staging: rtl8723au: Remove rf type from struct hal_version

This gets rid of yet another duplicated copy of the RF type
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8723au/hal/HalDMOutSrc8723A_CE.c

@@ -978,12 +978,10 @@ void rtl8723a_phy_iq_calibrate(struct rtw_adapter *pAdapter, bool bReCovery)
 	is13simular = false;
 
 	for (i = 0; i < 3; i++) {
-		if (IS_92C_SERIAL(pHalData->VersionID)) {
+		if (pHalData->rf_type == RF_2T2R)
 			_PHY_IQCalibrate(pAdapter, result, i, true);
-		} else {
-			/*  For 88C 1T1R */
+		else /*  For 88C 1T1R */
 			_PHY_IQCalibrate(pAdapter, result, i, false);
-		}
 
 		if (i == 1) {
 			is12simular = _PHY_SimularityCompare(pAdapter, result, 0, 1);
@@ -1051,9 +1049,10 @@ void rtl8723a_phy_iq_calibrate(struct rtw_adapter *pAdapter, bool bReCovery)
 	if ((RegE94 != 0)/*&&(RegEA4 != 0)*/)
 		_PHY_PathAFillIQKMatrix(pAdapter, bPathAOK, result, final_candidate, (RegEA4 == 0));
 
-	if (IS_92C_SERIAL(pHalData->VersionID)) {
+	if (pHalData->rf_type == RF_2T2R) {
 		if ((RegEB4 != 0)/*&&(RegEC4 != 0)*/)
-		_PHY_PathBFillIQKMatrix(pAdapter, bPathBOK, result, final_candidate, (RegEC4 == 0));
+			_PHY_PathBFillIQKMatrix(pAdapter, bPathBOK, result,
+						final_candidate, (RegEC4 == 0));
 	}
 
 	_PHY_SaveADDARegisters(pAdapter, IQK_BB_REG_92C, pdmpriv->IQK_BB_backup_recover, 9);
@@ -1072,12 +1071,10 @@ void rtl8723a_phy_lc_calibrate(struct rtw_adapter *pAdapter)
 	if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS)
 		return;
 
-	if (IS_92C_SERIAL(pHalData->VersionID)) {
+	if (pHalData->rf_type == RF_2T2R)
 		_PHY_LCCalibrate(pAdapter, true);
-	} else {
-		/*  For 88C 1T1R */
+	else	/*  For 88C 1T1R */
 		_PHY_LCCalibrate(pAdapter, false);
-	}
 }
 
 void

drivers/staging/rtl8723au/hal/hal_com.c

@@ -22,46 +22,6 @@
 
 #define _HAL_INIT_C_
 
-void dump_chip_info23a(struct hal_version ChipVersion)
-{
-	int cnt = 0;
-	u8 buf[128];
-
-	cnt += sprintf((buf + cnt), "Chip Version Info: CHIP_8723A_");
-
-	cnt += sprintf((buf + cnt), "%s_", IS_NORMAL_CHIP(ChipVersion) ?
-		       "Normal_Chip" : "Test_Chip");
-	cnt += sprintf((buf + cnt), "%s_",
-		       IS_CHIP_VENDOR_TSMC(ChipVersion) ? "TSMC" : "UMC");
-	if (IS_A_CUT(ChipVersion))
-		cnt += sprintf((buf + cnt), "A_CUT_");
-	else if (IS_B_CUT(ChipVersion))
-		cnt += sprintf((buf + cnt), "B_CUT_");
-	else if (IS_C_CUT(ChipVersion))
-		cnt += sprintf((buf + cnt), "C_CUT_");
-	else if (IS_D_CUT(ChipVersion))
-		cnt += sprintf((buf + cnt), "D_CUT_");
-	else if (IS_E_CUT(ChipVersion))
-		cnt += sprintf((buf + cnt), "E_CUT_");
-	else
-		cnt += sprintf((buf + cnt), "UNKNOWN_CUT(%d)_",
-			       ChipVersion.CUTVersion);
-
-	if (IS_1T1R(ChipVersion))
-		cnt += sprintf((buf + cnt), "1T1R_");
-	else if (IS_1T2R(ChipVersion))
-		cnt += sprintf((buf + cnt), "1T2R_");
-	else if (IS_2T2R(ChipVersion))
-		cnt += sprintf((buf + cnt), "2T2R_");
-	else
-		cnt += sprintf((buf + cnt), "UNKNOWN_RFTYPE(%d)_",
-			       ChipVersion.RFType);
-
-	cnt += sprintf((buf + cnt), "RomVer(%d)\n", ChipVersion.ROMVer);
-
-	DBG_8723A("%s", buf);
-}
-
 #define	EEPROM_CHANNEL_PLAN_BY_HW_MASK	0x80
 
