POWER_BAD | FAULT_FET_BAD);
+
+/* Current (via sense resistor) */
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc4222_show_value, NULL,
+			  LTC4222_SENSE1);
+static SENSOR_DEVICE_ATTR(curr2_input, S_IRUGO, ltc4222_show_value, NULL,
+			  LTC4222_SENSE2);
+
+/* Overcurrent alarm */
+static SENSOR_DEVICE_ATTR_2(curr1_max_alarm, S_IRUGO, ltc4222_show_bool, NULL,
+			    LTC4222_FAULT1, FAULT_OC);
+static SENSOR_DEVICE_ATTR_2(curr2_max_alarm, S_IRUGO, ltc4222_show_bool, NULL,
+			    LTC4222_FAULT2, FAULT_OC);
+
+static struct attribute *ltc4222_attrs[] = {
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_in1_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_in3_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_curr1_input.dev_attr.attr,
+	&sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_curr2_input.dev_attr.attr,
+	&sensor_dev_attr_curr2_max_alarm.dev_attr.attr,
+
+	NULL,
+};
+ATTRIBUTE_GROUPS(ltc4222);
+
+static struct regmap_config ltc4222_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = LTC4222_ADC_CONTROL,
+};
+
+static int ltc4222_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device *hwmon_dev;
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i2c(client, &ltc4222_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "failed to allocate register map\n");
+		return PTR_ERR(regmap);
+	}
+
+	/* Clear faults */
+	regmap_write(regmap, LTC4222_FAULT1, 0x00);
+	regmap_write(regmap, LTC4222_FAULT2, 0x00);
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   regmap,
+							   ltc4222_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id ltc4222_id[] = {
+	{"ltc4222", 0},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, ltc4222_id);
+
+static struct i2c_driver ltc4222_driver = {
+	.driver = {
+		   .name = "ltc4222",
+		   },
+	.probe = ltc4222_probe,
+	.id_table = ltc4222_id,
+};
+
+module_i2c_driver(ltc4222_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("LTC4222 driver");
+MODULE_LICENSE("GPL");

drivers/hwmon/ltc4245.c

@@ -95,7 +95,6 @@ static void ltc4245_update_gpios(struct device *dev)
 	 * readings as stale by setting them to -EAGAIN
 	 */
 	if (time_after(jiffies, data->last_updated + 5 * HZ)) {
-		dev_dbg(&client->dev, "Marking GPIOs invalid\n");
 		for (i = 0; i < ARRAY_SIZE(data->gpios); i++)
 			data->gpios[i] = -EAGAIN;
 	}
@@ -141,8 +140,6 @@ static struct ltc4245_data *ltc4245_update_device(struct device *dev)
 
 	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 
-		dev_dbg(&client->dev, "Starting ltc4245 update\n");
-
 		/* Read control registers -- 0x00 to 0x07 */
 		for (i = 0; i < ARRAY_SIZE(data->cregs); i++) {
 			val = i2c_smbus_read_byte_data(client, i);
@@ -470,19 +467,15 @@ static void ltc4245_sysfs_add_groups(struct ltc4245_data *data)
 static bool ltc4245_use_extra_gpios(struct i2c_client *client)
 {
 	struct ltc4245_platform_data *pdata = dev_get_platdata(&client->dev);
-#ifdef CONFIG_OF
 	struct device_node *np = client->dev.of_node;
-#endif
 
 	/* prefer platform data */
 	if (pdata)
 		return pdata->use_extra_gpios;
 
-#ifdef CONFIG_OF
 	/* fallback on OF */
 	if (of_find_property(np, "ltc4245,use-extra-gpios", NULL))
 		return true;
-#endif
 
 	return false;
 }
@@ -512,24 +505,10 @@ static int ltc4245_probe(struct i2c_client *client,
 	/* Add sysfs hooks */
 	ltc4245_sysfs_add_groups(data);
 
