Staging: comedi: fl512: Checkpatch cleanups

This fixes all checkpatch issues in the fl512 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/comedi/drivers/fl512.c

@@ -76,8 +76,8 @@ static int fl512_ai_insn(struct comedi_device *dev,
 	unsigned long iobase = dev->iobase;
 
 	for (n = 0; n < insn->n; n++) {	/* sample n times on selected channel */
-		/* XXX probably can move next step out of for() loop -- will make
-		 * AI a little bit faster. */
+		/* XXX probably can move next step out of for() loop -- will
+		 * make AI a little bit faster. */
 		outb(chan, iobase + 2);	/* select chan */
 		outb(0, iobase + 3);	/* start conversion */
 		/* XXX should test "done" flag instead of delay */
@@ -101,8 +101,10 @@ static int fl512_ao_insn(struct comedi_device *dev,
 	unsigned long iobase = dev->iobase;	/* get base address  */
 
 	for (n = 0; n < insn->n; n++) {	/* write n data set */
-		outb(data[n] & 0x0ff, iobase + 4 + 2 * chan);	/* write low byte   */
-		outb((data[n] & 0xf00) >> 8, iobase + 4 + 2 * chan);	/* write high byte  */
+		/* write low byte   */
+		outb(data[n] & 0x0ff, iobase + 4 + 2 * chan);
+		/* write high byte  */
+		outb((data[n] & 0xf00) >> 8, iobase + 4 + 2 * chan);
 		inb(iobase + 4 + 2 * chan);	/* trig */
 
 		devpriv->ao_readback[chan] = data[n];
@@ -121,9 +123,8 @@ static int fl512_ao_insn_readback(struct comedi_device *dev,
 	int n;
 	int chan = CR_CHAN(insn->chanspec);
 
-	for (n = 0; n < insn->n; n++) {
+	for (n = 0; n < insn->n; n++)
 		data[n] = devpriv->ao_readback[chan];
-	}
 
 	return n;
 }
@@ -134,13 +135,15 @@ static int fl512_ao_insn_readback(struct comedi_device *dev,
 static int fl512_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	unsigned long iobase;
-	struct comedi_subdevice *s;	/* pointer to the subdevice:
-					   Analog in, Analog out, ( not made ->and Digital IO) */
+
+	/* pointer to the subdevice: Analog in, Analog out,
+	   (not made ->and Digital IO) */
+	struct comedi_subdevice *s;
 
 	iobase = it->options[0];
-	printk("comedi:%d fl512: 0x%04lx", dev->minor, iobase);
+	printk(KERN_INFO "comedi:%d fl512: 0x%04lx", dev->minor, iobase);
 	if (!request_region(iobase, FL512_SIZE, "fl512")) {
-		printk(" I/O port conflict\n");
+		printk(KERN_WARNING " I/O port conflict\n");
 		return -EIO;
 	}
 	dev->iobase = iobase;
@@ -149,7 +152,7 @@ static int fl512_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		return -ENOMEM;
 
 #if DEBUG
-	printk("malloc ok\n");
+	printk(KERN_DEBUG "malloc ok\n");
 #endif
 
 	if (alloc_subdevices(dev, 2) < 0)
@@ -160,24 +163,37 @@ static int fl512_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	 */
 	/* Analog indput */
 	s = dev->subdevices + 0;
-	s->type = COMEDI_SUBD_AI;	/* define subdevice as Analog In   */
-	s->subdev_flags = SDF_READABLE | SDF_GROUND;	/* you can read it from userspace  */
-	s->n_chan = 16;		/* Number of Analog input channels */
-	s->maxdata = 0x0fff;	/* accept only 12 bits of data     */
-	s->range_table = &range_fl512;	/* device use one of the ranges    */
-	s->insn_read = fl512_ai_insn;	/* function to call when read AD   */
-	printk("comedi: fl512: subdevice 0 initialized\n");
+	/* define subdevice as Analog In */
+	s->type = COMEDI_SUBD_AI;
+	/* you can read it from userspace */
+	s->subdev_flags = SDF_READABLE | SDF_GROUND;
+	/* Number of Analog input channels */
+	s->n_chan = 16;
+	/* accept only 12 bits of data */
+	s->maxdata = 0x0fff;
+	/* device use one of the ranges */
+	s->range_table = &range_fl512;
+	/* function to call when read AD */
+	s->insn_read = fl512_ai_insn;
+	printk(KERN_INFO "comedi: fl512: subdevice 0 initialized\n");
 
 	/* Analog output */
 	s = dev->subdevices + 1;
-	s->type = COMEDI_SUBD_AO;	/* define subdevice as Analog OUT   */
-	s->subdev_flags = SDF_WRITABLE;	/* you can write it from userspace  */
-	s->n_chan = 2;		/* Number of Analog output channels */
-	s->maxdata = 0x0fff;	/* accept only 12 bits of data      */
-	s->range_table = &range_fl512;	/* device use one of the ranges     */
-	s->insn_write = fl512_ao_insn;	/* function to call when write DA   */
-	s->insn_read = fl512_ao_insn_readback;	/* function to call when reading DA   */
-	printk("comedi: fl512: subdevice 1 initialized\n");
+	/* define subdevice as Analog OUT */
+	s->type = COMEDI_SUBD_AO;
+	/* you can write it from userspace */
+	s->subdev_flags = SDF_WRITABLE;
+	/* Number of Analog output channels */
+	s->n_chan = 2;
+	/* accept only 12 bits of data */
+	s->maxdata = 0x0fff;
+	/* device use one of the ranges */
+	s->range_table = &range_fl512;
+	/* function to call when write DA */
+	s->insn_write = fl512_ao_insn;
+	/* function to call when reading DA */
+	s->insn_read = fl512_ao_insn_readback;
+	printk(KERN_INFO "comedi: fl512: subdevice 1 initialized\n");
 
 	return 1;
 }
@@ -186,6 +202,6 @@ static int fl512_detach(struct comedi_device *dev)
 {
 	if (dev->iobase)
 		release_region(dev->iobase, FL512_SIZE);
-	printk("comedi%d: fl512: dummy i detach\n", dev->minor);
+	printk(KERN_INFO "comedi%d: fl512: dummy i detach\n", dev->minor);
 	return 0;
 }