 /* return the final channel plan decision */

drivers/staging/rtl8723au/hal/rtl8723a_cmd.c

@@ -169,10 +169,8 @@ void rtl8723a_set_FwPwrMode_cmd(struct rtw_adapter *padapter, u8 Mode)
 	    prevent conficting setting in Fw power */
 	/*  saving sequence. 2010.06.07. Added by tynli.
 	    Suggested by SD3 yschang. */
-	if ((Mode != PS_MODE_ACTIVE) &&
-	    (!IS_92C_SERIAL(pHalData->VersionID))) {
+	if (Mode != PS_MODE_ACTIVE && pHalData->rf_type != RF_2T2R)
 		ODM_RF_Saving23a(&pHalData->odmpriv, true);
-	}
 
 	H2CSetPwrMode.Mode = Mode;
 	H2CSetPwrMode.SmartPS = pwrpriv->smart_ps;

drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c

@@ -744,7 +744,7 @@ void rtl8723a_read_chip_version(struct rtw_adapter *padapter)
 	value32 = rtl8723au_read32(padapter, REG_SYS_CFG);
 	ChipVersion.ICType = CHIP_8723A;
 	ChipVersion.ChipType = ((value32 & RTL_ID) ? TEST_CHIP : NORMAL_CHIP);
-	ChipVersion.RFType = RF_TYPE_1T1R;
+	pHalData->rf_type = RF_1T1R;
 	ChipVersion.VendorType =
 		((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : CHIP_VENDOR_TSMC);
 	ChipVersion.CUTVersion = (value32 & CHIP_VER_RTL_MASK) >> CHIP_VER_RTL_SHIFT;	/*  IC version (CUT) */
@@ -768,16 +768,8 @@ void rtl8723a_read_chip_version(struct rtw_adapter *padapter)
 	pHalData->PolarityCtl =
 		((value32 & WL_HWPDN_SL) ? RT_POLARITY_HIGH_ACT :
 		 RT_POLARITY_LOW_ACT);
-	dump_chip_info23a(ChipVersion);
 	pHalData->VersionID = ChipVersion;
 
-	if (IS_1T2R(ChipVersion))
-		pHalData->rf_type = RF_1T2R;
-	else if (IS_2T2R(ChipVersion))
-		pHalData->rf_type = RF_2T2R;
-	else
-		pHalData->rf_type = RF_1T1R;
-
 	MSG_8723A("RF_Type is %x!!\n", pHalData->rf_type);
 }
 

drivers/staging/rtl8723au/hal/rtl8723a_phycfg.c

@@ -419,7 +419,6 @@ PHY_SetRFReg(struct rtw_adapter *Adapter, enum RF_RADIO_PATH eRFPath,
 int PHY_MACConfig8723A(struct rtw_adapter *Adapter)
 {
 	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-	bool is92C = IS_92C_SERIAL(pHalData->VersionID);
 
 	/*  */
 	/*  Config MAC */
@@ -429,7 +428,8 @@ int PHY_MACConfig8723A(struct rtw_adapter *Adapter)
 	/*  2010.07.13 AMPDU aggregation number 9 */
 	/* rtw_write16(Adapter, REG_MAX_AGGR_NUM, MAX_AGGR_NUM); */
 	rtl8723au_write8(Adapter, REG_MAX_AGGR_NUM, 0x0A);
-	if (is92C && (BOARD_USB_DONGLE == pHalData->BoardType))
+	if (pHalData->rf_type == RF_2T2R &&
+	    BOARD_USB_DONGLE == pHalData->BoardType)
 		rtl8723au_write8(Adapter, 0x40, 0x04);
 