-	hwmon_dev = hwmon_device_register_with_groups(&client->dev,
+	hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev,
 							   client->name, data,
 							   data->groups);
-	if (IS_ERR(hwmon_dev))
-		return PTR_ERR(hwmon_dev);
-
-	i2c_set_clientdata(client, hwmon_dev);
-
-	return 0;
-}
-
-static int ltc4245_remove(struct i2c_client *client)
-{
-	struct device *hwmon_dev = i2c_get_clientdata(client);
-
-	hwmon_device_unregister(hwmon_dev);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
 static const struct i2c_device_id ltc4245_id[] = {
@@ -544,7 +523,6 @@ static struct i2c_driver ltc4245_driver = {
 		.name	= "ltc4245",
 	},
 	.probe		= ltc4245_probe,
-	.remove		= ltc4245_remove,
 	.id_table	= ltc4245_id,
 };
 

drivers/hwmon/ltc4260.c

+/*
+ * Driver for Linear Technology LTC4260 I2C Positive Voltage Hot Swap Controller
+ *
+ * Copyright (c) 2014 Guenter Roeck
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/regmap.h>
+
+/* chip registers */
+#define LTC4260_CONTROL	0x00
+#define LTC4260_ALERT	0x01
+#define LTC4260_STATUS	0x02
+#define LTC4260_FAULT	0x03
+#define LTC4260_SENSE	0x04
+#define LTC4260_SOURCE	0x05
+#define LTC4260_ADIN	0x06
+
+/*
+ * Fault register bits
+ */
+#define FAULT_OV	(1 << 0)
+#define FAULT_UV	(1 << 1)
+#define FAULT_OC	(1 << 2)
+#define FAULT_POWER_BAD	(1 << 3)
+#define FAULT_FET_SHORT	(1 << 5)
+
+/* Return the voltage from the given register in mV or mA */
+static int ltc4260_get_value(struct device *dev, u8 reg)
+{
+	struct regmap *regmap = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(regmap, reg, &val);
+	if (ret < 0)
+		return ret;
+
+	switch (reg) {
+	case LTC4260_ADIN:
+		/* 10 mV resolution. Convert to mV. */
+		val = val * 10;
+		break;
+	case LTC4260_SOURCE:
+		/* 400 mV resolution. Convert to mV. */
+		val = val * 400;
+		break;
+	case LTC4260_SENSE:
+		/*
+		 * 300 uV resolution. Convert to current as measured with
+		 * an 1 mOhm sense resistor, in mA. If a different sense
+		 * resistor is installed, calculate the actual current by
+		 * dividing the reported current by the sense resistor value
+		 * in mOhm.
+		 */
+		val = val * 300;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return val;
+}
+
+static ssize_t ltc4260_show_value(struct device *dev,
+				  struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int value;
+
+	value = ltc4260_get_value(dev, attr->index);
+	if (value < 0)
+		return value;
+	return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+static ssize_t ltc4260_show_bool(struct device *dev,
+				 struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct regmap *regmap = dev_get_drvdata(dev);
+	unsigned int fault;
+	int ret;
+
+	ret = regmap_read(regmap, LTC4260_FAULT, &fault);
+	if (ret < 0)
+		return ret;
+
+	fault &= attr->index;
+	if (fault)		/* Clear reported faults in chip register */
+		regmap_update_bits(regmap, LTC4260_FAULT, attr->index, 0);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", !!fault);
+}
+
+/* Voltages */
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ltc4260_show_value, NULL,
+			  LTC4260_SOURCE);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc4260_show_value, NULL,
+			  LTC4260_ADIN);
+
+/*
+ * Voltage alarms
+ * UV/OV faults are associated with the input voltage, and the POWER BAD and
+ * FET SHORT faults are associated with the output voltage.
+ */
+static SENSOR_DEVICE_ATTR(in1_min_alarm, S_IRUGO, ltc4260_show_bool, NULL,
+			  FAULT_UV);
+static SENSOR_DEVICE_ATTR(in1_max_alarm, S_IRUGO, ltc4260_show_bool, NULL,
+			  FAULT_OV);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, ltc4260_show_bool, NULL,
+			  FAULT_POWER_BAD | FAULT_FET_SHORT);
+
+/* Current (via sense resistor) */
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc4260_show_value, NULL,
+			  LTC4260_SENSE);
+
+/* Overcurrent alarm */
+static SENSOR_DEVICE_ATTR(curr1_max_alarm, S_IRUGO, ltc4260_show_bool, NULL,
+			  FAULT_OC);
+
+static struct attribute *ltc4260_attrs[] = {
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_in1_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_curr1_input.dev_attr.attr,
+	&sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
+
+	NULL,
+};
+ATTRIBUTE_GROUPS(ltc4260);
+
+static struct regmap_config ltc4260_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = LTC4260_ADIN,
+};
+
+static int ltc4260_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device *hwmon_dev;
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i2c(client, &ltc4260_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "failed to allocate register map\n");
+		return PTR_ERR(regmap);
+	}
+
+	/* Clear faults */
+	regmap_write(regmap, LTC4260_FAULT, 0x00);
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   regmap,
+							   ltc4260_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id ltc4260_id[] = {
+	{"ltc4260", 0},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, ltc4260_id);
+
+static struct i2c_driver ltc4260_driver = {
+	.driver = {
+		   .name = "ltc4260",
+		   },
+	.probe = ltc4260_probe,
+	.id_table = ltc4260_id,
+};
+
+module_i2c_driver(ltc4260_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("LTC4260 driver");
+MODULE_LICENSE("GPL");

