Commit 2822e66b authored by Kuninori Morimoto's avatar Kuninori Morimoto Committed by Mark Brown

ASoC: wm9090: replace codec to component

Now we can replace Codec to Component. Let's do it.

Note:
	xxx_codec_xxx()		->	xxx_component_xxx()
	.idle_bias_off = 0	->	.idle_bias_on = 1
	.ignore_pmdown_time = 0	->	.use_pmdown_time = 1
	-			->	.endianness = 1
	-			->	.non_legacy_dai_naming = 1
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 7928b2cb
...@@ -143,23 +143,23 @@ static bool wm9090_readable(struct device *dev, unsigned int reg) ...@@ -143,23 +143,23 @@ static bool wm9090_readable(struct device *dev, unsigned int reg)
} }
} }
static void wait_for_dc_servo(struct snd_soc_codec *codec) static void wait_for_dc_servo(struct snd_soc_component *component)
{ {
unsigned int reg; unsigned int reg;
int count = 0; int count = 0;
dev_dbg(codec->dev, "Waiting for DC servo...\n"); dev_dbg(component->dev, "Waiting for DC servo...\n");
do { do {
count++; count++;
msleep(1); msleep(1);
reg = snd_soc_read(codec, WM9090_DC_SERVO_READBACK_0); reg = snd_soc_component_read32(component, WM9090_DC_SERVO_READBACK_0);
dev_dbg(codec->dev, "DC servo status: %x\n", reg); dev_dbg(component->dev, "DC servo status: %x\n", reg);
} while ((reg & WM9090_DCS_CAL_COMPLETE_MASK) } while ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
!= WM9090_DCS_CAL_COMPLETE_MASK && count < 1000); != WM9090_DCS_CAL_COMPLETE_MASK && count < 1000);
if ((reg & WM9090_DCS_CAL_COMPLETE_MASK) if ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
!= WM9090_DCS_CAL_COMPLETE_MASK) != WM9090_DCS_CAL_COMPLETE_MASK)
dev_err(codec->dev, "Timed out waiting for DC Servo\n"); dev_err(component->dev, "Timed out waiting for DC Servo\n");
} }
static const DECLARE_TLV_DB_RANGE(in_tlv, static const DECLARE_TLV_DB_RANGE(in_tlv,
...@@ -251,22 +251,22 @@ SOC_SINGLE_TLV("MIXOUTR IN2B Volume", WM9090_OUTPUT_MIXER4, 0, 3, 1, ...@@ -251,22 +251,22 @@ SOC_SINGLE_TLV("MIXOUTR IN2B Volume", WM9090_OUTPUT_MIXER4, 0, 3, 1,
static int hp_ev(struct snd_soc_dapm_widget *w, static int hp_ev(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event) struct snd_kcontrol *kcontrol, int event)
{ {
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
unsigned int reg = snd_soc_read(codec, WM9090_ANALOGUE_HP_0); unsigned int reg = snd_soc_component_read32(component, WM9090_ANALOGUE_HP_0);
switch (event) { switch (event) {
case SND_SOC_DAPM_POST_PMU: case SND_SOC_DAPM_POST_PMU:
snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1, snd_soc_component_update_bits(component, WM9090_CHARGE_PUMP_1,
WM9090_CP_ENA, WM9090_CP_ENA); WM9090_CP_ENA, WM9090_CP_ENA);
msleep(5); msleep(5);
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA, WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA); WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA);
reg |= WM9090_HPOUT1L_DLY | WM9090_HPOUT1R_DLY; reg |= WM9090_HPOUT1L_DLY | WM9090_HPOUT1R_DLY;
snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg); snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
/* Start the DC servo. We don't currently use the /* Start the DC servo. We don't currently use the
* ability to save the state since we don't have full * ability to save the state since we don't have full
...@@ -274,16 +274,16 @@ static int hp_ev(struct snd_soc_dapm_widget *w, ...@@ -274,16 +274,16 @@ static int hp_ev(struct snd_soc_dapm_widget *w,
* DC offsets; see the WM8904 driver for an example of * DC offsets; see the WM8904 driver for an example of
* doing so. * doing so.
