Merge tag 'pci-v4.19-fixes-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Bjorn writes:
  "PCI fixes:

  - Fix ACPI hotplug issue that causes black screen crash at boot (Mika
    Westerberg)

  - Fix DesignWare "scheduling while atomic" issues (Jisheng Zhang)

  - Add PPC contacts to MAINTAINERS for PCI core error handling (Bjorn
    Helgaas)

  - Sort Mobiveil MAINTAINERS entry (Lorenzo Pieralisi)"

* tag 'pci-v4.19-fixes-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
  PCI: dwc: Fix scheduling while atomic issues
  MAINTAINERS: Move mobiveil PCI driver entry where it belongs
  MAINTAINERS: Update PPC contacts for PCI core error handling

MAINTAINERS

@@ -9716,13 +9716,6 @@ Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 S:	Maintained
 F:	drivers/media/dvb-frontends/mn88473*
 
-PCI DRIVER FOR MOBIVEIL PCIE IP
-M:	Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
-L:	linux-pci@vger.kernel.org
-S:	Supported
-F:	Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
-F:	drivers/pci/controller/pcie-mobiveil.c
-
 MODULE SUPPORT
 M:	Jessica Yu <jeyu@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next
@@ -11137,6 +11130,13 @@ F:	include/uapi/linux/switchtec_ioctl.h
 F:	include/linux/switchtec.h
 F:	drivers/ntb/hw/mscc/
 
+PCI DRIVER FOR MOBIVEIL PCIE IP
+M:	Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
+L:	linux-pci@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
+F:	drivers/pci/controller/pcie-mobiveil.c
+
 PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
 M:	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 M:	Jason Cooper <jason@lakedaemon.net>
@@ -11203,8 +11203,14 @@ F:	tools/pci/
 
 PCI ENHANCED ERROR HANDLING (EEH) FOR POWERPC
 M:	Russell Currey <ruscur@russell.cc>
+M:	Sam Bobroff <sbobroff@linux.ibm.com>
+M:	Oliver O'Halloran <oohall@gmail.com>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
+F:	Documentation/PCI/pci-error-recovery.txt
+F:	drivers/pci/pcie/aer.c
+F:	drivers/pci/pcie/dpc.c
+F:	drivers/pci/pcie/err.c
 F:	Documentation/powerpc/eeh-pci-error-recovery.txt
 F:	arch/powerpc/kernel/eeh*.c
 F:	arch/powerpc/platforms/*/eeh*.c

drivers/pci/controller/dwc/pcie-designware.c

@@ -135,7 +135,7 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
 		if (val & PCIE_ATU_ENABLE)
 			return;
 
-		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+		mdelay(LINK_WAIT_IATU);
 	}
 	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
 }
@@ -178,7 +178,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
 		if (val & PCIE_ATU_ENABLE)
 			return;
 
-		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+		mdelay(LINK_WAIT_IATU);
 	}
 	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
 }
@@ -236,7 +236,7 @@ static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
 		if (val & PCIE_ATU_ENABLE)
 			return 0;
 
-		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+		mdelay(LINK_WAIT_IATU);
 	}
 	dev_err(pci->dev, "Inbound iATU is not being enabled\n");
 
@@ -282,7 +282,7 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
 		if (val & PCIE_ATU_ENABLE)
 			return 0;
 
-		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+		mdelay(LINK_WAIT_IATU);
 	}
 	dev_err(pci->dev, "Inbound iATU is not being enabled\n");
 

drivers/pci/controller/dwc/pcie-designware.h

@@ -26,8 +26,7 @@
 
 /* Parameters for the waiting for iATU enabled routine */
 #define LINK_WAIT_MAX_IATU_RETRIES	5
-#define LINK_WAIT_IATU_MIN		9000
-#define LINK_WAIT_IATU_MAX		10000
+#define LINK_WAIT_IATU			9
 
 /* Synopsys-specific PCIe configuration registers */
 #define PCIE_PORT_LINK_CONTROL		0x710

drivers/pci/hotplug/acpiphp_glue.c

@@ -457,17 +457,18 @@ static void acpiphp_native_scan_bridge(struct pci_dev *bridge)
 /**
  * enable_slot - enable, configure a slot
  * @slot: slot to be enabled
+ * @bridge: true if enable is for the whole bridge (not a single slot)
  *
  * This function should be called per *physical slot*,
  * not per each slot object in ACPI namespace.
  */
-static void enable_slot(struct acpiphp_slot *slot)
+static void enable_slot(struct acpiphp_slot *slot, bool bridge)
 {
 	struct pci_dev *dev;
 	struct pci_bus *bus = slot->bus;
 	struct acpiphp_func *func;
 
-	if (bus->self && hotplug_is_native(bus->self)) {
+	if (bridge && bus->self && hotplug_is_native(bus->self)) {
 		/*
 		 * If native hotplug is used, it will take care of hotplug
 		 * slot management and resource allocation for hotplug
@@ -701,7 +702,7 @@ static void acpiphp_check_bridge(struct acpiphp_bridge *bridge)
 					trim_stale_devices(dev);
 
 			/* configure all functions */
-			enable_slot(slot);
+			enable_slot(slot, true);
 		} else {
 			disable_slot(slot);
 		}
@@ -785,7 +786,7 @@ static void hotplug_event(u32 type, struct acpiphp_context *context)
 		if (bridge)
 			acpiphp_check_bridge(bridge);
 		else if (!(slot->flags & SLOT_IS_GOING_AWAY))
-			enable_slot(slot);
+			enable_slot(slot, false);
 
 		break;
 
@@ -973,7 +974,7 @@ int acpiphp_enable_slot(struct acpiphp_slot *slot)
 
 	/* configure all functions */
 	if (!(slot->flags & SLOT_ENABLED))
-		enable_slot(slot);
+		enable_slot(slot, false);
 
 	pci_unlock_rescan_remove();
 	return 0;