drivers/hwmon/max1668.c

@@ -66,7 +66,8 @@ MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");
 enum chips { max1668, max1805, max1989 };
 
 struct max1668_data {
-	struct device *hwmon_dev;
+	struct i2c_client *client;
+	const struct attribute_group *groups[3];
 	enum chips type;
 
 	struct mutex update_lock;
@@ -82,8 +83,8 @@ struct max1668_data {
 
 static struct max1668_data *max1668_update_device(struct device *dev)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max1668_data *data = i2c_get_clientdata(client);
+	struct max1668_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	struct max1668_data *ret = data;
 	s32 val;
 	int i;
@@ -205,8 +206,8 @@ static ssize_t set_temp_max(struct device *dev,
 			    const char *buf, size_t count)
 {
 	int index = to_sensor_dev_attr(devattr)->index;
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max1668_data *data = i2c_get_clientdata(client);
+	struct max1668_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	long temp;
 	int ret;
 
@@ -216,10 +217,11 @@ static ssize_t set_temp_max(struct device *dev,
 
 	mutex_lock(&data->update_lock);
 	data->temp_max[index] = clamp_val(temp/1000, -128, 127);
-	if (i2c_smbus_write_byte_data(client,
+	ret = i2c_smbus_write_byte_data(client,
 					MAX1668_REG_LIMH_WR(index),
-					data->temp_max[index]))
-		count = -EIO;
+					data->temp_max[index]);
+	if (ret < 0)
+		count = ret;
 	mutex_unlock(&data->update_lock);
 
 	return count;
@@ -230,8 +232,8 @@ static ssize_t set_temp_min(struct device *dev,
 			    const char *buf, size_t count)
 {
 	int index = to_sensor_dev_attr(devattr)->index;
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max1668_data *data = i2c_get_clientdata(client);
+	struct max1668_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	long temp;
 	int ret;
 
@@ -241,10 +243,11 @@ static ssize_t set_temp_min(struct device *dev,
 
 	mutex_lock(&data->update_lock);
 	data->temp_min[index] = clamp_val(temp/1000, -128, 127);
-	if (i2c_smbus_write_byte_data(client,
+	ret = i2c_smbus_write_byte_data(client,
 					MAX1668_REG_LIML_WR(index),
-					data->temp_min[index]))
-		count = -EIO;
+					data->temp_min[index]);
+	if (ret < 0)
+		count = ret;
 	mutex_unlock(&data->update_lock);
 
 	return count;
@@ -405,60 +408,29 @@ static int max1668_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &client->dev;
+	struct device *hwmon_dev;
 	struct max1668_data *data;
-	int err;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	data = devm_kzalloc(&client->dev, sizeof(struct max1668_data),
-			    GFP_KERNEL);
+	data = devm_kzalloc(dev, sizeof(struct max1668_data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	i2c_set_clientdata(client, data);
+	data->client = client;
 	data->type = id->driver_data;
 	mutex_init(&data->update_lock);
 