*/ */
snd_soc_write(codec, WM9090_DC_SERVO_0, snd_soc_component_write(component, WM9090_DC_SERVO_0,
WM9090_DCS_ENA_CHAN_0 | WM9090_DCS_ENA_CHAN_0 |
WM9090_DCS_ENA_CHAN_1 | WM9090_DCS_ENA_CHAN_1 |
WM9090_DCS_TRIG_STARTUP_1 | WM9090_DCS_TRIG_STARTUP_1 |
WM9090_DCS_TRIG_STARTUP_0); WM9090_DCS_TRIG_STARTUP_0);
wait_for_dc_servo(codec); wait_for_dc_servo(component);
reg |= WM9090_HPOUT1R_OUTP | WM9090_HPOUT1R_RMV_SHORT | reg |= WM9090_HPOUT1R_OUTP | WM9090_HPOUT1R_RMV_SHORT |
WM9090_HPOUT1L_OUTP | WM9090_HPOUT1L_RMV_SHORT; WM9090_HPOUT1L_OUTP | WM9090_HPOUT1L_RMV_SHORT;
snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg); snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
break; break;
case SND_SOC_DAPM_PRE_PMD: case SND_SOC_DAPM_PRE_PMD:
...@@ -294,15 +294,15 @@ static int hp_ev(struct snd_soc_dapm_widget *w, ...@@ -294,15 +294,15 @@ static int hp_ev(struct snd_soc_dapm_widget *w,
WM9090_HPOUT1R_DLY | WM9090_HPOUT1R_DLY |
WM9090_HPOUT1R_OUTP); WM9090_HPOUT1R_OUTP);
snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg); snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
snd_soc_write(codec, WM9090_DC_SERVO_0, 0); snd_soc_component_write(component, WM9090_DC_SERVO_0, 0);
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA, WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
0); 0);
snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1, snd_soc_component_update_bits(component, WM9090_CHARGE_PUMP_1,
WM9090_CP_ENA, 0); WM9090_CP_ENA, 0);
break; break;
} }
...@@ -419,10 +419,10 @@ static const struct snd_soc_dapm_route audio_map_in2_diff[] = { ...@@ -419,10 +419,10 @@ static const struct snd_soc_dapm_route audio_map_in2_diff[] = {
{ "IN2A PGA", NULL, "IN2-" }, { "IN2A PGA", NULL, "IN2-" },
}; };
static int wm9090_add_controls(struct snd_soc_codec *codec) static int wm9090_add_controls(struct snd_soc_component *component)
{ {
struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec); struct wm9090_priv *wm9090 = snd_soc_component_get_drvdata(component);
struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec); struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
int i; int i;
snd_soc_dapm_new_controls(dapm, wm9090_dapm_widgets, snd_soc_dapm_new_controls(dapm, wm9090_dapm_widgets,
...@@ -430,7 +430,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec) ...@@ -430,7 +430,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map)); snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
snd_soc_add_codec_controls(codec, wm9090_controls, snd_soc_add_component_controls(component, wm9090_controls,
ARRAY_SIZE(wm9090_controls)); ARRAY_SIZE(wm9090_controls));
if (wm9090->pdata.lin1_diff) { if (wm9090->pdata.lin1_diff) {
...@@ -439,7 +439,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec) ...@@ -439,7 +439,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
} else { } else {
snd_soc_dapm_add_routes(dapm, audio_map_in1_se, snd_soc_dapm_add_routes(dapm, audio_map_in1_se,
ARRAY_SIZE(audio_map_in1_se)); ARRAY_SIZE(audio_map_in1_se));
snd_soc_add_codec_controls(codec, wm9090_in1_se_controls, snd_soc_add_component_controls(component, wm9090_in1_se_controls,
ARRAY_SIZE(wm9090_in1_se_controls)); ARRAY_SIZE(wm9090_in1_se_controls));
} }
...@@ -449,18 +449,18 @@ static int wm9090_add_controls(struct snd_soc_codec *codec) ...@@ -449,18 +449,18 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
} else { } else {
snd_soc_dapm_add_routes(dapm, audio_map_in2_se, snd_soc_dapm_add_routes(dapm, audio_map_in2_se,
ARRAY_SIZE(audio_map_in2_se)); ARRAY_SIZE(audio_map_in2_se));
snd_soc_add_codec_controls(codec, wm9090_in2_se_controls, snd_soc_add_component_controls(component, wm9090_in2_se_controls,
ARRAY_SIZE(wm9090_in2_se_controls)); ARRAY_SIZE(wm9090_in2_se_controls));
} }
if (wm9090->pdata.agc_ena) { if (wm9090->pdata.agc_ena) {
for (i = 0; i < ARRAY_SIZE(wm9090->pdata.agc); i++) for (i = 0; i < ARRAY_SIZE(wm9090->pdata.agc); i++)
snd_soc_write(codec, WM9090_AGC_CONTROL_0 + i, snd_soc_component_write(component, WM9090_AGC_CONTROL_0 + i,
wm9090->pdata.agc[i]); wm9090->pdata.agc[i]);
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3, snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_3,
WM9090_AGC_ENA, WM9090_AGC_ENA); WM9090_AGC_ENA, WM9090_AGC_ENA);
} else { } else {
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3, snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_3,
WM9090_AGC_ENA, 0); WM9090_AGC_ENA, 0);
} }
...@@ -472,19 +472,19 @@ static int wm9090_add_controls(struct snd_soc_codec *codec) ...@@ -472,19 +472,19 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
* The machine driver should call this from their set_bias_level; if there * The machine driver should call this from their set_bias_level; if there
* isn't one then this can just be set as the set_bias_level function. * isn't one then this can just be set as the set_bias_level function.