 	return _SUCCESS;

drivers/staging/rtl8723au/hal/usb_halinit.c

@@ -447,22 +447,9 @@ static void _InitRetryFunction(struct rtw_adapter *Adapter)
 static void _InitRFType(struct rtw_adapter *Adapter)
 {
 	struct hal_data_8723a *pHalData = GET_HAL_DATA(Adapter);
-	bool is92CU = IS_92C_SERIAL(pHalData->VersionID);
 
 	pHalData->rf_chip = RF_6052;
-
-	if (!is92CU) {
 	pHalData->rf_type = RF_1T1R;
-		DBG_8723A("Set RF Chip ID to RF_6052 and RF type to 1T1R.\n");
-		return;
-	}
-
-	/*  TODO: Consider that EEPROM set 92CU to 1T1R later. */
-	/*  Force to overwrite setting according to chip version. Ignore
-	    EEPROM setting. */
-	/* pHalData->RF_Type = is92CU ? RF_2T2R : RF_1T1R; */
-	MSG_8723A("Set RF Chip ID to RF_6052 and RF type to %d.\n",
-		  pHalData->rf_type);
 }
 
 /*  Set CCK and OFDM Block "ON" */

drivers/staging/rtl8723au/include/HalVerDef.h

@@ -51,30 +51,17 @@ enum hal_vendor {
 	CHIP_VENDOR_UMC		=	1,
 };
 
-enum hal_rf_type {
-	RF_TYPE_1T1R	=	0,
-	RF_TYPE_1T2R	=	1,
-	RF_TYPE_2T2R	=	2,
-	RF_TYPE_2T3R	=	3,
-	RF_TYPE_2T4R	=	4,
-	RF_TYPE_3T3R	=	5,
-	RF_TYPE_3T4R	=	6,
-	RF_TYPE_4T4R	=	7,
-};
-
 struct hal_version {
 	enum hal_ic_type	ICType;
 	enum hal_chip_type	ChipType;
 	enum hal_cut_version	CUTVersion;
 	enum hal_vendor		VendorType;
-	enum hal_rf_type	RFType;
 	u8			ROMVer;
 };
 
 /*  Get element */
 #define GET_CVID_IC_TYPE(version)	((version).ICType)
 #define GET_CVID_CHIP_TYPE(version)	((version).ChipType)
-#define GET_CVID_RF_TYPE(version)	((version).RFType)
 #define GET_CVID_MANUFACTUER(version)	((version).VendorType)
 #define GET_CVID_CUT_VERSION(version)	((version).CUTVersion)
 #define GET_CVID_ROM_VERSION(version)	(((version).ROMVer) & ROM_VERSION_MASK)
@@ -108,17 +95,8 @@ struct hal_version {
 #define IS_CHIP_VENDOR_UMC(version)		\
 	((GET_CVID_MANUFACTUER(version) == CHIP_VENDOR_UMC) ? true : false)
 
-#define IS_1T1R(version)			\
-	((GET_CVID_RF_TYPE(version) == RF_TYPE_1T1R) ? true : false)
-#define IS_1T2R(version)			\
-	((GET_CVID_RF_TYPE(version) == RF_TYPE_1T2R) ? true : false)
-#define IS_2T2R(version)			\
-	((GET_CVID_RF_TYPE(version) == RF_TYPE_2T2R) ? true : false)
-
 /* Chip version Macro. -- */
 
-#define IS_92C_SERIAL(version)					\
-	((IS_81XXC(version) && IS_2T2R(version)) ? true : false)
 #define IS_81xxC_VENDOR_UMC_A_CUT(version)			\
 	(IS_81XXC(version)?(IS_CHIP_VENDOR_UMC(version) ?	\
 	(IS_A_CUT(version) ? true : false) : false) : false)

drivers/staging/rtl8723au/include/hal_com.h

@@ -116,7 +116,6 @@
 #define REG_NOA_DESC_COUNT			0x05EC
 
 #include "HalVerDef.h"
-void dump_chip_info23a(struct hal_version	ChipVersion);
 
 
 u8	/* return the final channel plan decision */