-	/* Register sysfs hooks */
-	err = sysfs_create_group(&client->dev.kobj, &max1668_group_common);
-	if (err)
-		return err;
-
-	if (data->type == max1668 || data->type == max1989) {
-		err = sysfs_create_group(&client->dev.kobj,
-					 &max1668_group_unique);
-		if (err)
-			goto error_sysrem0;
-	}
-
-	data->hwmon_dev = hwmon_device_register(&client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto error_sysrem1;
-	}
-
-	return 0;
-
-error_sysrem1:
+	/* sysfs hooks */
+	data->groups[0] = &max1668_group_common;
 	if (data->type == max1668 || data->type == max1989)
-		sysfs_remove_group(&client->dev.kobj, &max1668_group_unique);
-error_sysrem0:
-	sysfs_remove_group(&client->dev.kobj, &max1668_group_common);
-	return err;
-}
-
-static int max1668_remove(struct i2c_client *client)
-{
-	struct max1668_data *data = i2c_get_clientdata(client);
+		data->groups[1] = &max1668_group_unique;
 
-	hwmon_device_unregister(data->hwmon_dev);
-	if (data->type == max1668 || data->type == max1989)
-		sysfs_remove_group(&client->dev.kobj, &max1668_group_unique);
-
-	sysfs_remove_group(&client->dev.kobj, &max1668_group_common);
-
-	return 0;
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   data, data->groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
 static const struct i2c_device_id max1668_id[] = {
@@ -476,7 +448,6 @@ static struct i2c_driver max1668_driver = {
 		  .name	= "max1668",
 		  },
 	.probe = max1668_probe,
-	.remove	= max1668_remove,
 	.id_table = max1668_id,
 	.detect	= max1668_detect,
 	.address_list = max1668_addr_list,

drivers/hwmon/max6639.c

@@ -80,7 +80,7 @@ static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
  * Client data (each client gets its own)
  */
 struct max6639_data {
-	struct device *hwmon_dev;
+	struct i2c_client *client;
 	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
@@ -104,8 +104,8 @@ struct max6639_data {
 
 static struct max6639_data *max6639_update_device(struct device *dev)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6639_data *data = i2c_get_clientdata(client);
+	struct max6639_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	struct max6639_data *ret = data;
 	int i;
 	int status_reg;
@@ -191,9 +191,8 @@ static ssize_t show_temp_fault(struct device *dev,
 static ssize_t show_temp_max(struct device *dev,
 			     struct device_attribute *dev_attr, char *buf)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6639_data *data = i2c_get_clientdata(client);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+	struct max6639_data *data = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%d\n", (data->temp_therm[attr->index] * 1000));
 }
@@ -202,9 +201,9 @@ static ssize_t set_temp_max(struct device *dev,
 			    struct device_attribute *dev_attr,
 			    const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6639_data *data = i2c_get_clientdata(client);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+	struct max6639_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	unsigned long val;
 	int res;
 
@@ -224,9 +223,8 @@ static ssize_t set_temp_max(struct device *dev,
 static ssize_t show_temp_crit(struct device *dev,
 			      struct device_attribute *dev_attr, char *buf)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6639_data *data = i2c_get_clientdata(client);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+	struct max6639_data *data = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%d\n", (data->temp_alert[attr->index] * 1000));
 }
@@ -235,9 +233,9 @@ static ssize_t set_temp_crit(struct device *dev,
 			     struct device_attribute *dev_attr,
 			     const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6639_data *data = i2c_get_clientdata(client);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+	struct max6639_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	unsigned long val;
 	int res;
 
@@ -258,9 +256,8 @@ static ssize_t show_temp_emergency(struct device *dev,
 				   struct device_attribute *dev_attr,
 				   char *buf)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6639_data *data = i2c_get_clientdata(client);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+	struct max6639_data *data = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%d\n", (data->temp_ot[attr->index] * 1000));
 }
@@ -269,9 +266,9 @@ static ssize_t set_temp_emergency(struct device *dev,
 				  struct device_attribute *dev_attr,
 				  const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6639_data *data = i2c_get_clientdata(client);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+	struct max6639_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	unsigned long val;
 	int res;
 