*/ */
static int wm9090_set_bias_level(struct snd_soc_codec *codec, static int wm9090_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level) enum snd_soc_bias_level level)
{ {
struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec); struct wm9090_priv *wm9090 = snd_soc_component_get_drvdata(component);
switch (level) { switch (level) {
case SND_SOC_BIAS_ON: case SND_SOC_BIAS_ON:
break; break;
case SND_SOC_BIAS_PREPARE: case SND_SOC_BIAS_PREPARE:
snd_soc_update_bits(codec, WM9090_ANTIPOP2, WM9090_VMID_ENA, snd_soc_component_update_bits(component, WM9090_ANTIPOP2, WM9090_VMID_ENA,
WM9090_VMID_ENA); WM9090_VMID_ENA);
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
WM9090_BIAS_ENA | WM9090_BIAS_ENA |
WM9090_VMID_RES_MASK, WM9090_VMID_RES_MASK,
WM9090_BIAS_ENA | WM9090_BIAS_ENA |
...@@ -493,7 +493,7 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec, ...@@ -493,7 +493,7 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
break; break;
case SND_SOC_BIAS_STANDBY: case SND_SOC_BIAS_STANDBY:
if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
/* Restore the register cache */ /* Restore the register cache */
regcache_sync(wm9090->regmap); regcache_sync(wm9090->regmap);
} }
...@@ -502,9 +502,9 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec, ...@@ -502,9 +502,9 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
* ground referenced outputs and class D speaker mean that * ground referenced outputs and class D speaker mean that
* latency is not an issue. * latency is not an issue.
*/ */
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1, snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
WM9090_BIAS_ENA | WM9090_VMID_RES_MASK, 0); WM9090_BIAS_ENA | WM9090_VMID_RES_MASK, 0);
snd_soc_update_bits(codec, WM9090_ANTIPOP2, snd_soc_component_update_bits(component, WM9090_ANTIPOP2,
WM9090_VMID_ENA, 0); WM9090_VMID_ENA, 0);
break; break;
...@@ -515,45 +515,49 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec, ...@@ -515,45 +515,49 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
return 0; return 0;
} }
static int wm9090_probe(struct snd_soc_codec *codec) static int wm9090_probe(struct snd_soc_component *component)
{ {
/* Configure some defaults; they will be written out when we /* Configure some defaults; they will be written out when we
* bring the bias up. * bring the bias up.