@@ -291,9 +288,8 @@ static ssize_t set_temp_emergency(struct device *dev,
 static ssize_t show_pwm(struct device *dev,
 			struct device_attribute *dev_attr, char *buf)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6639_data *data = i2c_get_clientdata(client);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+	struct max6639_data *data = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%d\n", data->pwm[attr->index] * 255 / 120);
 }
@@ -302,9 +298,9 @@ static ssize_t set_pwm(struct device *dev,
 		       struct device_attribute *dev_attr,
 		       const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct max6639_data *data = i2c_get_clientdata(client);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+	struct max6639_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
 	unsigned long val;
 	int res;
 
@@ -378,7 +374,7 @@ static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO, show_alarm, NULL, 5);
 static SENSOR_DEVICE_ATTR(temp2_emergency_alarm, S_IRUGO, show_alarm, NULL, 4);
 
 
-static struct attribute *max6639_attributes[] = {
+static struct attribute *max6639_attrs[] = {
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	&sensor_dev_attr_temp2_input.dev_attr.attr,
 	&sensor_dev_attr_temp1_fault.dev_attr.attr,
@@ -403,10 +399,7 @@ static struct attribute *max6639_attributes[] = {
 	&sensor_dev_attr_temp2_emergency_alarm.dev_attr.attr,
 	NULL
 };
-
-static const struct attribute_group max6639_group = {
-	.attrs = max6639_attributes,
-};
+ATTRIBUTE_GROUPS(max6639);
 
 /*
  *  returns respective index in rpm_ranges table
@@ -424,9 +417,9 @@ static int rpm_range_to_reg(int range)
 	return 1; /* default: 4000 RPM */
 }
 
-static int max6639_init_client(struct i2c_client *client)
+static int max6639_init_client(struct i2c_client *client,
+			       struct max6639_data *data)
 {
-	struct max6639_data *data = i2c_get_clientdata(client);
 	struct max6639_platform_data *max6639_info =
 		dev_get_platdata(&client->dev);
 	int i;
@@ -545,50 +538,27 @@ static int max6639_detect(struct i2c_client *client,
 static int max6639_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	struct device *dev = &client->dev;
 	struct max6639_data *data;
+	struct device *hwmon_dev;
 	int err;
 
-	data = devm_kzalloc(&client->dev, sizeof(struct max6639_data),
-			    GFP_KERNEL);
+	data = devm_kzalloc(dev, sizeof(struct max6639_data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	i2c_set_clientdata(client, data);
+	data->client = client;
 	mutex_init(&data->update_lock);
 
 	/* Initialize the max6639 chip */
-	err = max6639_init_client(client);
+	err = max6639_init_client(client, data);
 	if (err < 0)
 		return err;
 
-	/* Register sysfs hooks */
-	err = sysfs_create_group(&client->dev.kobj, &max6639_group);
-	if (err)
-		return err;
-
-	data->hwmon_dev = hwmon_device_register(&client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto error_remove;
-	}
-
-	dev_info(&client->dev, "temperature sensor and fan control found\n");
-
-	return 0;
-
-error_remove:
-	sysfs_remove_group(&client->dev.kobj, &max6639_group);
-	return err;
-}
-
-static int max6639_remove(struct i2c_client *client)
-{
-	struct max6639_data *data = i2c_get_clientdata(client);
-
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &max6639_group);
-
-	return 0;
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   data,
+							   max6639_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -622,9 +592,7 @@ static const struct i2c_device_id max6639_id[] = {
 
 MODULE_DEVICE_TABLE(i2c, max6639_id);
 
-static const struct dev_pm_ops max6639_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(max6639_suspend, max6639_resume)
-};
+static SIMPLE_DEV_PM_OPS(max6639_pm_ops, max6639_suspend, max6639_resume);
 
 static struct i2c_driver max6639_driver = {
 	.class = I2C_CLASS_HWMON,
@@ -633,7 +601,6 @@ static struct i2c_driver max6639_driver = {
 		   .pm = &max6639_pm_ops,
 		   },
 	.probe = max6639_probe,
-	.remove = max6639_remove,
 	.id_table = max6639_id,
 	.detect = max6639_detect,
 	.address_list = normal_i2c,

drivers/hwmon/pmbus/ltc2978.c

 /*
  * Hardware monitoring driver for LTC2974, LTC2977, LTC2978, LTC3880,
- * and LTC3883
+ * LTC3883, and LTM4676
  *
  * Copyright (c) 2011 Ericsson AB.
- * Copyright (c) 2013 Guenter Roeck
+ * Copyright (c) 2013, 2014 Guenter Roeck
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/kernel.h>
@@ -28,7 +24,7 @@
 #include <linux/i2c.h>
 #include "pmbus.h"
 
-enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883 };
+enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883, ltm4676 };
 
 /* Common for all chips */
 #define LTC2978_MFR_VOUT_PEAK		0xdd
@@ -45,7 +41,7 @@ enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883 };
 #define LTC2974_MFR_IOUT_PEAK		0xd7
 #define LTC2974_MFR_IOUT_MIN		0xd8
 
-/* LTC3880 and LTC3883 */
+/* LTC3880, LTC3883, and LTM4676 */
 #define LTC3880_MFR_IOUT_PEAK		0xd7
 #define LTC3880_MFR_CLEAR_PEAKS		0xe3
 #define LTC3880_MFR_TEMPERATURE2_PEAK	0xf4
@@ -53,7 +49,8 @@ enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883 };
 /* LTC3883 only */
 #define LTC3883_MFR_IIN_PEAK		0xe1
 
-#define LTC2974_ID			0x0212
+#define LTC2974_ID_REV1			0x0212
+#define LTC2974_ID_REV2			0x0213
 #define LTC2977_ID			0x0130
 #define LTC2978_ID_REV1			0x0121
 #define LTC2978_ID_REV2			0x0122
@@ -62,6 +59,8 @@ enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883 };
 #define LTC3880_ID_MASK			0xff00
 #define LTC3883_ID			0x4300
 #define LTC3883_ID_MASK			0xff00
+#define LTM4676_ID			0x4480	/* datasheet claims 0x440X */
+#define LTM4676_ID_MASK			0xfff0
 
 #define LTC2974_NUM_PAGES		4
 #define LTC2978_NUM_PAGES		8
@@ -370,6 +369,7 @@ static const struct i2c_device_id ltc2978_id[] = {
 	{"ltc2978", ltc2978},
 	{"ltc3880", ltc3880},
 	{"ltc3883", ltc3883},
+	{"ltm4676", ltm4676},
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, ltc2978_id);
@@ -394,7 +394,7 @@ static int ltc2978_probe(struct i2c_client *client,
 	if (chip_id < 0)
 		return chip_id;
 
-	if (chip_id == LTC2974_ID) {
+	if (chip_id == LTC2974_ID_REV1 || chip_id == LTC2974_ID_REV2) {
 		data->id = ltc2974;
 	} else if (chip_id == LTC2977_ID) {
 		data->id = ltc2977;
@@ -405,6 +405,8 @@ static int ltc2978_probe(struct i2c_client *client,
 		data->id = ltc3880;
 	} else if ((chip_id & LTC3883_ID_MASK) == LTC3883_ID) {
 		data->id = ltc3883;
+	} else if ((chip_id & LTM4676_ID_MASK) == LTM4676_ID) {
+		data->id = ltm4676;
 	} else {
 		dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
 		return -ENODEV;
@@ -458,6 +460,7 @@ static int ltc2978_probe(struct i2c_client *client,
 		}
 		break;
 	case ltc3880:
+	case ltm4676:
 		info->read_word_data = ltc3880_read_word_data;
 		info->pages = LTC3880_NUM_PAGES;
 		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
@@ -500,5 +503,5 @@ static struct i2c_driver ltc2978_driver = {
 module_i2c_driver(ltc2978_driver);
 
 MODULE_AUTHOR("Guenter Roeck");
-MODULE_DESCRIPTION("PMBus driver for LTC2974, LTC2978, LTC3880, and LTC3883");
+MODULE_DESCRIPTION("PMBus driver for LTC2974, LTC2978, LTC3880, LTC3883, and LTM4676");
 MODULE_LICENSE("GPL");

drivers/hwmon/smm665.c

@@ -222,7 +222,7 @@ static int smm665_read_adc(struct smm665_data *data, int adc)
 	rv = i2c_smbus_read_word_swapped(client, 0);
 	if (rv < 0) {
 		dev_dbg(&client->dev, "Failed to read ADC value: error %d", rv);
-		return -1;
+		return rv;
 	}
 	/*
 	 * Validate/verify readback adc channel (in bit 11..14).