*/ */
snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_A_VOLUME, snd_soc_component_update_bits(component, WM9090_IN1_LINE_INPUT_A_VOLUME,
WM9090_IN1_VU | WM9090_IN1A_ZC, WM9090_IN1_VU | WM9090_IN1A_ZC,
WM9090_IN1_VU | WM9090_IN1A_ZC); WM9090_IN1_VU | WM9090_IN1A_ZC);
snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_B_VOLUME, snd_soc_component_update_bits(component, WM9090_IN1_LINE_INPUT_B_VOLUME,
WM9090_IN1_VU | WM9090_IN1B_ZC, WM9090_IN1_VU | WM9090_IN1B_ZC,
WM9090_IN1_VU | WM9090_IN1B_ZC); WM9090_IN1_VU | WM9090_IN1B_ZC);
snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_A_VOLUME, snd_soc_component_update_bits(component, WM9090_IN2_LINE_INPUT_A_VOLUME,
WM9090_IN2_VU | WM9090_IN2A_ZC, WM9090_IN2_VU | WM9090_IN2A_ZC,
WM9090_IN2_VU | WM9090_IN2A_ZC); WM9090_IN2_VU | WM9090_IN2A_ZC);
snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_B_VOLUME, snd_soc_component_update_bits(component, WM9090_IN2_LINE_INPUT_B_VOLUME,
WM9090_IN2_VU | WM9090_IN2B_ZC, WM9090_IN2_VU | WM9090_IN2B_ZC,
WM9090_IN2_VU | WM9090_IN2B_ZC); WM9090_IN2_VU | WM9090_IN2B_ZC);
snd_soc_update_bits(codec, WM9090_SPEAKER_VOLUME_LEFT, snd_soc_component_update_bits(component, WM9090_SPEAKER_VOLUME_LEFT,
WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC, WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC,
WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC); WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC);
snd_soc_update_bits(codec, WM9090_LEFT_OUTPUT_VOLUME, snd_soc_component_update_bits(component, WM9090_LEFT_OUTPUT_VOLUME,
WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC, WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC,
WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC); WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC);
snd_soc_update_bits(codec, WM9090_RIGHT_OUTPUT_VOLUME, snd_soc_component_update_bits(component, WM9090_RIGHT_OUTPUT_VOLUME,
WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC, WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC,
WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC); WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC);
snd_soc_update_bits(codec, WM9090_CLOCKING_1, snd_soc_component_update_bits(component, WM9090_CLOCKING_1,
WM9090_TOCLK_ENA, WM9090_TOCLK_ENA); WM9090_TOCLK_ENA, WM9090_TOCLK_ENA);
wm9090_add_controls(codec); wm9090_add_controls(component);
return 0; return 0;
} }
static const struct snd_soc_codec_driver soc_codec_dev_wm9090 = { static const struct snd_soc_component_driver soc_component_dev_wm9090 = {
.probe = wm9090_probe, .probe = wm9090_probe,
.set_bias_level = wm9090_set_bias_level, .set_bias_level = wm9090_set_bias_level,
.suspend_bias_off = true, .suspend_bias_off = 1,
.idle_bias_on = 1,
.use_pmdown_time = 1,
.endianness = 1,
.non_legacy_dai_naming = 1,
}; };
static const struct regmap_config wm9090_regmap = { static const struct regmap_config wm9090_regmap = {
...@@ -607,8 +611,8 @@ static int wm9090_i2c_probe(struct i2c_client *i2c, ...@@ -607,8 +611,8 @@ static int wm9090_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, wm9090); i2c_set_clientdata(i2c, wm9090);
ret = snd_soc_register_codec(&i2c->dev, ret = devm_snd_soc_register_component(&i2c->dev,
&soc_codec_dev_wm9090, NULL, 0); &soc_component_dev_wm9090, NULL, 0);
if (ret != 0) { if (ret != 0) {
dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
return ret; return ret;
...@@ -617,12 +621,6 @@ static int wm9090_i2c_probe(struct i2c_client *i2c, ...@@ -617,12 +621,6 @@ static int wm9090_i2c_probe(struct i2c_client *i2c,
return 0; return 0;
} }
static int wm9090_i2c_remove(struct i2c_client *i2c)
{
snd_soc_unregister_codec(&i2c->dev);
return 0;
}
static const struct i2c_device_id wm9090_id[] = { static const struct i2c_device_id wm9090_id[] = {
{ "wm9090", 0 }, { "wm9090", 0 },
{ "wm9093", 0 }, { "wm9093", 0 },
...@@ -635,7 +633,6 @@ static struct i2c_driver wm9090_i2c_driver = { ...@@ -635,7 +633,6 @@ static struct i2c_driver wm9090_i2c_driver = {
.name = "wm9090", .name = "wm9090",
}, },
.probe = wm9090_i2c_probe, .probe = wm9090_i2c_probe,
.remove = wm9090_i2c_remove,
.id_table = wm9090_id, .id_table = wm9090_id,
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment